27' 5"

Dimensions 18' 4"

(5600)
(8350)
9'
(2750)

11' 6"
(3620)

15' 8"
(4770)
23' 7"
(7200)
9'
(2750)

36' 5"
(10 650)
28' 3" 30' 0"
(9070) (8930)
38' 9" 19' 5" 20' 8"
(11 570) (5420) (8120)
12' 7"
31' 6" (4070)
(10 150)
17' 5" 10'
(5300) (3050)
27' 5"
(8350)

Note: With addition of auxiliary hoist, tailswing increases to 14’ 2” (4320 mm)

42' 8"
(13 010)
36' 9"
(11 200) 6' 10" 5' 1"
(2080) (1540)

4' 8"
(1413)

12' 5"
+6-1/2" 12' 5"
-5" (3782)
(3778)
5' 11"
(1807)
20°
21°

6"
(150) 8-11/16"
7' 2" 5' 9" 4' 1" 5' 5" 7' 10-1/2" 5' 5" 4' 7" (220)
(2190) (1750) (1250) (1650) (2400) (1650) (1400)
27' 5"
(8350)
35' 4"
(10 775)
43' 3"
(13 185)

Note: ( ) Reference dimensions in mm

MODEL GMK 4100 EQUIPPED WITH: FRONT REAR GVW

8 x 6 x 8, Tires 20.5R25, 9,260 lbs. (4200 kg) 2 AXLE LINES 2 AXLE LINES
counterweight 51,920 lbs. 50,915 lbs. 102,835 lbs.

ADDITIONS:
Outrigger Floats 159 lbs. 172 lbs. 331 lbs.
Auxiliary Hoist -2,147 lbs. 4,837 lbs 2,690 lbs.
16.00R25 Tires in lieu of 20.5R25 -370 lbs. -370 lbs. -740 lbs.
14.00R25 Tires in lieu of 20.5R25 -900 lbs. -900 lbs. -1,800 lbs.
Spare Tire & Wheel - 14.00R25 & Bracket -416 lbs. 1,000 lbs. 584 lbs.
Spare Tire & Wheel - 16.00R25 & Bracket -516 lbs. 1,232 lbs. 716 lbs.
Spare Tire & Wheel - 20.5R25 & Bracket -589 lbs. 1,398 lbs. 809 lbs.
26' - 43' Lattice Extension w/Brackets 3,382 lbs. -1,067 lbs. 2,315 lbs.
8 x 8 Drive 212 lbs. 824 lbs. 1,036 lbs.

REMOVAL:
9,260 lbs. Counterweight 5,315 lbs. -14,575 lbs. -9,260 lbs.
2 X Front Outriggers (Beams & Jacks) -4,167 lbs. 1,411 lbs. -2,756 lbs.
2 X Rear Outriggers (Beams & Jacks) 1,940 lbs. -5,467 lbs. -3,527 lbs.

Weights may vary due to manufacturing tolerances and scale accuracy.

2 GMK4100
 Working range

37 -141 ft. 26 - 43 - 62 - 82 ft. 34,850 lbs. 360°

(11.2 - 43.0 m) (8.0 - 13.0 - 19.0 - 25.0 m) (15 800 kg)

FEET
240
16° 0°
30°
230
141' + 82'
220

210
141' + 62'

200

190
141' + 43'

180

170
141' + 26'
160

150 70°

140 60°
141'

130
50°

120

110 115'
40°

100

90
30° 90'
80

70
20°
60 62'

50

40 10°

30 37'

20
0°
10

0
160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 FEET
AXIS OF ROTATION

DIMENSIONS ARE FOR LARGEST

GROVE FURNISHED HOOK BLOCK AND
7'-0" 9'-7" HEADACHE BALL, WITH ANTI-TWO
BLOCK ACTIVATED.

3 GMK4100
 Superstructure specifications

Boom Hydraulic System

37 ft. to 141 ft. (11.2 m to 43 m) five-section full power Three separate pump circuits: two axial piston pumps
boom. with integrated infinitely variable speed and load
Maximum tip height: 150 ft. (46 m). control and two fixed displacement pumps for swing.

