COMPLETE VEHICLE

EU CERTIFICATE OF CONFORMITY
The undersigned, Mr. Wu Qiang/ Manager General construction characteristics
Hereby certifies that the following vehicle:
1.3. Number of axles: 2 and wheels: 2
0.1. Make (trade name of the manufacturer): Rooder 1.3.1. Axles with twinned wheels : N.A
1.3.2. Powered axles: R
0.2. Type: CP-1 (CV * Type): N.A. 6.2.4. Advanced braking system: ABS / CBS / Both ABS and CBS / None: None

0.2.1. Variant: 00 (CV * Version): N.A. Main dimensions

0.2.2. Version: 0 (CV * Version): N.A. 2.2.1. Length: 1960 mm

2.2.2. Width: 760 mm
0.2.3. Commercial name (if available): EGREEN 2.2.3. Height: 1120 mm
(CV * Commercial name (if available)): N.A. 2.2.4. Wheelbase: 1490 mm
2.2.4.1. Wheelbase sidecar: N.A.
0.3. Category, subcategory and sub-subcategory of vehicle: L1e-B 2.2.5. Track width: N.A.
(CV * Category, subcategory and sub-subcategory of vehicle): N.A. 2.2.5.1. Track width front: N.A.
2.2.5.2. Track width rear: N.A
0.4. Company name and address of manufacturer: 2.2.5.3. Track width sidecar: N.A.
ROODER GROUP 2.2.10.6. Ground clearance between the axles: N.A.
HK SHANSU TECHNOLOGY LIMITED 2.2.15. Wheelbase to ground clearance ratio: N.A.
Flat B 4/F Kingswell Commercial Tower, 2.2.17. Seat height: N.A.
171-173 Lockhart Road, Wanchai Hong Kong, China
Masses
0.4.2. Name and address of manufacturer’s authorized representative (if any):
SEVIMOTOR PIT BIKES SPAIN, S.L 2.1.1. Mass in running order: 62 kg
URB NTRA.SRA. DE LA SALUD, NUM. 68 41510 MAIRENA DEL ALCOR-(SEVILLA) SPAIN 2.1.2. Actual mass: 144 kg
2.1.3. Technically permissible maximum laden mass: 219 kg
0.5.1. Location of the manufacturer's statutory plate(s): L, x 1000, y 170, z 400 2.1.3.1. Technically permissible maximum mass on front axle: 79 kg
2.1.3.2. Technically permissible maximum mass on rear axle: 140 kg
0.5.2. Method of attachment of the manufacturer's statutory plate(s): Riveted 2.1.3.3. Technically permissible maximum mass on sidecar axle: N.A.
2.1.7. Technically permissible maximum towable mass:
0.6. Location of the vehicle identification number: R, x 330, y 90, z 450 Braked: N.A. Unbraked: N.A.
2.1.7.1. Technically permissible maximum laden mass of the combination: N.A.
1. Vehicle identification number: ☆R36CP1000JA000001☆ 2.1.7.2. Technically permissible maximum mass at the coupling point: N.A.

