6/6/23, 11:44 AM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Home /  I'm Learning /  India_Internship_Sri SaiRam Engineering College_Introduction to Packet Trac /  Packet Tracer Basics Quiz
/  Introduction to Packet Tracer - PT Basics Quiz


Course India_Internship_Sri SaiRam Engineering College_Introduction to Packet
Home
Trac

Grades
Started on Tuesday, 6 June 2023, 11:43 AM
State Finished
 Completed on Tuesday, 6 June 2023, 11:44 AM
Messages Time taken 50 secs
Marks 8.00/28.00

 Grade 28.57 out of 100.00

Calendar
Question 1

Incorrect

Mark 0.00 out of 2.00

Send a simple PDU from the new PC to the server.

True or False?
The ping will work on the newly added PC as soon as the link lights turn green.

Select one:
true 

false

Refer to curriculum topic: 3.1.1

The wireless router is providing the IP addresses via DHCP. The PC must be configured with DHCP before communications to the server will work.
The correct answer is: false

Question 2

Incorrect

Mark 0.00 out of 2.00

Switch to simulation mode. Select Laptop0/Desktop/HTTP, enter a URL of www.cisco.com and click GO. What is the value of the Destination Port
number on the outbound DNS packet that was created?

Select one:
1025

800 

57

53

Refer to curriculum topic: 3.1.1

The correct answer is: 53

By continuing to use our website, you acknowledge the use of cookies.

Privacy Statement Change Settings

https://lms.netacad.com/mod/quiz/review.php?attempt=55447522&cmid=74169472 1/9
6/6/23, 11:44 AM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 3

Complete

Not graded

Add a PC and connect it to the wireless router with a straight-through cable. What icon should be selected to find the required cable?

Select one:

Refer to curriculum topic: 2.1.1

The correct answer is:

Question 4

Incorrect

Mark 0.00 out of 2.00

Refer to the exhibit. The above icon is in the lower right hand corner of the Packet Tracer screen. What might the person using Packet Tracer be
doing?

Select one:
adding a city view as a background

testing connectivity by using simple or complex PDUs

creating a new network

deleting components from an existing network 

By continuing to use our website, you acknowledge the use of cookies.

Refer to curriculum topic: 2.1.1
The two
Privacy Statement modesSettings
Change available in Packet Tracer are realtime mode and simulation mode. Simulation mode allows for the creation and capture of PDUs
on the network.
The correct answer is: testing connectivity by using simple or complex PDUs

https://lms.netacad.com/mod/quiz/review.php?attempt=55447522&cmid=74169472 2/9
6/6/23, 11:44 AM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 5

Incorrect

Mark 0.00 out of 2.00

Refer to the exhibit. How do you display the popup window to show the additional device information?

Select one:
Choose File > device info popup

Hover the cursor over the device icon.

Right-click the device to select detailed information. 

Double-click the device icon.

Refer to curriculum topic: 2.1.1

By hovering over a Packet Tracer device, information such as interface status and IP address displays.
The correct answer is: Hover the cursor over the device icon.

Question 6

Correct

Mark 2.00 out of 2.00

Refer to the exhibit. What description matches the function of the Packet Tracer devices shown?

Select one:
security devices

IoT devices 

networking devices

cabling components

Refer to curriculum topic: 2.1.1

The correct answer is: IoT devices

By continuing to use our website, you acknowledge the use of cookies.

Privacy Statement Change Settings

https://lms.netacad.com/mod/quiz/review.php?attempt=55447522&cmid=74169472 3/9
6/6/23, 11:44 AM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 7

Correct

Mark 2.00 out of 2.00

Where in Packet Tracer can you create a new building or wiring closet?

Select one:
virtual workspace

logical workspace

simulation workspace

physical workspace 

Refer to curriculum topic: 4.1.1

The correct answer is: physical workspace

Question 8

Incorrect

Mark 0.00 out of 2.00

Refer to the exhibit. Match each numbered Packet Tracer menu icon with a description. (Not all options are used.)

icon 4 Choose...

icon 3 Investigate device tables. 

icon 2 Add a PC to the network. 

icon 5 Choose...

icon 1 Add a PC to the network. 

icon 6 Choose...

Refer to curriculum topic: 3.1.1

The correct answer is: icon 4 → Investigate device tables., icon 3 → Enter simulation mode., icon 2 → Delete a component., icon 5 → Add a note.,
icon 1 → Create a complex PDU., icon 6 → Select a city view as a background.

By continuing to use our website, you acknowledge the use of cookies.

Privacy Statement Change Settings

https://lms.netacad.com/mod/quiz/review.php?attempt=55447522&cmid=74169472 4/9
6/6/23, 11:44 AM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 9

Incorrect

Mark 0.00 out of 2.00

A technician needs to add a home wireless router. Which icon should the technician select?