Lattice Extension 349 gallon (1320 L) reservoir capacity.

Two-stage, 26 ft. to 43 ft. (8 m to 13 m) lattice extension
offsettable at 0°, 16° and 30°. Stows alongside base All crane movements infinitely variable by hydraulic
boom section. pilot circuit control levers with automatic reset to zero.
Maximum tip height: 194 ft. (59 m).
Electrical System
*Optional Lattice Extension 24 V lighting system and signals.
Boom extension, lattice design 26, 43, 62, 82 ft. (8, 13, Generator: 28 V/55 A.
19, 25 m) - includes 26 ft. to 43 ft. (8 m to 13 m) swing- Two batteries: 12 V/170 Ah each.
away (offsets 0°, 16° and 30°) plus 20 ft. (6 m) lattice
extensions.
Maximum tip height: 230 ft. (70 m). HOIST SPECIFICATIONS
Main Hoist
Boom Elevation Axial piston fixed displacement motor with
Single cylinder with integral holding valve provides integrated planetary gear and multiple disk brake.
elevation from -3° to 84°. Rope drum with special grooving.

Load Moment Single line pull: 13,700 lbs.

& Anti-Two Block System (61 kN)
Load moment and anti-two block system with
audio-visual warning and control lever lock-out. Single line speed: 400 FPM
These systems provide electronic display of boom (120 m/min)
angle, length, radius, tip height, relative load moment,
maximum permissible load, load indication and Rope diameter: 19 mm
warning of impending two-block condition.
Rope length: 788 ft.
Cab (240 m)
Full vision aluminum cab, safety glass windows,
adjustable operator’s seat with hydraulic suspension, Auxiliary Hoist
engine-independent heating, instrumentation and Axial piston variable displacement motor with
operating controls for superstructure. integrated planetary gear and multiple disk brake.
Rope drum with special grooving.
Swing
Axial piston motor with planetary gear. Holding and Single line pull: 13,700 lbs.
service brake. Swing speed variable from 0 - 1.9 RPM. (61 kN)

Counterweight Single line speed: 400 FPM

34,850 lbs. (15 800 kg) total. Hydraulically installed and (120 m/min)
removed.
Rope diameter: 19 mm
Engine
Mercedes-Benz OM366A, diesel, 6 cylinders, water Rope length: 590 ft.
cooled, turbocharged, 104 kW at 1800 RPM. (180 m)
Maximum torque: 566 Nm at 1500-1600 RPM.

4 GMK4100
 Carrier specifications
Chassis Steering
Four-axle, all-welded, torsion-resistant, box-type Dual-circuit. Automatic switch-in of standby steering
construction of high strength steel. pump in case of main pump failure.

Outriggers Brakes
Four hydraulically telescoping beam outriggers with Service brake: pneumatic dual circuit acting on all
vertical cylinders and outrigger pads. Independent wheels. Air dr yer.
horizontal and vertical movement control on each Auxiliary brake: hydraulic retarder integrated with
side of chassis. Crane level indicators at each automatic transmission.
control station.
Parking brake: pneumatically operated spring-loaded
Engine brake acting on 2nd and 4th axle line.
Daimler Benz OM 442 A diesel, 8 cylinders,
water-cooled with turbocharger, 335 hp (250 kW) @ Cab
2100 RPM. Aluminum, two-man design, safety glass, driver's seat
Maximum torque: 1500 Nm at 1200 RPM. with hydraulic suspension, engine hot water heater.
Complete instrumentation and driving controls. Cab
Fuel Tank Capacity can be tilted forward by 60° for easy access to
127 gallons (500 L). engine, transmission, hydraulic pumps, heater and
batteries.
Transmission
Automatic powershift transmission with 5 forward Electrical System
and 1 reverse gears.Two speed transfer case with 24 V lighting system and signals.
longitudinal differential lock. Generator: 28 V/55 A.
Two batteries: 12 V/170 Ah each.
Drive
8x 6x 8 Maximum Speed
47 mph (75 kph)
Axles
1st axle line - drive/steer. Gradeability (Theoretical)
2nd axle line - drive/steer. 60%
3rd axle line - steer (off road only).
4th axle line - drive/steer. Miscellaneous Standard Equipment
Hydraulic oil cooler; spare tire and wheel - 20.5R25
Drive axles with planetary hub reduction and center with carry bracket; spare parts/service manuals; hoist
mounted gearing. drum rotation indicators; flashing amber warning
light on carrier cab; working light; tool kit, wheel
Suspension chocks, fire extinguisher; rooster sheave; radio/
Exclusive "MEGATRAK™" independent cassette in carrier cab.
hydropneumatic suspension and hydraulic axle
lock-out. Dual level control. Suspension range: +6.7 *Optional Equipment
in. (170 mm) to -5.0 in. (-130 mm). Possible * 8 x 8 x 8 drive
combination for transverse slope. * Hook blocks and headache balls
* Motor-independent heating with engine preheater.
Tires
8 - 20.5R25 radials.
*Denotes optional equipment.

