M05 Install. SA
M05 Install. SA
NETWORKING SERVICE
LEVEL-I
Based on March 2022, Curriculum Version 1
August, 2022
Addis Ababa, Ethiopia
Table of Content
Acronyms ....................................................................................................................................... 3
Acknowledgment ........................................................................................................................... 4
Introduction to the Module ............................................................................................................ 5
Unit one: Determine software and upgrade requirements ............................................................. 6
1.1. Introduction to Computer Software .................................................................................... 7
1.2. Determining Client Requirements .................................................................................... 13
1.3. Verify the client requirement ............................................................................................ 17
1.3.1Define the software Purpose ................................................................................ 18
Self-Check –1........................................................................................................................... 20
Unit Two: Obtain software or software upgrade ......................................................................... 21
2.1Application Software .......................................................................................................... 22
2.2. License type and requirement ........................................................................................... 25
Self-Check –2........................................................................................................................... 27
Unit Three: Install or upgrade software ..................................................................................... 28
3. Installing or upgrading application software ....................................................................... 29
3.1Upgrading Software ............................................................................................................ 29
3.2 Minimal Disruption to the Client ....................................................................................... 32
3.2.1Verify Client Requirements and Client Satisfaction ........................................................ 33
3.2.2 Installation documentation and report ............................................................................ 34
3.2.3 Software Testing and Impact Analysis ........................................................................... 36
Self-Check – 3.......................................................................................................................... 38
Operation Sheet – 1 .................................................................................................................. 40
Operation Sheet – 2 .................................................................................................................. 42
LAP Test-1 ............................................................................................................................... 46
List of Reference Materials ...................................................................................................... 47
Ministry of Labor and Skills wish to extend a great thanks and appreciation to the many
representatives of TVET instructors and respective industry experts who donated their time and
expertise to the development of this Teaching, Training and Learning Materials (TTLM).
We can also say software refers to one or more computer programs and data held in the storage of
the computer for some purposes. In other words software is a set of programs, procedures,
algorithms and its documentation.
Computer software has facilitated the interaction between human beings and computers.
What are the different kinds of software?
Software refers to the computer programs, procedures and documentation that perform certain
tasks on a computer system.
Following is an extensive list of examples of the different kinds of software.
a. Application Software: Application software is that, which is designed for the
end-users and hence known as end-user programs. It employs the capabilities of a
computer to execute the tasks that the user wishes to perform on a computer
system. Look at the various examples of application software.
b. Educational Software: They are used to deliver tests and track progress. They are
used for educational purposes. Training management and classroom management
software are some examples of educational software. The software used for
purposes of edutainment, a form of entertainment that aims at educating the
masses, is also a form of educational software.
What is application software? What are the different types of application software? Know
it all along with some interesting examples of application software.
Application software utilizes the capacities of a computer directly to a dedicated task.
Application software is able to manipulate text, numbers and graphics. It can be in the form
of software focused on a certain single task like word processing, spreadsheet or playing of
audio and video files.
To be used efficiently, all computer software needs certain hardware components or other
software resources to be present on a computer. These per-requisites are known as system
requirements and are often used as a guideline as opposed to an absolute rule. Most software
defines two sets of system requirements: minimum and recommended.
Hardware Requirements
The most common set of requirements defined by any operating system or software application is
the physical computer resources, also known as hardware. A hardware requirements list is often
accompanied by a Hardware Compatibility List (HCL), especially in case of operating systems. A
hardware compatibility list is a database of hardware models and their compatibility with a
certain operating system. An HCL lists tested, compatible, and sometimes incompatible hardware
devices for a particular operating system or application.
The following sub-sections discuss the various aspects of hardware requirements.
Architecture
All computer operating systems are designed for particular computer architecture. Most software
applications are limited to particular operating systems running on particular architectures.
Although architecture-independent operating systems and applications exist, most need to be
recompiled to run on a new architecture.
