Diseñado por el

Versatile Configuration Templa

Plantilla de Configuracion para
Version Minima d
Configure Data Campo de Administracion y Modificaion del Archivo
Asignar Vlan ID
Requiere DHCP
Interface GigabitEthernet 0/0 ID o Numero de autenticacion
no firewall enable IP Vlan Data
no shutdown IP Vlan Voice
exit Ruta para broadwork!!
Medio de Transmision
Interface GigabitEthernet 1/1
switchport mode trunk Agregara Voice Vlan al Switch
switchport trunk allowed vlan add 20
exit Nota: Si el Switch no lleva Segmentacion de Vlan Utlizar el Puerto
G1/4 del AudioCode para conectarse al Switch
Interface GigabitEthernet 1/2
switchport mode trunk
switchport trunk allowed vlan add 20
exit

Interface GigabitEthernet 1/3

switchport mode access
switchport access vlan 20
exit

Interface GigabitEthernet 1/4

switchport mode access
switchport access vlan 20
no shutdown
exit

Interface VLAN 1
no ip address
no service DHCP
exit

Interface Vlan 20
ip address 192.168.10.1 255.255.255.0
no service dhcp
no napt
no firewall enable
no shutdown
mtu auto
desc "LAN"
no ipv6 enable
ip dns server static
exit

Interface atm 0/2

encapsulation pppoa-mux
ppp user cv-8092201212 pass 8092201212
pvc 0/100
no firewall enable
napt
ip name-server 192.168.10.1

ip dns server static

ip name-server 0.0.0.0
exit

ip route 10.97.50.0 255.255.255.0 ATM 0/2

ip route 10.97.51.0 255.255.255.0 ATM 0/2
ip route 10.25.33.240 255.255.255.240 ATM 0/2

interface dsl 0/2

no shut
no shutdown
exit

ip host xsp2.claroip.net.do 10.97.50.42 0

ip host ntp.server 10.97.50.39 0
ip host outbound.proxy 192.168.10.2 0

exit

Configure Network

network-dev 0
vlan-id 20
name " VLAN20 "
activate
exit

interface network-if 0
ip-address 192.168.10.2
gateway 192.168.10.1
primary-dns 192.168.10.1
activate
exit
exit

configure voip
no realm 0

realm 0
name "MR-LAN"
ipv4if "Voice"
port-range-start 6000
session-leg 100
is-default enable
activate
exit

realm 1
name "MR-WAN"
ipv4if "WAN"
port-range-start 7000
session-leg 100
activate

exit
exit
write
 Diseñado por el Ing. Juan Nolasco.

e Configuration Template For HPBX Solutions (VECTHS)

de Configuracion para Dispositivos de Soluciones HPBX
Version Minima del AudioCode F7.20A
y Modificaion del Archivo
20
NO
8092201212
192.168.10.1
192.168.10.2