GMK4100 5
 37 - 141 ft. 34,850 lbs. 100% 360°
(11.2 - 43 m) (15 800 kg)

Pounds

(Feet) 37* 37 63 63 75 89 89 101 115 115 128 141

**200,000 LBS. only with special equipment

T1 T2 T3 T4 %

All main boom charts available with 50% outriggers.

THISCHART ISONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

6 GMK4100
 37 - 141 ft. 22,000 lbs. 100% 360°
(11.2 - 43 m) (10 000 kg)

Pounds

(Feet) 37* 37 63 63 75 89 89 101 115 115 128 141

T1 T2 T3 T4 %

All main boom charts available with 50% outriggers.

THISCHART ISONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

GMK4100 7
 37 - 141 ft. 9,300 lbs. 100% 360°
(11.2 - 43 m) (4200 kg)

Pounds

(Feet) 37 63 63 75 89 89 101 115 115 128 141

T1 T2 T3 T4 %

All main boom charts available with 50% outriggers.

37 - 141 ft. 0 lbs. 100% 360°

(11.2 - 43 m) (0 kg)

Pounds

(Feet) 37 63 63 75 89 89 101 115 115 128 141

T1 T2 T3 T4 %

All main boom charts available with 50% outriggers.

THISCHART ISONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

8 GMK4100
 141 ft. 26 - 43 - 62 - 82 ft. 34,850 lbs. 100% 360°
(43 m) (8 - 13 - 19 - 25 m) (15 800 kg)

Pounds

26 FEET 43 FEET 63 FEET 82 FEET

(Feet) 0° 16° 30° 0° 16° 30° 0° 16° 30° 0° 16° 30°

T1 T2 T3 T4 %

THISCHART ISONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

GMK4100 9
 141 ft. 26 - 43 - 62 - 82 ft. 22,000 lbs. 100% 360°
(43 m) (8 - 13 - 19 - 25 m) (10 000 kg)

Pounds

26 FEET 43 FEET 63 FEET 82 FEET

(Feet) 0° 16° 30° 0° 16° 30° 0° 16° 30° 0° 16° 30°

T1 T2 T3 T4 %

THISCHART ISONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

10 GMK4100
 141 ft. 26 - 43 ft. 9,000 lbs. 100% 360°
(43 m) (8 - 13 m) (4200 kg)

Pounds

26 FEET 43 FEET

(Feet) 0° 16° 30° 0° 16° 30°

T1 T2 T3 T4 %

THISCHART ISONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

GMK4100 11
 82' Boom Extension

BI-FOLD SWINGAWAY

BASE SECTION TIP SECTION

20' 4' 22' 17'

Length (ft.) (6 m) (1.4 m) (6.6 m) (5 m)

26' _______ 1X 1X _______

43' _______ 1X 1X 1X

62' 1X 1X 1X 1X

82' 2X 1X 1X 1X

12 GMK4100
Rated lifting capacities

Impor tan t Notes:

War n in g: THIS CHART IS ONLY A GUIDE.

