Chart Catalogue

User Guide
Version 4.05.066

DATE OF ISSUE: December 2021

Copyright © 2021 Wärtsilä Voyage Limited. All rights reserved.
The information contained herein is proprietary to Wärtsilä Voyage
Limited and shall not be duplicated in whole or in part. The technical
details contained in this manual are accurate at the date of issue
but are subject to change without prior notice.

Wärtsilä Voyage Limited pursues a policy of continuous development.

This may mean that the product delivered has additional enhancements
not yet covered by the latest version of this manual.
The names of actual companies and products mentioned herein
may be the trademarks of their respective owners.
Wärtsilä uses data gathered from equipment and software to improve and
develop its products and services.

Disclaimer: Supplier’s Products and Services related to the operation

and monitoring of vessels (including but not limited to solutions relating to
onboard navigation and remote ship traffic control) are provided only as
an aid to decision making. The safe voyage planning, navigation,
manoeuvring, operation and monitoring of and instructions and advice
given to vessels are dependent on human skill and judgement and are the
responsibility of the relevant appropriately qualified personnel responsible
for such tasks in accordance with all applicable laws, regulations and best
practices. Accordingly, Supplier will not be liable for any accident,
damage or delay caused by or to any vessel owned or operated by
Customer or any other person whether or not the accident or damage is
related to the operation or failure of the Products or Services.

© 2021 WÄRTSILÄ VOYAGE LIMITED 2

Chart Catalogue User Guide

Table of Contents
1. General Description of the Utility ............................................................................................................ 4
2. Main Menu Buttons and Their Purpose ................................................................................................. 5
3. Type Operations ..................................................................................................................................... 6
3.1. Selection of a small set of charts for a certain area (FOLIOS) .................................................... 6
3.1.1. Selection from All Folios catalogue................................................................................. 6
3.1.2. Selection of charts from Folio by Country catalogue ...................................................... 8
3.2. Selection of standard chart sets by areas (Extra Large Regions) ............................................... 9
3.2.1. Selection of a standard chart set from the Chart Panel .................................................. 9
3.2.2. Selection of a standard chart set from the Information Panel ........................................ 9
3.3. Selection of charts one by one (CHART BY CHART) ............................................................... 10
3.3.1. Selection of a standard chart set from the Information Panel ...................................... 10
3.3.2. Selection of charts one by one from the Chart Panel ................................................... 11
3.4. Viewing of the selected charts ................................................................................................... 11
3.4.1. Viewing of the selected charts ...................................................................................... 11
3.4.2. Viewing of the selected charts and Folio numbers on the Chart Panel ........................ 11
3.4.3. Viewing of reference information on the selected charts .............................................. 12

© 2021 WÄRTSILÄ VOYAGE LIMITED 3

 Chart Catalogue User Guide

1. General Description of the Utility

The Chart Catalogue is designed for the preparation of orders for the purchase of TX–97 format charts from Wartsila.
The catalogue window consists of three parts:
■ Information panel containing the chart catalogues;
■ Chart panel with the outlines of selected charts overlaid on the map of the world;
■ Utility's main menu.

Fig. 1

4
Chart Catalogue User Guide

2. Main Menu Buttons and Their Purpose

Table 1.

MAIN MENU BUTTONS PURPOSE OF MAIN MENU BUTTONS

To increase the display scale in the chart panel

To reduce the display scale in the chart panel

To set the scale of displaying the map of the world in the chart panel

To set the chart display scale in the chart panel

To synchronise automatically information and chart panels

To select a chart together with the inserts and plans

To select charts by using the mouse cursor

To cancel the selection of charts using the mouse cursor

To copy the contents of BUCKET folder to the Clipboard

To load the saved chart lists to the BUCKET folder

To save the list of charts stored in the BUCKET folder

To add selected charts to the BUCKET folder

To delete selected charts from the BUCKET folder

To delete all the charts from the BUCKET folder

Fig. 2
© 2021 WÄRTSILÄ VOYAGE LIMITED 5
 Chart Catalogue User Guide

3. Type Operations
1. Selection of a small set of charts for a certain area (FOLIOS).

2. Selection of a standard set of charts for the areas (EXTRA LARGE

REGIONS).
3. Selection of charts one by one (CHART BY CHART).

