Discover Leading Broker XM

Edudelight.com
Invest with Multi-Award-Winning Platforms and 24/7 Support in
30+ Languages at XM.

XM Sign Up

- SCHOOL MANAGEMENT GUIDE – S…

_

BASIC TECHNOLOGY
EXAM QUESTIONS FOR
JSS2 THIRD TERM
! 6 minutes read

" # $ % &

JSS2 THIRD TERM BASIC

TECHNOLOGY
EXAMINATION QUESTIONS
– EDUDELIGHT.COM
Examination malpractices may lead to a repeat
of the subject or suspensions don’t be involved.

CLASS:  J.S.S 2

SUBJECT: BASIC TECH

1.            Engineers should be good at

____________ a. Literature b. sport 
c.mathematics            d. accounting

2.            __________produce conceptual models

of building which are translated to a set of
architectural drawings
a.lawyerb.athletesc.artisted.architect

3.            The process of splitting the log into

marketable sizes is known as    a. seasoning
b.fellingc.preservativesd.conversion

4.            A/an______ is any feature that reduce

the quality value of timber a.defectb.effect
c.veneer d.board

5.            A steel is a mixture of iron and_________

a.carbon b. copper c.zincd.tin

6.            Metals can be obtained from rocks these

rocks are known as_________ a.moltenb.drill c.
ore d. base

7.            Ceramics are product made from

_________ and dried to hardness.a.glass b.clay
c.metals d. wood

8.            A cube has _______ faces a.8 b.12 c.6

d.10

9.            A form of pictoral drawing which is

inclined at 300 to the horizontal plane is called
a.obliqueb.isometricc.perpendicular d.
orthographic

10.          The process of heating and melting ore Is

called a.smeltingb.casting c. alloy d. stage

11.          There are ______ main methods of

orthographic projection. A.threeb.fourc.two d. six

12.          _______ refers to glue or resin used for

joints fitting a. fitting b.adhesives c. nail d.sander

13.          one of these is not a joint

a.dovetailb.plain lap c. mortic and tenon d. wood
lathe

14.          Angle on a straight line is ________ a.180

b. 360 b.45 c.90

15.          Which of these polygons has four sides

a. Triangle b.quadrilateralc.pentagon d. octatgon

16. A polygon with 10 sides is known as (a)

Decagon   (b) Hexagon   (c) Octagon       (d)  
Pentagon

17. A quadrilateral with opposite sides equal and

opposite is known as (a) Polygon  (b)
Parallelogram    (c) Decagon       (d)   Hexagon

18. ____________ is an example of(a) Thin

continuous     (b) Thin long chain   (c) Thin wavy  
  (d)   Thin short

19. A line that divides a circle into two halves is

known as(a) Chord    (b) Tangent  (c) Radius   (d)  
Diameter

20. __________ is a straight line drawn from the

center of the circumference.  (a)Tangent   (b)
Radius    (c) Chord      (d)   Tangle

21.          Hardware examples includes the

following except ____________

                (A)Monitor (B) mouse (C) operating

system (D) keyboard

22           F.M
Means_____________________________________
____________3    One of these is 23. an example
of analogue signal/device

(A) Computer system (B) human voice (C) dvd

player (D) plasma tv

24           The demerits of the internet includes

these except ____________________  

Read Also

GEOGRAPHY EXAM
QUESTIONS FOR SS1 THIRD
TERM

EXAMINATION CCA EXAM QUESTIONS FOR

JSS2 THIRD TERM

                (A) Access to library (B) pornography

(C) cybercrime (D) fraud

25           Ferrous metal are metal which contains

_____________________

                (A) Cupper (B) iron (C) carbon (D)

silicon

26           The basic material for the production of

ceramics is _________________

                (A) Clay (B) humidity (C) resuscitation

(D) temperature

27           A.M Means

______________________            

28           Tyres is made from

______________________________________

                (A) Ceramic (B) rubbers (C) metals (D)

wood

29           G.S.M Stands for

___________________________________________
________

___________________________________________

30           ____________is the degree of hotness or

coldness of a body or place

                (A) Pressure (B) humidity (C)

