Scribd
Upload
39 views2 pages

HDSL Modem Operation Notes Datasheet

The DDW-120 Ethernet SHDSL Extender allows for cost-effective Ethernet networks to be created over long distances of up to 15 km using existing copper cables. It supports data rates up to 15.3 Mbit/s. The device is designed for use in harsh industrial environments with a wide operating temperature range and transient protection. It has a long service life expectancy of 1.18 million hours and meets various industrial standards for EMC, isolation, vibration and shock.

Uploaded by

Navap
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views2 pages

HDSL Modem Operation Notes Datasheet

The DDW-120 Ethernet SHDSL Extender allows for cost-effective Ethernet networks to be created over long distances of up to 15 km using existing copper cables. It supports data rates up to 15.3 Mbit/s. The device is designed for use in harsh industrial environments with a wide operating temperature range and transient protection. It has a long service life expectancy of 1.18 million hours and meets various industrial standards for EMC, isolation, vibration and shock.

Uploaded by

Navap
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Ethernet SHDSL Extender

DDW-120
… Save time and money reusing old cables
•  Up to 15.3 Mbit/s Ethernet over twisted pair cables
•  Simple to use - no software configuration
•  Up to 15 km point-to-point solution
… Designed for use in harsh industrial applications
•  Dual 10 - 60  VDC power input
•  Total galvanic isolation
•  TBU - transient blocking unit
… Robust for long service life
•  1.180,000 hours MTBF to MIL-HDBK-217K
•  -40 to +70°C (-40 to +158°F) with no moving parts
•  Industrial EMC, shock and vibration testing
… Simple to use on industrial networking applications
•  Transparent to industrial protocols
•  Line data information and cable simulator software
•  Link fault forward function

EN 50121-4
Railway Trackside
EN 61000-6-2
Industrial Immunity
EN 61000-6-4
Industrial Emission
NEMA TS 2
Traffic Controller Assemblies
with NTCIP Requirements

The Wolverine series of Ethernet extenders allow cost effective Ethernet networks to be created over long distances,
at data rates of up to 15.3 Mbit/s.  The SHDSL technology makes it possible to reuse many types of pre-existing copper
cables.  This can lead to considerable financial savings as expensive fibre cables do not need to be installed. Dependent on
cable characteristics, distances up to 15 km (9.3 mi) can be achieved. Configuration of the DDW-120 is performed using
only DIP switches, which ensures rapid installation.
The  Wolverine DDW-120 is designed for use in heavy duty industrial applications.  The wide power range, comprehensive
diagnostics and  TBU transient protection make it ideal for installation and monitoring in industrial applications.
Only industrial grade components are used which gives the DDW-120 an MTBF of 1.180,000 hours and ensures a long
service life.  A wide operating temperature range of -40 to +70°C (-40 to +158°F) can be achieved with no moving parts.
The DDW-120 has been tested both by Westermo and external test houses to meet many EMC, isolation, vibration and
shock standards, all to the highest levels suitable for heavy industrial environments and rail trackside applications.
The DDW-120 is transparent for multicast addressing and  VLAN packets, allows  VPN pass-through for IPsec and can be
used with protocols like MODBUS/TCP and Profinet IO. Line diagnostics can be collected using a simple plug-in diagnostic
cable and DDW-tool allowing the user to determine the quality of the line in use.  With DDW-tool it is also possible to
simulate real cables with different noise models and characteristics.  The link fault forward function helps to transfer
indication of media failure onto connected ports to ensure that the DDW-120 can be used in resilient network structures.

Ordering Information
Art.no Description
3621-0110 DDW-120, Ethernet SHDSL Extender
1211-2027 Diagnostic cable (Console) (Accessories)
3125-0150 PS-60, Power supply, DIN mounted (Accessories)

DDW-120_2212_EN_REV. G
Specifications DDW-120
Dimensional drawing
34 7 115

41
82

Dimension W x H x D 34 x 123 x 122 mm (1.34 x 4.84 x 4.80)


Weight 0.2 kg
Degree of protection IP21

Power
Operating voltage 10 to 60  VDC
Rated current 330 mA at 12  VDC
155 mA at 24  VDC
  80 mA at 48  VDC

Interfaces
DSL 1 x 2 positon detachable screw terminal, 192 kbit/s to 15,3 Mbit/s
Diagnostic port 1 x 2.5 mm jack, 115.2 kbit/s
Ethernet TX 1 x RJ-45, 10 Mbit/s, 100 Mbit/s, manual or auto

Temperature
Operating -40 to +70ºC (-40 to +158ºF)
Storage & Transport -40 to +70ºC (-40 to +158ºF)

Agency approvals and standards compliance


EMC EN 61000-6-2, Immunity industrial environments
EN 61000-6-4, Emission standard for industiral environments
EN 50121-4, Railway signalling and telecommunications apparatus
Safety UL 60950-1, IT equipment
SHDSL ITU-T G.991.2, G.SHDSL and G.SHDSL.bis standard
Environmental NEMA TS 2, Traffic Controller Assemblies with NTCIP Requirements

DDW-120_2212_EN_REV. G

You might also like