Scribd
Upload
29 views2 pages

Auto Anticap EN

The document describes an anti-capillary cable that prevents fluids from penetrating copper wires and damaging electronics. It provides potential applications, specifications, characteristics, standards, and test results for the cable. Dimensions and resistance values are given for different cable cross sections.

Uploaded by

vgciasen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
29 views2 pages

Auto Anticap EN

The document describes an anti-capillary cable that prevents fluids from penetrating copper wires and damaging electronics. It provides potential applications, specifications, characteristics, standards, and test results for the cable. Dimensions and resistance values are given for different cable cross sections.

Uploaded by

vgciasen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

RADOX® anticapillary

for automotive applications

Application
The anti-capillary cable prevents fluids (e.g. water or AdBlue) More expensive sealing solutions, such as waterproof connec-
penetrating the copper wire and thus damaging electronics or tors, overmoulding, adhesive bonding or cable separator
sensors. Potential applications include: sleeves are no longer needed. The cable assumes the sealant
function.
• Cores in AdBlue tanks
• Fan motor cables
• Sensor cables
• Cables connected to control units
RADOX® anticapillary
Cross section 0.35 – 6 mm2
Voltage rating 60 / 600 V DC
Temperature range −55 to +150 °C (3000 h)
Min. bending radius 3 × cable dia.

Characteristics and specialities


• Anticapillary
• Silicone free
• High and low temperature resistance
• Ozone and weathering resistance
• Resistant to pressure at high temperature
• Insulation is resistant to motor oils, fuels and hydrolysis
Test setup: Verification of capillary
• Flame retardant
effect with AdBlue in a glass bottle
• High abrasion resistance • Yellow: Standard cables
• Black/red: Anti-capillary cables

Standards
Conductor General
ISO 6722 ISO 6722 Class D, thin-wall
DIN EN 13602, Cu-ETP1-A (CW003A) LV 112

Dimensions as per ISO 6722


Cross section Conductor Core Weight
mm2 construction* diameter max. Resistance at 20 °C wall thickness diameter kg/100 m
n × mm mm max Ω/km min. mm mm nom.
tinned bare
0.35 7 × 0.26 0.8 54.5 52.0 0.2 1.25 ± 0.05 0.4
0.5 19 × 0.19 1.0 38.2 37.1 0.22 1.5 ± 0.1 0.6
0.75 19 × 0.23 1.2 25.4 24.7 0.24 1.8 ± 0.1 0.9
1.0 19 × 0.26 1.35 19.1 18.5 0.24 2.0 ± 0.1 1.1
1.5 19 × 0.32 1.7 13.0 12.7 0.24 2.3 ± 0.1 1.6
2 19 × 0.38 1.86 9.69 9.42 0.28 2.65 ± 0.15 2.2
2.5 19 × 0.42 2.20 7.82 7.60 0.28 2.85 ± 0.15 2.6
4 19 × 0.55 2.75 4.85 4.71 0.32 3.55 ± 0.15 4.2
6 19 × 0.67 3.30 3.23 3.14 0.32 4.15 ± 0.15 6.1
* typical value × max. single wire diameter
2326/4743/01.2015

HUBER+SUHNER AG
Low Frequency Division
Tumbelenstrasse 20
8330 Pfäffikon/Switzerland HUBER+SUHNER is certified according to ISO 9001,
ISO 14001, ISO/TS 16949 and IRIS.
Phone +41 44 952 2211
Fax +41 44 952 2670 Waiver
hubersuhner.com Fact and figures herein are for information only and do not represent any warranty of any kind.

You might also like