05-OCT-2020 56312E33

RYWDB00

Industrial grade 802.11a/b/g/n 2.4GHz & 5GHz 802.11j 1T1R Wi-Fi,

dual-mode Bluetooth 5 mini PCIe card

Datasheet
 RYWDB00
Industrial grade 802.11a/b/g/n/j 2.4GHz&5GHz 802.11j 1T1R Wi-Fi, dual-mode Bluetooth 5 mini PCIe card

PRODUCT DESCRIPTION
The RYWDB00 provides a comprehensive multi-protocol wireless connectivity solution including
802.11 a/b/g/n (2.4 GHz & 5 GHz), 802.11j, dual-mode Bluetooth® 5

FEATURES
• Redpine Signals RS9116 Industrial grade core.

Wi-Fi
• Compliant to single-spatial stream IEEE 802.11 a/b/g/n, 802.11j (hosted mode) with dual band
(2.4 and 5 GHz) support
• Support for 20 MHz and 40 MHz channel bandwidths
• Transmit power up to +18 dBm with integrated PA
• Receive sensitivity as low as -96.5 dBm
• Application data throughput up to 100 Mbps (Hosted Mode) in 802.11n with 40 MHz
bandwidth and up to 50 Mbps with 20 MHz bandwidth
• Standard mini PCIe and plug PCB design.
• Temperature range: -40 to +85°C.
• Mini PCIe Signal Type USB2.0 HS.

Bluetooth
• Compliant to dual-mode Bluetooth 5
• Transmit power up to +17 dBm with integrated PA
• Receive sensitivity as low as -104 dBm
• Data rates: 125 kbps, 500 kbps, 1 Mbps, 2 Mbps, 3 Mbps

Hosted Mode
• Host drivers for Linux.
• Support for Client mode, Access point mode, Wi-Fi Direct, Concurrent client and access point
mode, Enterprise Security.
• Support for concurrent Wi-Fi, dual-mode Bluetooth 5

Copyright © 2020, REYAX TECHNOLOGY CO., LTD. 2

 RYWDB00
Industrial grade 802.11a/b/g/n/j 2.4GHz&5GHz 802.11j 1T1R Wi-Fi, dual-mode Bluetooth 5 mini PCIe card

BLOCK DIAGRAM

PIN CONNECTOR

Main Antenna Auxiliary Antenna

U.FL-R-SMT-1 U.FL-R-SMT-1
Connector Connector

Pin1 Pin51 Pin52 Pin2

Copyright © 2020, REYAX TECHNOLOGY CO., LTD. 3

 RYWDB00
Industrial grade 802.11a/b/g/n/j 2.4GHz&5GHz 802.11j 1T1R Wi-Fi, dual-mode Bluetooth 5 mini PCIe card

PIN DESCRIPTION
Pin Name Input/Output Description
1 NC Not connected
2 VCC Power Power Input
3 NC Not connected
4 GND Power Ground
5 NC Not connected
6 NC Not connected
7 NC Not connected
8 NC Not connected
9 GND Power Ground
10 NC Not connected
11 NC Not connected
12 NC Not connected
13 NC Not connected
14 NC Not connected
15 GND Power Ground
16 NC Not connected
17 NC Not connected
18 GND Power Ground
19 NC Not connected
20 NC Not connected
21 GND Power Ground
22 RESET_N Input External reset input
23 NC Not connected
24 VCC Power Power Input
25 NC Not connected
26 GND Power Ground
27 GND Power Ground
28 NC Not connected
29 GND Power Ground
30 NC Not connected
31 NC Not connected
32 NC Not connected
33 NC Not connected

Copyright © 2020, REYAX TECHNOLOGY CO., LTD. 4

 RYWDB00
Industrial grade 802.11a/b/g/n/j 2.4GHz&5GHz 802.11j 1T1R Wi-Fi, dual-mode Bluetooth 5 mini PCIe card

34 GND Power Ground

35 GND Power Ground
36 USB_DN Input/Output USB Data Negative
37 GND Power Ground
38 USB_DP Input/Output USB Data Positive
39 VCC Power Power Input
40 GND Power Ground
41 VCC Power Power Input
42 NC Not connected
43 GND Power Ground
44 NC Not connected
45 NC Not connected
46 NC Not connected
47 NC Not connected
48 NC Not connected
49 NC Not connected
50 GND Power Ground
51 NC Not connected
52 VCC Power Power Input

Copyright © 2020, REYAX TECHNOLOGY CO., LTD. 5

 RYWDB00
Industrial grade 802.11a/b/g/n/j 2.4GHz&5GHz 802.11j 1T1R Wi-Fi, dual-mode Bluetooth 5 mini PCIe card

