C•CURE 800/8000 NetVue Compatibility Matrix

Vendor API DVR/NVR C•CURE800 OS

Qualified by In Vendor 32-bit 64-bit
Software House Documentation
American 1.12.0.22925 1.5, 1.6, 1.7, beta 1.2.4.22317 to 2.1 10.3 Patch # 1 XP, 2003, Vista, 7, 2008 7, 2008 R2
Dynamics 2.1
HDVR 1.7.1.21905 1.2.4.22317, 1.4, 1.2.4.22317 to 1.6 10.1, 10.2, 10.3 XP, 2003, Vista, 7, 2008 7, 2008 R2
1.5, 1.6
American 5.01.59.103 4.3, 5.0 4.0 to 5.0 10.3 Patch # 2 XP, 2003, Vista, 7, 2008* 7, 2008 R2*
Dynamics
Intellex 5.00.74.189 4.3, 5.0 4.0 to 5.0 10.2, 10.3 XP, 2003, Vista, 7, 2008* 7, 2008 R2*
4.30.33.146 4.1, 4.2, 4.3 2.1 to 4.3 9.4 Patch # 6, 10.0, XP, 2003, Vista, 7*, 2008* 7*, 2008 R2*
10.1
4.17 4.2 2.1 to 4.2 9.4 XP, 2003, Vista
American 4.4.8.0.732.74 4.2, 4.3, 4.4 4.0 to 4.4 10.3 Patch # 2 XP, 2003, Vista, 7, 2008 7, 2008 R2
Dynamics
VideoEdge 4.3.7.0.430.62 4.2, 4.3 4.0 to 4.3 10.3 patch # 1 XP, 2003, Vista, 7, 2008 7, 2008 R2
4.20.486.67 4.0, 4.01, 4.1, 4.0 to 4.11 10.3 XP, 2003, Vista, 7, 2008 7, 2008 R2
4.11
4.2.196.11 4.1 4.0 to 4.1 10.2 Patch # 1 XP, 2003, Vista, 7, 2008 7, 2008 R2
4.1.216.32 4.01 4.0 to 4.1 10.2 XP, 2003, Vista, 7, 2008 7, 2008 R2
8.4.9 3.0.32 9.4 Patch # 4, 10.0, XP, 2003, Vista, 7*, 2008* 7*, 2008 R2*
10.1
2.0.11 2.04.42 9.4 Patch # 2 XP, 2003
2.0.9.04 2.04.42 9.4 XP, 2003
Exacq 1.12.0.22925 5.8 5.8 (and later) 10.3 Patch # 2 XP, 2003, Vista, 7, 2008 7, 2008 R2
Integral 6.5.0.159 DSXpress 4.1, 9.4, 10.0, 10.1, XP, 2003, Vista
DVXi 4.3 10.2, 10.3
Loronix 4.3 4.5 4.0, 4.3, 4.5 9.4, 10.0, 10.1, XP, 2003
10.2, 10.3
Nextiva 6.1 6.2 (qualified by partner) 10.1 XP, 2003, Vista, 7, 2008 7*
6.1 6.1 6.1 10.1, 10.2, 10.3 XP, 2003, Vista, 7, 2008 7*
6.0 6.0.4706.0 6.0.4706.0 10.0 XP, 2003, Vista
5.1 SP2 5.1.3648 9.4
Part Number: 8200-1105-02 Page 1
 C•CURE 800/8000 NetVue Compatibility Matrix

Vendor API DVR/NVR C•CURE800 OS

Qualified by In Vendor 32-bit 64-bit
Software House Documentation
NICE 10.8 NVR: 10.8 DVR: 8, 9, 10 10.1, 10.2, 10.3 XP, 2003, Vista, 7*, 2008* 7*, 2008 R2*
NVR: 10, 10.5, 10.7, 10.8
10.5 NVR: 10.5 DVR: 8.0, 9.0, 10.1 10.0 XP, 2003, Vista
NVR: 10.5
8.0.3 SP3 (Harmony) XP, 2003
10.0.0.14 (NVSat) NVSat
Pelco DX8100 3.3.0.17 1.1.00.2508 10.1, 10.2, 10.3
3.3.0.10 1.1.00.2508 10.0 XP, 2003, Vista
3.2.4 1.1.00.2508 9.4 XP, 2003
*: indicates that the Video Protocol is installed, and that the vendor and Software House do not support the Video Protocol on this operating system. However,
Software House did some tests on the Video Protocol on the operating system and the basic video features do work. If you choose to use the Video Protocol on
this operating system, it is at your own risk.

The trademarks, logos, and service marks displayed on this document are registered in the United States [or other countries]. Any misuse of the trademarks is strictly prohibited and Tyco will aggressively enforce its
intellectual property rights to the fullest extent of the law, including pursuit of criminal prosecution wherever necessary. All trademarks not owned by Tyco are the property of their respective owners, and are used with
permission or allowed under applicable laws.

Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all features. Availability varies by region; contact your sales representative.

© 2014 Tyco Security Products.

All Rights Reserved.

Part Number: 8200-1105-02 Page 2