Crop Solutions Brochure
Uploaded by
The PopeCrop Solutions Brochure
Uploaded by
The PopeIndustrial & Consumer Specialties
CROP SOLUTIONS
Content
1 Adjuvant 3
1.1 Amine ethoxylate 3
1.2 EO/PO block copolymer 3
1.3 Ether sulfate 3
1.4 Fatty alcohol alkoxylate 3
1.5 Fatty alcohol ethoxylate 3
1.6 Sorbitan ester ethoxylated 5
1.7 Special adjuvant 5
1.8 Tributylphenol ethoxylate 7
2 Dispersing agent 9
2.1 EO/PO block copolymer 9
Clariant has long lasting experience in producing 2.2 Methyl oleyl taurate 9
adjuvants and inerts for the crop protection industry. Our 2.3 Phosphate ester 9
2.4 Polycondensation product 9
portfolio is one of the broadest in the market covering 2.5 Sulfonation product 9
nonionic, anionic and cationic surfactants, blends, solvents 2.6 Tristyrylphenol ethoxylate 11
as well as polymeric dispersing agents.
Clariant understands that the consistent quality of our
3 Emulsifier (anionic) 11
3.1 Alkylbenzene sulfonate 11
products is a requirement for your formulation to a
success. Our deep agronomical and agrochemical
understanding enables us to provide top formulation 4 Emulsifier (blend) 13
guidance, to provide an optimized adjuvant 4.1 Anionic-/non-ionic blend 13
recommendation and to support you with the different 4.2 Clariant Matched Pair 13
regulatory inquiries involved in bringing your product to the
market. 5 Emulsifier (nonionic) 15
Constant innovation is the key to future success. Our 5.1 Castor oil ethoxylate 15
ability to transform market requirements into new products 5.2 EO/PO alkoxylation product 15
and services makes us a preferred partner in the crop 5.3 EO/PO block copolymer 15
protection industry. 5.4 Fatty alcohol ethoxylate 17
5.5 Phosphate ester 19
Our globally integrated production network ensures an
5.6 Sorbitan ester ethoxylated 19
optimized supply chain. 5.7 Special emulsifier 19
5.8 Tributylphenol ethoxylate 19
5.9 Tristyrylphenol ethoxylate 21
6 Solvent 23
6.1 Solvent 23
7 Wetting agent 23
7.1 Amine ethoxylate 23
7.2 EO/PO block copolymer 23
7.3 Ether sulfate 23
7.4 Fatty alcohol alkoxylate 25
7.5 Fatty alcohol ethoxylate 25
7.6 Methyl oleyl taurate 25
7.7 Olefin sulfonate 25
7.8 Sulfosuccinate 27
Content
1 Adjuvant 3
1.1 Amine ethoxylate 3
1.2 EO/PO block copolymer 3
1.3 Ether sulfate 3
1.4 Fatty alcohol alkoxylate 3
1.5 Fatty alcohol ethoxylate 3
1.6 Sorbitan ester ethoxylated 5
1.7 Special adjuvant 5
1.8 Tributylphenol ethoxylate 7
2 Dispersing agent 9
2.1 EO/PO block copolymer 9
Clariant has long lasting experience in producing 2.2 Methyl oleyl taurate 9
adjuvants and inerts for the crop protection industry. Our 2.3 Phosphate ester 9
2.4 Polycondensation product 9
portfolio is one of the broadest in the market covering 2.5 Sulfonation product 9
nonionic, anionic and cationic surfactants, blends, solvents 2.6 Tristyrylphenol ethoxylate 11
as well as polymeric dispersing agents.
