Electronics Circuits Equipment

Electronics Circuits Equipment

 Electronics Circuits Equipment

C ONTENTS
KL-100 Linear Circuit Lab (1) - Electric Circuits Lab .....................................1

KL-200 Linear Circuit Lab (2) - Electronic Circuits Lab ................................4

KL-210 Basic Electrical / Electronic Circuit Lab ............................................8

KL-300 Digital Logic Lab ..............................................................................12

KL-310 Advanced Digital Logic Lab . ...........................................................16

ETS-3000 Digital-Analog Training System ......................................................20

ETS-8000A General Digitized Training System .................................................22

ETS-9000 Advanced Digital Training System .................................................24

i de@Lab-200 Intelligent Digitize Emulated Achievement Lab...........................26

Knowledge & Hope

 Electronics Circuits Equipment

KL-100
Linear Circuit Lab (1) - Electric Circuits Lab

The KL-100 Linear Circuit Lab (1) Electric

Circuits Lab is a comprehensive and self-
contained system suitable for tuition and
experimentation with electric circuits.

All the necessary equipment for electric

circuit experiments such as power supply,
function generator, analog and digital meters
are installed on the main unit.

The 11 modules cover a wide variety of

essential topics for electric circuit. It is indeed
a time and cost saver for both students and
engineers interested in training, developing
and testing prototype circuits.

+ Simulation

Features
1. Ideal for electric circuit experiments and design exercises 2. AC Power Supply
2. Integrated trainer with complete curriculum. (1) Voltage range : 9V~0V~9V
3. Complete with power supplies and test systems for easy (2) With output overload protection
and efficient experimentation.
4. Universal breadboard (1680 tie points) for circuit design 3. Function Generator
and prototyping. (1) Output waveform : Sine, square and triangle
5. All modules equipped with an 8-bit DIP switch for circuits (2) Output frequency : 10 Hz~100 KHz, 4 settings,
fault simulations. continuously adjustable
6. Including computer - based training
(3) Accuracy : ±5% of full scale value
KL-29001 (4) Output impedance : 50Ω
(5) Output voltage : ≥18Vpp (open loop)
≥9Vpp (with 50Ω load)

4. 3 1/2 digit Digital Voltmeter / Ammeter

(1) DC voltage range : 2V, 200V
(2) DC voltage accuracy : ±0.3% of reading + 1 digit
Storage cabinet for easily
storing all modules
(3) DC current range : 200µA, 2000mA
Specifications (4) DC current accuracy : ±0.5% of reading + 1 digit
Main Unit(KL-21001)
5. Analog Meters
1. DC Power Supply (1) AC current : 0 ~ 100mA ~ 1A
(1) Fixed DC power supply
(2) AC voltage : 0 ~ 15V
a. Voltage range : ±5V, ±12V
b. With output overload protection (3) DC current : 0 ~ 100mA ~ 1A
(2) Dual DC power supply (4) DC voltage : 0 ~ 20V
a. Voltage range : ±3V~±18V,
continuously adjustable 6. Speaker
b. With output overload protection one 8Ω, 0.25W speaker with driver circuit

1 Electronics Circuits Equipment

KL-100

7. Variable Resistors
(1) 1KΩ, 0.25W variable resistor with 3 terminals (A,B,C) KL-13004
(2) 10KΩ, 0.25W variable resistor with 3 terminals (A,B,C) Ampere’s Rule Module
(3) 100KΩ, 0.25W variable resistor with 3 terminals (A,B,C)
(4) 1MΩ, 0.25W variable resistor with 3 terminals (A,B,C)
8. Breadboard (AC-90001)
1680 tie-point breadboard on top panel can be easily put
into and taken off.
KL-13005
Fleming’s Rule Module
5

6
8 KL-13006
2 Electromagnetic Induction

KL-13007
Electronic Circuit Fundamental Experiments
7
KL-21001 Module

Experiment Modules
1. 11 modules, each module is equipped with an 8-bit DIP
switch for circuits fault simulations. Students can practice
trouble shooting by setting the DIP switch to different positions. KL-13008
2. Detailed solution for fault simulation is included in the Basic Electronic Circuit Experiments (1)

instructor’s manual.
3. All sockets on the modules accept 2mm plugs.
4. Comprehensive experiment manual and instructor’s manual
5. Module dimension: 255 x 165 x 30mm.
KL-13009
Basic Electronic Circuit Experiments (2)
List of Modules

KL-13001
Basic Electricity Experiments Module

KL-13010
Special Electronic Components Experiments
KL-13002 Module
Magnetism Element Introduction Module

KL-13003 KL-13011
Magnetic Field Module Oscillator Experiments and Applications
Module

Electronics Circuits Equipment 2

 KL-100

List of Experiments
1. Experiments for Basic Electricity 4. Experiments for Simple Electronic Circuits
1-1 DC voltage measurement ..................................KL-21001 4-1 Simple amplifier ..................................................KL-13008
1-2 Using an ohmmeter ............................................KL-13001 4-2 Complementary amplifier ....................................KL-13008
4-3 Voltage regulator ..................................................KL-13008
1-3 Resistor characteristics .....................................KL-13001
4-4 Push-pull amplifier ...............................................KL-13009
1-4 DC current measurement ..................................KL-13001
4-5 Wheatstone bridge ...............................................KL-13009
1-5 Ohm’s law ...........................................................KL-13001 4-6 Dimmer circuit ......................................................KL-13008
1-6 Power in DC circuit .............................................KL-13001 4-7 Multistage cascading amplifier ...........................KL-13008
1-7 Series-parallel network and Kirchoff’s law ........KL-13001 4-8 Relay characteristics ...........................................KL-13008
1-8 Superposition, Thevenin’s and Norton’s theorems 4-9 Touch-controlled switch .......................................KL-13008
.............................................................................KL-13001
5. Experiments for Industrial Control Applications
1-9 Maximum power transfer theorem ....................KL-13001
5-1 CDS characteristics .............................................KL-13010
1-10 DC RC circuit and transient phenomena...........KL-13001
5-2 Light-controlled circuit .........................................KL-13010
1-11 AC voltage measurement .................................KL-13001 5-3 Thermistor characteristics ...................................KL-13010
1-12 AC current measurement ..................................KL-13001 5-4 Temperature-controlled circuit ............................KL-13010
1-13 AC RC circuit ......................................................KL-13001 5-5 Sound controlled circuit ......................................KL-13010
1-14 AC RL circuit .......................................................KL-13001 6. Experiments for Oscillator Characteristics and Applications
1-15 AC RLC circuit ....................................................KL-13001 6-1 Blocking oscillator ...............................................KL-13011
1-16 Power in AC circuit .............................................KL-13001 6-2 Electronic birdcall circuit .....................................KL-13011
1-17 Transformer characteristics ...............................KL-13001 6-3 Astable multivibrator ............................................KL-13011
1-18 Series-resonant circuit .......................................KL-13001 6-4 LED flasher circuit ................................................KL-13011
1-19 Parallel-resonant circuit .....................................KL-13001 6-5 LC resonant circuit ...............................................KL-13011
1-20 LC filter ................................................................KL-13001
Accessories(KL-18001)
2. Experiments for Magnetism 1. Experiment manual and instructor's manual
2-1 Magnetic devices ...............................................KL-13002 2. Connection leads and plugs : 1 set
2-2 Magnetic field .....................................................KL-13003 3. Inductors : 0.1H, 0.5H each 1pce
2-3 Drawing magnetic curves .................................KL-13003 4. Magnet : 1 pce
5. Key : 1 pce
2-4 Magnetic field strength ......................................KL-13003
2-5 Lenz’s and Faraday’s laws ................................KL-13003
2-6 Ampere’s rule .....................................................KL-13004
2-7 Fleming’s rule ......................................................KL-13005 Computer - Based Training
2-8 Self Induction .....................................................KL-13006 1. Build-in circuit simulation of experiment modules.
2. Fault simulation is allowed.
2-9 Mutual Induction ................................................KL-13006
3. Users can flexibly compare the simulation analysis result with
2-10 Magnetic flux detection.....................................KL-13006
hardware signal output.
4. Support virtual instrument.
3. Experiments for Basic Electronic Circuits
3-1 Diode characteristics .........................................KL-13007
3-2 Rectifier circuit ....................................................KL-13007
3-3 Filter circuit .........................................................KL-13007
3-4 Zener diode characteristics ...............................KL-13007
3-5 LED characteristics ............................................KL-13007
3-6 Transistor characteristics ...................................KL-13007
3-7 Multimeter functions ...........................................KL-13007
3-8 FET characteristics.............................................KL-13007
3-9 SCR characteristics ...........................................KL-13007
3-10 UJT characteristics .............................................KL-13007

3 Electronics Circuits Equipment 10805

Electronics Circuits Equipment

KL-200
Linear Circuit Lab (2) - Electronic Circuits Lab

The KL-200 Linear Circuit Lab(2) -

Electronic Circuits Lab is a comprehensive
and self-contained system suitable for
anyone engaged in electronic circuit
experiments.
All the necessary equipment for electronic
circuit experiments such as power supply,
function generator, analog and digital
meters are installed on the main unit.
The 17 modules cover a wide range of
essential topics for electronics circuit. It is
a time and cost saver for both students
and engineers interested in developing
and testing prototype circuits.

+ Simulation

Features Specifications
1. Ideal for electronic circuit experiments and designing Main Unit (KL-21001)
exercises. 1. DC Power Supply
2. Integrated experimental circuit and trainer with comprehensive (1) Fixed DC power supply
experiment curriculum. a. Voltage range : ±5V, ±12V
3. Supply complete training device easy and effective for b. With output overload protection
(2) Dual DC power supply
experiments.
a. Voltage range : ±3V~±18V,
4. With universal breadboard for circuit designing and continuously adjustable
prototypes. b. With output overload protection
5. All modules equipped with an 8-bit DIP switch for fault
2. AC power supply
simulations. (1) Voltage range : 9V~0V~9V
6. Individual keeping case for all modules easy carrying and (2) With output overload protection
storage facilities.
3. Function Generator
7. Including computer - based training
(1) Output waveform : Sine, square and triangle
(2) Output frequency : 10 Hz~100 KHz, 4 settings,
continuously adjustable
(3) Accuracy : ±5% of full scale value
(4) Output impedance : 50Ω
(5) Output voltage : ≥18Vpp (open loop)
≥ 9Vpp (with 50Ω load)
4. 3 1/2 digit Digital Voltmeter/Ammeter
(1) DC voltage range : 2V, 200V
(2) DC voltage accuracy : ±0.3% of reading + 1 digit
(3) DC current range : 200µA, 2000mA
(4) DC current accuracy : ±0.5% of reading + 1 digit

Electronics Circuits Equipment 4

 KL-200

5. Analog Meters
(1) AC current : 0 ~ 100mA ~ 1A
KL-23002
(2) AC voltage : 0 ~ 15V Rectifier, Differential & Integrator Circuits
(3) DC current : 0 ~ 100mA ~ 1A
(4) DC voltage : 0 ~ 20V

6. Speaker
one 8Ω, 0.25W speaker with driver circuit
KL-23003
7. Variable Resistors Transistor Amplification Circuits
(1) 1KΩ, 0.25W variable resistor with 3 terminals (A,B,C)
(2) 10KΩ, 0.25W variable resistor with 3 terminals (A,B,C)
(3) 100KΩ, 0.25W variable resistor with 3 terminals (A,B,C)
(4) 1MΩ, 0.25W variable resistor with 3 terminals (A,B,C)
KL-23004
8. Breadboard (AC-90001) Field Effect Transistor (FET) Circuits
1680 tie-point breadboard on top panel can be easily put
into and taken off.
5

KL-23005
Multistage Amplification Circuits
4

6
8
2

KL-23006
3 1 OTL Amplifier Circuit

7
KL-21001 KL-23007
OCL Amplifier & Feedback Circuit

Experiment Modules
1. Each of 17 modules is secured in a solid-body plastic housing
2. Each module is equipped with an 8-bit DIP switch for fault
simulations. Students can practice trouble shooting by set- KL-23008
ting the DIP switch to different positions Oscillator Circuits (1)
3. Detailed solutions for the fault simulation are included in the
instructor's manual
4. All sockets on the modules accept 2 mm plugs
5. Comprehensive experiment manual and instructor's manual
KL-23009
6. Module dimension : 255 x 165 x 30 mm Oscillator Circuits (2)