I. Processing Power
The power of the Central Processing Unit (CPU) is a fundamental system
requirement for any software. Most software running on x86 architecture define
processing power as the model and the clock speed of the CPU. Many other
features of a CPU that influence its speed and power, like bus speed, cache, and
MIPS are often ignored. This definition of power is often erroneous, as AMD
Athlon and Intel Pentium CPUs at similar clock speed often have different
throughput speeds.
II. Memory
All software, when run, resides in the Random Access Memory (RAM) of a
computer. Memory requirements are defined after considering demands of the
application, operating system, supporting software and files, and other running
processes. Optimal performance of other unrelated software running on a
multi-tasking computer system is also considered when defining this requirement.
Software Requirements
a. Platform
In computing, a platform describes some sort of framework, either in hardware or
software, which allows software to run. Typical platforms include a computer's
architecture, operating system, or programming languages and their runtime
libraries.
Operating system is one of the first requirements mentioned when defining system
requirements (software). Software may not be compatible with different versions
of same line of operating systems, although some measure of backward
compatibility is often maintained. For example, most software designed for
c. Web Browser
Most web applications and software depending heavily on Internet technologies
make use of the default browser installed on system. Microsoft Internet Explorer is
a frequent choice of software running on Microsoft Windows, which makes use of
ActiveX controls, despite their vulnerabilities.
A. Software
Variables for new software and upgrade requirements includes software versions,
commercial software applications, organization-specific software, operating systems,
C. Organizational Requirements
Variables include contracting arrangements relating to information technology,
purchasing procedures, licensing requirements and supplier options, storage and retrieval
of product licenses, storage of information technology equipment and documentation and
retrieval of product licenses. In addition:
Development methods and tools will vary from very simple procedures to very advanced
computer-assisted software engineering (CASE) tools
Hardware variables common to personal computers and networks include disk space,
RAM, CPU and the operating system.
Occupational health and safety standards will vary according to company, government
and vendor requirements. Ergonomic and environmental factors must be considered.
Organizational standards may be based upon formal, well-documented methodologies
Budget constraints will limit the options available for new software.
Before you can determine new software or software upgrade requirements for a client, you
need to examine their current software and hardware environment.
I. Management Levels
Clients from different levels of management have different interests in software applications.
Strong client support and involvement and wise user decisions are essential to successful
installation and use of software applications. Users should be involved to different degrees and in
different ways depending on the managerial hierarchy.
Approving the purchase of software licenses and indicating the account from which the
money will come
Ensuring the smooth integration of manual and automated procedures
Ensuring adequate training and documentation for hands-on users.
III. Lower-level management is involved with:
Providing relevant information during the data-gathering phases concerned with the
functions that the software application will perform
Reviewing various user interface designs such as screen forms and reports
Assisting system testing and conducting acceptance testing when requested to do so
Receiving training when required and reading all appropriate user manuals
Ensuring that the supplied documentation is available and kept up-to-date
Reporting all problems once the system is operational
Making valid suggestions for enhancements and modifications to the new system.
a) Software Requirements
Software requirements and some issues surrounding them, a software requirement is,
including the different types of requirements. And deal with changing requirements and
control project scope, as well as how requirements affect design. These lessons will give
you the knowledge you need to move on to eliciting and creating good quality
requirements in the next modules.
Explore the many ways in which software requirements can be represented. the most
popular means of expressing requirements in the industry today: the user story. You will
learn how acceptance tests help to verify the stories which they accompany, and how to
create a robust product backlog. At the end of the module, you will learn how story maps
are used to organize user stories, so that you’re always putting your effort into the tasks
which makes the most impact. Analyzing creates clear, actionable, requirements which
result in high quality software with fewer errors.
Your first step is to create an outline for your software requirements specification. This may
be something you create yourself. Or you may use an existing request.
Purpose, Intended
Audience, Intended Use,
Overall Description User Needs,
Assumptions and dependence,
System Features and Requirements
Functional Requirements,
External Interface Requirement,
System Feature,
Nonfunctional Requirements
This is a basic outline and yours may contain more (or fewer) items. Now that you have an
outline, let’s fill in the blanks
Define who in your organization will have access the software and how they should use it. .
It could also include stakeholders in other departments, including leadership teams, sales,
and marketing.
