Scribd
Upload
949 views

Caterpillar Hardware Catalog

The document is a catalog for Caterpillar hardware including bolts, nuts, washers, screws, and other mechanical fasteners. It provides specifications for different types of bolts including hex head bolts, high strength hex head bolts, 12 point head bolts, hex socket head bolts, forcing bolts, track bolts, cutting edge bolts, and their coatings, dimensions, material properties, and standards they meet.

Uploaded by

esther
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
949 views

Caterpillar Hardware Catalog

The document is a catalog for Caterpillar hardware including bolts, nuts, washers, screws, and other mechanical fasteners. It provides specifications for different types of bolts including hex head bolts, high strength hex head bolts, 12 point head bolts, hex socket head bolts, forcing bolts, track bolts, cutting edge bolts, and their coatings, dimensions, material properties, and standards they meet.

Uploaded by

esther
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Caterpillar Hardware Catalog

Full download: http://manualplace.com/download/caterpillar-hardware-catalog/

Hardware
Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338
Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370
Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378
Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382
Studs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384
Eyebolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385
Rivets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386
Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389
Rod Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 392
Woodruff Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395
Snap Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396
Hose Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398
Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402

This is the cut pages sample. Download all 66 page(s) at: ManualPlace.com
Hardware

Bolts

Hex Head Bolts


● Designed with smooth rolled threads for better clamp load, shear
resistance and resistance to stripping.
● Made of fine grain steel for a more uniform micro-structure,
resulting in improved toughness and fracture resistance.
● Inch Bolts
■ Meet or exceed SAE Grade 8 specifications for tensile strength and

proof load, minimum tensile strength of 150,000 psi.


■ Have 20% higher head height than SAE specifictions for longer

wear life, easier gripping and less slippage.


■ Marked with 6 radial dashes on the bolt head.

● Metric Bolts
■ Meet or exceed ISO Class 10.9 specifications for tensile strength

and proof load, minimum tensile strength of 150,000 psi.


■ Marked with 10.9 on the bolt head.

● Bolt Coatings
■ Phosphate and Oil coating provides better clamp loads and torque

retention.
■ Zinc Dichromate plating provides better long term corrosion

resistance.

High Strength Hex Head Bolts


● Thread design and steel - similar to HEX Head Bolts.
● Inch Bolts
■ Have 20% higher head height than SAE specifications for longer

wear life, easier gripping and less slippage.


■ Exceed SAE Grade 8 specifictions for tensile strength and proof

load, minimum tensile strength of 170,000 psi.


■ Marked with seven radial dashes on the bolt head.

● Metric Bolts
■ Exceed ISO 10.9 specifications for tensile strength and proof load,

minimum tensile strength of 170,000 psi.


■ Marked with 11.9 on the bolt head.

● Coatings - similar to HEX Head Bolts.

0 1 2 3 4 5 6 7 in

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 cm

338
Hardware

Bolts

12 Point Head Bolts


● Designed with smooth rolled threads for better clamp load, shear
resistance, and resistance to stripping.
● Made of fine grain steel for a more uniform micro-structure,
resulting in improved toughness and fracture resistance.
● Exceed SAE Grade 8 specifictions for tensile strength and proof
load, minimum tensile strength of 170,000 psi.
● For use in restricted clearance applications.

Hex Socket Head Screw Bolts


● Designed with smooth rolled threads for better clamp load, shear
resistance, and resistance to stripping.
● Made of fine grain steel for a more uniform micro-structure,
resulting in improved toughness and fracture resistance.
● Exceed SAE Grade 8 specifictions for tensile strength and proof
load, minimum tensile strength of 170,000 psi.
● For use in restricted clearance applications.

Hex Head Forcing Bolts


● Designed with smooth rolled threads for better clamp load, shear
resistance, and strip resistance.
● Made of fine grain steel for a more uniform micro-structure,
resulting in improved toughness and fracture resistance.

0 1 2 3 4 5 6 7 in

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 cm

339
Hardware

Bolts

Track Bolts and Split Master Link Bolts


● High dome Hex head for longer wear life and reuseability.
● Exceed SAE Grade 8 specifications for tensile strength and proof
load, minimum tensile strength 170,000 psi.
● Special induction heat treat process provides Rockwell C37-42
hardness.

High Strength Track Bolts


● Similar high dome Hex head as standard Track Bolts.
● Exceed SAE Grade 8 specifictions for tensile strength and proof
load, minimum tensile strength 180,000 psi.
● Special induction heat treat process provides Rockwell C39 - 43
hardness.

Cutting Edge Bolts


● Dome shaped head for added strength and wear resistance.
● Exceed SAE Grade 8 specifications for tensile strength and proof
load, minimum tensile strength of 150,000 psi.
● Special induction heat treat process provides Rockwell C33 - 39
minimum.