List of Modules

KL-23001
Diode, Clipper and Clamper Module KL-23010
Voltage Regulator Circuits

5 Electronics Circuits Equipment

KL-200

3. Rectifier Circuits
KL-23011
Voltage Regulator & Amplitude 3-1 Half wave rectifier circuit ..............................KL-23002(C)
Modulation (AM) Circuits 3-2 Full wave rectifier circuit ...............................KL-23002(C)
3-3 Bridge rectifier circuit ....................................KL-23002(C)
3-4 Dual power supply rectifier circuit ................KL-23002(C)
3-5 Voltage magnified rectifier circuit .................KL-23002(B)
KL-23012
4. Differential and Integrator Circuits
Frequency Modulation (FM) &
OP Amplifier Circuits 4-1 RC direct current charge / discharge circuit ...KL-23002(D)
4-2 Differential circuit : Square wave input ...........KL-23002(D)
4-3 Differential circuit : Sine wave input ...............KL-23002(D)
4-4 Integrator circuit : Square wave input ............KL-23002(D)
4-5 Integrator circuit : Sine wave input .................KL-23002(D)
KL-23013
4-6 RL circuit ........................................................KL-23002(D)
OP Amplifier Circuits (1)
5. Transistors
5-1 PNP transistor ..................................................KL-23002(A)
5-2 NPN transistor ..................................................KL-23002(A)

KL-23014 6. Transistor Amplification Circuits

OP Amplifier Circuits (2) 6-1 Common emitter transistor amplification circuit
............................................................................KL-23003(A)
6-2 Common base transistor amplification circuit
............................................................................KL-23003(B)
6-3 Common collector transistor amplification circuit
KL-23015
............................................................................KL-23003(C)
OP Amplifier Circuits (3) 6-4 Switching type transistor circuit .......................KL-23003(C)
6-5 Darlington's circuit ............................................KL-23004(A)

7. Field Effect Transistors (FET)

7-1 Junction type FET (JFET) ................................KL-23004(B)
7-2 Metal-Oxide-Semiconductor FET (MOSFET)
KL-23016
OP Amplifier Circuits (4) ..........................................................................KL-23004(B)

8. FET Amplification Circuits

8-1 JFET common source amplification circuit : Self-bias
............................................................................KL-23004(C)
8-2 JFET common source amplification circuit : Divide-bias
KL-23017 ............................................................................KL-23004(C)
OP Amplifier Circuits (5)
8-3 JFET common drain amplification circuit : Self-bias
............................................................................KL-23004(C)
8-4 JFET common drain amplification circuit : Divide-bias
List of Experiments
............................................................................KL-23004(C)
1. Characteristics of Diodes
8-5 MOSFET amplification circuit : Biased (1) .......KL-23004(D)
1-1 Silicon diode .....................................................KL-23001(A)
8-6 MOSFET amplification circuit : Biased (2) .......KL-23004(D)
1-2 Germanium diode ............................................KL-23001(A)
1-3 Zener diode .....................................................KL-23001(A) 9. Multi - Stage Amplification Circuits
1-4 Light emitting diode .........................................KL-23001(E) 9-1 RC coupled amplification circuit .....................KL-23005(A)
1-5 Optical diode ....................................................KL-23001(E) 9-2 Direct coupled amplification circuit .................KL-23005(A)
9-3 Transformer coupled amplification circuit ......KL-23005(B)
2. Clipping and Clamping Circuits with Diodes
2-1 Clipping circuit (1) ............................................KL-23001(B) 9-4 Push-pull amplification circuit .........................KL-23005(C)
2-2 Clipping circuit (2) ............................................KL-23001(C) 9-5 OTL amplification circuit .................................KL-23006(B)
2-3 Clamping circuit (1) .........................................KL-23001(D) 9-6 OCL amplification circuit .................................KL-23007(A)
2-4 Clamping circuit (2) .........................................KL-23001(D) 9-7 IC amplification circuit .....................................KL-23006(A)

Electronics Circuits Equipment 6

 KL-200

10. Transistor Negative Feedback Circuits 16. Basic Characteristics of OP Amplifier (1) - Negative Feedback
10-1 Serial voltage negative feedback circuit ......KL-23007(B) 16-1 Logarithm amplification circuit ........................KL-23014(A)
10-2 Parallel voltage negative feedback circuit ...KL-23007(C) 16-2 Exponential amplification circuit .....................KL-23014(A)
10-3 Serial current negative feedback circuit ......KL-23007(B) 16-3 Peak value detection circuit ............................KL-23014(A)
10-4 Parallel current negative feedback circuit ...KL-23007(B) 16-4 Precision clipping circuit ..................................KL-23014(A)
11. Transistor Positive Feedback Circuits 16-5 Voltage adjustment circuit ...............................KL-23014(B)
11-1 Low-frequency sine wave oscillating circuit 16-6 Sampling / hold circuit ......................................KL-23014(C)
a. RC phase-shifting oscillating circuit ........KL-23008(A) 16-7 Instrument amplification circuit .......................KL-23015(B)
b. Wien bridge oscillating circuit ..................KL-23008(B)
11-2 High-frequency sine wave oscillating circuit 17. Basic Characteristics of OP Amplifier(2) - Negative Feedback
a. Hartley's oscillating circuit ........................KL-23008(C)
17-1 High pass amplification circuit ........................KL-23015(A)
b. Colpitts oscillating circuit ..........................KL-23009(A)
17-2 Low pass amplification circuit ........................KL-23015(A)
11-3 Crystal oscillating circuit ..............................KL-23009(A)
11-4 Astable oscillating circuit .............................KL-23008(D) 17-3 Band pass amplification circuit .......................KL-23015(A)
11-5 Monostable oscillating circuit .......................KL-23009(B) 17-4 RIAA amplification circuit ................................KL-23016(A)
11-6 Bistable oscillating circuit .............................KL-23009(C) 17-5 Tone controller circuit ......................................KL-23016(B)
11-7 Intermittent oscillating circuit ........................KL-23009(D) 17-6 Single power supply inverse amplification circuit
11-8 Schmitt's oscillating circuit ...........................KL-23010(A) ..........................................................................KL-23016(A)
11-9 Sawtooth oscillating circuit ..........................KL-23010(B)
18. Basic Characteristics of OP Amplifier - Positive Feedback
12. Regulated Voltage / Constant Current Circuits 18-1 Comparator .......................................................KL-23016(C)
12-1 Regulated voltage circuit with Zener diode 18-2 Schmitt trigger ..................................................KL-23016(C)
.........................................................................KL-23010(C) 18-3 Window-type comparator .................................KL-23016(D)
12-2 Regulated voltage circuit with Zener diode / transistor 18-4 Monostable multivibrator ..................................KL-23017(A)
.........................................................................KL-23010(D) 18-5 Astable multivibrator .........................................KL-23017(A)
12-3 Regulated adjustable voltage circuit .............KL-23010(E) 18-6 Sine wave oscillation circuit
12-4 Current-limiting regulated voltage circuit ......KL-23011(A) a. RC oscillator .................................................KL-23017(B)
12-5 Regulated voltage circuit with IC ..................KL-23011(B) b. Wien oscillator ..............................................KL-23017(B)
12-6 Constant current circuit .................................KL-23011(C)

13. Modulation and Demodulation Accessories(KL-28002)

13-1 Amplitude Modulation circuit (AM) ...............KL-23011(D) 1. Experiment manual and instructor's manual
13-2 Frequency Modulation circuit (FM) ...............KL-23012(A) 2. Connection leads and plugs : 1 set
13-3 Amplitude modulation detecting circuit ........KL-23011(E) 3. Key : 1 pce
13-4 Amplitude demodulation circuit ...................KL-23012(B)
14. OP Amplifiers
14-1 Transistor differential amplification circuit .....KL-23012(C) Computer - Based Training
14-2 Characteristics of OP amplifiers 1. Build-in circuit simulation of experiment modules.
a. Input impedance measurement ................KL-23012(D) 2. Fault simulation is allowed.
b. Output impedance measurement .............KL-23012(D) 3. Users can flexibly compare the simulation analysis result with
c. Bandwidth measurement ...........................KL-23012(D) hardware signal output.
d. Slew rate measurement .............................KL-23012(D) 4. Support virtual instrument.
e. Offset voltage measurement (1) ................KL-23012(D)
f . Offset voltage measurement (2) ................KL-23012(D)
15. Basic Characteristics of OP Amplifier
15-1 Inverse amplification ......................................KL-23013(B)
15-2 Non-Inverse amplification ..............................KL-23013(B)
15-3 Voltage-follower circuit ...................................KL-23013(B)
15-4 Difference amplification ..................................KL-23013(B)
15-5 Sum amplification (Adder) .............................KL-23013(B)
15-6 Clipping circuit ...............................................KL-23013(A)
15-7 Constant voltage circuit .................................KL-23013(A)
15-8 Constant current circuit ..................................KL-23013(A)
15-9 Differentiator circuit .........................................KL-23013(A)
15-10 Integrator circuit ..........................................KL-23013(A)

7 Electronics Circuits Equipment 10805

Electronics Circuits Equipment

KL-210
Basic Electrical / Electronic Circuit Lab
KL-210 Basic Electrical / Electronic Circuit
Lab is ideal for electrical, mechanical, automotive,
science, civil & electronics engineering learning.

All the necessary equipment for electric circuit

experiments such as power supply, function
generator, analog and digital meters are installed
on the main unit for the requirement of experiment.

The whole essential topics of electrical circuit

learning are studied by different modules.

+ Simulation

Features 3. Signal Generator

1. Ideal for students to learn the design of electrical, electronics (1) Pulse generator : (TTL level)
and digital logic circuits. a. Frequency range : 1Hz~10KHz / 4 settings,
continuously adjustable
2. To learn efficiently, power supply, function generator and
b. Fan out : 10 TTL load
measurement unit are all included. (2) Pulse switches
3. All supply units are secured with overload protection. a. 2 independent output, TTL level
4. With one main unit, user can choose the needed modules for b. With Q, Q output, pulse width > 5ms
different learning topics. c. Fan out : 10 TTL load
5. Including computer - based training (3) Data switches
a. 8 sets independent control output, TTL level with
◎ KL-210 Basic Electrical / Electronic Circuit Lab is the best
Debounce circuit.
choice for beginners to learn electricity circuit completely.
b. Fan out : 10 TTL load
KL-29001 4. Function Generator
(1) Output waveform : Sine, triangle, square
(2) Output frequency : 10~100KHz /4 settings,
continuously adjustable
(3) Output amplitude : ≥18Vpp (open circuit)
≥ 9Vpp (50 Ω load)
5. Testing And Display
(1) 3 1/2 digital voltmeter / ammeter
Storage cabinet for easily
a. DC voltage range : 2V, 200V
storing all modules b. DC voltage accuracy : ± 0.3% of reading +1 digit
Specifications c. DC current range : 200µA, 2000mA
d. DC current accuracy : ± 0.5% of reading +1digit
Main Unit (KL-22001)
(2) Galvanometer
1. DC Power Supply a. Current range : ±50mA
(1) Fixed DC power supply b. Accuracy : Class 2.5
a. Voltage : ±5V, ±12V (3) LED indicator :
b. With output overload protection a . 10 sets independent LED indicates high / low logic state
(2) Dual DC power supply b. Input impedance : ≥100K Ω
a. Voltage range : ±3V~ ±18V, (4) Digital display
a. 2 sets independent 7-segment LED
continuously adjustable
b. With BCD-7segment decoder/driver and DP Input
b. With output overload protection
c. Input with 8-4-2-1 code
2. AC Power Supply 6. Breadboard (AC-90001)
(1) Voltage range : 9V~0V~9V 1680 tie-point breadboard on top panel can be easily
(2) With output overload protection put into and taken off.