Conforms in all respects to the type described in EU type-approval e9*168/2013*11263*00 (type-approval Powertrain
number including extension number) (CV* type-approval number including extension number) issued on
XX,XX,XXXX (date of issue) (CV* date of issue) and 3.1.1.1. Manufacturer: N.A.
3.1.1.2. Engine code (as marked on the engine or other means of identification): N.A.
can be permanently registered in Member States having right/left-hand traffic and using metric/imperial units 3.2.1.2. Working principle of the combustion engine: internal combustion engine (ICE)/positive ignition/
for the speedometer. compression ignition/external combustion engine (ECE)/turbine/compressed air
3.2.1.4.1. Number of cylinders: N.A.
Hong Kong, China. 04/07/2018 3.2.1.4.2. Arrangement of cylinders: LI / V / O / S
--------------------------------- --------------------------- 3.2.1.5. Engine capacity: N.A.
Place Date 1.9. Maximum net power:
N.A. (CV*: N.A.)
1.10. Ratio maximum net power/mass of the vehicle in running order:
N.A. (CV*: N.A.)
3.2.3.1. Fuel type: N.A.
--------------------------------- 3.2.3.2. Vehicle fuel combination: mono-fuel/bi-fuel/flex-fuel
(signature) 3.2.3.2.1. Maximum amount of bio-fuel acceptable in fuel: N.A.
 COMPLETE VEHICLE
EU CERTIFICATE OF CONFORMITY
3.1.2.1. Manufacturer: Rooder Environmental performance
3.1.2.2. Electronic motor code (as marked on the engine or other means of identification):
SS60V1500W50C00001 4.0.1. Environmental step: N.A.
3.3.3.4. 15/30 minutes power: 1.5 kW at 350 min -1 4.0.6. Sound level measured according to: N.A.
3.1.3.1. Manufacturer: N.A. 4.0.6.1. Stationary: N.A. dB(A) (CV*: N.A.)
3.1.3.2. Application code (as marked on the engine or other means of identification): N.A. 4.0.6.2. Drive-by : N.A. dB(A) (CV*: N.A.)
3.3.1. Electric vehicle configuration: pure electric/hybrid electric/manpower electric N.A. 4.0.6.3. Limit value for Lurban: N.A. dB(A) (CV*: N.A.)
3.3.5.2. Category of hybrid electric vehicle:off-vehicle charging/not off-vehicle charging N.A.
3.9.2. Maximum assistance factor: N.A. 3.2.15. Exhaust emissions measured according to N.A.
3.2.15.1. Type I test: tailpipe emissions after cold start, including the deterioration factor, if applicable:
Maximum speed
CO: N.A. mg/km (CV*: N.A.)
1.8. Maximum speed of vehicle: 45 km/h (CV*: N.A.) THC: N.A. mg/km (CV*: N.A.)
3.9.3. Maximum vehicle speed for which the electric motor gives assistance: N.A. NMHC: N.A. (CV*: N.A.)
NOx: N.A. mg/km (CV*: N.A.)
Drive-train and control HC+Nox: N.A. (CV*: N.A.)
PM: N.A. (CV*: N.A.)
3.5.3.9. Transmission (type): W
3.5.4. Gear ratios: N.A. 3.2.15.2 Type II test: tailpipe emissions at (increased) idle and free acceleration:
3.5.4.1. Final drive ratio: N.A. HC: N.A. ppm at normal idling speed and: N.A. ppm at high idle speed (CV*: N.A.)
3.5.4.2. Overall gear ratio in highest gear: N.A. CO: N.A. %vol at normal idling speed and: N.A. %vol at high idle speed (CV*: N.A.)

Installation of tyres 3.2.15.3. Smoke corrected absorption coefficient: N.A. (CV*: N.A.)

6.18.1.1. Tyre size designation: Energy efficiency

Axle 1: 225/55-8, 31N Axle 2: 225/55-8, 31N
Minimum Load capacity index: 4.0.2. Fuel consumption: N.A.l or kg /100km (CV*: N.A.)
Axle 1: 20 Axle 2: 40 the speed symbol must equal or more than J 4.0.3. CO2 emissions: N.A. g/km (CV*: N.A.)
Minimum speed category symbol: 4.0.4. Energy consumption: 31 Wh/km (CV*: N.A.)
Axle 1: B Axle 2: B 4.0.5. Electric range: 60 km (CV*: N.A.)
Recommended pressure:
Axle 1: 225 kpa Axle 2: 250 kpa Conversion of the performance of the vehicle:
Rim size:
Axle 1: 7.00 x 8 Axle 2: 7.00 x 8 8.1. Vehicle appropriate for converting its performance level between subcategories (L3e/L4e)-A2 and
Sidecar wheel: N.A. (L3e/L4e)-A3 and vice versa: yes/no

Bodywork Additional information:

6.20.2.1. Door configuration and number of doors: N.A. 9.1. Remarks: N.A.
6.16.1. Number of seating position: 2 9.2. Exemptions: N.A.
6.16.1.1. Location and arrangement: N.A.

Coupling devices

7.2.8. Type-approval number of coupling-device : N.A.