0% found this document useful (0 votes)
44 views

3trigonometric Formulae

1. Degrees and radians are units used to measure angles, with 1 degree equal to π/180 radians approximately. 2. Trigonometric functions are defined for angles and include sine, cosine, tangent, cotangent, secant, and cosecant. 3. Important trigonometric identities relate the trig functions of sums and differences of angles, as well as double and half-angle identities.

Uploaded by

Mahek Irfan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
44 views

3trigonometric Formulae

1. Degrees and radians are units used to measure angles, with 1 degree equal to π/180 radians approximately. 2. Trigonometric functions are defined for angles and include sine, cosine, tangent, cotangent, secant, and cosecant. 3. Important trigonometric identities relate the trig functions of sums and differences of angles, as well as double and half-angle identities.

Uploaded by

Mahek Irfan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

XI- MATHS Trigonometric Functions - Results

Degree measure
1 𝑡ℎ
If a rotation from the initial side to terminal side is (360) of a revolution, the angle is said to have a
measure of one degree, written as 1°. A degree is divided into 60 minutes, and a minute is divided into
60 seconds. One sixtieth of a degree is called a minute, written as 1’, and one sixtieth of a minute is
called a second, written as 1’’
Thus, 1° = 60’, 1 = 60″
Radian measure
Angle subtended at the centre by an arc of length 1 unit in a unit circle (circle of radius 1 unit) is said
to have a measure of 1 radian.
Relation between degree and radian
Since a circle subtends at the centre an angle whose radian measure is 2π and its degree measure is
360°, then
2π radian = 360° or π radian = 180°
180
1 𝑟𝑎𝑑𝑖𝑎𝑛 = = 57° 16′ 𝑎𝑝𝑝𝑟𝑜𝑥𝑖𝑚𝑎𝑡𝑒𝑙𝑦.
𝜋
𝜋
𝐴𝑙𝑠𝑜 1° = 180radian = 0.01746 radian approximately.
Trigonometric functions of negative angles.

Let θ be any angle. Then,


sin (–θ) = – sin θ, cos (– θ) = cos θ
tan (– θ) = – tan θ sec (–θ) = sec θ
cot (–θ) = – cot θ
cosec (– θ) = – cosec θ

𝑆𝑖𝑛2 𝐴 + 𝐶𝑜𝑠 2 𝐴 = 1, 1 + 𝑇𝑎𝑛2 𝐴 = 𝑆𝑒𝑐 2 𝐴, 1 + 𝐶𝑜𝑡 2 𝐴 = 𝐶𝑜𝑠𝑒𝑐 2 𝐴

Trigonometric Formulae.
𝑪+𝑫 𝑪−𝑫
𝑆𝑖𝑛 (𝐴 + 𝐵) = 𝑆𝑖𝑛 𝐴 𝐶𝑜𝑠 𝐵 + 𝐶𝑜𝑠 𝐴 𝑆𝑖𝑛 𝐵 𝑺𝒊𝒏𝑪 + 𝑺𝒊𝒏 𝑫 = 𝟐 𝑺𝒊𝒏 ( ) 𝑪𝒐𝒔 ( )
𝟐 𝟐
𝑪+𝑫 𝑪−𝑫
𝑆𝑖𝑛 (𝐴 − 𝐵) = 𝑆𝑖𝑛 𝐴 𝐶𝑜𝑠 𝐵 − 𝐶𝑜𝑠 𝐴 𝑆𝑖𝑛 𝐵 𝑺𝒊𝒏𝑪 − 𝑺𝒊𝒏 𝑫 = 𝟐 𝑪𝒐𝒔 ( ) 𝑺𝒊𝒏 ( )
𝟐 𝟐
𝐶𝑜𝑠 (𝐴 + 𝐵) = 𝐶𝑜𝑠 𝐴 𝐶𝑜𝑠 𝐵 – 𝑆𝑖𝑛 𝐴 𝑆𝑖𝑛 𝐵 𝑪+𝑫 𝑪−𝑫
𝑪𝒐𝒔𝑪 + 𝑪𝒐𝒔 𝑫 = 𝟐 𝑪𝒐𝒔 ( ) 𝑪𝒐𝒔 ( )
𝟐 𝟐
𝐶𝑜𝑠 (𝐴 − 𝐵) = 𝐶𝑜𝑠 𝐴 𝐶𝑜𝑠 𝐵 + 𝑆𝑖𝑛 𝐴 𝑆𝑖𝑛 𝐵
𝑪+𝑫 𝑪−𝑫
𝑪𝒐𝒔𝑪 − 𝑪𝒐𝒔 𝑫 = −𝟐 𝑺𝒊𝒏 ( ) 𝑺𝒊𝒏 ( )
𝟐 𝟐

2 𝑆𝑖𝑛 𝐴 𝐶𝑜𝑠 𝐵 = 𝑆𝑖𝑛 (𝐴 + 𝐵) + 𝑆𝑖𝑛 (𝐴 − 𝐵)