Electronics Circuits Equipment 8

 KL-210

5
KL-25006
OP Amplifier Circuit Module (1)

6 2

KL-25007
4 1 OP Amplifier Circuit Module (2)

3 KL-22001 KL-25008
List of Modules OP Amplifier Circuit Module (3)
(A) Basic Electricity Experiment Modules

KL-24001
Basic Device Module
KL-25009
OP Amplifier Circuit Module (4)

KL-24002
Basic Electricity Experiment Module

KL-25010
OP Amplifier Circuit Module (5)
KL-24003
Sensor Module(1)

(C) Digital Logic Experiment Modules

KL-24004 KL-26001
Sensor Module(2) Combination Logic Circuit Experiment
Module (1)

(B) Electronic Experiment Modules

KL-25001 KL-26002
Diode, Clipper and Clamper Module Combination Logic Circuit Experiment
Module (2)

KL-25002 KL-26003
Rectifier, Differentiator Integrator Combination Logic Circuit Experiment
Circuit Module Module (3)

KL-26004
KL-25003 Combination Logic Circuit Experiment
Transistor Amplifier Circuit Module Module (4)

KL-26005
KL-25004 Combination Logic Circuit Experiment
Multi-Stage Amplifier Circuit Module Module (5)

KL-26006
KL-25005
Sequential Logic Circuit Experiment
FET Circuit Experiment Module
Module (1)

9 Electronics Circuits Equipment

KL-210

3. AC Circuits
KL-26007 3-1 AC RC circuit ..................................................KL-24002(E)
Sequential Logic Circuit Experiment
3-2 AC RL circuit .................................................. KL-24002(F)
Module (2)
3-3 AC RLC circuit ............................................... KL-24002(H)
3-4 Series-resonant circuit.................................... KL-24002( I )
3-5 Parallel-resonant circuit .................................. KL-24002( J )
(D) Motor Experiment (Option) 3-6 Power in AC circuit ......................................... KL-24002(A)
4. Control Circuits
KL-28001 (Option) 4-1 Water level controller ....................................KL-24003
Low Voltage Electrical Control Module 4-2 Metal detector ................................................ KL-24004(B)
(3 Ø 220V is required) 4-3 Light controller .............................................. KL-24004(A)

(B) Electronic Circuit Experiments

1. Diode Characteristics
KL-28003 (Option) 1-1 PN-junction diode characteristics ..............KL-25001(A)
Single-phase Motor Module (1Ø AC 220V) 1-2 Zener diode characteristics.......................KL-25001(A)
1-3 LED characteristics................................... KL-25001(E)
KL-28004 2 pcs Required (Option) 1-4 Photodiode characteristics........................KL-25001(E)
Three-phase Motor Module (3Ø 220V)
2. Rectifiers and Filters
2-1 Half-wave rectifier ..................................... KL-25002(C)
2-2 Full-wave rectifier...................................... KL-25002(C)
KL-28006 (Option) 2-3 Bridge rectifier.......................................... KL-25002(C)
Load Unit Module
2-4 Dual-power rectifier................................... KL-25002(C)
2-5 Voltage doubler......................................... KL-25002(B)
3. Diode Clipping and Clamping Circuits
3-1 Clipping circuits ........................................ KL-25001(B.C)
KL-28010 (Option) 3-2 Clamping circuits...................................... KL-25001(D)
System Transformer(∆→Y) 4. Differentiator and Integrator
4-1 RC circuit ................................................. KL-25002(D)
4-2 Differentiator circuit ...................................KL-25002(D)
Note : 4-3 Integrator circuit ....................................... KL-25002(D)
When any of above optional module is purchased, 4-4 RL circuit ...................................................KL-25002(D)
KL-28010 System Transformer is essential. 5. Transistor Characteristics
5-1 Basic transistor characteristics ................. KL-25002(A)
5-2 Transistor characteristic curves..................... KL-25002(A)
EM-3390-1A (Option) 6. Transistor Amplifiers
Connecting Lead Holder 6-1 Common-emitter amplifier......................... KL-25003(A)
(1) Mobile type with 5-foot tubular steel 6-2 Common-base amplifier ........................... KL-25003(B)
base and five casters 6-3 Common-collector amplifier.......................KL-25003(C)
6-4 Switching circuit ...................................... KL-25003(C)
(2) Height : 1400mm, iron plate suitable
6-5 Darlington amplifier.................................. KL-25005(A)
with 20 connecting leads slots
7. Multistage Amplifiers
7-1 RC-coupled amplifier................................ KL-25004(A)
7-2 Direct-coupled amplifier........................... KL-25004(A)
7-3 Transformer-coupled amplifier .................. KL-25004(C)
List of Experiments 7-4 Dual-end push-pull amplifier..................... KL-25004(B)
(A) Basic Electricity Experiments
8. FET Characteristics
1. Basic Measurements 8-1 JFET characteristics................................. KL-25005(B)
1-1 Resistance measurement................................ KL-24001(A) 8-2 MOSFET characteristics........................... KL-25005(B)
1-2 Potentiometer characteristics ......................... KL-24002(VR)
1-3 DC Voltage measurement............................... KL-22001 9. FET Amplifiers
1-4 DC Current measurement .............................. KL-24002(A) 9-1 JFET CS amplifier ...........................................KL-25005(C)
1-5 Ohm’s law application .................................... KL-24002(A) 9-2 JFET CD amplifier........................................... KL-25005(C)
1-6 AC voltage measurement............................... KL-24002(A) 9-3 MOSFET CS amplifier..................................... KL-25005(D)
1-7 AC current measurement ............................... KL-24002(C) 10. OPA AMP Characteristics
2. DC Circuits 10-1 Differential amplifier in OP AMP ....................KL-25006(A)
2-1 Series-parallel network and kirchhoff's law ..... KL-24002(A.B) 10-2 OP AMP characteristic measurements......... KL-25006(B)
2-2 Wheatstone bridge ......................................... KL-24002(K) 11. Basic OP AMP Circuits
2-3 Superposition, thevenin's and norton's theorems 11-1 Inverting amplifier......................................... KL-25007(B)
........................................................................ KL-24002(C) 11-2 Noninverting amplifier .................................. KL-25007(B)
2-4 Power in DC circuit ........................................ KL-24002(A) 11-3 Voltage follower.............................................KL-25007(B)
2-5 Maximum power transfer theorem ................. KL-24002(A) 11-4 Differential amplifier ..................................... KL-25007(B)
2-6 DC RC circuit and transient phenomena........ KL-24002(D) 11-5 Adder............................................................KL-25007(B)
2-7 DC RL circuit and transient phenomena ........ KL-24002(F) 11-6 Clipping circuit ............................................. KL-25007(A)

Electronics Circuits Equipment 10

 KL-210

11-7 Constant voltage circuit ................................. KL-25007(A) 4-2 Decoder circuits

11-8 Constant current circuit .................................. KL-25007(A) A. Constructing 2-to-4-line decoder with basic gates
11-9 Differentiator .................................................. KL-25007(A) ................................................................... KL-26003(C)
11-10 Integrator........................................................ KL-25007(A) B. Constructing 4-to-10-line decoder with TTL IC
11-11 Instrumentation amplifier ............................... KL-25008(A) ................................................................... KL-26002(C)
C. Constructing BCD-to-7-segment decoder.. KL-26003(B)
12. OP AMP Applications
5. Multiplexers and Demultiplexers
12-1 Active high-pass filter............................... KL-25008(A)
5-1 Multiplexer circuits
12-2 Active low-pass filter ................................ KL-25008(A) A. Constructing 2-to-1-line multiplexer with basic gates
12-3 Active band-pass filter ............................. KL-25008(A) ................................................................... KL-26004(E)
12-4 Tone control circuit ................................... KL-25009(B) B. Using multiplexer to create function........... KL-26004(F)
13. OP AMP Comparators and Oscillators C. Constructing 8-to-1-line multiplexer with TTL IC
13-1 Comparators............................................ KL-25009(C) .................................................................. KL-26004(F)
13-2 Schmitt trigger ......................................... KL-25009(C) 5-2 Demultiplexer circuits
13-3 Window comparator ................................. KL-25009(D) A. Constructing 1-to-2-line demultiplexer with basic logic
13-4 Monostable multivibrator .......................... KL-25010(A) gates ........................................................ KL-26004(E)
13-5 Astable multivibrator ................................ KL-25010(A) B. Constructing 1-to-8-line demultiplexer with CMOS IC
13-6 Sine wave oscillator.................................. KL-25010(B) .................................................................... KL-26004(B)
13-7 Crystal oscillator ...................................... KL-25009(A) 5-3 Analog Multiplexer/demultiplexer circuits ...... KL-26004(C.D)
6. Arithmetic Elements
6-1 Arithmatic Logic Unit (ALU) circuit ............... KL-26005(B)
1. Basic Logic Gates 6-2 Parity generator circuit
1-1 Logic gate circuit A. Parity generator constructed with XOR gates
A. TTL circuit................................................. KL-26001(C) ................................................................... KL-26002(A)
B. CMOS circuit ............................................ KL-26001(D) B. Parity generator IC .................................... KL-26005(C)
1-2 Threshold voltage measurement 7. Sequential Logic Circuits
A. Measuring TTL threshold voltage.............. KL-26001(C) 7-1 Flip-flops
B. Measuring CMOS threshold voltage ......... KL-26001(D) A. Constructing RS flip-flop with basic logic gates
1-3 Voltage/current measurement ................................................................... KL-26006(C)
A. Measuring TTL I/O voltage and current..... KL-26001(C) B. Constructing D flip-flop with RS flip-flop.... KL-26006(C)
B. Measuring CMOS voltage and current ...... KL-26001(D) C. Constructing JK flip-flop with RS flip-flop.. KL-26006(C)
1-4 Characteristics of basic logic gates D. Constructing master-slave JK flip-flop with RS flip-flop
A. Measuring AND gate characteristics ........ KL-26001(C) ................................................................... KL-26006(C)
B. Measuring OR gate characteristics........... KL-26001(C) E. Constructing shift register with D flip-flops
C. Measuring NOT gate characteristics ........ KL-26001(C) ................................................................... KL-26006(A)
D. Measuring NAND gate characteristics ..... KL-26001(C) F . Preset left / right shift register...................... KL-26006(B)
E. Measuring NOR gate characteristics ........ KL-26001(C) G. Constructing noise elimination circuit with RS flip-flops
F. Measuring XOR gate characteristics ........ KL-26001(C) ................................................................... KL-26006(C)
1-5 Interface between logic 7-2 Counters
A. TTL to CMOS interface.............................. KL-26001(C.D) A. Constructing divide-by-8 counter with JK flip-flops
B. CMOS to TTL interface.............................. KL-26001(C.D) .................................................................. KL-26007(C)
B. Constructing synchronous counter with JK flip-flops
2. Combinational Logic Circuits ................................................................... KL-26007(C)
2-1 NOR gate circuit ........................................... KL-26001(C) C. Constructing divide-by-8 counter with 7490
2-2 NAND gate circuit ......................................... KL-26001(B) ................................................................... KL-26007(B)
2-3 XOR gate circuit D. Constructing BCD Counter with 7490........ KL-26007(B)
A. Constructing XOR gate with NAND gates.... KL-26001(B)
8. Sequential Logic Applications
B. Constructing XOR gate with Basic gates..... KL-26001(A)
8-1 Moving LED control.......................................KL-26007(A)
2-4 AOI gate circuits............................................ KL-26001(A)
8-2 Traffic light control......................................... KL-26007(B)
2-5 Comparator circuits
A. Constructing comparator with basic logic (D) Motor Experiments (Option)
gates ........................................................ KL-26001(A) 1. Motor start , stop and overload control... KL-28001, KL-28003, KL-28004
B. Constructing comparator with TTL IC ....... KL-26005(A) 2. Motor forward/reverse control ............... KL-28001, KL-28003, KL-28004
3. Motor sequence control ........................ KL-28001, KL-28004, KL-28006
3. Adders and Subtractors
4. Motor alternatively running control ........ KL-28001, KL-28004, KL-28006
3-1 Half- and Full-Adder Circuits
5. Wye-delta reduced voltage starting of three-phase
A. Constructing half- and full-adders with basic logic gates induction motor ..................................... KL-28001, KL-28004
................................................................... KL-26002(A)
B. Constructing 4-bit full-adder with IC ........... KL-26002(B)
C. Constructing BCD adder ............................ KL-26002(B)
Accessories(KL-29004)
3-2 Half- and Full-Subtractor Circuits 1. Experiment manual and instructor's manual
A. Constructing half-/full-subtractors with basic logic gates 2. Connection leads and plugs : 1 set
.................................................................... KL-26002(A) 3. Key : 1pce
B. Constructing 4-bit full-subtractor with IC ...... KL-26002(B)
4. Encoders and Decoders
Computer - Based Training
4-1 Encoder circuits 1. Build-in circuit simulation of experiment modules.
A. Constructing 4-to-2-line encoder with basic gates 2. Fault simulation is allowed.
.................................................................... KL-26003(A) 3. Users can flexibly compare the simulation analysis result with
B. Constructing 10-to-4-line encoder with TTL IC hardware signal output.
.................................................................... KL-26004(A) 4. Support virtual instrument.