Th e n otes below ar e for illustr ation on ly an d
sh ould n ot be r elied upon to oper ate th e cr an e.
Th e in dividual cr an e's load ch ar t, oper atin g
in str uction s an d oth er in str uction plates must be
r ead an d un der stood pr ior to oper atin g th e cr an e.

1. All rated loads have been tested to and meet

minimum requirements of SAEJ1063 NOV93 -
Cantilevered Boom Crane Structures - Method of Test,
and do not exceed 85% of the tipping load on
outriggers as determined by SAEJ765 OCT90 Crane
Stability Test Code.

2. Capacities given do not include the weight of hook

blocks, slings, auxiliary lifting equipment and load
handling devices.Their weights must be added to the
load to be lifted.When more than minimum required
reeving is used, the additional rope weight shall be
considered part of the load.

3.Tipping should never be relied upon as a capacity

limitation.

4. All capacities are for crane on firm, level surface. It

may be necessary to have structural supports under the
outrigger f loats or tires to spread the load to a larger
bearing surface.

5.When either boom length or radius or both are

between values listed, the smallest load shown at either
the next larger radius or boom length shall be used.

6. For outrigger operation,ALL outriggers shall be

properly extended with tires raised free of ground
before raising the boom or lifting loads.

GMK4100
Grove Worldwide – World Headquarters Grove France S.A.
Grove North America 16, chaussée Jules-César, 95520 OSNY
1565 Buchanan Trail East B.P. 203, 95523 CERGYPONTOISECEDEX
P.O. Box 21 France
Shady Grove, Pennsylvania 17256, U.S.A. Tel: [ Int + 33] (1) 30313150
Tel: [ Int + 1] (717) 597-8121 Int: [ Int + 33] (1) 30386085
Fax: [ Int + 1] (717) 597-4062
Western Hemisphere, Asia/Pacific Grove Asia/Pacific - Regional Office
171 Chin Swee Road
Grove Europe Limited* #06-01 San Centre
Sunderland SR4 6TT, England Singapore 0316
Tel: [ Int + 44] 191 565-6281 Tel: [ Int + 65] 536-6112
Fax: [ Int + 44] 191 564-0442 Fax: [ Int + 65] 536-6119
Europe, Africa, Middle East Asia/Pacific, Near East

Grove Europe Limited* Grove China - Representative Office

P.O. Box No. 268 Beijing Hotel Room 6074
4AKimber Road No. 33 East Chang An Avenue
Abingdon, Oxfordshire, 0X141SG Beijing, 100004, China
Tel: [ Int + 44] 1235 55-3184 Tel: [ Int + 86] (10) 513-7766
Fax: [ Int + 44] 1235 55-3218 Fax: [ Int + 86] (10) 513-7307
*Grove Europe Limited, Registered in England,
Number 1845128, Registered office, Crown Works, Grove Product Support
Pallion, Sunderland, Tyne & Wear, England SR4 6TT Western Hemisphere, Asia/Pacific
1086 Wayne Avenue
Deutsche Grove GmbH Chambersburg, Pennsylvania USA
Sales and Service Tel: [ Int + 1] (717) 263-5100
Helmholtzstrasse 12, Postfach 5026 Fax: [ Int + 1] (717) 267-0404
D-40750 Langenfeld, Germany
Tel: [ Int + 49] (2173) 8909-0 Europe, Africa, Middle East
Fax: [ Int + 49] (2173) 8909-30 Sunderland SR4 6TT, England
Tel: [ Int + 44] 191 565-6281
Wilhelmshaven Works Parts Fax: [ Int + 44] 191 510-9242
Industriegelande West, Postfach 1853 Service Fax: [ Int + 44] 191 510-9560
D-26358 Wilhelmshaven, Germany
Tel: [ Int + 49] (4421) 294-0
Fax: [ Int + 49] (4421) 294-301 http://www.groveworldwide.com

Constant improvement and engineering progress make it necessary that we reserve the right to make
specification, equipment, and price changes without notice. Illustrations shown may include optional
equipment and accessories and may not include all standard equipment.

Distributed By:

Form No.: SBGMK4100 Part No.: 3-961 797-12M Printed in U.S.A.