0 1 2 3 4 5 6 7 in

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 cm

340
Hardware

C B A Hex Head Bolts / Inch / Coarse Thread UNC /


Phosphate & Oil Coated

A B C D A B C D
THREAD BOLT HEAD HEAD GRIP THREAD BOLT HEAD HEAD GRIP
SIZE LENGTH HEIGHT WIDTH LENGTH PART SIZE LENGTH HEIGHT WIDTH LENGTH PART
(in - TPI) (in) (in) (in) (in) NUMBER (in - TPI) (in) (in) (in) (in) NUMBER
1/4-20 3/8 0.19 0.44 0.06 0S-1613 5/16-18 1 5/8 0.24 0.50 0.75 1H-5514
1/2 0.19 0.44 0.06 0S-1614 1 3/4 0.24 0.50 0.87 1B-9575
5/8 0.19 0.44 0.13 2A-0762 2 0.24 0.50 1.13 2B-2694
3/4 0.19 0.44 0.13 0S-1615 2 1/4 0.24 0.50 1.37 1D-4538
7/8 0.19 0.44 0.13 4F-7957 2 1/2 0.24 0.50 1.63 1D-4539
1 0.19 0.44 0.13 0S-1616 2 3/4 0.24 0.50 1.87 1D-4540
1 1/8 0.19 0.44 0.37 9F-6580 3 0.24 0.50 2.13 1D-4541
1 1/4 0.19 0.44 0.13 7B-2742 3 1/4 0.24 0.50 2.25 1F-5842
1 3/8 0.19 0.44 0.63 2A-5546 3 1/2 0.24 0.50 2.63 1F-4111
1 1/2 0.19 0.44 0.25 9F-7022 3 3/4 0.24 0.50 2.75 4B-0831
1 5/8 0.19 0.44 0.87 7B-8167 4 0.24 0.50 3.00 4B-3903
1 3/4 0.19 0.44 1.00 1B-2713 4 1/4 0.24 0.50 3.37 8H-8769
2 0.19 0.44 1.13 8B-2377 4 1/2 0.24 0.50 3.63 3H-5932
2 1/4 0.19 0.44 1.37 1D-4533 4 3/4 0.24 0.50 3.87 3H-3243
2 1/2 0.19 0.44 1.75 1B-2714 5 0.24 0.50 4.13 1F-6296
2 3/4 0.19 0.44 2.00 2A-4781 5 1/2 0.24 0.50 4.63 5L-1761
3 0.19 0.44 2.00 4B-9365 5 3/4 0.24 0.50 4.87 8M-1865
3 1/4 0.19 0.44 2.50 8F-8178 6 0.24 0.50 5.13 5P-0059
3 1/2 0.19 0.44 2.75 3B-8695 6 1/2 0.24 0.50 5.37 4F-3508
3 3/4 0.19 0.44 3.00 8F-6302 Nut 5S-0003
4 0.19 0.44 3.25 8S-4710 Washer 9M-1974
4 1/2 0.19 0.44 3.75 8S-4711 3/8-16 1/2 0.29 0.56 0.09 4F-4879
4 3/4 0.19 0.44 4.00 4L-3776 5/8 0.29 0.56 0.09 0T-0102
5 0.19 0.44 4.25 1B-2716 3/4 0.29 0.56 0.13 0S-0509
5 1/2 0.19 0.44 4.50 1B-2717 7/8 0.29 0.56 0.13 0L-1351
6 0.19 0.44 5.25 1B-2718 1 0.29 0.56 0.13 0S-1594
6 1/2 0.19 0.44 5.50 4N-1761 1 1/8 0.29 0.56 0.31 1A-2029
Nut 9S-8750 1 1/4 0.29 0.56 0.25 0S-1588
Washer 5P-0537 1 3/8 0.29 0.56 0.37 3B-1915
5/16-18 1/2 0.24 0.50 0.06 1C-0569 1 1/2 0.29 0.56 0.37 0S-1591
5/8 0.24 0.50 0.13 2H-3755 1 5/8 0.29 0.56 0.87 2A-4639
3/4 0.24 0.50 0.13 0S-1617 1 3/4 0.29 0.56 0.75 0S-1571
7/8 0.24 0.50 0.13 2B-2695 1 7/8 0.29 0.56 1.06 1C-2251
1 0.24 0.50 0.13 0S-1618 2 0.29 0.56 1.00 0S-1590
1 1/8 0.24 0.50 0.25 4B-3388 2 1/4 0.29 0.56 1.25 0L-2070
1 1/4 0.24 0.50 0.37 1B-7182 2 1/2 0.29 0.56 1.50 0L-1143
1 3/8 0.24 0.50 0.50 1B-2790 2 3/4 0.29 0.56 1.75 0T-0573
1 1/2 0.24 0.50 0.09 1A-9579 3 0.29 0.56 2.00 0S-1619

* High strength bolt.