11 Electronics Circuits Equipment 10805

Electronics Circuits Equipment

KL-300
Digital Logic Lab

The KL-300 Digital Logic Lab is a comprehensive

and self-contained system suitable for anyone
engaged in digital logic experiments.

All the necessary equipment for digital

logic experiments such as power supply, signal
generator, switches and displays are installed
on the main unit.

The 13 modules cover a large variety of essential

topics for digital logic. It is a time and cost saver
for both students and engineers interested in
developing and testing circuit prototypes.

+ Simulation

Features Specifications
1. Suitable for combination logic, sequential logic and Main Unit (KL-31001)
microprocessor circuits design and experiments. 1. Dual DC Power Supply
2. Ideal tool for learning the basics of digital logic circuits. (1) Voltage range : +5V/1.5A, -5V/0.3A,
3. Comprehensive power, signal supply and testing devices ±12V/0.3A
for convenient experiments. (2) With output overload protection
4. Experiments are expandible and flexible with universal 2. Adjustable DC Power Supply
breadboard. (1) Voltage range : +1.5V~+15V
5. Capable of processing TTL, CMOS, NMOS, PMOS and (2) Maximum current output : 0.5A
ECL circuits. (3) With output overload protection
6. All supply units are equipped with overload protection
3. Standard Frequency
for safety purpose. (1) Frequency : 1MHz, 60Hz, 1Hz
7. All modules equipped with 8-bit DIP switch for fault
(2) Accuracy : ±0.01% (1MHz)
simulations.
(3) Fan out : 10 TTL load
8. Individual storage cases for all modules to be easy kept
and carried. 4. Clock Signal Generator
(1) Frequency : 1Hz ~1MHz (6 ranges)
9. All signal generators have independent and simultaneous
a. 1Hz ~ 10Hz d. 1KHz ~ 10KHz
TTL and CMOS level output terminal.
b. 10Hz ~ 100Hz e. 10KHz ~ 100KHz
10. Including computer - based training
c. 100Hz ~ 1KHz f . 100KHz ~ 1MHz
(2) Fan out : 10 TTL load

5. Data Switch
(1) 8-bit DIP switch x 2, 16-bit TTL level output
(2) Toggle switch x 4, each with Debounce circuit
(3) Fan out : 10 TTL load

Electronics Circuits Equipment 12

 KL-300

6. Pulser Switch Experiment Modules

(1) 2 sets of independent control output
(2) Each set with Q, Q output, pulse width > 5ms 1. All 13 modules are equipped with an 8-bit DIP switch for
(3) Each set of switch with Debounce circuit fault simulation. Users learn how to solve various.
(4) Fan out : 10 TTL load problems by setting the DIP switch to different positions
2. Solutions for all fault test are listed in the experiment
7. Line Signal Generator
manual for user's reference.
(1) Frequency : 50Hz / 60Hz
(2) Output voltage : 6Vrms 3. 2mm plugs and sockets are used throughout the main unit
(3) With overload protection and all modules.
4. Comprehensive experiment manual and instructor's manual
8. Thumbwheel Switch
5. Module dimension : 255 x 165 x 30 mm.
2-digit, BCD code output and common point input
6. Connection plugs are used on the modules to prevent
9. Logic Indicator accidental damages.
(1) 16 sets of independent LED indicates high and low 7. Individual keeping case for each module.
logic state
(2) Input Impedance : ≥ 100KΩ
List of Modules
10. Digital Displays
(1) 4 sets of independent 7-segment LED display
(2) With BCD, 7-segment decoder / driver and DP input KL-33001
Basic Logic Gates Experiments
(3) Input with 8-4-2-1 code

11. Logic Probe

(1) TTL and CMOS level
(2) 5mm LED displays
(3) "Lo" and "Hi" LED display low / high logic state
KL-33002
respectively
Combinational Logic Circuit Experiments(1)
12. Speaker
One 8Ω, 0.25W speaker with driver circuit

13. Breadboard Modules (AC-90001)

1680 tie-point breadboard on top panel can be easily put
into and taken off. KL-33003
Combinational Logic Circuit Experiments (2)

7
10 KL-33004
Combinational Logic Circuit Experiments (3)
3 12

4 2

KL-33005
Combinational Logic Circuit Experiments (4)

8 13 6 5 11

KL-31001

KL-33006
Combinational Logic Circuit Experiments (5)

13 Electronics Circuits Equipment

KL-300

1-4 Voltage / current measurement

KL-33007
a. TTL I/O voltage / current measurement ...........KL-33001(D)
Clock Generator Circuit Experiments
b. CMOS voltage / current measurement ...........KL-33001(E)
1-5 Basic logic gate transmission delay measurement
a. TTL gate delay time measurement ...............KL-33001(D)
b. CMOS gate delay time measurement ...........KL-33001(E)
1-6 Measurement of basic logic gates characteristics
KL-33008
Sequential Logic Circuit Experiments (1) a. AND gate characteristics measurement .......KL-33001(D)
b. OR gate characteristics measurement .........KL-33001(D)
c. INVERTER gate characteristics measurement
............................................................................KL-33001(D)
d. NAND gate characteristics measurement ....KL-33001(D)
KL-33009 e. NOR gate characteristics measurement .......KL-33001(D)
Sequential Logic Circuit Experiments (2) f. XOR gate characteristics measurement.......KL-33001(D)
1-7 Interface between logic gates
a. TTL to CMOS interface ................................KL-33001(D.E)
b. CMOS to TTL interface ................................KL-33001(D.E)

KL-33010
2. Combinational Logic Circuits Experiments
Memory Circuit Experiments (1) 2-1 NOR gate circuits ............................................KL-33002(A)
2-2 NAND gate circuit ...........................................KL-33002(B)
2-3 XOR gate circuit
a. Constructing XOR gate with NAND gate......KL-33002(B)
b. Constructing XOR gate with basic gate......KL-33002(C)
KL-33011 2-4 AND-OR-INVERT (AOI) gate circuit ...............KL-33002(C)
Memory Circuit Experiments (2)
2-5 Comparator circuits
a. Comparator constructed with basic logic gates
.......................................................................KL-33002(C)
b. Comparator constructed with TTL IC .........KL-33002(D)
KL-33012 2-6 Schmitt gate circuit ...........................................KL-33002(A)
Converter Circuit Experiments (1) 2-7 Open-collector gate circuits
a. High voltage / current circuit .........................KL-33002(E)
b. Constructing an AND gate with open-collector gate
.......................................................................KL-33002(E)
2-8 Tristate gate circuits
KL-33013 a. Truth table measurements ..........................KL-33003(C)
Converter Circuit Experiments (2) b. Constructing an AND gate with tristate gate
.......................................................................KL-33003(C)
c. Bidirectional transmission circuit ................KL-33003(C)
2-9 Half-adder and full-adder circuits
List of Experiments
a. Constructing HA with basic logic gates ......KL-33004(A)
1. Basic Logic Gates Experiments
b. Full adder circuit ...........................................KL-33004(B)
1-1 Introduction to logic gates and switches.....KL-33001(A)
c. High-speed adder carry generator circuit.....KL-33003(A)
1-2 Logic gates circuits
d. BCD code adder circuit ................................KL-33004(B)
a. Diode Logic (DL) circuit ...........................KL-33001(C) 2-10 Half-subtractor and full-subtractor circuit
b. Resistor-Transistor Logic (RTL) circuit .....KL-33001(B) a. Subtractor circuit constructed with basic logic gates
c. Diode-Transistor Logic (DTL) circuit .........KL-33001(B.C) .......................................................................KL-33004(A)
d. Transistor-Transistor Logic (TTL) circuit......KL-33001(D) b. Full adder and inverter circuit .....................KL-33004(B)
e. CMOS logic circuit ....................................KL-33001(E) 2-11 Arithmetic Logic Unit (ALU) circuit ................KL-33003(B)
2-12 Bit parity generator circuit
1-3 Threshold voltage measurement
a. Bit parity generator constructed with XOR gates
a. TTL threshold voltage measurement .......KL-33001(D)
.......................................................................KL-33004(A)
b. CMOS threshold voltage measurement ...KL-33001(E)
b. Bit parity generator IC ..................................KL-33003(D)

Electronics Circuits Equipment 14

 KL-300

2-13 Encoder circuit 4-2 J-K flip-flop circuits

a. Constructing a 4-to-2 encoder with basic gates a. Asynchronous binary up-counter ..............KL-33009(A)
.....................................................................KL-33005(A)
b. Asynchronous decade up-counter ............KL-33010(D)
b. Constructing a 10-to-4 encoder with TTL IC
.....................................................................KL-33006(A) c. Asynchronous divide-by-N up-counter .....KL-33010(C)
2-14 Decoder circuit d. Asynchronous binary down-counter ..........KL-33009(A)
a. Constructing a 2-to-4 decoder with basic gates e. Synchronous binary up-counter ..................KL-33009(A)
....................................................................KL-33005(C)
f. Synchronous binary up/down counter .......KL-33009(A)
b. Constructing a 4-to-10 decoder with TTL IC
....................................................................KL-33004(C) g. Presetable synchronous binary up/down counter
c. BCD to 7-segment decoder ................KL-33005(B) ......................................................................KL-33010(A)
2-15 Multiplexer circuit h. Presetable synchronous decimal up/down counter
a. Constructing a 2-to-1 multiplexer ..............KL-33006(E) ......................................................................KL-33010(B)
b. Using multiplexers to create functions .......KL-33006(F)
c. Constructing a 8-to-1 multiplexer with TTL IC i. Ring counter ................................................KL-33009(A)
.....................................................................KL-33006(F) j. Johnson's counter .......................................KL-33009(A)
2-16 Demultiplexer circuit
5. Memory Circuit Experiments
a. Constructing a 2-output demultiplexer.....KL-33006(E)
b. Constructing a 8-output demultiplexer ....KL-33006(B) 5-1 Constructing Read Only Memory (ROM) with diodes
2-17 Digitally controlled analog multiplexer/demultiplexer circuit ............................................................................KL-33010(F)
a. Analog switch characteristics ................... KL-33006(C.D) 5-2 Constructing Random Access Memory (RAM) with
b. Bidirectional transmission with CMOS IC analog switches
D flip-flop ..........................................................KL-33010(G)
.........................................................................KL-33006(C)
5-3 64-bit RAM circuit ............................................KL-33011(B)
3. Clock Generator Circuit Experiments 5-4 Erasable Programmable Read Only Memory
3-1 Constructing oscillator circuit with basic logic gates
(EPROM) circuit ................................................KL-33010(E)
........................................................................KL-33007(A)
3-2 Constructing oscillator circuit with schmitt gate 5-5 Electronic EPROM (EEPROM) circuit .............KL-33011(A)
.........................................................................KL-33007(B) 5-6 Constructing dynamic scanning counter with single-chip
3-3 Voltage controlled oscillator (VCO) circuit ........KL-33007(C)
microprocessor ................................................KL-33012(A)
3-4 555 IC oscillator circuit
a. 555 oscillator circuit ..................................KL-33007(D)
6. Converter Circuit Experiment
b. VCO circuit ................................................KL-33007(D)
3-5 Monostable multivibrator circuits 6-1 Digital / Analog Converter (DAC) circuit
a. Low-speed monostable multivibrator circuits a. Unipolar DAC circuit ....................................KL-33013(A)
.....................................................................KL-33007(E) b. Bipolar DAC circuit ......................................KL-33013(A)
b. High-speed monostable multivibrator circuits 6-2 Analog / Digital Converter (ADC) circuit
.....................................................................KL-33007(E)
a. 8-bit converter circuit ....................................KL-33012(B)
c. Constructing monostable multivibrator circuits
....................................................................KL-33007(D) b. 3 1/2-digit converter circuit .........................KL-33013(B)
d. Constructing non-retriggerable circuit with TTL-IC
.....................................................................KL-33007(F) Accessories(KL-38002)
e. Constructing retriggerable circuit with TTL-IC 1. Experiment manual and instructor's manual
....................................................................KL-33007(G) 2. Connection leads and plugs : 1 set
f. Constructing a variable duty cycle oscillator circuit
3. Key : 1 pce
with monostable multivibrator ...................KL-33008(A)