4. Viewing of the selected charts.

3.1. Selection of a small set of charts for a certain

area (FOLIOS)
■ Open FOLIOS folder in the Information Panel. The catalogue will be divided into two parts: all the sets of
charts (ALL FOLIOS) arranged in the alphabetical order, and sets of charts for countries (FOLIOS BY
COUNTRY).

3.1.1. Selection from All Folios catalogue

3.1.1.1. Selection from the Chart Panel
■ Position the cursor on ALL FOLIOS catalogue and press the left mouse button (the catalogue will be
highlighted in the blue colour);
■ Move the cursor to the Chart Panel on the map of the world. By moving the mouse cursor along the chart
you can view the offered sets of charts (FOLIOS) over the entire world;
■ Select the required area and increase its display scale (Zoom). To do this cut it out of the map of the world
by using the following procedure: position the mouse cursor on the corner of the desired fragment, press the
left mouse button and without releasing this button move the mouse cursor which will be delineating the
area on the map of the world with the movement of the mouse. Having delineated the required area release
the button. You can increase or reduce the size of the area by using Zoom In and Zoom Out buttons
in the Main Menu;
■ Select the required Folio in the area by moving the mouse cursor to different fragments of the map (different
Folios will be appearing);
■ Fix the selected Folio by positioning the mouse cursor on any of the chart frames in the selected Folio and
double clicking the left mouse button. The Information Panel of the window will display the entire set of all
the existing Folios, whilst the selected set of charts will be shown in the grey colour;
■ Place the selected Folio in BUCKET folder by positioning the cursor on this button and pressing the left
mouse button;
■ To select the next folio repeat the procedure (see Fig. 3).

6
Chart Catalogue User Guide

3.1.1.2. Selection from the Information Panel (by number and

description)
■ Position the mouse cursor in the Information Panel on ALL FOLIOS catalogue and double click the left
mouse button: the catalogue will open up into a set of “ . South coast” type
subcatalogues, etc. (see also Fig. 3);
■ Select the required catalogue by positioning the mouse cursor on it and pressing the left mouse button: the
catalogue will be highlighted in the blue colour, whilst the Chart Panel will display charts of the selected
Folio;
■ Fix the selected Folio by positioning the cursor on any chart frame in the selected Folio and double clicking
the left mouse button;
■ Place the selected Folio in BUCKET folder by positioning the cursor on this button and pressing the left
mouse button.

Fig. 3

© 2021 WÄRTSILÄ VOYAGE LIMITED 7

 Chart Catalogue User Guide

3.1.2. Selection of charts from Folio by Country catalogue

3.1.2.1. Selection from the Chart Panel
■ Position the mouse cursor on FOLIOS BY COUNTRY catalogue in the Information Panel and double click

the left mouse button: the catalogue will open up into a set of Australia, France, etc. type
catalogues;
■ Select the required country by positioning the mouse cursor on the name and pressing the left mouse
button: the catalogue will be highlighted in the blue colour, whilst the Chart Panel will display the fragment of
the map of the world showing the selected country;
■ Use the mouse cursor on the window’s Chart Panel to select the required Folio;
■ Fix the selected Folio by positioning the mouse cursor on any chart frame in the selected Folio and double
clicking the left mouse button;
■ Place the selected Folio in BUCKET folder by positioning the cursor on the button and pressing the left
mouse button.

Fig. 4

3.1.2.2. Selection from the Information Panel

■ Position the mouse cursor on the flag or name of the country in the Information Panel and double click the
left button: this catalogue will open up into type sub-catalogues displaying all the
Folios available for the given country;
■ To display the chart frames of the selected Folio position the cursor on this catalogue in the Information
Panel and press the left mouse button;
■ Fix the selected Folio by positioning the cursor on any chart frame in the selected Folio and double clicking
the left mouse button;
■ Place the selected Folio in BUCKET folder by positioning the cursor on this button and pressing the left
mouse button (see Fig. 4).

8
Chart Catalogue User Guide

3.2. Selection of standard chart sets by areas

(Extra Large Regions)
3.2.1. Selection of a standard chart set from the Chart Panel
■ Position the mouse cursor on EXTRA LARGE REGIONS catalogue and press the left button: the catalogue
will be highlighted in the blue colour;
■ Position the mouse cursor on the window’s Chart Panel. Look through 10 Extra large regions chart sets by
moving the mouse cursor along the chart;
■ Select and fix the required area by positioning the mouse cursor on any chart frame in the given area and
double clicking the left mouse button;
■ Place the selected area in the BUCKET folder by positioning the cursor on the button and pressing the
left mouse button.