Clariant understands that the consistent quality of our
3 Emulsifier (anionic) 11
3.1 Alkylbenzene sulfonate 11
products is a requirement for your formulation to a
success. Our deep agronomical and agrochemical
understanding enables us to provide top formulation 4 Emulsifier (blend) 13
guidance, to provide an optimized adjuvant 4.1 Anionic-/non-ionic blend 13
recommendation and to support you with the different 4.2 Clariant Matched Pair 13
regulatory inquiries involved in bringing your product to the
market. 5 Emulsifier (nonionic) 15
Constant innovation is the key to future success. Our 5.1 Castor oil ethoxylate 15
ability to transform market requirements into new products 5.2 EO/PO alkoxylation product 15
and services makes us a preferred partner in the crop 5.3 EO/PO block copolymer 15
protection industry. 5.4 Fatty alcohol ethoxylate 17
5.5 Phosphate ester 19
Our globally integrated production network ensures an
5.6 Sorbitan ester ethoxylated 19
optimized supply chain. 5.7 Special emulsifier 19
5.8 Tributylphenol ethoxylate 19
5.9 Tristyrylphenol ethoxylate 21
6 Solvent 23
6.1 Solvent 23
7 Wetting agent 23
7.1 Amine ethoxylate 23
7.2 EO/PO block copolymer 23
7.3 Ether sulfate 23
7.4 Fatty alcohol alkoxylate 25
7.5 Fatty alcohol ethoxylate 25
7.6 Methyl oleyl taurate 25
7.7 Olefin sulfonate 25
7.8 Sulfosuccinate 27
This information corresponds to the present state
of our knowledge and is intended as a general
description of our products and their possible
applications. Clariant makes no warranties, express
or implied, as to the information’s accuracy,
adequacy, sufficiency or freedom from defect
CLARIANT INTERNATIONAL LTD and assumes no liability in connection with any
use of this information. Any user of this product
Clariant International Ltd. is responsible for determining the suitability of
Clariant’s products for its particular application. For sales to customers located within the
Industrial & Consumer Specialties Nothing included in this information waives any of United States and Canada the following
Global Marketing Crop Solutions Clariant’s General Terms and Conditions of Sale, applies in addition NO EXPRESS OR
which control unless it agrees otherwise in writing. IMPLIED WARRANTY IS MADE OF THE
4132 Muttenz
Any existing intellectual/industrial property rights MERCHANTABILITY, SUITABILITY,
Switzerland must be observed. Due to possible changes in our FITNESS FOR A PARTICULAR PURPOSE
Phone +41 61 469 7212 products and applicable national and international OR OTHERWISE OF ANY PRODUCT OR
regulations and laws, the status of our products SERVICE.
could change. Material Safety Data Sheets providing
Internet safety precautions, that should be observed when ® Product and service marks
handling or storing Clariant products, are available protected by Clariant in many countries
http://www.crop-solutions.clariant.com upon request and are provided in compliance with
applicable law. You should obtain and review the TM Trademark at introductory stage
applicable Material Safety Data Sheet information
E-Mail before handling any of these products. For © 2010 Clariant International Ltd,
[email protected] additional information, please contact Clariant. Rothausstrasse 61, 4132 Muttenz, Switzerland
Adjuvant
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Amine ethoxylate
Genamin C 020 Genamin C 020 is an amine ethoxylate based on cocos fatty amine. Cocos fatty amine with 2 100% Liquid -- -- -- Registration 920, 930
Lower ethoxylated amine ethoxylates (2 to 5 EO) are highly compatible EO required
•
with the Glyphosate potassium salt and high-load formutations of
Glyphosate.
Genamin C 050 Genamin C 050 is an amine ethoxylate based on cocos fatty amine. Cocos fatty amine with 5 100% Liquid -- -- -- Exempted due 920, 930
Lower ethoxylated amine ethoxylates (2 to 5 EO) are highly compatible EO to polymer
•
with the Glyphosate potassium salt and high-load formutations of status
Glyphosate.
Genamin C 100 Genamin C 100 is an amine ethoxylate based on cocos fatty amine. Cocos fatty amine with 10 100% Liquid -- -- -- Exempted due 920, 930
• EO to polymer
status
Genamin O 200 Genamin O 200 is a higher ethoxylated oleyl amine with a lower pour Oleyl amine ethoxylate 100% Liquid -- -- -- Exempted due 920, 930
• point versus the corresponding tallow amine ethoxylate. to polymer
status
Genamin S 080 Genamin S 080 is a wetting agent and can have other adjuvant Stearyl fatty amine with 8 100% Liquid -- -- -- Exempted due 920
• • • functions. EO to polymer
status
Genamin S 100 Genamin S 100 is a wetting agent and can have other adjuvant Stearyl fatty amine with 10 100% Liquid -- -- -- Exempted due 920
• • • functions. EO to polymer
status
Genamin T 050 Lower ethoxylated amine ethoxylates (2 to 5 EO) are highly compatible Tallow fatty amine with 5 100% Liquid -- -- -- Exempted due 920, 930
• with the Glyphosate potassium salt and high-load formutations of EO to polymer
Glyphosate. status
Genamin T 100 Genamin T 100 is a medium EO range tallow amine ethoxylate. Tallow fatty amine with 10 100% Liquid -- -- -- Exempted due 920, 930
• EO to polymer
status
Genamin T 150 Genamint T 150 is the standard adjuvant for Glyphosate IPA Tallow fatty amine with 15 100% Liquid -- -- -- Exempted due 920, 930
formulations. When using Genamin T 150, the addition of a solubilizer EO to polymer
•
is necessary to obtain cold-temperature stability and dissolution status
behaviour in the spray tank.