resuscitation (D) temperature

31           The following are software except

___________________

                 (A)Cedar (B) pine (C) iroko (D) spruce

32           The letter “S” in S.I.M Stand for

_____________________

                (A) Server (B) subscriber (C) system (D)

source

33           Bronze is an alloy of ______________

and copper

                (A) Tin (B) zine (C) sliver (D) aluminum

34           Ceramics have been used for ages in

________________

                (A) Law (B) medicine (C) sculpture (D)

politics

35           Gentian violet is _________________ in

colour

                (A) Red (B) yellow (C) white (D) purple

                                                                               
THEORY

Attempt all questions

1a           Define the term

                (i) Analog signal (ii) digital signal

1b           in tabular form, state five differences

between analog and digital signal

1c            Draw the analog and d digital signal

2a           Define the terms

                (i) First aid (ii) first aid box

2b           List ten items that can be found in the

first aid box

2c            who is a first aider

3a           what is an alloy?

3b           Give five examples of alloy

3c            Distinguish between nature and

synthetic rubbers.

c.             What are search engines used for?

2.            Who is a computer professional?

b.            Name four categories of computer

professional

c.             State four qualities of a good computer

professional

3a.          Define the term ‘Digital divide’

B.            State the effects of digital divide

BASIC TECHNOLOGY EXAM QUESTIONS FOR

JSS2 THIRD TERM

 Subject: BASIC TECHNOLOGY

Duration: 2HRS

Class: JSS 2

OBJECTIVE     

1. ___________ are basically four sided plane

figure (a) Quadrilaterals (b) Polygons (c)
Board practice (d) Drawing boards

2. __________ all sides and angles are equal (a)

Square (b) Rectangle (c) Trapezium (d) Kite

3. __________ are plane figures bounded by

more than four straight lines . (a) Trapezium
(b) Square (c) Polygons (d) Kite

4. Pentagon  has _______ Sides (a) 6 (b) 5 (c)

8 (d) 10

5. Polygon with 8 sides is Called ________ (a)

Heptagon (b) pentagon (c) Octagon (d)
Decagon

6. Polygon with Six Sides is Called _______

(a)Octagon (b) Hexagon (c) Decagon (d)
Heptagon

7. __________ is a Straight line which touches

the circumference at a Point (a) Tangent (b)
Arcs (c) Rectangle (d) Square

8. ________ is a Plane figure bounded by three

straight lines  (a) Rectangle (b) Triangle (c)
Square (d) Trapezium

9. _________ is a triangle that has three equal

sides and three angles (a) Equilateral
Triangle (b) Isosceles Triangle (c) Scalene
Triangle  (d) Right angle Triangle

10. __________ Can be defined as an operation

organized to free from danger (a) First aid
operation (b) Rescue operation (c)
Responsive operation (d) Caring operation

11. Which of the following cannot be regarded

as a rescue operation (a) Vehicle-extrication
rescue operation (b) Surface water rescue
operation (c) Air – Sea rescue operation (d)
First aiding

12. Workshop accident includes the following

except (a) Fracture (b) Bleeding (c) voltaging
(d) Wound

13. ________ is a table on which wood workers

perform his operation (a) Workbench (b)
Imperial board (c) Dove Tail table (d) Tenon
Table

14. Mixture of Sand, gravel, cement with water is

Called (a) Plastering (b) rendering (c)
Concrete (d) Plastics

15. ________ is the name of buildings that

contains many rooms on two floors (a)
Duplex (b) Bungalow (c) hut (d) High – Rise

16. Angles can be measured using ____ (a)

French Curve (b) Compass (c) Protractor

17. The instrument used for drawing irregular

curve is called (a) divider (b)     Compass (c)
Scale Rule (d) French Curve

18. The following methods can prevent accident

while working in the workshop, except (a)
always use the right tools for each job (b)
Always keeps to instructor (c) Avoid using
worn out tools (d) Always do more than two
jobs at the same time

19. ________ are equipment used in order to

achieve safety? (a) Safely devices (b) Fire
extinguishers (c) Fire alarm (d) Fire buckets

