Scribd
Upload
375 views2 pages

Padrão Flanges SAE

The document provides information on identifying mounting flanges and shafts for pumps and motors according to common standards. It lists dimensions for two-bolt and four-bolt mounting flanges based on SAE and ISO standards, including pilot diameter, mounting distance, and bolt hole diameter. It also lists dimensions for straight keyed shafts without threads. The standards help determine what type of flange or shaft a particular pump or motor has.

Uploaded by

Rodrigo Reolon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
375 views2 pages

Padrão Flanges SAE

The document provides information on identifying mounting flanges and shafts for pumps and motors according to common standards. It lists dimensions for two-bolt and four-bolt mounting flanges based on SAE and ISO standards, including pilot diameter, mounting distance, and bolt hole diameter. It also lists dimensions for straight keyed shafts without threads. The standards help determine what type of flange or shaft a particular pump or motor has.

Uploaded by

Rodrigo Reolon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MOUNTING FLANGES AND SHAFTS OF PUMPS AND MOTORS

l Dzyanis } October 10, 2019 v 0 m Blogs motor, pump

Just to determine what flange and shaft of pump or motor you have, please see below excerpts from the next standards:
SAE J744. “Hydraulic Pump and Motor Mounting and Drive Dimensions”.
ISO 3019-1. “Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors”.

Two bolts mounting flange

Two bolts mounting

Standard Code (P) Pilot Diameter (K) Mounting Distance (D) Bolt Hole Diameter

SAE AA 2.00″ 3.25″ 0.406″


ISO 50-2 50.8 mm 82.6 mm 10.3 mm

SAE A 3.25″ 4.187″ 0.437″


ISO 82-2 82.55 mm 106.4 mm 11.1 mm

SAE B 4.00″ 5.75″ 0.562″


ISO 101-2 101.6 mm 146 mm 14.3 mm

SAE C 5.00″ 7.125″ 0.687″


ISO 127-2 127 mm 181 mm 17.5 mm

SAE D 6.00″ 9.00″ 0.812″


ISO 152-2 152.4 mm 228.6 mm 20.6 mm

SAE E 6.50″ 12.50″ 1.062″


ISO 165-2 165.1 mm 317.5 mm 27 mm

SAE F 7.00″ 13.781″ 1.062″


ISO 177-2 177.8 mm 350 mm 27 mm
Four bolts mounting flange

Four bolt mounting

Standard Code (P) Pilot Diameter (K) Mounting Diameter (S) Mounting Distance (D) Bolt Hole Diameter

SAE B 4.00″ 5.00″ n/a 0.562″


ISO 101-4 101.6 mm n/a 89.8 mm 14.3 mm

SAE C 5.00″ 6.375″ n/a 0.562″


ISO 127-4 127 mm n/a 114.5 mm 14.3 mm

SAE D 6.00″ 9.00″ n/a 0.812″


ISO 152-4 152.4 mm n/a 161.6 mm 20.6 mm

SAE E 6.50″ 12.50″ n/a 0.812″


ISO 165-4 165.1 mm n/a 224.5 20.6 mm

SAE F 7.00″ 13.781″ n/a 1.062″


ISO 177-4 177.8 mm n/a 247.5 27 mm

Straight (cylindrical) keyed shafts without thread

You might also like