Cobre Atm 0/2

No Config. Apply For Switchs Cisco SG300-28 y SG de 8 Port

ntacion de Vlan Utlizar el Puerto

ra conectarse al Switch
-
-
configure voip
srd 0
name "SRD-LAN"
sbc-routing-policy-name "Default_SBCRoutingPolicy"
activate
exit
srd 1
name "SRD-WAN"
sbc-routing-policy-name "Default_SBCRoutingPolicy"
activate
exit
sip-interface 0
interface-name "SIP-LAN"
network-interface "Voice"
application-type sbc
tcp-port 0
tls-port 0
srd-name "SRD-LAN"
media-realm-name "MR-LAN"
activate
exit
sip-interface 1
interface-name "SIP-WAN"
network-interface "WAN"
application-type sbc
udp-port 5070
tcp-port 0
tls-port 0
srd-name "SRD-WAN"
media-realm-name "MR-WAN"
activate
exit
sip-interface 2
interface-name "SIP-GW"
network-interface "Voice"
udp-port 5080
tcp-port 0
tls-port 0
srd-name "SRD-LAN"
 media-realm-name "MR-LAN"
activate
exit
proxy-set 0
proxy-name "ProxySet_0"
srd-name "SRD-LAN"
gwipv4-sip-int-name "SIP-GW"
sbcipv4-sip-int-name "SIP-LAN"
activate
exit
proxy-set 1
proxy-name "claroip.net.do"
proxy-enable-keep-alive using-options
srd-name "SRD-WAN"
proxy-redundancy-mode homing
sbcipv4-sip-int-name "SIP-WAN"
activate
exit
proxy-ip 0/0
proxy-address 192.168.10.2
transport-type udp
activate
exit
proxy-ip 1/0
proxy-address "10.97.50.60:5060"
transport-type udp
activate
exit
proxy-ip 1/1
proxy-address "10.97.51.60:5060"
transport-type udp
activate
exit
ip-group 1
srd-name "SRD-LAN"
media-realm-name "MR-LAN"
classify-by-proxy-set disable
dtls-context ""
activate
exit
ip-group 2
proxy-set-name "claroip.net.do"
srd-name "SRD-WAN"
media-realm-name "MR-WAN"
activate
exit
ip-group 3
proxy-set-name "ProxySet_0"
srd-name "SRD-LAN"
media-realm-name "MR-LAN"
classify-by-proxy-set disable
activate
exit
sbc settings
crp-gw-fallback on
sbc-direct-media on
sbc-broadworks-survivability on
activate
exit
sbc classification 0
classification-name "CT-LAN"
srd-name "SRD-LAN"
src-sip-interface-name "SIP-LAN"
src-ip-group-name "CRP Users"
activate
exit
sbc classification 1
classification-name "CT-WAN"
srd-name "SRD-WAN"
src-sip-interface-name "SIP-WAN"
src-ip-group-name "CRP Proxy"
activate
exit
exit
 Versatile Configuration Template For CLARO Services (VECTCS

Configure Terminal

banner motd $

======================================================================

ccccccccc lll a rrrrrrr 0000000

ccc ccc lll aa rrr rrr 000 000
ccc lll aa a rrr rrr 000 000
ccc lll aaa aa rrr rrr 000 000
ccc lll aaaaaaaa rrrrrrr 000 000
ccc ccc llllllll aaa aaa rrr rrr 000 000
ccccccccc llllllll aaa aaa rrr rrr 0000000

***********************************************************************
SERVICIO DE CONECTIVIDAD CLARO 809-220-1212
***********************************************************************
CONFIGURADO POR EL ING.NOLASCO
***********************************************************************
* !!ADVERTENCIA!! *
* *
* Este Equipo y sus recursos son Administrados por CLARO y su gestion *
* es exclusivo del personal autorizado por esta entidad. El acceso *
* indebido puede conllevar acciones disciplinarias y/o legales. Toda *
* actividad o acceso establecido en este dispositivo puede estar *
* constantemente monitoreado y registrado en un servidor Logs. *
* *
* !!WARNING!! *
* *
* This equipment and its resources are managed by CLARO and its *
* management is exclusive of personnel authorized by this entity. *
* Improper access to this device may lead to disciplinary and/or *
* legal actions.All activity or access established in this device can *
* be constantly monitored and registered in a Logs server. *
***********************************************************************

no ip domain lookup
service password-encryption
no cdp run
hostname AutoSama
enable secret anwan

interface ATM0
no shut

interface ATM0.100 point-to-point

pvc 0/100
encapsulation aal5mux ppp dialer
dialer pool-member 1

interface Vlan1
ip address 192.168.10.11 255.255.255.0
no shutdown

interface Dialer1
mtu 1488
ip address negotiated
encapsulation ppp
dialer pool 1
ppp pap sent-username cv-8095445555 password 8095445555
hold-queue 224 in

ip route 0.0.0.0 0.0.0.0 Dialer1

line con 0
password cisco
logging synchronous
login

line vty 0 4
password cisco
logging synchronous
login
transport input all
end
wr
For CLARO Services (VECTCS)
Tabla de Gestion y Modificacion de las configuraciones
Configurado Por: ING.NOLASCO
Circuito o ID Asignado: 8095445555
Direccion IP LAN: 192.168.10.11
Password por Telnet: cisco
Password por Consola: cisco
Password Enable Secret: anwan
Hostname: AutoSama
Tipo de servicio: CONECTIVIDAD