20. Metals can be classified into _______ (a) Six

(b) Five (c) Four (d) two

21. Papers are manufactured   from _______

ceramics (b) Ferrous (c) alloy (d) wood

22. The major purpose of maintenance in

engineering is to ________ (a) Keep it in
good working condition (b) Prevent from
making loud noise (c) Stop it from working
too long (d)Enable it to last forever

23. Workshop accident includes the following

except (a) Fracture (b) Bleeding (c)
Plastering (d) Wound

24. One of the following is not among the rescue

safely measures (a) Face cap (b) Safely boot
(c) hand gloves (d) helmets

25. First – aid can be used to care for the

following except (a) Accident (b) Injury (c)
Headache (d) Blood Donation

26. __________ is used for transferring

measurement (a) Divider (b) punches (c)
Micrometer (d) Try square

27. _________  is drawn at the bottom right hand

corner of the drawing paper  (a) Boarder
lines (b) Title block (c) Lettering (d) Figures

28. _______ are poor conductors of heat and

electricity (a) Plastics (b) Metal (c) Copper
wire (d) Conductors

29. ___________ Plastic can be softened into

liquid form and remoulded (a) Thermosetting
(b) Electric Plastic (c) Ceramic (d) Synthetic
rubber

30. Any material that allows free flow of

electrons and electricity is Called _________
(a) Insulator (b) Conductors (c) Ceramics (d)
Synthetic

31. The brown material between electric poles

and the electric wire is Called (a) Insulators
(ceramic) (b) Thermoplastic (c) Synthetic (d)
Vulcanization

32. Glass belong to _________ family (a)

 Plastics (b) Synthetic rubber (c) Thermo set
Plastics (d) Ceramics.

33. Which of the following can be used for

drawing vertical and inclined lines ? (a)
Protectors (b) Scale rule (c)  Compass (d)
Set square

34. Scale rules are used to produce (a) Reduced

or enlarged sizes (b) Equal and normal size
of drawing (c) Enlarged sizes of drawing (d)
A good Linear drawing

35. Which of the procedures comes first in

Constructing a building (a) Excavation (b)
concreting (c) Level (d) Site preparation

36. Which of the following is not  a Quadilateral

(a) Prism (b) Rhomboid (c) Rhombus (d)
Parallelogram

37. __________ are used to reduce wear and

tear (a) Lubricant (b) Vulcanization (c)
Synthetic (d) Abrasives

38. Oil and Grease are used as_______ (a)

Vulcanization (b) Lubricants (c) Synthetics
(d) abrasives

39. Polygon with (10) Ten sides is Called (a)

Pentagon (b) Heptagon (c) Nonagon (d)
Decagon   

40. We have                types of technology (a) 5  

(b) 4    (c) 3    (d) 2

JSS2 THIRD TERM BASIC TECHNOLOGY

EXAMINATION QUESTIONS –
EDUDELIGHT.COM

THEORY:          Answer only three Question

1a Define Polygon             b   Construct the

following polygon

i   Pentagon  AB   50mm             ii  Hexagon  AB   

70mm        iii  Octagon   AB    70mm

2a Define Friction         b   State two advantages

and two disadvantages of friction

c Differentiate between Lubrication and

Lubricants

d Mention two Lubricant used in reducing friction

3a Explain five care and maintenance that must

be given to wood work machines

b Explain two function of lathe machine

4 Sketch five workshop hard tools and Explain

their uses

5a Explain the uses of the following technical

drawing instrument

i Tee   Square

ii Protractor

iii Set Square

iv  Compass

v  Divider

b   Sketch tee square and label the parts

JSS2 THIRD TERM BASIC TECHNOLOGY

EXAMINATION QUESTIONS –
EDUDELIGHT.COM

" ' $ % & (

Lessonplan
Get Lesson plans, Lesson notes, Scheme of work, Exam
Questions, Test Questions for all subject for Primary
school and Secondary School.

JSS3 Third Term Examination Questions

* ,+
HOME ECONOMICS MOCK EXAM
QUESTIONS FOR JSS3