4. Sequential Logic Circuit Experiments

4-1 Flip-flop circuits Computer - Based Training
a. Constructing a R-S flip-flop with a basic logic gates 1. Build-in circuit simulation of experiment modules.
.....................................................................KL-33008(D) 2. Fault simulation is allowed.
b. Constructing a D flip-flop with a R-S flip-flop
3. Users can flexibly compare the simulation analysis result with
.....................................................................KL-33008(D)
c. Constructing a J-K flip-flop with a D flip-flop hardware signal output.
.....................................................................KL-33008(D) 4. Support virtual instrument.
d. Constructing a J-K flip-flop with a R-S flip-flop
.....................................................................KL-33008(D)
e. Constructing a shift register with a D flip-flop
.....................................................................KL-33008(C)
f. Preset left / right shift register .................KL-33008(B)
g. Constructing a noise elimination circuit with R-S
flip-flop .................................................KL-33008(D)

15 Electronics Circuits Equipment 10805

Electronics Circuits Equipment

KL-310
Advanced Digital Logic Lab

The KL-310 Advanced Digital Logic

Lab is designed for students and engineers
interested in developing and testing
prototype circuits. The lab includes
combinational logic, sequential logic,
memory, ADC/DAC. experiment circuits
and offers several application circuits
(PWM, timer, motor control..etc.).

All the necessary equipment for

digital logic experiments such as power
supply, clock generator, switches, displays
are built-in on the main unit. The lab has
10 experiment modules and one CPLD
& breadboard experiment module.

Features Specifications
1. The whole trainer is fully designed by FPGA/CPLD logic circuit. 1. DC Power supply
Buffer circuits have enhanced protection for each module (1) Fixed DC power supply :
which is powered by main unit through power socket, avoiding +5V/2A, -5V/0.5A, +12V/2A
wrong input power source during the experiment. (2) With overload protection
2. Cover different levels of logic circuit experiments, ranging
2. Clock generator
from combinational logic, sequential logic as well as the logic
(1) Signal amplitude output : 3.3V
circuit interfacing with microcontroller and practical application
(2) With adjustable output frequency :
circuit for daily use. square wave, 1Hz ~ 1MHz, 6 range
3. Students can implement their own circuit from universal CPLD (3) Frequency display :
& breadboard experiment module, making it possible to prototype 4 digits 7-segment LED
most analog and digital circuits in the system.
3. Logic level switch
4. Include various types of ADC & DAC circuits to learn different
Toggle switches x 8, 3.3V output
interfacing circuits between analog and digital signal.
5. Built-in 8-channel multiplexer in main unit to measure multiple 4. Data level switch
digital signals in real time. 8-bit DIP switch x 2, 3.3V output
6. Multiple operation modes from 4-digit 7-segment display 5. Pulse signal generator
(a) scanning display mode, (b) individual digit display mode, (1) 2 sets of toggle switch with independent control output
(c) frequency counter mode for measurement of internal and (2) Each set with Q, Q output
external clock. (3) Pulse width >5ms, each with Debounce circuit
7. In dividual keep case for all modules for easy storing and 6. Logic level indicator
carrying (1) 16-bit LED with driver and protection circuit
(2) Input Impedance : >100KΩ
Main Unit(KL-32001)
7. 8 Channel logic signal tracer
1. The main unit is equipped with built-in power supply, clock
(1) 8 logic signal input :
generator, switches, logic signal indicators, multi-signal
input impedance : ≥100KΩ , 3.3V input
tracer, and other peripheries as handy tools to interface (2) Fixed DC level shift for each channel
with experiment modules. (3) Input signal attenuation ratio : 1/8
2. Four on-board holders located on the panel surface to firmly (4) Output signal : BNC or 2mm plug
fix experiment modules. (5) Oscilloscope SYNC. select :
3. The main unit provides a 9-pin DC power supply socket for ALT/CHOP and scan-frequency adjustment
module connection. (6) The function can be used only with analog oscilloscope

Electronics Circuits Equipment 16

 KL-310

8. 7-Segment LED display & frequency measurement KL-34003

2 DIP switches select the function : Encoder, Decoder & Multiplexer Logic Circuit Experiment
(1) 00: Scanning display mode KL-34004
a. Common anode for the control of 7-segments a~g Flip-flop & Sequential Logic & Counter Circuit Experiment
b. Scanning cathode for the control of 4-digit S0~S3 KL-34005
(2) 01: Independent display mode Oscillator / Pulser ; Load ; Up / Down Counter Circuit Experiment
a. Input 4 digits of data individually and decode
KL-34006
the data at 7-segment display separately
Memory ; Matrix LED ; DAC / ADC & MCU Interface Circuit
b. Independent binary input and hexadecimal output Experiment
(3) 10: Frequency counter for internal clock
a. Display the frequency of clock generator from KL-34007
Digital & Analog Timer ,Pulse Generator Circuit Experiment
main unit
b. Frequency range : 0.001KHz ~ 999.9KHz KL-34008
(4) 11: Frequency counter for external clock Ramp-compare / SAR / Dual-slope ADC Experiment
a . Display the frequency of clock signal from KL-34009
external unit Keyboard & Display for Stepping Motor Position Control
b. Frequency range : 0.001KHz ~ 999.9KHz KL-34010
9. Rotary encoder Precise Digital Clock Timer
Rotary encoder output : KL-34011
PA, PB and GND signal, 3.3V output Universal CPLD & Breadboard Experiment

10. Standard signal generator

5 sets of frequency : 20MHz, 1MHz, 10KHz, 100Hz, 1Hz

6 1

KL-34001 KL-34002 KL-34003

9 8

7
10
4

5 3 KL-32001 KL-34004 KL-34005 KL-34006

Experiment Module
1. All built-in DC power socket module supply DC power
from the main unit.
2. Each module includes a CPLD chip to implement all digital
circuits shown on module panel.
3. 2mm sockets, bridge plugs, and cables are used
throughout all modules so that students can easily create KL-34007 KL-34008 KL-34009

the circuits and compare different results in short time.

4. With comprehensive experiment manual.

List of Modules
KL-34001
Combinational Logic Circuit Experiment
KL-34002
KL-34010 KL-34011
Arithmetical Logic / Tri-state & Code Converter Experiment

17 Electronics Circuits Equipment

KL-310

List of Experiments (2) Decoder circuit

1. KL-34001 Combinational Logic Circuit Experiment a. Constructing a 2-to-4 decoder with basic gates
(1) NOR gate circuit b. BCD-to-7-segment decoder (KL-34003 block d)
(2) NAND gate circuit (3) Multiplexer circuit
(3) XOR gate circuit a. Constructing a 2-to-1 multiplexer
a. Constructing XOR gate with NAND gate b. Using multiplexers to create functions
b. The combination with basic gates c . Constructing a 8-to-1 multiplexer circuit with TTL IC
(4) Demultiplexer circuit
(4) AND-OR-INVERTER (A-O-I) gate circuit
Constructing a 2-output demultiplexer with basic logic
(5) Comparator circuit
gates
a. Comparator constructed with basic logic gates (5) Digitally controlled analog multiplexer / demultiplexer
b. Comparator constructed with TTL IC circuit
(6) Schmitt gate circuit (6) The switch characteristics of CMOS level conversion
(7) Open-collector gate circuit circuit
a. High voltage / current circuit
b. Constructing an AND gate with open-collector gate 4. KL-34004 Flip-flop & Sequential Logic & Counter Circuit
Experiment
(8) Half-adder and full-adder circuit
(1) Flip-flop circuits
Construct HA with basic logic gates
a. Construct R-S flip-flop with basic logic gates
(9) Half-subtractor and full-subtractor circuit b. Construct D flip-flop with R-S flip-flops
Subtractor circuit constructed with basic logic gates c. Construct noise elimination circuit with R-S flip-flops
(10) Bit parity generator circuit d. Construct J-K flip-flop with D flip-flops
Bit parity generator constructed with XOR gates e. The J-K flip-flop of delay and differential
(11) Constructing a 4-to-10 decoder with TTL IC f . Construct master-slave J-K flip-flops with dual R-S
(1 2 ) The switch characteristics of TTL level conversion circuit flip-flops
g. Construct shift register with D flip-flops
h. Preset left / right shift register
2. KL-34002 Arithmetical Logic / Tri-state & Code
(2) J-K flip-flop counters
Converter Experiment
a. Asynchronous binary up counter
(1) CMOS FET tristate gate circuit
b. Asynchronous binary down counter
a. Truth table measurements c. Asynchronous decade up counter
b. Constructing an AND gate with tristate gate d. Synchronous binary counter
c. Bidirectional transmission circuit e. Synchronous binary up counter
(2) Half-adder and full-adder circuit f . Synchronous binary up / down counter
a. Full-adder circuit with IC g. Johnson counter
b. High-speed adder carry generator circuit h. Ring counter
c. BCD code adder circuit 5. KL-34005 Oscillator / Pulser ; Load ; Up / Down Counter
(3) Half-subtractor and full-subtractor circuit Circuit Experiment
Full-adder and inverter circuit (1) Constructing Random Access Memory (RAM) with D
(4) Arithmetic Logic Unit (ALU) circuit flip-flop
(5) Bit parity generator circuit (2) 64-bit Random Access Memory (RAM) circuit
Bit parity generator IC (3) Erasable Programmable Read Only Memory (EPROM)
(6) Hex to Dec / Dec to Hex digital conversion circuit
a. 8-digit Dec-to-Hex conversion (4) Asynchronous four-bit binary up counter (use of 7493 IC)
b. 8-bit Hex-to-Dec conversion (5) Presetable binary up/down counter
(6) Presetable decimal up/down counter
3. KL-34003 Encoder, Decoder & Multiplexer Logic (7) Construct Non-retriggerable circuit with the specialized
Circuit Experiment
CMOS IC
(1) Encoder circuit
(8) Construct retriggerable circuit with CMOS IC
a. Constructing a 4-to-2 encoder with basic gates
(9) Construct a variable duty cycle oscillator circuit with
b. Constructing a 9-to-4 encoder with TTL IC
dual monostable multivibrators

Electronics Circuits Equipment 18

 KL-310

6. KL-34006 Memory, Matrix LED & DAC/ADC & MCU 11. KL-34011 Universal CPLD & Breadboard Experiment
Interface Circuit Experiment (1) Create block diagram / schematic file in QUARTUS II
(1) Electronic EPROM (EEPROM) circuit (2) 16-bit Hex counter
(2) DAC0800 unipolar conversion circuit experiments (3) 16-bit decimal counter
(3) Bipolar output conversion circuit (4) 16-bit presetable decimal up / down counter
( 4 ) ADC0804 8-bit SAC analog-to-digital converter experiment (5) 16-bit scanning controller for 7-segment display

