Scribd
Upload
46 views1 page

AFX00001 Full Pinout

The document provides a pinout diagram for an input/output controller board. It shows the pin connections for inputs I1-I8 that can accept either digital or 0-10V analog signals. It also shows the pin connections for 4 relay outputs that are normally open contacts rated for 10A each. A Modbus RS485 serial interface is available via terminals A, B, and GND. Status LEDs and a programmable button are accessible via GPIO pins on the main microcontroller.

Uploaded by

rf
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views1 page

AFX00001 Full Pinout

The document provides a pinout diagram for an input/output controller board. It shows the pin connections for inputs I1-I8 that can accept either digital or 0-10V analog signals. It also shows the pin connections for 4 relay outputs that are normally open contacts rated for 10A each. A Modbus RS485 serial interface is available via terminals A, B, and GND. Status LEDs and a programmable button are accessible via GPIO pins on the main microcontroller.

Uploaded by

rf
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Input Connectors

1 VIN
12...24 V DC
2 VIN
3 GND
4 GND STM32H7
5 A0 PA0_C
6 A1 PC2_C

1 A2 PF_12
2 A3 PB_0 Input I1...I8
(DGT/0...10V)
3 A4 PF_10
4 A5 PF_8
5 A6 PF_6
6 A7 PF_4

+ + - - I1 I2 I3 I4 I5 I6 I7 I8
Modbus RS485
half duplex
A (-)
STM32H7 There are NO o n bo ard
GND
t erminat io n res is t o rs
Programmable button PE_4 BTN_USER
B (+)

STM32H7
PH_11 LEDR
PH_12 LED_RESET
Reset Button

STM32H7 Status LEDs

TOP VIEW
PH_15 LED_D3
PI_3 LED_D2
PI_1 LED_D1
PI_0 LED_D0
1 2 3 4 LAN

FE Functional Earth

USB ETH
RJ45
USB-C Ethernet RJ45

1 2 3 4
STM32H7 RELAY
Output 10A PI_6 D0
PI_5 D1
The behavior for all
the 4 relays is NO PI_7 D2
(Normally Open) PI_4 D3

Legend: WARNING Ensure the correct polarity


is respected before connecting the
device to the power supply
Power Power Input GPIO Digital External LED
MAXIMUM analogic input
Power Output Analog External RGB LED voltage is 10V
SKU code: AFX00001
Ground Main Part Other MAXIMUM relay rated voltage 250VAC Full Pinout - Page 1 of 1
MAXIMUM current per relay 10A Last update: 13 Apr, 2023

Secondary Part
This work is licensed under
the Creative Commons
Internal Component Attribution-ShareAlike 4.0
International License. To view a
copy of this license, visit http://
creativecommons.org/licenses/
Other Pins (Reset, System by-sa/4.0/ or send a letter to
Creative Commons, PO Box 1866,
Control, Debugging) Mountain View, CA 94042, USA.

You might also like