Scribd
Upload
809 views

Fanuc Initialize Parameter

The document contains axis parameter settings for the X and Z axes of an FANUC machine, including initial set bits, motor ID number, gear settings like feed gear "N" and "M", direction settings, velocity pulse number, position pulse number, and reference counter settings for each axis.

Uploaded by

S.Dharanipathy
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
809 views

Fanuc Initialize Parameter

The document contains axis parameter settings for the X and Z axes of an FANUC machine, including initial set bits, motor ID number, gear settings like feed gear "N" and "M", direction settings, velocity pulse number, position pulse number, and reference counter settings for each axis.

Uploaded by

S.Dharanipathy
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

FANUC INITIALIZE PARAMETER – SV PM

AXIS PARAMETER SETTING

PRM SYSTEM SV_PRM SV_SET

X AXIS Z AXIS
INITIAL SET BITS 00001010 00001010
MOTOR ID NO 156 156
AMR 00000000 00000000
CMR 2 2
FEED GEAR “N” 1 1
“M” C 160 C 160
H/C 160 H/C 160
F 150 F 100
DIRECTION C -111 C -111
H/C -111 H/C 111
F 111 F -111
VELOCITY PULSE NO 8192 8192
POSITION PULSE NO 12500 12500
REFERENCE COUNTER C 3125 C 6250
H/C 3125 H/C 6250
F 10000 F 10000

C- CHUCKER F- FLEXTURN H/C – HIGH COST

You might also like