2 𝐶𝑜𝑠 𝐴 𝑆𝑖𝑛 𝐵 = 𝑆𝑖𝑛 (𝐴 + 𝐵) − 𝑆𝑖𝑛 (𝐴 − 𝐵)
𝟏 + 𝒄𝒐𝒔 𝟐𝑨 = 𝟐 𝑪𝒐𝒔𝟐 𝑨
2𝐶𝑜𝑠 𝐴 𝐶𝑜𝑠 𝐵 = 𝐶𝑜𝑠 (𝐴 + 𝐵) + 𝐶𝑜𝑠 (𝐴 − 𝐵)
−2𝐶𝑜𝑠 𝐴 𝐶𝑜𝑠 𝐵 = 𝐶𝑜𝑠 (𝐴 + 𝐵) − 𝐶𝑜𝑠 (𝐴 − 𝐵) 𝟏 − 𝒄𝒐𝒔 𝟐𝑨 = 𝟐 𝑺𝒊𝒏𝟐 𝑨
tan 𝐴+ 𝑡𝑎𝑛𝐵
𝑇𝑎𝑛 (𝐴 + 𝐵) = 1−tan 𝐴 tan 𝐵 𝝅 𝟏 + 𝒕𝒂𝒏 𝑨
𝒕𝒂𝒏 ( + 𝑨) =
𝟒 𝟏 − 𝒕𝒂𝒏 𝑨
tan 𝐴 − 𝑡𝑎𝑛𝐵
𝑇𝑎𝑛 (𝐴 − 𝐵) = 𝝅 𝟏 − 𝒕𝒂𝒏 𝑨
1 + tan 𝐴 tan 𝐵
𝒕𝒂𝒏 ( − 𝑨) =
𝟒 𝟏 + 𝒕𝒂𝒏 𝑨
cot 𝐴 cot 𝐵−1
𝐶𝑜𝑡(𝐴 + 𝐵) = 𝑆𝑖𝑛𝐴 = 2 sin
𝐴
𝑐𝑜𝑠
𝐴
cot 𝐵+ 𝑐𝑜𝑡𝐴
2 2
cot 𝐴 cot 𝐵 + 1 𝑨
𝐶𝑜𝑡(𝐴 − 𝐵) =
cot 𝐵 − 𝑐𝑜𝑡𝐴
𝟏 + 𝒄𝒐𝒔 𝑨 = 𝟐 𝑪𝒐𝒔𝟐
𝟐
Sin 2A = 2 Sin A Cos A 𝑨
𝟏 − 𝒄𝒐𝒔 𝑨 = 𝟐 𝑺𝒊𝒏𝟐
Cos 2A = Cos2A – Sin2A
𝟐
𝐴
Cos 2A = 2Cos2A – 1 2 tan
𝑆𝑖𝑛 𝐴 = 2
Cos 2A = 1 – 2Sin2A 𝐴
1 + 𝑡𝑎𝑛2
2 tan 𝐴
2
𝑇𝑎𝑛 2𝐴 = 1− 𝑡𝑎𝑛2𝐴 𝐴
1 − 𝑡𝑎𝑛2
2 tan 𝐴
𝐶𝑜𝑠 𝐴 = 2
𝑆𝑖𝑛 2𝐴 = 1+ 𝑡𝑎𝑛2 𝐴 𝐴
1 + 𝑡𝑎𝑛2
1 − 𝑡𝑎𝑛2 𝐴 2
𝐶𝑜𝑠 2𝐴 = 𝐴
1 + 𝑡𝑎𝑛2 𝐴 2 tan
𝑇𝑎𝑛 𝐴 = 2
𝑆𝑖𝑛 3𝑥 = 3𝑠𝑖𝑛𝑥 − 4𝑠𝑖𝑛3 𝑥 𝐴
1 − 𝑡𝑎𝑛2
𝐶𝑜𝑠 3𝑥 = 4𝑐𝑜𝑠 3 𝑥 − 3𝑐𝑜𝑠𝑥 2
3𝑡𝑎𝑛𝑥 − 𝑡𝑎𝑛3 𝑥
𝑇𝑎𝑛3𝑥 =
1 − 3𝑡𝑎𝑛2 𝑥
Allied angle property of T -ratios: To find the value of any T Ratio (any angle):
Step - 1 : Write, T Ratio (any angle) = T Ratio (n x 90 ± 𝜃), where 𝜃 is an acute angle
Case (i) : If n is any positive even integer T Ratio (n x 90 + 𝜃) = T Ratio (𝜃).(No change in T Ratio)
Case (ii) : If n is any positive odd integer T Ratio (n x 90 + 𝜃), change the T ratio as " if there is a
"co" remove it and if there is no ''co'' fix it".
Step - 2 : Check the quadrant of the given T ratio and add the corresponding sign to the answer obtained.
1
(Remember A S T C) eg; sin 330° = sin(3 × 90 + 60) = − cos 60 = − 2
Trigonometric equations
Equations involving trigonometric functions of a variables are called trigonometric equations.
Principal and General Solution of Trigonometric Equations
Principal solution: Solutions of trigonometric equation which lie between 𝟎° and 𝟑𝟔𝟎°
General solution: All possible solutions of a trigonometric equation, which involves n, the integer.
𝐬𝐢𝐧 𝜽 = 𝟎 ⟹ 𝜽 = 𝒏𝝅 , 𝒏 ∈ 𝐙
𝝅
𝐜𝐨𝐬 𝜽 = 𝟎 ⟹ 𝜽 = (𝒏 + 𝟏) 𝟐, 𝒏 ∈ 𝐙
𝐭𝐚𝐧 𝜽 = 𝟎 ⟹ 𝜽 = 𝒏𝝅, 𝒏 ∈ 𝐙

General Solution of Trigonometric Equations


(i) If sin θ = sin α for some angle α, then 𝜃 = 𝑛𝜋 + (– 1)𝑛 𝛼 , n ∈ Z
(ii) If cos θ = cos α for some angle α, then θ = 2 nπ ± α, n ∈ Z
(iii) If tan θ = tan α or cot θ = cot α, then θ = nπ + α, n ∈ Z
(iv) The general value of θ satisfying any of the equations 𝑠𝑖𝑛2 𝜃 = 𝑠𝑖𝑛2 𝛼, 𝑐𝑜𝑠 2 𝜃 = 𝑐𝑜𝑠 2 𝛼
and 𝑡𝑎𝑛2 𝜃 = 𝑡𝑎𝑛2 𝛼 is given by θ = nπ ± α, n ∈ Z

You might also like