Defining this now will lead to less work in the future.
b) Product Scope
What are the benefits, objectives, and goals we intend to have for this product? This should
relate to overall purpose and goal.
Describe What You Will Build?
Your next step is to give a description of what you’re going to build. Is it a new product? Is
it an add-on to a product you’ve already created? Is this going to integrate with another
product?
Why is this needed? Who is it for?
Understanding these questions on the front end makes creating the product much easier for
all involved.
c) User Needs
Describe who will use the product and how. Understanding the user of the product and their
needs is a critical part of the process.
Who will be using the product? Are they a primary or secondary user? Do you need to know
about the purchaser of the product as well as the end user? In medical devices, you will also
need to know the needs of the patient.
In order for your development team to meet the requirements properly, we MUST include as
much detail as possible. This can feel overwhelming but becomes easier as you break down
your requirements into categories. Some common categories are:
f) Functional Requirements
Functional requirements are essential to your product because, as they state, they provide
some sort of functionality..
You may also have requirements that outline how your software will interact with other
tools, which brings us to external interface requirements.
External interface requirements are specific types of functional requirements. These are
especially important when working with embedded systems. They outline how your product
will interface with other components.
There are several types of interfaces you may have requirements for, including:
User
Hardware
Software
Communications
h) System Features
System features are types of functional requirements. These are features that are required in
order for a system to function.
Once you analyses the requirements, you can easily manage them throughout your
development process.
Self-Check –1 Test
Instruction:2Answer all the questions listed below, if you have some clarifications- feel free to
ask your teacher.
1. What is computer software? (1 point)
2. What is the use of database software? (1 point)
3. What are the different types of software? (2points)
4. State the system requirement for installing window 10? (5 points)
5. What is application software? (1 point)
2.1Application Software
Once a need for software has been identified a requirement specification should be created to
specify what software is required.
For example a business identifies that they need some office productivity software that will do
word processing and spreadsheets. The requirements specification will detail all relevant
Once your supervisor has checked and approved the client's software requirements you will need
to obtain the software.
1.1Investigating and selecting application program
Information available on software products can be accessed from many sources. These
sources have varying degrees of objectivity ranging from the authoritative to the informal.
Some of common sources of information for searching a product are:
Computer magazines
Newspapers
The Internet
IT consultants
IT department
Computer suppliers
Other sources of information may include industry colleagues, contacts and organization
similar to your own.
Depending on the size and the type of your organization, you will choose one of several
different ways of collecting the software. For example, large organizations usually have a
section or a department which controls purchases and deals only with a selected number of
suppliers. In such cases, you will be provided with a catalogue of available products from
which to choose.
Such organizations also use a Purchase Requisition document (usually called a PR book)
provided by the administrative department. You will need to fill in and submit a Purchase
Order which also needs to be signed by your supervisor.
If an organization allows purchases to be made from any supplier, then you will be expected
to obtain two quotations from different suppliers and attach them to your purchase order.
Smaller organizations may require some additional tasks. For example, you may be asked to
create a Purchase Order form using a word processor and then submit it to a supplier.
There are two general types of software licenses that differ based on how they are viewed under
copyright law
Free and open source software (FOSS) licenses are often referred to as open source. FOSS
source code is available to the customer along with the software product. The customer is
usually allowed to use the source code to change the software.
Proprietary licenses are often referred to as closed source. They provide customers with
operational code. Users cannot freely alter this software. These licenses also usually restrict
reverse engineering the software's code to obtain the source code.
An open source contributor license agreement is different from a software license agreement.
See how. A more detailed list includes five types of software licenses. It makes finer distinctions
among various types of open source licenses and proprietary licenses. This list includes the
following:
A. Public domain. This software is freely available. Anyone can use and change it or
incorporate code from this software into an application. However, businesses should use
caution as altered code may not meet enterprise quality and security standards.
Companies should be wary of ambiguous licenses that appear to be public domain but
do not explicitly say so.
B. Lesser general public license. Developers can link to open source libraries within their
software and use any licensing type for the code.
