Bosch Access Control

Bani Ebeid Hospital

Engineered Solutions - AMC2 - Access Modular Controller

AMC2 - Access Modular Controller

u Intelligent access manager for one to eight

entrances

u A maximum of four interfaces include the reader

power supply

u Standard 2 GB Compact Flash

u LCD display for displaying information

u A maximum of eight input and output contacts

The AMC2 (Access Modular Controller) is used as an independent authorization on access points, takes
access controller in the access control systems: access decisions, controls closing/opening elements
• BISACE (Access Engine) from version 2.0 onward and registers movement events.
• AMS (Access Management System)
• APE (Access Professional Edition). System overview

The device controls a group of one to eight access 1

points. These access points, also known as entrances,
can be:
• doors
2 2 2 2
• gates
• barriers
• turn stiles
3 3
• revolving doors
• mantraps 4 4
• ID card, PIN and biometric readers 3 3
• door opening elements
• sensors.
1 Host computer 2 AMC2
The AMC2 can control a maximum of eight ID readers
(depending on the reader type) and fully processes 3 Card reader 4 Communication and power
the access logic at the assigned entrances. supply
The controller can be connected to the host system
The analog inputs have a status recognition of the through one of the following interfaces, depending on
connected lines. the type of installation:
With RS485 operation, a maximum of eight access
The relay outputs activate the door opening elements controllers can be connected to one party line.
and/or generate the security activation and signaling. The communication between the host system and the
controller via RS485 is encrypted with up to AES256,
The AMC2 stores all necessary information in a depending on the firmware version used.
battery-buffered memory and a compact flash storage In the communication chain of a system, the access
element. Thus, even when the unit is offline, it checks controller is integrated between the host system and
the peripheral devices.
 Engineered Solutions - AMC2 - Access Modular Controller 2|5

Functions • 4 and 7 for AC.

• 5 and 7 for battery.
• Storing downloaded data as listed below:
• 6 and 7 for DC.
– Master data Otherwise, these pins will short-circuit.
– Authorizations
– Access models Quantity restrictions
– Display texts • Follow the Access Engine installation and
configuration instructions regarding the maximum
– Reader configurations number of access controllers on one access control
• Interpretation of transaction data from reader: system.
– Authorization check • The maximum number of cards that a controller can
store is 400,000, depending on the access host
– Host request
system and the license used. For further
– PIN code information, refer to the datasheets of the BIS/ACE
• Control/monitoring: and AMS access control systems.
– Denial or door release
– Switching alarm Connections to the ID card readers

– Door statuses Wiegand interfaces

The AMC2 2WCF has two connections for connecting
– Reader operation statuses
a maximum of two ID card readers.
– Internal alarm statuses The AMC2 4WCF has four connections for connecting
• Messages to Access Engine: a maximum of four ID card readers.
The element interfaces of the ID card reader and the
– Host requests
door control are divided into groups, each with reader
– Transaction data for storing interface, two input and two output contacts.
– Error and malfunction messages The following definitions apply to the Wiegand
interfaces:
– Alarm messages
• 10-wire interface (including shield).
• Power supply for:
• Maximum cable length of 158 m (500 ft) to the ID
– Readers card reader.
– Door openers RS485 interfaces
– Contact current feeds The AMC2 4R4CF has four connections for connecting
a maximum of eight ID card readers, using secure
Regulatory information OSDPv2 protocol. The interfaces are divided into two
buses. A maximum of eight readers can be connected
Region Regulatory compliance/quality marks to one interface.
Countries of Eurasian EAC RS485 interface definition:
Customs Union • 2-wire interface: Using the 10-pin pluggable
connector.
Region Regulatory compliance/quality marks • Maximum length of the bus: 1200 m.
• Transfer rates: 9.6 kbit/s.
Poland CNBOP AMC2 4WCF

CNBOP AMC2 4R4CF Reader and door models

The AMC2 controls the connected reader through
USA UL UL 294; Refer to Ordering Information predefined door models.
Door models control in accordance with the relevant
FCC Part 15 Class B; Refer to Ordering security requirements:
Information • Number and usage of the readers connected to the
AMC2, such as input and output readers, input
Installation/configuration notes readers, buttons.
Power supply • Number and application type of the AMC inputs,
An external power supply (10 to 30 V DC) for the such as door status, output button, revolving door
AMC2 is connected to the pin 1 (positive) and 3 position.
(negative). When using an uninterruptible power • Number and usage of AMC outputs, such as door
supply (UPS), the relevant UPS output relay can be opener, mantrap contact, signal light switching.
connected to the pins:
Engineered Solutions - AMC2 - Access Modular Controller 3|5