(5) Constructing dynamic scanning counter with single chip (6) 16-bit up / down counter and its indication by a
7-segment display
microprocessor
(7) Electronic music box
7. KL-34007 Digital & Analog Timer, Pulse Generator Circuit (8) The traffic light with animation and time indication
Experiment
(1) Constructing oscillator circuit with basic logic gates System Requirement
a. Resistor-capacitor multivibrator
1. PC : 1GHz or faster 32-bit (x86) or 64-bit (x64) processor
b. Resistor-capacitor crystal multivibrator
2GB RAM, 5GB more free disk space
(2) Constructing oscillator circuit with schmitt gate
a. Resistor-capacitor oscillator 2. OS : Windows XP / Vista / 7
b. Variable duty cycle resistor-capacitor oscillator
(3) 555 IC oscillator circuit
a. 555 oscillator circuit
Accessories(KL-39001)
b. Voltage controlled oscillator circuit 1. Experiment manual : 1 pce
(4) Monostable multivibrator circuits 2. Connection leads and plugs : 1 set
a. Low-speed monostable multivibrator circuits 3. Software : QUARTUS II Web Edition
b. Monostable ON/OFF delay circuit for KL-34011 use
c. Monostable ON/OFF timer circuit 4. USB-Blaster : for KL-34011 use
d. Construct monostable multivibrator circuit with 555 IC
(5) Numerically-Controlled Oscillator (NCO) signal generator
(6) Precise-frequency function generator
(7) Variable-duty-cycle NCO signal generator
(8) Variable-ON/OFF delay and difference control experiments
(9) Precise 15-bit symmetric / asymmetric PWM generator

8. KL-34008 Ramp-compare / SAR / Dual-slope ADC Experiment

(1) Simple R-2R unipolar output D/A converter experiments
(2) 8-bit digital-ramp A/D converter experiment
(3) 8-bit successive-approximation A/D converter experiment
(4) 8-bit dual-slope A/D converter experiment

9. KL-34009 Keyboard & Display for Stepping Motor Position

Control
(1) Stepper motor position / speed control experiment

10. KL-34010 Precise Digital Clock Timer

(1) Clock experiment
(2) Timer experiment

19 Electronics Circuits Equipment 10805

Electronics Circuits Equipment

ETS-3000
Digital-Analog Training System
Feature
1. Suitable for basic electric circuits, linear circuits, combinational logic,
sequential logic, microprocessor circuits, and FPGA.
2. User-friendly comprehensive power supply, function generator/
counter, digital meter, analog meter and testing devices.
3. Universal breadboard(1440 tie points) for circuit design, faya-Nugget
breakout boards NGT-series and prototyping.
4. Tie points fitting solid leads AWG#22~30 (0.3~0.8mm).
5. USB Interface for optional fayaduino Nano board, FPGA, MCU.
6. Peripheral hardware:
LED, Joy Stick switch, Rotate switch, Potentiometer, Pulser switch,
Rotary encoder, Data switches, Speaker, Power supply, Digital displays,
Function generator / counter, DCV/DCA meter, Analog meter, etc,
7. Options: FPGA board (with USB Blaster), MCU board, faya-Nugget
Combo Pack.

Specifications
1. Function Generator / Counter 4. Logic Indicators
(1) Universal counter 8 sets of independent LED indicates high / low logic state
a. Frequency range :
5. Joy Stick Switch
1Hz~99.99999MHz, 10Hz~100.00000MHz
(1) X / Y- axis potentiometer : 5KΩ
b. Period range TH & TL :
0.01μs~999999.99μs, 1μs~99999999μs (2) Switch type : momentary

c. Input signal : 6. Potentiometer

TTL or CMOS level or any level (Vmin≧+4.2Vp±10%) (1) Variable resistor : 1KΩ(B) ,4-pin output
d. Display : 8-digit 7-segment LED display (2) Variable resistor :100KΩ(B) ,4-pin output
e. Mode switch : FG/FC
7. Rotate Switch
(2) Function generator
6 positions rotary switch, 2 set output
a. Output waveform :
sine, square, triangle, TTL (square only) 8. Pulser Switch
b. Frequency range : 1mHz~2MHz (1) Independent output, TTL level
c. Amplitude range : 100mVpp~18Vpp (open circuit) (2) With A, Ā output, pulse width > 5ms
d. DC offset : -10V~+10V
9. Rotary Encoder
e. TTL mode output level : +5V±10%
(1) PA, PB signal output
2. Digital DCV/DCA Meter
(1) DC voltage range : 2V, 40V (2) TTL level
(2) DC voltage accuracy : ±3% of reading + 1 digit 10. Data Switches
(3) DC current range : 200μA, 2A 8 sets independently control output high / low, TTL level
(4) DC current accuracy : ±3% of reading + 1 digit
11. Speaker
(5) Project fuse : 2A
8Ω / 0.5W to be used for load
3. Analog V/A Meter
(1).Voltmeter : 12. Adapter

0~30VDC full scale, class 2.5, impedance=320KΩ For point tip / BNC socket exchange adapters, 2 sets
(2) Ampere meter : 0~100mA & 0~1A

Electronics Circuits Equipment 20

 ETS-3000

13. Adjustable Power Supply Options

1. FPGA Board (ETS-33051)
(1) Positive output voltage :
0~+15V±10%, continuously adjustable
(2) Negative output voltage :
0~-15V±10%, continuously adjustable
USB Blaster
(3) Maximum output current: 500mA
(1) Chip : Altera EPM 570T100C5
14. Fixed Power Supply
(2) Operating voltage : +5V
(1) Fixed DC output : +5V±10%, 1A (3) Digital input pins : 20
(2) Fixed DC output : +3.3V±10%, 1A (4) Digital output pins : 16
(5) Clock speed : 20MHz
(3) Fixed DC output : -5V±10%, 300mA (6) Interface : JTAG
15. Digital Displays (7) With USB blaster
(8) User guide / sample code
(1) 4 sets of independent 7-segment LED display
2. MCU Board (ETS-33052)
(2) With BCD, 7-segment decoder/driver and DP input
(3) Input with 8-4-2-1 code
16. Breadboards
(1) Fitted on brick plate by brick posts
USB ISP
(2) LA-60 x 4pcs: each 360 tie points, total 1440 tie points
(1) Chip : Atmel AT89S52
(3) Fitting solid leads AWG #22~30 (0.3~0.8mm)
(2) Operating voltage : +5V
(3) Digital I/O pins : 32
(4) Clock speed : 8MHz
(5) Interface : USB ISP
(6) User guide / sample code

3. faya-Nugget Combo Pack (NGT-601)

Running Arduino experiments with fayalab
Electronic Blocks

17. USB Jack

Type A on front panel and Type B at the rear
18. Power Switch and Fuse Main Controller :
fayaduino NANO
Modules :
Accessories 1. Touch Slider 7. IR Distance Sensor
1. Power Cord 2. RGB LED 8. DC Motor
3. Color Sticker 9. Step Motor
2. USB Cable (Type A to Type B)
4. Light Sensor 10. IR Receiver
3. User Manual 5. Humidity & Temperature Sensor 11. IR Transmitter
6. IR Pulse Sensor 12. Basic Logic Gates

Accessories :
General Characteristic 1. Brick Post Pack
1. AC Power Input : AC 110V/220V, 50Hz/60Hz, ±10%, 1A 2. Brick Cap Pack
2. Weight : 4.5Kg 3. Mini USB Cable
3. Operating Temperature : ambient temperature 4. Power Wire Pack
5. Signal Wire Pack
6. Tutorial CD

21 Electronics Circuits Equipment 10805

Electronics Circuits Equipment

ETS-8000A
General Digitized Training System
The ETS-8000A is a basic digital logic circuit
training system. It includes combinational logic
and sequential logic experiment circuit. The
course content of experiment has hardware
emulation and software simulation.

All necessary equipment for digital logic

experiment such as power supply, signal generator,
indicator, measurement are installed on the main
unit.

*Notebook is excluded.

Features b. Data switch

1. Suitable for combinational logic, sequential logic • 8 sets of independent output
experiments and designs • Output level : TTL
2. Ideal tool for learning the basics of digital logic circuits • Fan out : 10 TTL load
3. Comprehensive power, signal supply and measurement c. Pulse switch
devices for making experiments easily
• 2 sets of independent control output
4. Expandable and flexible experiments with universal
breadboard • Each set with Q,Q output, pulse width > 5 ms
5. All supply units are equipped with overload protection • Output Level : TTL
for safety • Each set of switch with Debounce circuit
6. Computer interaction includes software simulation & • Fan out : 10 TTL load
hardware emulation d. Potentiometer
• 1 KΩ, 0.25W, variable resistor with 3 terminals (1,2,3)
Specification
with overload protection
Main Unit (ETS-81001A) • 100 KΩ, 0.25W, variable resistor with 3 terminals (1,2,3)
1. Power Supply Units with overload protection
a. Fixed DC power supply
• Voltage range : +5 V, -5 V 3. Measurement Units
• Maximum current output : 0.3 A a. 3 1/2-digit digital volt / amp meter
• With overload protection • DC voltage range : 2 V, 20V
b. Dual adjustable DC power supply • DC voltage accuracy : ±0.3% of reading +1-digit
• Voltage range : ±3 V ~ ±18 V, • DC current range : 2 mA, 2 A
continuously adjustable • DC current accuracy : ±0.5% of reading +1-digit
• Maximum current output : 1 A
• With overload protection 4. Indicator Units
a. Logic indicators
2. Signal Generator Units • Logic level : TTL
a. Function generator • Display : Red LED for logic high,
• Output waveform : sine, triangle, square, TTL level green LED for logic low ;
• Output frequency : 1~100 KHz; 5 settings, open status is none
continuously adjustable • 8 sets of independent input terminal
• Output impedance : 50Ω b. Digital display
• Output amplitude : ≥ 18 Vpp (open loop); • Logic level : TTL
≥ 9 Vpp (with 50Ω load) • 2 sets of independent 7-segment LED display
• Digital display : 4 sets of 7-segment LED display • With BCD, 7-segment decode / driver input terminal
With Hz, KHz, gate, OVFL LED c. 8x8 LED dot matrix
With frequency counter • Logic level : TTL
• Minimum input voltage : 300m Vpp • With row input terminal : R0~R7
• Counter range : DC ~ 100 KHz • With column input terminal: C0~C7

Electronics Circuits Equipment 22

 ETS-8000A

5. USB Port
6. System requirement
1. PC : 1GHz or faster 32-bit (x86) or 64-bit (x64) processor USB

128MB RAM, 100MB more free disk space

ETS-83001 ETS-83003
2. OS : Windows XP / Vista / 7

ETS-83002 ETS-83004

List of Experiments
a. Software simulation • Basic logic gates experiments
• Simulate all the active status of digital logic circuits on (a) OR gate (b) NOT gate
the platform of ETS-8000A (c) OR + NOT gate (d) NOR gate
• With simulation software of breadboard (e) NAND gate ( f ) 4-inputs NAND gate
• Simulate all digital experiments of user manual (g) AND-NOR (h) Staircase lamp
• Hint for experiment procedure • Assembled logic circuits experiments
• Automatically judge the line connection is true or false (a) X+0=X, X+1=1 (b) X．0=0, X．1=X
by computer (c) X+X=X, X+X'=1 (d) X．X=X, X．X'=0
• Record experiment result (e) (X．Y)'=X'+Y' ( f ) (X+Y)'=X’．Y'
b. Hardware emulation (g) 2-bits comparator (h) Voting circuit
• Receive signal status of ETS-8000A platform through USB ( i ) Karnaugh map application
• Display the entity operation of ETS-8000A platform in • Adder / subtractor experiments
screen (a) Half adder (b) Full adder
• Display hint for how to connect & proceed from screen (c) Half subtractor (d) Full subtractor
• Automatically judge the experiment result by software (e) 4-bits adder ( f ) 4-bits subtractor
• Record experiment result (g) BCD code adder
• Decoder / encoder experiments
3a 5 4a
(a) 8 to 3 encoder
(b) 3 to 8 decoder
• Multiplexer experiments
(a) Multiplexer
4b (b) Logic unit
2a • Basic Flip-Flop experiments
4c
6 (a) Constructing a R-S Flip-Flop with NAND gates
(b) Constructing a R-S Flip-Flop with NOR gates
1a (c) J-K Flip-Flop
1b (d) T Flip-Flop
(e) D Flip-Flop
2d 2c 2b ETS-81001A • Application of Flip-Flop experiments
(a) Constructing a D Flip-Flop with a J-K Flip-Flop
Experiment Modules (b) Constructing a T Flip-Flop with a J-K Flip-Flop
1. Each module is equipped with an 8-bit DIP switch for fault (c) Mod-8 of ripple counter
simulations. Students can practice trouble shooting by • Counter experiments
setting the DIP switch to different positions. (a) Mod-8 counter
(b) Mod-4 arbitrarily sequence
2. All terminals on the modules accept 2 mm plugs.
• Application of digital logic
3. Comprehensive experiment manual (a) 0~9 electric roulette
4. Module dimension : 255 x 165 x 30 mm (b) Traffic sign control
5. Individual storage case for each module
Accessories
List of Modules 1. Experiment manual
ETS-83001 Digital Logic Circuit Experiment Module (1) 2. Connection leads and plugs : 1 set
ETS-83002 Digital Logic Circuit Experiment Module (2) 3. CD : Software for data acquisition
ETS-83003 Digital Logic Circuit Experiment Module (3) 4. USB cable : 1 pce
ETS-83004 Digital Logic Circuit Experiment Module (4) 5. Key : 1 pce