Select one:

Refer to curriculum topic: 2.1.1

The network devices icon in the bottom left corner of the Cisco Packet Tracer window allows a router, switch, hub, wireless device, security, or WAN
emulation to be added to the logical workspace.

The correct answer is:

Question 10

Incorrect

Mark 0.00 out of 2.00

Refer to the exhibit. What does the shaded area represent?

Select one:
It defines the wireless signal coverage.

It is just a background image.

It is used as a temporary location to add devices that will be moved into the building.

It defines an area where you cannot add any new buildings. 

Refer to curriculum topic: 4.1.1

Packet Tracer has two views: (1) the logical view which is the default view and used for creating the network and (2) the physical view which allows
you to see wiring closets, a room or building layout, or wireless coverage for a specific wireless router.
The correct answer is: It defines the wireless signal coverage.

By continuing to use our website, you acknowledge the use of cookies.

Privacy Statement Change Settings

https://lms.netacad.com/mod/quiz/review.php?attempt=55447522&cmid=74169472 5/9
6/6/23, 11:44 AM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 11

Incorrect

Mark 0.00 out of 2.00

Refer to the exhibit. How do you display the interface number where the cable is attached to a device?

Select one:
The labels must always be manually entered. 

On the config tab of the device, choose show interface number.

Enter the no shutdown command in interface configuration mode.

Hover the mouse cursor over the cable.

Refer to curriculum topic: 2.1.1

When working within Packet Tracer, hover the mouse cursor over the cable close to where it connects to a device to see the specific interface
number. Hover over the device to see interface information such as IP address and link status.
The correct answer is: Hover the mouse cursor over the cable.

Question 12

Correct

Mark 2.00 out of 2.00

Using the Packet Tracer network, add and associate a laptop as a device on the wireless router. Use HTTP to connect to www.cisco.com. What is the
special message?

Select one:
You made it!

Your wireless configuration works.

Way to go! 

Awesome!

Packet Tracer is cool!

Refer to curriculum topic: 2.1.1

The correct answer is: Way to go!

By continuing to use our website, you acknowledge the use of cookies.

Privacy Statement Change Settings

https://lms.netacad.com/mod/quiz/review.php?attempt=55447522&cmid=74169472 6/9
6/6/23, 11:44 AM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 13

Correct

Mark 2.00 out of 2.00

A technician selected the GUI interface on a wireless router and added a DNS address of 208.67.220.220. The technician then immediately exited the
GUI interface. What will occur as a result of this configuration?

Select one:
All connected host devices, configured with DHCP, will automatically be sent the IP address of the DNS server.

Because the technician forgot to save the configuration, the DNS server address will not be sent to connected devices. 

The technician should have used the Config tab to enter the DNS address.

The technician should check the Physical tab to ensure that the wireless router is powered on.

Refer to curriculum topic: 2.1.1

When working with a wireless device within the Packet Tracer GUI environment, scroll to the bottom and select the Save Settings option for each
menu item.
The correct answer is: Because the technician forgot to save the configuration, the DNS server address will not be sent to connected devices.

Question 14

Incorrect

Mark 0.00 out of 2.00

Which icon is the default icon for a .pka file?

Select one:

Refer to curriculum topic: 4.2.1

By continuing to use our website, you acknowledge the use of cookies.

The correct answer is:
Privacy Statement Change Settings

https://lms.netacad.com/mod/quiz/review.php?attempt=55447522&cmid=74169472 7/9
6/6/23, 11:44 AM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 15

Incorrect

Mark 0.00 out of 2.00

A PC and two laptops need to be added to a wireless router on the Packet Tracer network. What icon would provide the correct components?

Select one:


Refer to curriculum topic: 2.1.1

The correct answer is:

◄ Read Chapter 4: Packet Tracer Usage

Jump to...

Read Chapter 5: IoT Components in Packet Tracer ►

NetAcad, a Cisco Corporate Social Responsibility program, is an IT skills and career building program available to learning institutions and individuals worldwide.

Terms and Conditions

Privacy Statement

Cookie Policy

Data Protection

By continuing to use our website, you acknowledge the use of cookies. Trademarks

Privacy Statement Change Settings Data Protection

Accessibility

https://lms.netacad.com/mod/quiz/review.php?attempt=55447522&cmid=74169472 8/9
6/6/23, 11:44 AM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

By continuing to use our website, you acknowledge the use of cookies.

Privacy Statement Change Settings

https://lms.netacad.com/mod/quiz/review.php?attempt=55447522&cmid=74169472 9/9