The maximum number of entrances to be managed by Capacity

one AMC2 is ultimately defined by the door models
used and their requirements regarding readers and Number of analog inputs • AMC2-2WCF: 4
inputs/outputs. • AMC2-4WCF: 8
• AMC2-4R4CF: 8
Voltage equalization: grounding
• Potential differences can be compensated through Number of relay outputs • AMC2-2WCF: 4
the protective grounding with a jumper. • AMC2-4WCF: 8
• A line (shield, equipotential bonding line) with
• AMC2-4R4CF: 8
protective ground can only be connected in one
position.
Connectivity
• For further instructions, see the operating manual.
Host interface • RS485 (2- or 4- wire); opto-
Contacts decoupled
Inputs • Ethernet 10/100BaseT (TCP/IP)
The eight analog inputs can be used as digital or with RJ45
analog contacts. For analog use, resistance values can
be specified that make it possible to carry out a Reader interfaces • AMC2-2WCF: 2 Wiegand
further check for cable breaks and short-circuits. • AMC2-4WCF: 4 Wiegand
Relay outputs • AMC2-4R4CF: 4 RS485; 2-wire,
The relay outputs offer the following functions: opto-coupled, 9,600 Bd
• The outputs can operate with potential free
contacts for external power supply (dry mode). Electrical
• The outputs can operate using the internal voltage
of power supply (wet mode). Power supply 10 to 30 VDC, max. 60 VA
• Only ohm resistive loads can be connected to the Available for external devices: 55 VA
relay.
• Inductive loads must be bypassed through recovery Environmental
diodes. These diodes (1N4004) are enclosed.
Operating temperature (°C) 0 °C – 45 °C
General instructions
• AMC2 and related equipment should be mounted in Operating temperature (°F) 32 ºF - 113 ºF
a "secured area".
• Detailed connection conditions are specified in the IP rating IP30
operating manual.
• After purchase, primary AC power must be done by Mechanical
a licensed electrician.
Color White
Technical specifications

Hardware Dimension (H x W x D) (mm) 232 mm x 90 mm x 63 mm

Components and features • Integrated Microcontroller Dimension (H x W x D) (in) 9.13 in x 3.54 in x 2.48 in

• 512 kB-EPROM/FLASH Material Base: PPO (UL 94 V-0)

• 256 kB-SRAM Upper: Polycarbonate (UL 94 V-0)

• Serial EEPROM Mounting type Rail-mounted

• RTC
Weight (g) 503 g - 540 g
• Pluggable 2 GB Compact Flash
Weight (lb) 1.1 lb - 1.19 lb
• Battery for SRAM and RTC

• Reset button Operation

• Host address can be set via DIP
Protection Tamper switch
switch
Engineered Solutions - AMC2 - Access Modular Controller 4|5

Ordering information API-AMC2-16ION Standalone controller for BIS with

OPC
APC-AMC2-2WCF Door controller WI, 2 readers Standalone controller with inputs and outputs only.
Two Wiegand interfaces for up to 2 card readers, Compatible with BIS in combination with OPC Server
network connection to the host system and Compact only.
Flash memory (2 GB). Host data transfer encrypted. Order number API-AMC2-16ION | F.01U.013.384
F.01U.407.657: CE certification. F.01U.371.285: CE and
APS-PSU-60 Power supply unit
UL certification.
A power supply unit with an integrated battery charging
Order number APC-AMC2-2WCF | F.01U.407.657
device, that supports 12 V/7 Ah, 12 V/14 Ah and 24 V/7
F.01U.371.285
Ah batteries, with selectable 12 VDC or 24 VDC voltage
APC-AMC2-4WCF Door controller Wiegand with CF output.
card Order number APS-PSU-60 | F.01U.282.970
Four Wiegand interfaces for up to 4 card readers,
D126 Battery, 12V 7Ah
network connection to the host system and Compact
A rechargeable sealed lead‑acid power supply used as a
Flash memory (2 GB). Host data transfer encrypted.
secondary power supply or in auxiliary or ancillary
F.01U.407.651: CE certification. F.01U.027.201: CE and
functions.
UL certification.
Order number D126 | 4.998.125.825
Order number APC-AMC2-4WCF | F.01U.407.651
F.01U.027.201 AEC-AMC2-UL01 AMC enclosure with 1 DIN rail
Compliant with UL294 system certification for AMC2.
APC-AMC2-4R4CF Door controller RS485 with CF card
Order number AEC-AMC2-UL01 | F.01U.330.018
Four RS-485 interfaces for up to 8 card readers, network
connection to the host system and Compact Flash AEC-AMC2-UL02 AMC enclosure with 2 DIN rails
memory (2 GB). Host data transfer encrypted. Reader Compliant with UL294 system certification for AMC2.
data transfer encrypted according to reader capabilities. Order number AEC-AMC2-UL02 | F.01U.330.017
F.01U.407.653: CE certification. F.01U.027.206: CE and AEC-PANEL19-UPS Fitting panel, 19", 2 DIN rails
UL certification. Mounting plate with two DIN rails, a battery bracket, and
Order number APC-AMC2-4R4CF | F.01U.407.653 screw sockets for the power supply to mount into 19”
F.01U.027.206 racks.
Order number AEC-PANEL19-UPS | F.01U.066.193
Accessories
AEC-PANEL19-4DR Fitting panel, 19", 4 DIN rails
API-AMC2-4WE Door controller Wiegand extension
Mounting plate with four DIN rails for 19” racks to
The extension module AMC2 4W-EXT is equipped with
connect max. four AMC2 devices.
four Wiegand type reader-interfaces plus eight inputs
Order number AEC-PANEL19-4DR | F.01U.066.194
and eight outputs. Hence with the AMC2 4W-EXT it is
possible to double the number of readers on an AMC2 ACX-RAIL-400 DIN rail 400mm
4W from 4 to 8. F.01U.407.652: CE certification. Mounting rail (400 mm) for mounting the AMC2
F.01U.011.593: CE and UL certification. component (controller and PSU) when the metal housing
Order number API-AMC2-4WE | F.01U.407.652 is not used.
F.01U.011.593 Order number ACX-RAIL-400 | F.01U.510.954
API-AMC2-8IOE Extention board with 8-input 8-output ACX-RAIL-250 DIN rail 250mm
8 input/output extension board, up to three per AMC, Mounting rail (250 mm) for mounting the AMC2
can be combined with the AMC2 16I-EXT and the AMC2 component when the metal housing is not used.
16I-16O-EXT. F.01U.407.654: CE certification. Order number ACX-RAIL-250 | F.01U.510.935
F.01U.027.200: CE and UL certification.
Order number API-AMC2-8IOE | F.01U.407.654 Services
F.01U.027.200 EWE-AMCCTR-IW 12 mths wrty ext. AMC Reader
Controller
API-AMC2-16IOE Extention board with 16-input 16-
12 months warranty extension
output
Order number EWE-AMCCTR-IW | F.01U.364.824
16 input/output extension board, up to three per AMC,
can be combined with the AMC2 16I-EXT and the AMC2
8I-8O-EXT. F.01U.407.655: CE certification.
F.01U.013.385: CE and UL certification.
Order number API-AMC2-16IOE | F.01U.407.655
F.01U.013.385
API-AMC2-16IE Extention board with 16-input
16 input extension board, up to three per AMC, can be
combined with the AMC2 16I-16O-EXT and the AMC2
8I-8O-EXT. F.01U.407.656: CE certification.
F.01U.045.514: CE and UL certification.
Order number API-AMC2-16IE | F.01U.407.656
F.01U.045.514
Engineered Solutions | APS-PSU-60 Power supply unit