23 Electronics Circuits Equipment 10805

 Electronics Circuits Equipment

ETS-9000
Advanced Digital Training System
Feature
1. Suitable for combinational logic, sequential logic, microprocessor
circuits, FPGA, etc.
2. User-friendly comprehensive power supply, function generator/
counter and testing devices.
3. Universal breadboard(1440 tie-points) for circuit design, faya-Nugget
breakout boards NGT-series and prototyping.
4. Tie points fitting solid leads AWG#22~30 (0.3~0.8mm).
5. USB Interface for optional fayaduino Nano board, FPGA, MCU.
6. Peripheral hardware:
LED(3 mode), Potentiometer, Pulser switch, Rotary encoder, Data
switches, Speaker, Power supply, Digital displays, Universal counter,
Function generator, Logic probe.
7. All signal generators have TTL and CMOS level, controlled by CMOS/
TTL switch.
8. Options: FPGA board (with USB Blaster), MCU board, faya-Nugget
Combo Pack.

Specifications
1. Function Generator/Counter 3. Pulser Switch
(1) Universal counter (1) Independent output
a. Frequency range : (2) With A, Ā output, Pulse width > 5ms
1Hz~99.99999MHz, 10Hz~100.00000MHz (3) TTL/CMOS level
b. Period range TH & TL : 4. Rotary Encoder
0.01μs~999999.99μs, 1μs~99999999μs (1) PA, PB signal output
c. Input signal :
(2) TTL/CMOS level
TTL or CMOS level or any level (Vmin≧+4.2Vp±10%)
5. Data Switches
d. Display : 8-digit 7-segment LED display
(1) 10 sets independently control output high/low
e. Mode switch : FG/FC
(2) TTL/CMOS level
(2) Function generator
6. Logic Probe
a. Output waveform :
(1) TTL and CMOS level
sine, square, triangle, TTL/CMOS (square only)
(2) MEM and Pulse switch
b. Frequency range : 1mHz~1MHz
(3) 5mm LED displays
c. Amplitude range : 100mVpp~18Vpp (open circuit)
(4) “Lo” and “Hi” LED display, low/high logic state
d. DC offset : -10V~+10V
respectively
e. TTL/CMOS output level : +5V±10% for TTL mode,
7. Speaker
3.3V~15V for CMOS mode
2. Potentiometer 8Ω / 0.5W to be used for load

(1) Variable resistor : 1KΩ(B) ,4-pin output 8. Adapter

(2) Variable resistor : 100KΩ(B) ,4-pin output For point tip / BNC socket exchange adapters, 2 sets

Electronics Circuits Equipment 24

 ETS-9000

9. Adjustable Power Supply

Options
1. FPGA Board (ETS-33051)
(1) Positive output voltage : 0~+15V±10%, pull to CMOS
Level :1.25V~16.25V±10%, continuously adjustable
(2) Negative output voltage : 0~-15V±10%, continuously
adjustable
USB Blaster
(3) Maximum output current : 500mA
(1) Chip : Altera EPM 570T100C5
10. Fixed Power Supply (2) Operating voltage : +5V
(1) Fixed DC output : +5V±10%, 1A (3) Digital input pins : 20
(4) Digital output pins : 16
(2) Fixed DC output : +3.3V±10%, 1A (5) Clock speed : 20MHz
(3) Fixed DC output : -5V±10%, 300mA (6) Interface : JTAG
(7) With USB blaster
11. Digital Displays
(8) User guide / sample code
(1) 4 sets of independent 7-segment LED display
2. MCU Board (ETS-33052)
(2) With BCD, 7-segment decoder/driver and DP input
(3) Input with 8-4-2-1 code
12. Breadboards
(1) Fitted on brick plate by brick posts USB ISP
(2) LA-60 x 4pcs : each 360 tie points, total 1440 tie points
(1) Chip : Atmel AT89S52
(3) Fitting solid leads AWG #22~30 (0.3~0.8mm) (2) Operating voltage : +5V
(3) Digital I/O pins : 32
(4) Clock speed : 8MHz
(5) Interface : USB ISP
(6) User guide / sample code

3. faya-Nugget Combo Pack (NGT-601)

Running Arduino experiments with fayalab
Electronic Blocks

13. Logic Indicators

12 bits LED display : TTL/CMOS mode
14. USB Jack
Main Controller :
Type A on front panel and Type B at the rear
fayaduino NANO
15. Power Switch and Fuse
Modules :
1. Touch Slider 7. IR Distance Sensor
2. RGB LED 8. DC Motor
Accessories 3. Color Sticker 9. Step Motor
1. Power Cord
4. Light Sensor 10. IR Receiver
2. USB Cable (Type A to Type B) 5. Humidity & Temperature Sensor 11. IR Transmitter
3. User Manual 6. IR Pulse Sensor 12. Basic Logic Gates

Accessories :
General Characteristic 1. Brick Post Pack
2. Brick Cap Pack
1. AC Power Input : AC 110V/220V, 50Hz/60Hz, ±10%, 1A
3. Mini USB Cable
2. Weight : 4Kg
4. Power Wire Pack
3. Operating Temperature : ambient temperature
5. Signal Wire Pack
6. Tutorial CD

25 Electronics Circuits Equipment 10805

Electronics Circuits Equipment

i de@Lab-200
Intelligent Digitize Emulated Achievement Lab

i de@Lab-200 intelligent digitize emulated achievement

lab is a digitized-based training system, which utilizes
integrated Hardware Platform, Experimental Modules
and Software Platform to help students to learn various
electronic subjects. Hardware Platform is composed of
multiple measuring instruments, such as digital storage
oscilloscope, logic analyzer, frequency synthesizer, digital
multimeters, and programmable DC power supply as
well as output display unit.
Experimental Modules contain versatile electronic
based topics for students to implement, including basic
electricity, electronic circuits and digital logic circuits.

*Notebook is excluded.

Features vSoftware
1. The i de@Lab (Intelligent Digitize Emulated Achievement Lab) The user interface of i de@Lab system contains the
is a multimedia digitized experiment / learning platform. It consists instruments (DMM, DSO, FG, PDC, LA) which correspond
of three major parts including hardware experiment platform, to the instruments equipped on the front panel of
experiment modules and application software platform. i de@Lab-21001A main unit, as well as the explanation
algorithm of the programming language for human-machine
2. The hardware experiment platform includes digital storage communication. For easy reference, the required data
oscilloscope, logic analyzer, frequency synthesis signal generator, and information are stored in experiment manual which
two digital multimeters, programmable DC power supply, represented in HTML format.
internal central control and coordination interface such as output Provide experimental simulation files(*.TSC)designed
display interface, module communication interface and the
by Tina Design Suite.
interface used for command and data exchange between
i de@Lab and personal computer.
v System Diagram
3. The operating modes of hardware experiment platform includes
a touch-panel manual control mode and a PC control mode via
USB interface.

4. The i de@Lab system separates modules into extension unit

and experiment module. The extension unit is designed to satisfy
the special needs of experiment modules. The subjects of
experiment modules cover basic electricity, electronic circuits,
and digital logic circuits. Each subject involves several experiment
modules. The application software platform contains the front-
panel controls and displays of hardware experiment platform,
experiment module window, procedure steps and experiment User Interface
manual.

Electronics Circuits Equipment 26

 i de@Lab-200

Specification 9. Extension Unit (i de@Lab-12001 Basic I/O Elements)

Main Unit ( i de@Lab-21001A) This unit extends the functions of main unit to satisfy the needs
of experiment tasks when it is added to the i de@Lab system.
1. Digital Storage Oscilloscope
(1) Channels :4 (1) Universal Counter :
(2) Input coupling : DC, AC Function : Logic Probe / Frequency / Period 8-digit
(3) Input impedance : 1 MΩ ± 2% // 17 pF 7-segment LED display and function
select key
(4) Max. input voltage : ± 50V
(2) LED Display : L0 ~ L7, input, TTL level
(5) Sample rate : 1ch ~ 1GSa/s
(3) Debounce PB switch : 4 pushbuttons PSW1~ PSW4 with
2ch ~ 1Sa/s ~ 500MSa/s by 1,2,5 sequence
Debounce outputs
4ch ~ 1Sa/s ~ 250MSa/s by 1,2,5 sequence
(4) Pulser : 2 sets, output A, A , TTL level with P.P. & P.S. switch
(6) Bandwidth : 1ch DC ~ 200 MHz
(5) Clock Generator : 1 set (50 Hz ~ 14 KHz), output, TTL level
2ch DC ~ 125 MHz
(6) Standard Frequency : 7 sets (0.1 Hz, 1 Hz, 10 Hz, 1 KHz, 10 KHz,
4ch DC ~ 80 MHz
100 KHz, 1 MHz), output, TTL level
(7) Resolution : 8 bits
(7) Data Switch : DP0 ~ DP7, output, TTL level
(8) Record length : 1ch~16K point
2ch~8K point
4ch~4K point
(9) Repetitive mode : Sampling up to 20 GHz

2. Logic Analyzer
(1) Channels : 12
12001
(2) Bandwidth : DC ~ 30MHz
(3) Record length : 4K point Experiment Modules
(4) Input impedance : 50KΩ // 9pF A series of experiment modules is designed for different subjects.
(5) Max. input voltage : ± 50V
(6) Threshold voltage : -4V~ +3.98V List of Modules
(7) Trigger word : 0, 1, x (don’t care) setting for all 1. i de@Lab-131xx : Basic Electricity
digital channels

3. DDS FG (Direct Digital Synthesis FG) 13101

(1) Channels : OUT, OUT, TTL Basic Device Module
(2) Waveform type : Sine, Square, Triangle, Ramp, GND
(3) Waveform amplitude range : 0 ~ 20Vpp
0 ~ 10Vpp to 50Ω load
(4) Frequency range : 1 Hz ~ 2M Hz
(5) Frequency resolution : 0.03Hz
(6) Waveform DC offset range : 0 ~ ± 10V
0 ~ ± 5V to 50Ω load 13102
(7) Output impendence : 50Ω ±10% Basic Electricity Experiment Module

4. DMM1 and DMM2 (Digital Multi-Meters)

(1) Resistance (Ω) : 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ
auto range
(2) DC Voltage (DCV) : 400mV, 4V, 40V auto range
Input Impedance : ≥10MΩ
(3) AC Voltage (ACV) : 400mV, 4V, 40V, 400V rms auto range 13103
Magnetism Element Introduction Module
Input Impedance : ≥ 10MΩ
(4) DC Current (DCA) : 400mA(0.5A/250V fuse protected)
(5) AC Current (ACA) : 400mA(0.5A/250V fuse protected)

5. Programmable DC Power Supply

DC output : 2 channels
• Positive output : 0.5 ~ 10 V / 0.5A
13104
• Negative output : -0.50 ~ -10 V / 0.5A Magnetic Field Module

6. Fixed DC Output : +12V / 0.5A, -12V / 0.5A, +5V / 0.5A

7. Breadboard (i de@Lab-90001) :
1680 tie-point breadboard module

8. Communication and Display Interface 13105

(1) PC control and display : Communicating with PC via USB cable Ampere's Rule Module
(2) Manual control and display : Touch panel (5.7" TFT-LCD with
640 x 480 resolution and 256K color.)