341
Caterpillar Hardware Catalog
Full download: http://manualplace.com/download/caterpillar-hardware-catalog/
Hardware

Hex Head Bolts / Inch / Coarse Thread UNC / Phosphate & Oil Coated

A B C D A B C D
THREAD BOLT HEAD HEAD GRIP THREAD BOLT HEAD HEAD GRIP
SIZE LENGTH HEIGHT WIDTH LENGTH PART SIZE LENGTH HEIGHT WIDTH LENGTH PART
(in - TPI) (in) (in) (in) (in) NUMBER (in - TPI) (in) (in) (in) (in) NUMBER
3/8-16 3 1/4 0.29 0.56 2.25 0L-1352 7/16-14 4 1/4 0.34 0.69 3.13 2J-5907
3 1/2 0.29 0.56 2.50 0T-0065 4 1/2 0.34 0.69 3.25 4B-7220
3 3/4 0.29 0.56 2.50 0S-1608 4 3/4 0.34 0.69 3.63 7H-3472
4 0.29 0.56 3.00 8S-9191 5 0.34 0.69 3.75 5B-5059
4 1/4 0.29 0.56 3.25 0T-0055 5 1/2 0.34 0.69 4.37 8F-4197
4 1/2 0.29 0.56 3.25 1A-5964 6 0.34 0.69 4.87 8F-6419
4 3/4 0.29 0.56 3.75 1A-5183 6 1/2 0.34 0.69 5.13 3L-0742
5 0.29 0.56 4.00 5B-9603 7 0.34 0.69 5.63 7H-7209
5 1/4 0.29 0.56 4.25 5B-2638 7 1/2 0.34 0.69 6.13 2L-7442
5 1/2 0.29 0.56 4.50 5F-4899 8 0.34 0.69 6.62 4L-7925
5 3/4 0.29 0.56 4.75 7F-3425 9 0.34 0.69 7.63 4L-7926
6 0.29 0.56 4.87 1D-4706 11 0.34 0.69 9.63 3L-4317
6 1/4 0.29 0.56 4.75 8F-8544 Nut 3S-1546
6 1/2 0.29 0.56 5.25 4F-0411 Washer 5P-8244
7 0.29 0.56 5.75 9F-8999 1/2-13 1/2 0.39 0.75 0.06 1K-6705
7 1/2 0.29 0.56 6.25 6B-1557 3/4 0.39 0.75 0.13 0S-1620
8 0.29 0.56 6.75 8F-6350 7/8 0.39 0.75 0.28 2H-3855
8 1/2 0.29 0.56 7.25 9F-2773 1 0.39 0.75 0.13 0S-1621
9 0.29 0.56 7.75 5F-6044 1 1/8 0.39 0.75 0.13 6H-1717
9 1/2 0.29 0.56 8.25 4H-3283 1 1/4 0.39 0.75 0.31 0S-1595
11 0.29 0.56 9.75 5P-1415 1 3/8 0.39 0.75 0.44 7B-3235
12 0.29 0.56 11.00 7M-1202 1 1/2 0.39 0.75 0.25 0S-1585
Nut 9S-8752 1 3/4 0.39 0.75 0.44 0S-1587
Washer 5M-2894 2 0.39 0.75 0.75 1A-1460
7/16-14 3/4 0.34 0.69 0.19 5P-0060 2 1/4 0.39 0.75 1.00 9X-8873
7/8 0.34 0.69 0.13 3L-0526 2 1/4 0.39 0.75 1.00 2B-0947*
1 0.34 0.69 0.13 0T-0318 2 1/2 0.39 0.75 1.25 9S-1366
1 1/8 0.34 0.69 0.13 4F-8965 2 3/4 0.39 0.75 1.50 1A-5822
1 1/4 0.34 0.69 0.13 0T-0320 3 0.39 0.75 1.75 9X-8874
1 3/8 0.34 0.69 0.25 3H-5368 3 0.39 0.75 1.75 0L-1329*
1 1/2 0.34 0.69 0.37 0T-0772 3 1/4 0.39 0.75 2.00 0V-0375
1 3/4 0.34 0.69 0.63 0T-0768 3 1/2 0.39 0.75 2.25 9X-8875
2 0.34 0.69 0.87 0T-0319 3 1/2 0.39 0.75 2.25 1D-4566*
2 1/4 0.34 0.69 1.13 1D-4707 3 3/4 0.39 0.75 2.50 1B-2886
2 1/2 0.34 0.69 1.37 1D-4703 4 0.39 0.75 2.75 0S-1573
2 3/4 0.34 0.69 1.63 1D-4556 4 1/4 0.39 0.75 3.00 1D-4569
3 0.34 0.69 1.87 4F-5192 4 1/2 0.39 0.75 3.25 8S-9089
3 1/4 0.34 0.69 2.13 3B-8428 4 3/4 0.39 0.75 3.50 9X-8876
3 1/2 0.34 0.69 2.37 7F-8698 4 3/4 0.39 0.75 3.50 2B-2006*
3 3/4 0.34 0.69 2.63 9F-2491 5 0.39 0.75 3.75 9X-8877
4 0.34 0.69 2.87 4F-7226 5 0.39 0.75 3.75 2H-6488*

* High strength bolt.

342
This is the cut pages sample. Download all 66 page(s) at: ManualPlace.com

You might also like