EO/PO block copolymer
Genapol ED 1616 Genapol ED 1616 is a versatile surfactant which reduces surface Ethylene diamine EO/PO 100% Liquid max. 0,4% ca. 73,0 16 Exempted due 960
• • • tension, acts as compatibilizer in EC and EW formulations and can block copolymer (10% a.m. to polymer
reduce crystallization. in water) status
Ether sulfate
Genapol LRO liq. Genapol LRO is a standard wetting agent/adjuvant for tank-mix uses Alkyl ether sulfate, sodium 26% Liquid ca. 70% -- -- Registration 910, 930
• • and SL formulations of water-soluble herbicides like Glufosinate. salt required
Furthermore it is used as wetting agent in SCs.
Genapol LRO paste Genapol LRO is a standard wetting agent/adjuvant for tank-mix uses Alkyl ether sulfate, sodium 69% Paste ca. 30% -- -- Registration 910, 930
• • • and SL formulations of water-soluble herbicides like Glufosinate. salt required
Furthermore it is used as wetting agent in SCs or WGs.
Fatty alcohol alkoxylate
Synergen W 06 Synergen W 06 is an excellent wetting agent to be used in EC or SC Fatty alcohol alkoxylate 100% Liquid max. 0,5% ca. 60 13,5 Exempted due 910, 930, 960
• • • formulations or in tank-mix adjuvants to increase wetting of the plant • to polymer
surface. It does not require a hazardous labeling. status
Fatty alcohol ethoxylate
Genapol C 050 Besides its use as emulsifier, Genapol C 050 shows excellent adjuvant Coconut fatty alcohol 100% Liquid -- ca. 73 10 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 5 EO • to polymer
foliar applications. status
3 4
Adjuvant
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Amine ethoxylate
Genamin C 020 Genamin C 020 is an amine ethoxylate based on cocos fatty amine. Cocos fatty amine with 2 100% Liquid -- -- -- Registration 920, 930
Lower ethoxylated amine ethoxylates (2 to 5 EO) are highly compatible EO required
•
with the Glyphosate potassium salt and high-load formutations of
Glyphosate.
Genamin C 050 Genamin C 050 is an amine ethoxylate based on cocos fatty amine. Cocos fatty amine with 5 100% Liquid -- -- -- Exempted due 920, 930
Lower ethoxylated amine ethoxylates (2 to 5 EO) are highly compatible EO to polymer
•
with the Glyphosate potassium salt and high-load formutations of status
Glyphosate.
Genamin C 100 Genamin C 100 is an amine ethoxylate based on cocos fatty amine. Cocos fatty amine with 10 100% Liquid -- -- -- Exempted due 920, 930
• EO to polymer
status
Genamin O 200 Genamin O 200 is a higher ethoxylated oleyl amine with a lower pour Oleyl amine ethoxylate 100% Liquid -- -- -- Exempted due 920, 930
• point versus the corresponding tallow amine ethoxylate. to polymer
status
Genamin S 080 Genamin S 080 is a wetting agent and can have other adjuvant Stearyl fatty amine with 8 100% Liquid -- -- -- Exempted due 920
• • • functions. EO to polymer
status
Genamin S 100 Genamin S 100 is a wetting agent and can have other adjuvant Stearyl fatty amine with 10 100% Liquid -- -- -- Exempted due 920
• • • functions. EO to polymer
status
Genamin T 050 Lower ethoxylated amine ethoxylates (2 to 5 EO) are highly compatible Tallow fatty amine with 5 100% Liquid -- -- -- Exempted due 920, 930
• with the Glyphosate potassium salt and high-load formutations of EO to polymer
Glyphosate. status
Genamin T 100 Genamin T 100 is a medium EO range tallow amine ethoxylate. Tallow fatty amine with 10 100% Liquid -- -- -- Exempted due 920, 930
• EO to polymer
status
Genamin T 150 Genamint T 150 is the standard adjuvant for Glyphosate IPA Tallow fatty amine with 15 100% Liquid -- -- -- Exempted due 920, 930
formulations. When using Genamin T 150, the addition of a solubilizer EO to polymer
•
is necessary to obtain cold-temperature stability and dissolution status
behaviour in the spray tank.
