COMPUTER ORGANISATION

Lecturer: Rubben Nambinga

Email: [email protected]
Lesson Objectives
At the end of this lesson you will be able to:
• Understand what a computer memory is
• Understand why a computer memory is needed
• Understand the features of memory
• Understand the classification of memory
• Understand the characteristics of DRAM
Chapter 1: Introduction to Computer Memory
What is computer memory?
• Computer memory is any physical device, used to store data,
information or instruction temporarily or permanently.
• It is the collection of storage units that stores binary information in
the form of bits.
• The memory block is split into a small number of components, called
cells.
• Each cell has a unique address to store the data in memory.
Chapter 1: Introduction to Computer Memory
Why do we need a computer memory?
• In the computer system, we need computer memory to store various
types of data like text, images, video, audio, documents, etc.
• We can retrieve it when the data is required.
Chapter 1: Introduction to Computer Memory
Features of Memory
Location:
• It represents the internal or external location of the memory in a
computer.
• The internal memory is inbuilt in computer memory. It is also known
as primary memory.
• The example of primary memory are registers, cache and main
memory. Whereas, external memory is the separate storage device
from the computer, such as disk, tape, USB pen drive.
Chapter 1: Introduction to Computer Memory
Features of Memory
Capacity:
• It is the most important feature of computer memory.
• Storage capacity can vary in external and internal memory.
• The storage word length can vary in bits, such as 8, 16 or 32 bits.
Chapter 1: Introduction to Computer Memory
Features of Memory
Access Methods:
Memory can be accessed through four modes of memory.
• DMA: As the name specifies, Direct Memory Address (DMA) is a method that allows
input/output (I/O) devices to access or retrieve data directly or from the main memory.
• Sequential Access Method: The sequential access method is used in a data storage
device to read stored data sequentially from the computer memory. Whereas, the data
received from random access memory (RAM) can be in any order.
• Random Access Method: It is a method used to randomly access data from memory.
This method is the opposite of SAM. For example, to go from A to Z in random access, we
can directly jump to any specified location. In the Sequential method, we have to follow
all intervening from A to Z to reach at the particular memory location.
• Associative Access Method: It is a special type of memory that optimizes search
performance through defined data to directly access the stored information based on a
memory address.
Chapter 1: Introduction to Computer Memory
Features of Memory
• Performance:
The performance of memory is majorly divided into three parts.
o Access Time: In random access memory, it represents the total time taken by
memory devices to perform a read or write operation that an address is sent
to memory.
o Memory Cycle Time: Total time required to access memory block and
additional required time before starting second access.
o Transfer rate: It describes the transfer rate of data used to transmit memory
to or from an external or internal memory device. Bit transfer can be different
for different external and internal devices.
Chapter 1: Introduction to Computer Memory
Features of Memory
• Physical types: It defines the physical type of memory used in a
computer such as magnetic, semiconductor, magneto-optical and
optical.
• Physical characteristics: It specifies the physical behavior of the
memory like volatile, non-volatile or non-erasable memory.
Chapter 1: Introduction to Computer Memory
Classification of Memory
Chapter 1: Introduction to Computer Memory
Classification of Memory
Primary or Main Memory
• Primary memory is also known as the computer system's main memory that
communicates directly within the CPU, Auxiliary memory, and the Cache memory.
• Main memory is used to keep programs or data when the processor is active to
use them.
• The primary memory is volatile, which means the data in memory can be lost if it
is not saved when a power failure occurs.
• It is costlier than secondary memory, and the main memory capacity is limited as
compared to secondary memory.
The primary memory is further divided into two parts:
RAM (Random Access Memory)
ROM (Read Only Memory)
Chapter 1: Introduction to Computer Memory
Classification of Memory
Primary or Main Memory - Random Access Memory (RAM)
• RAM is one of the faster types of main memory accessed directly by
the CPU.
• It is the hardware in a computer device to temporarily store data,
programs or program results.
• It is volatile, which means if a power failure occurs or the computer is
turned off, the information stored in RAM will be lost.
• All data stored in computer memory can be read or accessed
randomly at any time.
Chapter 1: Introduction to Computer Memory
Classification of Memory
Primary or Main Memory - Random Access Memory (RAM)
There are two types of RAM:
• SRAM
• DRAM
Chapter 1: Introduction to Computer Memory
Classification of Memory
Primary or Main Memory - Random Access Memory (RAM) – DRAM
• Dynamic Random-Access Memory is a type of RAM that is used for
the dynamic storage of data in RAM.
• In DRAM, each cell carries one-bit information.
• The cell is made up of two parts: a capacitor and a transistor.
• The size of the capacitor and the transistor is so small, requiring
millions of them to store on a single chip.
• Hence, a DRAM chip can hold more data than an SRAM chip of the
same size. However, the capacitor needs to be continuously refreshed
to retain information because DRAM is volatile. If the power is
switched off, the data store in memory is lost.
Chapter 1: Introduction to Computer Memory
Classification of Memory
Primary or Main Memory - Random Access Memory (RAM) – DRAM
Characteristics of DRAM
• It requires continuously refreshed to retain the data.
• It is slower than SRAM
• It holds a large amount of data
• It is the combination of capacitor and transistor
• It is less expensive as compared to SRAM
• Less power consumption
Chapter 1: Introduction to Computer Memory
Classification of Memory
Primary or Main Memory - Random Access Memory (RAM) – DRAM
Characteristics of DRAM
• It requires continuously refreshed to retain the data.
• It is slower than SRAM
• It holds a large amount of data
• It is the combination of capacitor and transistor
• It is less expensive as compared to SRAM
• Less power consumption
END