SPECIFICATION
Feature Description

Wireless Protocols IEEE 802.11b, 802.11g, 802.11n, 802.11a Bluetooth 5 (2.1+EDR, LE,
LE 2 Mbps, Long Range (125/500 Kbps))
Operational Modes Wi-Fi Access Point with support for up to 32 clients
Supported Wi-Fi Client
Wi-Fi Direct®
Wi-Fi Client + Bluetooth Classic (EDR v 2.1)
WLAN Bandwidth WLAN Bandwidth
WLAN Data Rates 802.11b: 1, 2, 5.5, 11 Mbps
802.11g/a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: MCS0 to MCS7
WLAN Operating 2412 MHz – 2484 MHz
Frequency Range 4.9 GHz – 5.975 GHz
WLAN Modulation OFDM with BPSK, QPSK, 16-QAM, and 64-QAM 802.11b with CCK
and DSSS
Maximum WLAN 2.4 GHz: 18 dBm, 5 GHz: 13.5 dBm
Transmit Power
Minimum WLAN 2.4 GHz: -96.5 dBm, 5 GHz: -89 dBm
Receive Sensitivity
Bluetooth Data Rates 1, 2, 3 Mbps, 125 Kbps and 500 Kbps
Bluetooth Operating 2.402 GHz - 2.480 GHz
Frequency
Bluetooth Channel BR, EDR, LE 1 Mbps, LR - 1 MHz
Spacing LE 2 Mbps - 2 MHz
Bluetooth Modulation GFSK, DQPSK, 8DPSK
Maximum Bluetooth 17 dBm (Class-1)
Transmit Power
Minimum Bluetooth LE: -93 dBm, LR 125 Kbps: -104 dBm
Receive Sensitivity
Wireless Security WPA/WPA2-Personal
Features WPA/WPA2 Enterprise for Client
EAP-TLS
EAP-FAST

Copyright © 2020, REYAX TECHNOLOGY CO., LTD. 6

 RYWDB00
Industrial grade 802.11a/b/g/n/j 2.4GHz&5GHz 802.11j 1T1R Wi-Fi, dual-mode Bluetooth 5 mini PCIe card

EAP-TTLS
PEAP-MSCHAP-v2
Advanced Security PUF Based Security
Features AES 128/256 bit
RSA
SHA, SHA256, SHA384
Application Up to 40 Mbps (As measured in ideal environment. Note that
throughputs throughput degrades in the presence of interference and reduces
with range)
Operating -40 C̊ to +85 C̊
Temperature Range
Supply Voltages +3.1V to +3.5V
Supply Current 450mA
WLAN Features • Dynamic selection of fragment threshold, data rate, and
antenna depending on the channel statistics
• Hardware accelerators for WEP 64/128-bit, TKIP, AES and WPS
• Support for WMM
• Support for AMPDU Aggregation/De-aggregation and AMSDU
De-aggregation
Bluetooth Features • Supports EDR+2.1, 4.0, 4.1, 4.2 and 5.0.
• Supports LE 1 Mbps and 2 Mbps and Long Range modes.
• Supports Classic mode piconet with seven active slaves. (two
slaves in current release)
• Supports Low Energy mode with six active slaves.
• Bluetooth security features: Authentication, Pairing and
Encryption.
• Supports low power connection states such as sniff (with
selectable sniff intervals).
• Adaptive Frequency Hopping (AFH), Interlaced scanning,
Quality of Service
• Proprietary FEC for DQPSK and 8-PSK modes
• Provides finer granularity of range vs. throughput control.
• BR/EDR secure connections, Train Nudging, Generalized
interlaced scan, Low duty cycle directed adverting, Piconet
clock adjustment, WMS coexistence, Slot availability mask
(SAM)
• Dual mode support, 32-bit UUID in LE, LE privacy, LE ping, LE
L2CAP connection oriented channel, Connectionless slave

Copyright © 2020, REYAX TECHNOLOGY CO., LTD. 7

 RYWDB00
Industrial grade 802.11a/b/g/n/j 2.4GHz&5GHz 802.11j 1T1R Wi-Fi, dual-mode Bluetooth 5 mini PCIe card

broadcast, Fast advertising interval, LE data packet extension,

LE secure connections, Link layer privacy, LE advertising
extensions, LE channel selection algorithm2, high duty cycle
non-connectable advertising.
Bluetooth Profiles GAP, GATT, SPP, SDP, SMP, L2CAP, RFCOMM
Weight 4g

Copyright © 2020, REYAX TECHNOLOGY CO., LTD. 8

 RYWDB00
Industrial grade 802.11a/b/g/n/j 2.4GHz&5GHz 802.11j 1T1R Wi-Fi, dual-mode Bluetooth 5 mini PCIe card

DIMENSIONS

unit: mm Tolerance : ±0.2mm

Copyright © 2020, REYAX TECHNOLOGY CO., LTD. 9

 RYWDB00
Industrial grade 802.11a/b/g/n/j 2.4GHz&5GHz 802.11j 1T1R Wi-Fi, dual-mode Bluetooth 5 mini PCIe card

FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.

LABEL OF THE END PRODUCT:

The final end product must be labeled in a visible area with the following " Contains TX FCC ID : XF6-M7DB6". If the size of the end
product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies
with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference
and (2) this device must accept any interference received, including interference that may cause undesired operation.

XF6-M7DB6

Taiwan: [email protected]
China: [email protected]
http://reyax.com

Copyright © 2020, REYAX TECHNOLOGY CO., LTD. 10