27 Electronics Circuits Equipment

i de@Lab-200

13106 13208
Fleming's Rule Module OP Amplifier Circuit Module (3)

13209
OP Amplifier Circuit Module (4)
13107
Electromagnetic Induction

13210
OP Amplifier Circuit Module (5)
2. i de@Lab-132xx : Electronic Circuits

13201
Diode, Clipper & Clamper Module 3. i de@Lab-133xx : Digital Logic Circuits

13301
Combinational Logic Circuit Experiment Module (1)

13202
Rectifier, Differential & Integral Circuit Module

13302
Combinational Logic Circuit Experiment Module (2)

13203
Transistor Amplifier Circuit Module

13303
Combinational Logic Circuit Experiment Module (3)

13204
Multi-Stage Amplifier Circuit Module
13304
Combinational Logic Circuit Experiment Module (4)

13205
FET Circuit Experiment Module 13305
Combinational Logic Circuit Experiment Module (5)

13206
OP Amplifier Circuit Module (1) 13306
Sequential Logic Circuit Experiment Module (1)

13207 13307
OP Amplifier Circuit Module (2) Sequential Logic Circuit Experiment Module (2)

Electronics Circuits Equipment 28

 i de@Lab-200

List of Experiments 8 i de@Lab-132xx : Electronic Circuits

8 i de@Lab-131xx : Basic Electricity ● 13201 Diode, Clipper & Clamper Module
● 13101 Basic Device Module 1. V-I curve of Si diode - DSO
1. Potentiometer characteristics 2. V-I curve of Si diode (Forward) - DMM
2. Resistor characteristics
3. V-I curve of Si diode (Reverse) - DMM
3. Inductor characteristics
4. Diode characteristics 4. V-I curve of Ge diode (Forward) - DMM
5. Zener diode characteristics 5. V-I curve of Ge diode (Reverse) - DMM
6. LED characteristics 6. V-I curve of Ge diode - DSO
7. Capacitor characteristics 7. V-I curve of Zener diode (Forward) - DMM
8. FET characteristics
8. V-I curve of Zener diode (Reverse) - DMM
9. Transistor characteristics
9. V-I curve of Zener diode - DSO
10. SCR characteristics
11. UJT characteristics 10. Series diode clipping circuit
11. Series diode clipping circuit with bias
● 13102 Basic Electricity Experiment Module
1. DC voltage measurement 12. Parallel diode clipping circuit
2. DC current measurement 13. Parallel diode clipping circuit with bias
3. Ohm's law application 14. Diode clamping circuit
4. AC voltage measurement 15. Diode clamping circuit with bias
5. Series network and kirchhoff's law
16. Testing for the relation between I and brightness
6. Power in DC circuit
17. Measuring I values of LED
7. Maximum power transfer theorem
8. Power in AC circuit 18. Photodiode characteristics
9. Parallel network and kirchhoff's law
● 13202 Rectifier, Differential & Integral Circuit Module
10. AC current measurement
1. Measuring Ie, Ib and Ic of PNP transistor
11. Superposition, thevenin's and norton's theorems
12. DC RC circuit and transient phenomena 2. Measuring Ie, Ib and Ic of NPN transistor
13. AC RC circuit 3. Transistor characteristic curves
14. DC RL circuit and transient phenomena 4. Voltage doubler
15. AC RL circuit
5. Half-wave rectifier without filter capacitor
16.Transformer characteristics
17. AC RLC circuit 6. Half-wave rectifier with filter capacitor
18. Series-resonant circuit 7. Full-wave rectifier without filter capacitor
19. Parallel-resonant circuit 8. Full-wave rectifier with filter capacitor
20. Wheastone bridge 9. Bridge rectifier without filter capacitor
● 13103 Magnetism Element Introduction Module 10. Bridge rectifier with filter capacitor
1. Compass characteristic 11. Dual-power rectifier
2. Drawing magnetic curves 12. RC circuit
3. Reed switch characteristic 13. Differentiator circuit
4. Reed relay characteristic
14. Integrator circuit
5. Relay characteristic
15. RL circuit
6. SSR relay characteristic
● 13203 Transistor Amplifier Circuit Module
● 13104 Magnetic Field Module 1. CE Amplifier fixed bias
1. Magnetic field
2. CE Amplifier emitter self-bias
2. Lenz's and faraday's laws
3. Magnetic field strength 3. CE Amplifier bias independent of β value
4. CE Amplifier collector-feedback bias
● 13105 Ampere's Rule Module
5. Common-base amplifier
1. Ampere's rule 1
6. Common-collector amplifier
2. Ampere's rule 2
7. Measuring ON and Off current of transistor
● 13106 Fleming's Rule Module 8. Transistor used as relay driver
1. Fleming's rule 1
2. Fleming's rule 2 ● 13204 Multi-Stage Amplifier Circuit Module
1. RC-coupled amplifier
● 13107 Electromagnetic Induction
2. Direct-coupled amplifier
1. Self induction
2. Mutual induction 3. Dual-end push-pull amplifier
3. Magnetic flux detection 4. Transformer-coupled amplifier

29 Electronics Circuits Equipment

i de@Lab-200

● 13205 FET Circuit Experiment Module ● 13210 OP Amplifier Circuit Module (5)
1. Measuring basic characteristics of darlington Amplifier 1. Monostable multivibrator
2. Photoelectric control circuit 2. Astable multivibrator square wave generator
3. Time delay circuit 3. Astable multivibrator pulse generator
4. JFET measuring IDSS 4. Sine wave oscillator RC phase-shift
5. JFET measuring IGS 5. Sine wave oscillator wien bridge
6. JFET measuring VP 8 i de@Lab-133xx : Digital Logic Circuits
7. MOSFET measuring IDSS ● 13301 Combinational Logic Circuit Experiment Module (1)
8. MOSFET measuring VP 1. Constructing XOR gate with basic gates
9. JFET CS amplifier with self - bias 2. AOI gate circuits
10. JFET CS amplifier with voltage - dividing bias 3. Constructing comparator with basic logic gates
11. JFET CD amplifier with self - bias 4. NAND gate circuit
12. JFET CD amplifier with voltage - dividing bias 5. Constructing XOR gate with NAND gates
13. MOSFET CS amplifier with self - bias 6. TTL circuit
14. MOSFET CS amplifier with voltage - dividing bias 7. Measuring TTL threshold voltage

● 13206 OP Amplifier Circuit Module (1) 8. Measuring TTL I/O voltage and current
1. Differential amplifier in OP Amp 9. Measuring AND gate characteristics
2. OP AMP measuring Zi 10. Measuring OR gate characteristics
11. Measuring NOT gate characteristics
3. OP AMP measuring Zo
12. Measuring NAND gate characteristics
4. OP AMP measuring slew rate
13. Measuring NOR gate characteristics
5. OP AMP measuring bandwidth
14. Measuring XOR gate characteristics
6. OP AMP adjusting offset voltage of inverting amplifier
15. NOR gate circuit
7. OP AMP adjusting offset voltage of noninverting amplifier
16. CMOS circuit
17. Measuring CMOS threshold voltage
● 13207 OP Amplifier Circuit Module (2)
1. Clipping circuit 18. Measuring CMOS voltage and current
2. Constant voltage circuit ● 13302 Combinational Logic Circuit Experiment Module (2)
3. Constant current circuit 1. Constructing half-and full-adders with basic logic gates
4. Differentiator 2. Constructing half-and full-subtractors with basic logic gates
5. Integrator 3. Parity generator constructed with XOR gates
6. Inverting amplifier 4. Constructing 4-bit full-adder with IC
7. Noninverting amplifier 5. Constructing BCD adder
8. Voltage follower 6. Constructing 4-bit full-subtractor with IC
9. Subtractor 7. Constructing 4-to-10-line decoder with TTL IC
10. Adder
● 13303 Combinational Logic Circuit Experiment Module (3)
● 13208 OP Amplifier Circuit Module (3) 1. Constructing 4-to-2-line encoder with basic gates
1. Active high-pass filter 2. Constructing BCD-to-7-segment decoder
2. Active low-pass filter 3. Constructing 2-to-4-line decoder with basic gates
3. Active band-pass filter
● 13304 Combinational Logic Circuit Experiment Module (4)
4. Instrumentation amplifier
1. Constructing 10-to-4-line encoder with TTL IC
● 13209 OP Amplifier Circuit Module (4) 2. Constructing 1-to-8-line demultiplexer with CMOS IC
1. Tone control circuit 3. Analog multiplexer / demultiplexer circuits
2. Zero comparator 4. Constructing 2-to-1-line multiplexer with basic gates
3. Comparator with bias 5. Constructing 1-to-2-line demultiplexer with basic gates
4. Schmitt trigger 6. Using multiplexer to create function
5. Window comparator
7. Constructing 8-to-1-line multiplexer with TTL IC

Electronics Circuits Equipment 30

 i de@Lab-200

● 13305 Combinational Logic Circuit Experiment Module (5) System Requirement

1. Constructing comparator with TTL IC 1. PC : 1GHz or faster 32-bit (x86) or 64-bit (x64) processor,
2. Arithmetic logic unit (ALU) circuit 512 MB RAM, 200 MB more free disk space
3. Parity generator IC
2. OS : Windows XP / Vista / 7 / 8
● 13306 Sequential Logic Circuit Experiment Module (1)
1. Constructing shift register with D flip-flops
2. Preset left / right shift register Accessory
3. Constructing RS flip-flop with basic logic gates i de@Lab-13191 / i de@Lab-13291 / i de@Lab-13391
4. Constructing D flip-flop with RS flip-flop 1.USB cable
5. Constructing JK flip-flop with RS flip-flop 2.Connection leads and plugs : 1 set
6. Constructing master-slave JK flip-flop with RS flip-flop 3.CD (i de@Lab-131xx / i de@Lab-132xx / i de@Lab-133xx)
7. Constructing noise elimination circuit with RS flip-flops 4.User manual : 1 set
5.Storage cabinet ( i de@Lab-13292) : 1 set
● 13307 Sequential Logic Circuit Experiment Module (2) 6.Oscilloscope probe kit : 4 set
1. Moving LED control
2. Constructing divide-by-8 counter with 7490
3. Constructing BCD counter with 7490 Option
4. Traffic light control 1. Circuit simulation software TINA design suite
5. Constructing divide-by-8 counter with JK flip-flops 2. DF-600 Differential Active Probe
6. Constructing synchronous counter with JK flip-flops

DF-600 Differential Active Probe

Characteristics
With 10:1 With 200:1
Parameter Remarks
attenuator attenuator
50 Ω input
600MHz (Differential)
Bandwidth impedance
400MHz (Single-Ended)
oscilloscope
DC gain accuracy 1.0%
Voltage Input Range
≦ 30 V ≦ 620 V (DC+AC peak to peak)
(Differential)
Voltage Input Range
≦ 15 V ≦ 310 V (DC+AC peak to peak)
(Single-Ended)
DF-600 Differential Active Probe is a high
Rising time ≦ 300ps
input impedance and low input capacitance probe
that is compatible with any 50Ω input oscilloscope 2.06 MΩ // 1.5pF
Input Impedance (Between terminals and ground)
and provides two kinds of Differential and Single- Resistance
Capacitance 4.12 MΩ // 0.9 pF
Ended measurement mode. (Differential)
Output termination
50Ω
impedance
Power
USB support 5V
Requirement

Weight Approximately 110 Grams

Cable Length 1.2m

31 Electronics Circuits Equipment 10805

Electronics Circuits Equipment
 PLC

K&H reserves the right to make changes without notice 10805