APS-PSU-60 Power supply unit

www.boschsecurity.com

u Supports 12 V/7 Ah, 12 V/14 Ah and 24 V/7 Ah

batteries

u Selectable 12 VDC or 24 VDC voltage output

u Selectable 5 A @ 12 VDC or 2.5 A @ 24 VDC current

output

u Overvoltage protection

u Regulates battery charging voltage

The PSU-60 is a power supply unit with an integrated The following applies to the battery mode:
battery charging device. • If the input voltage is less than 85 VAC, the power
supply switches to “Battery operation” mode and the
Functions yellow LED lights up next to BOP.
• The OFF button is only activated in “Battery
operation” mode. Press this button to switch off the
PSU-60.
• Restart is only possible when the alternating current
supply is restored.
• This power supply unit can be switched to 12 V or 24
V mode. To do this, the switch must be configured as
shown below, when there is no voltage input on the
power supply.

The PSU-60 includes the following LED voltage status

indicators: 24V 12V 12V-mode
• If the input voltage (AC) is greater than 85 VAC, the
green LED lights up next to AC and the AC relay is
closed.
• If the output voltage (DC) is greater than 12 V or 24 V
(depending on the mode), the green LED lights up 24V 12V 24V-mode
next to DC and the DC relay is closed.
• If the battery voltage is greater than 11 V or 22 V
(depending on the mode), the green LED lights up
next to BAT and the BAT relay is closed.
2 | APS-PSU-60 Power supply unit

Notice
The power supply must only be installed by
qualified personnel.

Certifications and approvals

The product is classified in accordance with the

following standards:
• EN 55022 Class B
• EN 55024
• IEC / UL / EN 60950 & CSA (product safety)
• CE
• RCM (Australia)
• RoHS 2.0

Please refer to http://www.boschsecurity.com for

further information.

Installation/configuration notes

The PSU-60 can be mounted on rails and installed in

the AMC housing. The PSU-60 dimensions are shown
in the diagrams below:
Ø1 8.6 mm (0.34 in.) C 99.5 mm (3.92 in.)
Ø2 4.5 mm (0.18 in.) D 8.1 mm (0.32 in.)
A 5.5 mm (0.22 in.) E 134.5 mm (5.30 in.)
B 24 mm (0.94 in.)

* Include tolerances (in mm)

0 – 5 mm = ±0.10 30 – 100 mm = ±0.30
5 – 30 mm = ±0.20 100 – 500 mm = ±0.50

The following diagram shows the connections to the

AMC.

1 140 mm (5.51 in.) 3 60 mm (2.36 in.)

2 105 mm (4.13 in.)