C. Permissive. This type of license will establish some requirements for distribution or
modification of the software. It also has requirements for preserving license notices,
copyrights or trademarks. There are several variations of permissive licenses, including
Apache, BSD (Berkeley Source Distribution) and MIT licenses.
Different software licenses enforce different levels of restrictions on users' ability to copy,
modify and distribute code. See the five most common types.
The cost of a software license depends on the type of license, the type of software and the
pricing model. There may be a one-time fee that gives the user ownership rights to the software
program. This approach is considered the traditional way of owning software -- buying the
license up front and gaining the rights to use the software indefinitely. This type of purchase
agreement is known as a perpetual license.
Alternatively, the user may pay an initial fee followed by a subscription plan where payment is
made at regular intervals.
License costs are often based on the number of users and devices that use the software. They
may also depend on the software deployment method. Costs can increase with add-ons,
upgrades, maintenance fees and other fees. Depending on these factors, software license costs
can vary from free or nearly so, to many thousands of dollars.
Tracking software licenses and costs can be particularly difficult across virtualized servers,
mobile devices and the cloud operations.
End-user license agreements typically include basic information about the parties entering the
agreement, such as full names of the parties’ involved, contact information and address of the
parties. It also likely includes information on the following:
When the conditions of the agreement go into effect (i.e., the moment the user accepts the terms
and conditions); charges owed per user; the duration of the agreement;terms of cancellation and
terms for recovery of charges if cancelled during the period covered by the original agreement.
Directions: Answer all the questions listed below. Use the Answer sheet provided in
the next page:
_______1. __________are conditions that will ensure the correct running of a software
application.
A. Prerequisites B. Software condition C. Software Control D. All
_______2. To ensure the correct operation of their software, most software manufacturers will
specify preconditions to the functioning of their software by recommending
_____________.
A. Business Requirement B. minimum system configuration
C. Feasibility Requirement D. All
This unit will also assist you to attain the learning outcomes stated in the cover page. Specifically,
upon completion of this learning guide, you will be able to:
The term upgrade refers to the replacement of a product with a newer version of the same product.
It is most often used in computing and consumer electronics, generally meaning a replacement of
hardware, software or firmware with a newer or better version, in order to bring the system up to
date. Common software upgrades include changing the version of an operating system, of
an office suite, of an anti-virus program, or of various other tools.
Risks of Upgrading
Although developers produce upgrades in order to improve a product, there are risks
involved—including the possibility that the upgrade will worsen the product.
Upgrades of hardware involve a risk that new hardware will not be compatible with other
pieces of hardware in a system. For example, an upgrade of RAM may not be compatible
with existing RAM in a computer. Other hardware components may not be compatible
after either an upgrade or downgrade, due to the non-availability of compatible drivers for
the hardware with a specific operating system. Conversely, there is the same risk of
Silent Installation
Installation that does not display messages or windows during its progress. "Silent
installation" is not the same as "unattended installation", though it is often improperly
used as such
Unattended Installation
Installation that is performed without user interaction during its progress or, in a stricter
sense, with no user present at all, except eventually for the initial launch of the process.
An installation process usually requires a user who "attends" it to make choices at
request: accepting an EULA, specifying preferences and passwords, etc.
Some unattended installations can be driven by a script providing answers to the various
choices such as the answer file which can be used when installing Microsoft
Windows on a large number of machines.
Self-Installation
Unattended installation, without the need of initial launch of the process (i.e. Vodafone
Mobile Connect USB Modem or Huawei E220's Mobile Partner software that
self-installs from the USB port).
Clean Installation
Given the complexity of a typical installation there are many factors that may interfere
with its successful completion. In particular files that are leftover from old installations
of the same program or an unstable situation of the operating system may all act to
prevent a given program from installing and working correctly. An installation
performed in absence of such interfering factors (which may vary from program to
program) is called a clean installation. In particular, a clean operating system installation
can be performed by formatting its destination partition before the actual installation
process.
Flat Installation
An installation of a program performed from a copy (called a flat copy) of its original
media contents (mostly CDs or DVDs) to a hard drive, rather than directly from the
media. This may help in some situations where the target machine isn't able to cope with
random access reads from CD/DVD at the same time as performing the CPU-intensive
What needed?
