Appendix C
Appendix C
The tables in this appendix are required for some of the problems in the book. All results are
quoted to four decimal places at equal intervals of Mach number so that linear interpolation can be
easily applied where required. In most cases this will give adequate accuracy, but if necessary
improved precision can be obtained by direct application of the formulae that follow:
Note that in steady, adiabatic flow with no shaft work, T0 is constant. If the flow is also isentro-
pic, p0 and ρ0 are also constant.
Through a steady flow turbomachinery device, the mass flow rate will be conserved such that m_
is constant.
Table C.1 shows results for γ 5 1.4 (applicable to dry air and diatomic gases). Table C.2 shows
results for γ 5 1.333 (typical of gas turbine combustion products).
(Continued)
507
508 Appendix C: Tables for the Compressible Flow of a Perfect Gas
(Continued)
Appendix C: Tables for the Compressible Flow of a Perfect Gas 509
(Continued)
510 Appendix C: Tables for the Compressible Flow of a Perfect Gas
(Continued)
Appendix C: Tables for the Compressible Flow of a Perfect Gas 511
(Continued)
512 Appendix C: Tables for the Compressible Flow of a Perfect Gas
(Continued)
514 Appendix C: Tables for the Compressible Flow of a Perfect Gas
(Continued)
Appendix C: Tables for the Compressible Flow of a Perfect Gas 515
(Continued)
516 Appendix C: Tables for the Compressible Flow of a Perfect Gas
(Continued)
Appendix C: Tables for the Compressible Flow of a Perfect Gas 517