Alternatively, it can be screw-mounted directly to the

wall. There are pre-drilled holes for this purpose on
the base of the housing. These holes have the 1 AC power 3 Temperature sensor #
following dimensions:
2 Battery connection 4 Power supply to AMC wiring
connection *
* For cables exceeding 3m, it is recommended to use a
cylindrical Ferrite Core:
– impedance @ 100 MHz = 90 or 140 Ω
– min. inner diameter = 7.0 ± 0.8 mm
– 100 MHz > Freq > 25 MHz
 3 | APS-PSU-60 Power supply unit

Parts included Battery information

Output voltage: 12V mode 10-15V

Quantity Component
24V mode 20-30V
1 Power supply
Output current for charging the 12V mode 700mA *
1 Plug battery: 24V mode 350mA †
1 x 2-pin for mains (primary AC) connection
* according to battery capacity 14Ah
3 x 2-pin
† according to battery capacity 7Ah
1 x 4-pin
Periodic battery checks - approx. every 5 minutes.
1 NTC resistor
Protection from total battery 12V mode 9.5V
1 Accompanying documentation (installation manual) discharge: 24V mode 19V

Technical specifications The power supply switches to normal operation as soon as the AC
incoming voltage has normalized.
Power Supply Output is Class 2 Power Limited.
Temperature equalization is performed by an external NTC resistor.
Output values
Reverse polarity protection.
Output voltage: 12V mode 10-15V
24V mode 20-30V Environment variables

Output current: 12V mode max 5A Working temperature: -20°C to 60°C (-4°F to 140°F)
24V mode max. 2.5A
Working temperature (UL 0°C to 49°C (32°F to 120°F)
Output power: 60 W (constant) installations only):

Over voltage 12V mode 16.5V Storage temperature: -40°C to 85°C (-40°F to 185°F)
protection at: 24V mode 33V
Relative humidity: 5% to 95%
Input values
Ordering information
Input voltage: AC 100-240V~, 50-60Hz
APS-PSU-60 Power supply unit
Input current (AC): Max. 2A, to the specified max. load at A power supply unit with an integrated battery
85 VAC charging device, that supports 12 V/7 Ah, 12 V/14 Ah
Inrush current for 1ms: AC 100-240V 30A and 24 V/7 Ah batteries, with selectable 12 VDC or 24
VDC voltage output.
Input protection in case of a failure, the primary voltage is cut off from Order number APS-PSU-60
the power supply by a fuse.

Represented by:

Europe, Middle East, Africa: Germany: North America: Asia-Pacific:

Bosch Security Systems B.V. Bosch Sicherheitssysteme GmbH Bosch Security Systems, LLC Robert Bosch (SEA) Pte Ltd, Security Systems
P.O. Box 80002 Robert-Bosch-Ring 5 130 Perinton Parkway 11 Bishan Street 21
5600 JB Eindhoven, The Netherlands 85630 Grasbrunn Fairport, New York, 14450, USA Singapore 573943
Phone: + 31 40 2577 284 Germany Phone: +1 800 289 0096 Phone: +65 6571 2808
[email protected] www.boschsecurity.com Fax: +1 585 223 9180 Fax: +65 6571 2699
emea.boschsecurity.com [email protected] [email protected]
www.boschsecurity.us www.boschsecurity.asia

© Bosch Security Systems 2020 | Data subject to change without notice

12144857739 | en, V10, 07. Jul 2020
Engineered Solutions | AEC-AMC2-UL01 AMC enclosure with 1 DIN rail

AEC-AMC2-UL01 AMC enclosure with 1

DIN rail
www.boschsecurity.com

u Easy-to-install steel enclosure

u UL 294 system certified

u 1 DIN rail system for easy mounting and

replacement

u For installation of one AMC2 controllers or one

AMC2 extension board, one power supply unit and
two batteries

This enclosure has been produced in accordance with 401 mm

15,787 in

UL guidelines and is used for securely mounting and 86,5 mm

3,406 in
200,5 mm
7,894 in

housing an AMC2 and a power supply unit. 5 mm

0,197 in

System overview 10 mm
0,394 in

The AMC2 enclosure is designed for indoor wall

mounting. 318 mm

It ensures a secure installation and housing of one 12,52 in

AMC2 or one AMC2 extension board, one power

supply unit and two batteries.
The steel housing includes an LED for power 5 mm
0,197 in

indication, a tamper contact and pre-stamped knock- 10 mm

0,394 in

outs. 352,5 mm
13,878 in

Installation/configuration notes
Parts included
The external dimensions and the securing screw holes
are shown in this diagram: Quantity Component

1 Enclosure with pre-assembled cables

1 Cable set

3 Cable ties for securing the cables

3 Screws and screw anchors for wall mounting

 2 | AEC-AMC2-UL01 AMC enclosure with 1 DIN rail

Quantity Component ADS-AMC2-2WCF Door controller WI, 2 readers

Two Wiegand interfaces for up to 2 card readers,
1 Installation manual
network connection to the host system and Compact
1 Safety instructions Flash memory (2 GB). Host data transfer encrypted.
Order number ADS-AMC2-2WCF
Technical specifications
APC-AMC2-2WCF Door controller WI, 2 readers
Mechanical Two Wiegand interfaces for up to 2 card readers,
network connection to the host system and Compact
Mounting Wall mount Flash memory (2 GB). Host data transfer encrypted.
Order number APC-AMC2-2WCF
Dimensions (H × W × D) 323 mm × 411 mm × 88 mm
(12.7 in. × 16.2 in. × 3.5 in.) API-AMC2-8IOE Extention board with 8-input 8-out-
put
Weight 5.3 kg (11.7 lb.)
8 input/output extension board, up to three per AMC,
Color White can be combined with the AMC2 16I-EXT and the
AMC2 16I-16O-EXT
Electrical Order number API-AMC2-8IOE