Fig. 5

3.2.2. Selection of a standard chart set from the

Information Panel
■ Position the mouse cursor on EXTRA LARGE REGIONS catalogue and double click the left mouse button:
the catalogue will open up into 10 type sub-catalogues;
■ Position the mouse cursor on the required catalogue and press the left mouse button: the Chart Panel will
display the selected Extra Large Region;
■ Fix the selected Extra Large Region by moving the mouse cursor in the Chart Panel to the frame of any
chart in the selected area by double clicking the left mouse button;
■ Move the selected area to the BUCKET folder by positioning the mouse cursor on the button and
pressing the left mouse button (see Fig. 5).

© 2021 WÄRTSILÄ VOYAGE LIMITED 9

 Chart Catalogue User Guide

3.3. Selection of charts one by one (CHART BY

CHART)
3.3.1. Selection of a standard chart set from the
Information Panel
■ Position the mouse cursor on CHART BY CHART catalogue and press the left mouse button: the catalogue
will be highlighted in the blue colour, whilst the chart field will display the map of the world with a complete
chart collection;
■ Magnify the display of the required area on the chart field by moving the cursor without releasing the left
mouse button. Having delineated the required area release the left mouse button;
■ Select the required chart. To do this move the mouse cursor to the chart field, position it on the frame of the
required chart and double click the left mouse button: the selected chart turns blue;
■ To select other charts position the mouse cursor on the next required chart. Press <Ctrl> key and without
releasing it click the left mouse button. Repeat the procedure for selecting the required number of charts
(the frames will be highlighted with the blue colour);
■ Place the charts in the BUCKET folder by positioning the cursor on the button and pressing the left
mouse button.
To delete a mistakenly selected chart use the following procedure:
■ Position the cursor on the button and press the left mouse button.
■ Position the mouse cursor on the frame corner of the required chart, delineate the chart to be deleted by
moving the cursor without releasing the left mouse button. The chart frame will turn black.

10
Chart Catalogue User Guide

3.3.2. Selection of charts one by one from the Chart Panel

■ Position the cursor on CHART BY CHART catalogue in the Information Panel and double click the left
mouse button: the Information Panel displays a list of charts and catalogues with numbers and brief
description of the charts’ geographic positions;
■ Position the cursor on the required chart and press the left mouse button: on the Chart Panel the chart’s
frame will turn blue;
■ Select the next chart by positioning the mouse cursor on the required chart and pressing the left mouse
button keeping <Ctrl> key depressed;
■ Place all the selected charts into the BUCKET folder (see Fig. 6);

Fig. 6

3.4. Viewing of the selected charts

3.4.1. Viewing of the selected charts
■ Position the cursor on the catalogue on the Information Panel and press the left mouse button;
■ The map of the world on the Chart Panel shows frames of the selected charts;
■ To magnify the display of the area (Zoom) on the Chart Panel cut out the area by using the cursor with the
left mouse button depressed.

3.4.2. Viewing of the selected charts and Folio numbers

on the Chart Panel
■ Position the cursor on BUCKET catalogue and double click the left mouse button: a list of numbers of the
selected charts or Folios is displayed;
■ Position the cursor on the name and press the left mouse button: the Chart Panel will display the selected
chart frame or a Folio (chart frames will be shown in the blue colour).

© 2021 WÄRTSILÄ VOYAGE LIMITED 11

 Chart Catalogue User Guide

3.4.3. Viewing of reference information on the selected

charts
■ Position the cursor on BUCKET catalogue and double click the left mouse button: a list of selected charts’
numbers will be displayed;
■ Position the cursor on the name and press the right mouse button: a context menu will be displayed;
■ Use the cursor to select Properties parameter in the context menu and press the left mouse button: the
Chart Panel will display an information window in the following form.

12
 Type Operations Viewing of the selected charts

Chart Catalogue
User Guide
Version 4.05.066
Date of issue: December 2021

24/7 Technical support

Phone number: +46 (0)771 460 100
E-mail: [email protected]
www.wartsila.com

© 2021 WÄRTSILÄ VOYAGE LIMITED 13