A laptop or PC (obviously!) with at least 1GB of storage space.
A flash drive (1GB as a minimum, 2GB or above recommended).
DVD/USB flash drive with at least 1GB free space. This drive will be formatted, so
make sure it doesn't have any important files on it.
Technician PC - PC that you'll use to copy the USB flash drive
Destination PC - A PC that you'll install The Application software.
Just like when installing hardware, one important consideration when installing or upgrading
software is to try and install the software with minimal disruption to the client.
You could consider the same installation schedule as of hardware maintenance such as:
quiet periods (for example, during holiday periods)
before or after normal office hours
while the client/user is out of the office
when the client will not be needing their computer
Installation would vary depends on the software to be installed and the hardware speed. You can
check your manuals or documented procedures on how much time it would take to install specific
software for a specific hardware. You can also check the web on how much time your software
installation would take given your hardware.
Once you have known the how much time it would take for the software installation, you can now
arranged a suitable time, make sure you adhere to it or give advanced notice if you will be
delayed. Remember that clients may have scheduled their daily workload around the installation.
The use of cloning software would be another option when installing the same software’s to
several computers that needs to obtain the same software’s. Just make a clean installation of all
software’s on one computer then you can clone the other computers to obtain the same software’s
at a minimum time. It would be advisable for new computers having the same hardware
specifications.
After completing essential verification of suitability of hardware and software according to
supervisor's instructions, you have to work out when will be the most suitable time to install the
The last step which you have to do to complete the software installation process is to verify client
requirements.
Your client has invested in the software you installed, so you have to demonstrate to your client
that the program indeed does what it is supposed to do. Such a demonstration will strongly
depend on the type of software you install.
You also have to consider the level of customer's skills in operating the software. For a beginner,
you will demonstrate the very basic steps, such as how to get started and close the software. It is
also recommended that you provide some information about the appropriate training for
beginners. Some companies may provide staff trainer.
Staff Trainer
Responsible for training all staff in the use of the new software.
Provides documentation for users and ongoing support.
For more advanced users, your demonstration should display the use of features matching the
client's initial requirements.
Any demonstration which you wish to do should be planned, prepared and tested in advance, prior
to installation of the software. Performing an unplanned demonstration may lead to basic errors
which may make your customer question the quality of your work.
You should also be aware that some software programs are very complex or may contain many
components (e.g. integrated software). In such cases, conducting a demonstration covering every
element of the client's requirement would not be practical because it may take very long time. If
such programs contain some kind of built-in demonstration, you should make your customer
aware of this feature.
Write an introduction to your installation report. This should include a description of the
item being installed, its function and why it is important to install it correctly. For
example, for an oven explain how it is an appliance for the kitchen used to cook warm
meals. Explain that proper installation is necessary to avoid fires or gas leaks.
Provide a list of safety icons or images the person may encounter during the installation
process. This can include electrical dangers, possibility of gas leak or sharp edges. Explain
each danger and what picture accompanies what safety issue.
List all of the potential dangers that emerge during the installation process. This can be
electrical sparks when installing an electrical box, for example.
Create a checklist that gives the user the ability to inspect the item for installation to
ensure everything is intact prior to the installation process. Inform the reader that if
something is broken on the device, installation should not be attempted.
Write a step-by-step instructional manual that guides the reader through the entire
installation process. The manual must be detailed, so the user knows exactly what he is
doing at all time. For example, write "Unpack the device from the box and remove all of
the packaging and protective paper." Write for beginners and do not take any knowledge
for granted.
Provide detailed sketches or images of the item being installed. If the installation requires
assembly, images can be quite helpful to show the reader how pieces are attached to one
another.
Create illustrations to show the reader how specific levels, such as water or battery levels,
should appear after installation, if applicable. Illustrations can help show the reader
whether the installation is done correctly. If there is a possibility that the water or battery
levels can alter during or directly after installation, let the reader know. For example, the
water levels in a toilet bowl can alter after installation as the water needs to run its course
in the pipes.