Input voltage 100-240 VAC API-AMC2-16IOE Extention board with 16-input 16-
output
Input current 2A 16 input/output extension board, up to three per AMC,
can be combined with the AMC2 16I-EXT and the
Ordering information AMC2 8I-8O-EXT
Order number API-AMC2-16IOE
AEC-AMC2-UL01 AMC enclosure with 1 DIN rail
Compliant with UL294 system certification for AMC2. API-AMC2-16IE Extention board with 16-input
Order number AEC-AMC2-UL01 16 input extension board, up to three per AMC, can be
Accessories combined with the AMC2 16I-16O-EXT and the AMC2
APS-PSU-60 Power supply unit 8I-8O-EXT
A power supply unit with an integrated battery Order number API-AMC2-16IE
charging device, that supports 12 V/7 Ah, 12 V/14 Ah D126 Battery, 12V 7Ah
and 24 V/7 Ah batteries, with selectable 12 VDC or 24 A rechargeable sealed lead‑acid power supply used as
VDC voltage output. a secondary power supply or in auxiliary or ancillary
Order number APS-PSU-60 functions.
APC-AMC2-4WCF Door controller Wiegand with CF Order number D126
card
Four Wiegand interfaces for up to 4 card readers,
network connection to the host system and Compact
Flash memory (2 GB). Host data transfer encrypted.
Order number APC-AMC2-4WCF

APC-AMC2-4R4CF Door controller RS485 with CF

card
Four RS-485 interfaces for up to 8 card readers,
network connection to the host system and Compact
Flash memory (2 GB). Host data transfer encrypted.
Reader data transfer encrypted according to reader
capabilities.
Order number APC-AMC2-4R4CF

Represented by:

Europe, Middle East, Africa: Germany: North America: Asia-Pacific:

Bosch Security Systems B.V. Bosch Sicherheitssysteme GmbH Bosch Security Systems, Inc. Robert Bosch (SEA) Pte Ltd, Security Systems
P.O. Box 80002 Robert-Bosch-Ring 5 130 Perinton Parkway 11 Bishan Street 21
5600 JB Eindhoven, The Netherlands 85630 Grasbrunn Fairport, New York, 14450, USA Singapore 573943
Phone: + 31 40 2577 284 Germany Phone: +1 800 289 0096 Phone: +65 6571 2808
[email protected] www.boschsecurity.com Fax: +1 585 223 9180 Fax: +65 6571 2699
emea.boschsecurity.com [email protected] [email protected]
www.boschsecurity.us www.boschsecurity.asia

© Bosch Security Systems 2019 | Data subject to change without notice

29253675531 | en, V3, 04. Oct 2019
Systems | ARD-ProxPointPlus - Proximity Reader

ARD-ProxPointPlus - Proximity Reader

▶ Compact reader with beeper and multicolored LED
display
▶ Plastic-coated for indoor and outdoor mounting
▶ Current consumption 20 mA/medium, 75 mA peak
▶ 45 cm connection cable (10-wired)

Non-contact access control readers for connecting to an Parts Included

access controller with Wiegand interfaces.
This extremely compact reader is suitable for indoor and Quantity Component
outdoor mounting. It is operated on the door controller 1 Reader body with board
via the Wiegand interface. 1 Mounting material
1 Installation guide

Installation/Configuration Notes
Installation Technical Specifications

Housing
External dimensions (W x H x D) 79.6 x 43 x 16.8 mm
Material Polycarbonate (UL 94)
Color Black
Weight 75 g
Connections
Display Multicolored LED
Interfaces Wiegand 26-bit
Environmental conditions
Operating temperature -30° to 65° C
Humidity 10 to 95% no condensation water
Environment class IP 65
• Four Wiegand interfaces for connecting readers.
• Up to four readers can be installed per entrance. Electrical parameters
Please follow the general mounting instructions for the Power supply 5 to 16 VDC
proximity reader regarding the distance between readers Reading process HID - PROX
and metallic surfaces.

www.boschsecurity.com
 2 | ARD-ProxPointPlus - Proximity Reader

Housing
Operating/modulation frequency 125 kHz
Reading distance 4 cm to 6 cm with ISO card

Ordering Information
ARD-ProxPointPlus - Proximity Reader ARD-PROX-PPL
Small reader with beeper and multicolored
LED display.

