Scribd
Upload
189 views

ImPow E48100 Embedded Power System Data Sheet-20190421

The E48100-I is a 1U embedded AC/DC power system that can configure two 1U 50A rectifier modules to provide a 100A rated current output. It features high efficiency and power density, wide operating temperature range, hot-swappable rectifiers, and intelligent battery management. The system is used in applications such as wireless base stations, transmission networks, and enterprise communication networks.

Uploaded by

ALVIN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
189 views

ImPow E48100 Embedded Power System Data Sheet-20190421

The E48100-I is a 1U embedded AC/DC power system that can configure two 1U 50A rectifier modules to provide a 100A rated current output. It features high efficiency and power density, wide operating temperature range, hot-swappable rectifiers, and intelligent battery management. The system is used in applications such as wireless base stations, transmission networks, and enterprise communication networks.

Uploaded by

ALVIN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Embedded DC Power System

E48100-I
1.Introduction:
E48100 is an AC/DC embedded power system with
Excellent performance such as high power efficiency,
intelligent battery management,remote management,
wide range of AC input voltage, etc. The system can
configure 2 pieces of 1U 50A high rectifier modules,
and provides 100A rated current output.E48100-I can

be embedded in 19-inch rack or cabinet.

2.Features:

 1U rectifier: high density, high efficiency, excellent high


temperature performance(full load @ 50℃、55℃)
 Wide operation temperature range of embedded power from -40℃ to
80℃
 Hot-swappable rectifiers provide easy installation and maintenance
 Standard installation structure design, adapt to various scenarios
 Compact design(only 1U in height), saving space and installation cost
 Excellent rectifier dormancy function helps increase system efficiency
 Intelligent battery management and protection help to prolong battery
lifespan
 Support environmental signal monitoring and remote management
through dry contact, serial interface or Ethernet interface(options)

3.Application Scenarios:
 Wireless base station
 Transmission network
 Communication network of enterprises
4.Specifications:

Type E48100-I
Dimension 440mm(W)×354mm(D)×44mm(H)

Weight ≤8.5kg

Cooling mode Natural cooling


System
Installation mode Installed on 19-inch rack or inside the cabinet

Cabling mode Front inlet and Front outlet

Maintenance mode Front maintenance, support module grade change

Protection level IP20

Input mode 220VAC single phase

Input capacity 40A terminal


AC
Output capacity NA
Distribution
System Input frequency 45~66Hz, rated value: 50Hz/60Hz

SPD 20kA/40kA, 8/20μs

Output voltage -42~-58VDC, rated value: -53.5VDC

Maximum capacity 6000W


DC
System Battery Fuse 1×40A
Distribution
Load Fuse 1×80A; 1×40A;
SPD 10kA/20kA, 8/20μs(Optional)

Input voltage 85VAC～300VAC, rated 220VAC


System
Efficiency R483000H1＞96%Peak, R483000E1＞92%

Rated power 3000W(176~300VAC)

Working temperature R483000H1 -40℃~+85℃(full load @ 55℃), R483000E1 -40℃~+80℃(full load @ 50℃),
Rectifier
Dimension 106mm(W)×286mm(D)×42.5mm(H)
System
Weight ≤1.9kg

Cooling mode Forced cooling

Power factor ≥0.99

THD ≤5%

Signal input 1 Battery temp., 1 ambient temp, 2common DI

Controller Alarm output 4 dry contact

Communication port RS232/485, SNMP

Display mode LCD


Operating temperature -40℃~+80℃

Storage temperature -40℃~+70℃


Environment
Operating humidity 5%~95%(non-condensing)

Altitude 0~2000m

You might also like