Test Procedures
Computer Support Officer – The person who receives a technology-free statement of the user
requirements and transforms it into a computer system.
Installs and tests the software.
Once the software has been installed you need to check out its correct operation. Testing
procedures used will depend on the type of software being installed. However, for each type of
software there are three basic functions which should be tested:
Starting software
Software operation
Closing software
Starting software may involve provision of instructions on how to start the software. It may also
involve creation of shortcuts to simplify access to the software.
Testing software operation will require testing data. Data selected for testing purpose should
involve use of fundamental features of the software to demonstrate their correct operations.
Closing software will demonstrate the conclusion of the full cycle software operation. Testing all
three stages will confirm that there are no side effects in operation of any part of the software.
Such are usually the responsibilities of the Computer Support Officer.
Impact Analysis is defined as analyzing the impact of changes in the deployed product or
application. It gives the information about the areas of the system that may be affected due to the
change in the particular section or features of the application.
The impact is analyzed on Requirements, Design & Architecture, impact on Test and impact on
schedule.
A. It is done to understand the possible outcome of implementing the change. Inducing too
much functionality into a product can reduce the overall performance of the product.
Impact Analysis document can be used as a checklist. It is used to evaluate change request before
working on them. The Impact Analysis document should give details like
Directions: Answer all the questions listed below. Use the Answer sheet provided in the next
page:
_____ 1. Common APPLICATION software upgrades include changing the version of
A. Operating System B. Office Suite C. hardware D. All
_____ 2. ____________ refers to the replacement of a product with a newer version of the
same product.
A. Install B. Uninstall C. Upgrade D. None
_____ 3. For _____________, we tend to upgrade as soon as they are released since they
usually make the software more stable and reliable.
A. New software versions
B. Service releases or bug fixes
C. Old software versions
D. All
_____ 4. Which of the following is not software Upgrading Risks?
A. Upgrade will improve the product
B. The risk of incompatibility
C. The new version will contain a bug
D. All
_____ 5. Windows applications that do not require installation are often called____.
A. Portable application
B. Installable application
C. Server-based software
D. None
True or false
Operation sheet 1.2 Install or Upgrade to Microsoft office 2016 Application software
Tools and Equipment: Microsoft office 2016 and Personal Computer/Lap top
Precautions:
1. Connect the USB flash drive to your technician PC.
2. Copy Windows Setup to the USB flash drive
3. Use copy and paste the entire contents to the USB flash drive.
4. check the USB have the Setup of Microsoft Office 2016
Steps:1
1. First input the setup in (flash or DVD).
Then turn on the computer,
Open the USB drive in File Explorer, and then double-click the setup file.
Steps:3
Steps:4
Accepting the license terms, accepting the license terms screen with Accept selected
In the Choose what to keep window, select what you want to keep, and then click Next.
Then click Install now.
Quality criteria :Checking every application integrated in Microsof Office 2016 Properly install
Step 1:-In your Web Browser, click the Link to the program.
Do one of the following:
Click on the searched setup (Download)
When downloading and installing programs from the Internet, be sure you trust the publisher of
the program and the website that is offering the program.
Or
Download Adobe Acrobat Reader.
Image titled Install Adobe Acrobat Reader
Step 4
Let the Setup File install Adobe Acrobat Reader on your computer. Image titled Install Adobe
Acrobat Reader
Quality criteria :
Checking every application integrated in Microsof Office 2016 Properly install.
If the program you want to uninstall is not listed, it might not have been written for this
version of Windows.
To uninstall the program, check the information that came with the program.
Instructions: Given necessary templates, tools and materials you are required to perform the
following 1- hour.
2. You need to successfully uninstall tasks within the following application software’s.
software-installation-and-upgradecamberig university).
Douglas Adams. Dirk Gently’s Holistic Detective Agency. Pocket Books, 1987.
Jon L. Bentley and M. Douglas McIlroy. Engineering a sort function. Softw. Pract.
Exper.,
help.adobe.com/ca/acrobat/kb/install-reader-dc-windows.
2
3
4
5
6
7