Americas: Europe, Middle East, Africa: Asia-Pacific: Represented by

Bosch Security Systems, Inc. Bosch Security Systems B.V. Robert Bosch (SEA) Pte Ltd, Security Systems
130 Perinton Parkway P.O. Box 80002 11 Bishan Street 21
Fairport, New York, 14450, USA 5600 JB Eindhoven, The Netherlands Singapore 573943
Phone: +1 800 289 0096 Phone: + 31 40 2577 284 Phone: +65 6258 5511
Fax: +1 585 223 9180 Fax: +31 40 2577 330 Fax: +65 6571 2698
[email protected] [email protected] [email protected]
www.boschsecurity.us www.boschsecurity.com www.boschsecurity.com

© Bosch Security Systems Inc. 2010 | Data subject to change without notice
T1923269643 | Cur: en-US, V10, 14 Jul 2010
Engineered Solutions | Access Management System V3.0

Access Management System V3.0

www.boschsecurity.com

u Combines high-end access control features,

performance and availability with intuitive
operation.

u Highly scalable: Up to 200,000 users and 10,000

doors.

u Easy to use: Intuitive GUI and built-in map viewer.

u Easy to configure: Pre-packaged licenses, simple

installation and set-up.

u Comprehensive security management: Integrates

with intrusion and video systems.

Access Management System (AMS) is an access Master Access Controller (MAC)

control system for stand-alone application or for The MAC is an additional security layer to increase
integration with other systems, such as the Bosch system availability. It holds its own database to
video management system BVMS. exchange information between AMCs, even if the main
• As a stand-alone system, it features a simple-to-use server or the network is down.
map and alarm viewer for a rapid assessment of all
Access Modular Controller (AMC)
the devices and entrances on the site. The AMC is a robust and reliable field controller to
• As an integrated system, it allows the operator of a
connect to up to 8 doors with readers and door
video management system to perform door-related
strikes. With its large on-board memory the AMC can
tasks like video-based ID verification, to grant and
make autonomous decisions and store hundreds of
deny access, or to disable doors.
thousands of access events, regardless of network
AMS combines the robustness, performance and
interruptions.
features of high-end access control products with a
modern UI that makes it faster to install and configure. Access Management Database
The existing portfolio of Bosch access control devices The SQL server holds all master data (cardholder,
can be easily scanned and integrated. cards, authorizations, schedules, etc.) and also all
Data privacy and IT security is state-of-the-art, in order access events. The latest version provides encryption
to comply with the latest data-protection regulations. to protect personal information from misuse or theft.

System overview Access Management Dialog Manager

The Dialog Manager is the main user interface for
Access Management Server configuring the system, and for collecting and
The server is the main component for processing all maintaining access-related information. In particular,
data. It coordinates the activities of all the hardware its personnel dialogs are used for enrolling new
and software components described below. cardholders, and maintaining their access
authorizations and credentials.
2 | Access Management System V3.0

Access Management Map View Stand-Alone topology

The Map View is a simple-to-use application both to
visualize the overall security situation of the premises, (1) AMS server
and zoom into close detail. It displays access (2) Client workstation for enrollment
violations, tampering and malfunction alarms, and
allows the sending of commands directly from the (3) Client workstation for access control and intrusion monitoring
maps themselves.
(4) Optional MAC servers (one MAC license is always included, on
Access Management BVMS Interface the AMS server)
The seamless integration with BVMS (version 10.1 or
(5) AMCs for parking lot and door control
higher) allows the video verification of cardholder
identities from the BVMS operator client: a person (6) Intrusion panel with detectors and touch-screen keypad
requesting access with a valid card can be manually
verified through camera live stream and the 1 2
cardholder’s photo from the database. Camera events
can trigger door actions. Door events can trigger
camera actions. AMS BVMS

Access Management Intrusion Interface

Management of up to 25 B and G Series intrusion
panels. Shows area states (e.g. armed, ready to arm),
detector states and intrusion events on Map View. 4 5 6 3
Allows the sending of commands (e.g. arm, disarm) to
panels.
Access Management SDK
This SDK facilitates the integration of 3rd party
systems with AMS, for instance an Identity BVMS Integration
Management or Visitor Management system. A (1) AMS server
particular advantage is its ability to re-use 3rd party
integrations initially written for BIS Access Engine. (2) BVMS management server or DIVAR IP all-in-one

Access Importer/Exporter (3) BVMS Client workstation for access and video management
This tool facilitates data import and export from
(4) Optional MAC servers (one MAC license is always included, on
external systems for 1-time data migration, such as
the AMS server)
from Access PE systems, or regular data transfer from
Active Directory via the LDAP protocol. (5) AMCs
Topology diagrams (6) Entrances with cameras
The following diagrams illustrate AMS configurations
without and with BVMS. Functions

1 • Registration of new cardholders:

– Use fully customizable enrollment dialogs to
HR Reception
streamline the process of cardholder enrollment.
– Capture both conventional and biometric
2 3 6 characteristics, including photos and signatures.
– Design and produce physical credentials.
– Take advantage of dialogs for the mass import of
stored personnel data.
• Assigning of access authorizations:
– Collect access authorizations into reusable
profiles, and assign these to predefined or
customized personnel types.
• Door functions:
– Use a comprehensive set of template door
models, including elevators and parking lots, to
4 5 accelerate the configuration phase of your
project.
– Office mode: unlock doors for free access during
office or shop hours.
– Combat theft and security threats by random
screening of cardholders.
3 | Access Management System V3.0

– Verify cardholder identity with biometric checks Installation/configuration notes

at entrances, and with additional video-based ID
verification powered by BVMS. The following tables illustrate hardware and software
– Disarm an intrusion area and grant access with a requirements for running AMS.
single card swipe.
– Use the SimonsVoss SmartIntego technology to Server
enhance your system with card-programmable
Supported • Windows Server 2016 (64 bit,
remote online doors, as commonly used in hotels,
operating systems. Standard, Datacenter)
healthcare, offices and educational
Installations on • Windows 10, version 1809 (LTSC)
establishments.
other operating • Ensure that the latest software
• Reporting:
systems may updates are installed.
– Take advantage of a large number of predefined
succeed, but are • Note: The default database delivered
template reports.
entirely without with this system is SQL Server 2017
• Guard Tours and patrols:
warranty. Express edition with advanced services
– Define up to 200 guard tours, and monitor up to
8 patrols simultaneously. Minimum hardware • Intel i5 processor with at least 4
• Monitor car parks, visitors, muster points: requirements physical cores
– Display customizable summaries of employees • 8 GB RAM (32 GB recommended)
and visitors on site. • 200 GB of free hard disk space (SSD
– Monitor visiting times, including overstayed visits. disks recommended)
– Monitor the number of available parking spaces. • Graphics adapter with
• Divisions: • 256 MB RAM
– Provide unified access control for a facility that is • A resolution of 1280x1024 (Use the
shared by any number of independent parties. graphic resolution recommended for
– Individual operators can be restricted to manage the client if you wish to run the Map
only the persons, devices and entrances of those View client on the AMS server).
divisions assigned to them. • At least 32 k colors
• Alarm Monitor, Command & Control: • 1 Gbit/s Ethernet card
– The Map View supports up to 1000 maps, which • A free USB port or network share for
can be nested to provide both overviews and installation files
close detail.
– Use the Map View to keep control of large Client, including the Map View client
numbers of entrances simultaneously.
– Use the Map View to monitor incoming alarms Supported • Windows 10, version 1809 (LTSC)
and alerts in real time. operating systems. • Ensure that the latest software
AMS does not buffer intrusion alarms that occur Installations on updates are installed.
while the network or the system itself is down. other operating
• BVMS and DIVAR IP Integration: systems may
– Video verification at entrances. succeed, but are
– Camera actions (e.g. start recording, pan/tilt/ entirely without
zoom) triggered by access events (e.g. warranty.
unauthorized door opening).
Minimum hardware • Intel i5 or higher
– Door events (e.g. unlock/lock door) triggered by
requirements • 8 GB RAM (16 GB recommended)
camera events (e.g. Intelligent Video Analytics).
• 20 GB of free hard disk space
– Requires version 10.1 or higher.
• Graphics adapter
• Milestone XProtect Integration:
• 256 MB RAM
– Use AMS to support XProtect with access events
• To use the AMS Dialog manager, a
and alarms for further processing on XProtect
resolution of 1280x1024 is sufficient.
client.
• For AMS Map view, a resolution of
• Intrusion Integration:
1920x1080 (Full HD) is required.
– Supports up to 25 Bosch B Series (Bx512) and G
• At least 32 k colors
Series (Bx512G) control panels for central user
• DirectX® 11
management and command & control.
• 1 Gbit/s Ethernet card
– A full contingent of panels provides up to 12,800
• A free USB port or network share for
intrusion detectors.
installation files
• Mobile Device Integration:
– Supports HID Mobile Access (on MIFARE CSN via
NFC and Wiegand) and STid Mobile ID (on
MIFARE CSN via Wiegand and OSDP, NFC and
BLE).
4 | Access Management System V3.0

MAC server LITE Licensed Maximum

number number
Supported • Windows Server 2016 (64 bit,
operating systems. Standard, Datacenter) SDK available ✔
Installations on • Windows 10, version 1809 (LTSC)
BVMS integration available ✔
other operating • Ensure that the latest software
systems may updates are installed. Intrusion integration Maximum 25 panels B and G Series
succeed, but are
entirely without License bundle PLUS
warranty.
PLUS Licensed Maximum
Minimum hardware • Intel i5 or higher number number
requirements • 8 GB RAM (16 GB recommended)
Number of doors (with 1 or 2 32 512
• 20 GB of free hard disk space
readers):
• Graphics adapter with
• 256 MB RAM Number of cards: 2000 200,000
• A resolution of 1280x1024
• At least 32 k colors Number of divisions: 1 400
• 1 Gbit/s Ethernet card
Number of clients 1 5
The complexity of security systems has increased configurable:
significantly over the last couple of years. At the same
time, you are still relying on your system to mitigate Number of MACs 3 10
security risks. With Bosch Software Assurance, you Number of AMCs Maximum 125 per MAC
can always approach us for help to ensure your system Up to 60 (on the network)
keeps on running. recommended for high performance
You can find the terms and conditions of Bosch
Software Assurance on the Bosch Building Number of authorizations Maximum 1024 per MAC
Technologies website: https:// Number of guard tours 200
www.boschsecurity.com/xc/en/solutions/
management-software/bosch-software-assurance/ SDK available ✔

Technical specifications BVMS integration available ✔

The following tables specify the dimensions of an AMS Intrusion integration Maximum 25 panels B and G Series
access control system from two aspects:
License bundle PRO
• As per the respective license bundle: LITE, PLUS or
PRO. PRO Licensed Maximum
• As a maximum, if the necessary licenses are number number
purchased.
Number of doors (with 1 or 2 32 10,000
License bundle LITE readers):

LITE Licensed Maximum Number of cards: 5000 200,000

number number
Number of divisions: 1 400
Number of doors (with 1 or 2 16 144
readers): Number of clients 1 40
configurable:
Number of cards: 1000 200,000
Number of MACs 5 40
Number of divisions: 1 400
Number of AMCs Maximum 125 per MAC
Number of clients 1 2
Up to 60 (on the network)
configurable:
recommended for high performance
Number of MACs 1 1
Number of authorizations Maximum 1024 per MAC
Number of AMCs Maximum 125 per MAC
Number of guard tours 200
Up to 60 (on the network)
recommended for high performance SDK available ✔

Number of authorizations Maximum 1024 per MAC BVMS integration available ✔

Number of guard tours 200 Intrusion integration Maximum 25 panels B and G Series
5 | Access Management System V3.0

Languages of the user interface AMS-XCRD-100V30 License for 100 ID cards

• AR: Arabic
License for 100 ID cards
• DE: German
Order number AMS-XCRD-100V30
• EN: English
• ES: Spanish AMS-XCRD-1KV30 License for 1,000 ID cards
• FR: French License for 1000 ID cards
• HU: Hungarian Order number AMS-XCRD-1KV30
• NL: Dutch
• PL: Polish AMS-XCRD-10KV30 License for 10,000 ID cards
• PT: Portuguese License for 10,000 ID cards
• RU: Russian Order number AMS-XCRD-10KV30
• TR: Turkish
• ZH-CN: Chinese (simplified) AMS-XCRD-50KV30 License for 50,000 ID cards
• ZH-TW: Chinese (traditional) License for 50,000 ID cards
Order number AMS-XCRD-50KV30
Hardware devices supported
• The Bosch AMC2 family of access controllers AMS-XDRS-32V30 License for 32 doors
See corresponding datasheets in the product catalogs License for 32 doors
at https://www.boschsecurity.com Order number AMS-XDRS-32V30
• Bosch AMC2 extension boards
See corresponding datasheets in the product catalogs AMS-XDRS-128V30 License for 128 doors
at https://www.boschsecurity.com License for 128 doors
• SimonsVoss SmartIntego remote online door Order number AMS-XDRS-128V30
components
• Signotec signature pad AMS-XDRS-512V30 License for 512 doors
License for 512 doors
Ordering information Order number AMS-XDRS-512V30

AMS-BASE-LITE30 Lite license AMS-XOND-25V30 License for 25 remote online doors

Basic license LITE License for 25 remote online doors
Order number AMS-BASE-LITE30 Order number AMS-XOND-25V30

AMS-BASE-PLUS30 Plus license AMS-XPAN-1V30 License for 1 intrusion panel

Basic license PLUS License for 1 intrusion panel
Order number AMS-BASE-PLUS30 Order number AMS-XPAN-1V30

AMS-BASE-PRO30 Pro license AMS-XPAN-10V30 License for 10 intrusion panels

Basic license PRO License for 10 intrusion panels
Order number AMS-BASE-PRO30 Order number AMS-XPAN-10V30

AMS-XDIV-1V30 License for 1 division AMS-FUPG-TOPL30 License from Lite to Plus

License for 1 additional division Upgrade from Lite to Plus
Order number AMS-XDIV-1V30 Order number AMS-FUPG-TOPL30

AMS-XCLI-1V30 License for 1 operator client AMS-FUPG-TOPR30 License from Plus to Pro
License for 1 operator client Upgrade from Plus to Pro
Order number AMS-XCLI-1V30 Order number AMS-FUPG-TOPR30

AMS-XCLI-5V30 License for 5 operator clients TRA-AMS-CE Training AMS - Expert

License for 5 operator clients Local training for AMS Expert
Order number AMS-XCLI-5V30 Order number TRA-AMS-CE

AMS-XMAC-1V30 License for 1 MAC server TRA-AMS-EE Training AMS - Expert

License for 1 MAC server Headquarters training for AMS Expert
Order number AMS-XMAC-1V30 Order number TRA-AMS-EE

AMS-XMAC-5V30 License for 5 MAC servers

License for 5 MAC servers
Order number AMS-XMAC-5V30