EO/PO block copolymer
Genapol ED 1616 Genapol ED 1616 is a versatile surfactant which reduces surface Ethylene diamine EO/PO 100% Liquid max. 0,4% ca. 73,0 16 Exempted due 960
• • • tension, acts as compatibilizer in EC and EW formulations and can block copolymer (10% a.m. to polymer
reduce crystallization. in water) status
Ether sulfate
Genapol LRO liq. Genapol LRO is a standard wetting agent/adjuvant for tank-mix uses Alkyl ether sulfate, sodium 26% Liquid ca. 70% -- -- Registration 910, 930
• • and SL formulations of water-soluble herbicides like Glufosinate. salt required
Furthermore it is used as wetting agent in SCs.
Genapol LRO paste Genapol LRO is a standard wetting agent/adjuvant for tank-mix uses Alkyl ether sulfate, sodium 69% Paste ca. 30% -- -- Registration 910, 930
• • • and SL formulations of water-soluble herbicides like Glufosinate. salt required
Furthermore it is used as wetting agent in SCs or WGs.
Fatty alcohol alkoxylate
Synergen W 06 Synergen W 06 is an excellent wetting agent to be used in EC or SC Fatty alcohol alkoxylate 100% Liquid max. 0,5% ca. 60 13,5 Exempted due 910, 930, 960
• • • formulations or in tank-mix adjuvants to increase wetting of the plant • to polymer
surface. It does not require a hazardous labeling. status
Fatty alcohol ethoxylate
Genapol C 050 Besides its use as emulsifier, Genapol C 050 shows excellent adjuvant Coconut fatty alcohol 100% Liquid -- ca. 73 10 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 5 EO • to polymer
foliar applications. status
3 4
Adjuvant
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Fatty alcohol ethoxylate
Genapol C 070 Besides its use as emulsifier, Genapol C 070 shows excellent adjuvant Coconut fatty alcohol 100% Liquid -- ca. 50,5 12 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 7 EO • to polymer
foliar applications. status
Genapol C 100 Besides its use as emulsifier, Genapol C 100 shows excellent adjuvant Coconut fatty alcohol 100% Pasty-wax -- ca. 90,5 14 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 10 EO like • to polymer
foliar applications. status
Genapol C 120 Besides its use as emulsifier, Genapol C 120 shows excellent adjuvant Coconut fatty alcohol 100% Pasty -- ca. 67 14,5 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 12 EO • to polymer
foliar applications. status
Genapol C 200 Besides its use as emulsifier, Genapol C 200 shows excellent adjuvant Coconut fatty alcohol 100% Pasty, wax- -- ca. 77 16,5 Exempted due 910, 930
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 20 EO like • to polymer
foliar applications. status
Genapol ID 060 Genapol ID 060 is a wetting agent in SC formulations and can also be Iso-decyl alcohol polyglycol 100% Liquid max. 0,2% ca. 43,0 13 Exempted due 910, 930, 960
• • • • used as built-in-adjuvant or as a component of tank-mix adjuvants to ether with 6 EO • to polymer
increase wetting of the plant surface. status
Genapol ID 100 Genapol ID 100 is a wetting agent in SC formulations and can also be Iso-decyl alcohol polyglycol 100% Liquid -- ca. 85,0 14 Exempted due 910, 930, 960
• • • • • used as built-in-adjuvant or as a component of tank-mix adjuvants that ether with 10 EO • to polymer
is rapidly wetting the plant surface and can improve penetration. status
Genapol O 100 The Genapol O types are alcohol ethoxylates based on a naturally Oleyl alcohol polyglycol 100% Pasty-wax -- ca. 50,0 12 Exempted due 910, 930, 960
• • • • derived fatty alcohol. Besides its use as emulsifier, Genapol O 100 ether with 10 EO like • to polymer
shows excellent adjuvant properties in EC and SC formulations. status
Genapol O 109 The Genapol O types are alcohol ethoxylates based on a naturally Oleyl alcohol polyglycol 90% Liquid ca. 10% ca. 50,0 12 Exempted due 910, 930, 960
• • derived fatty alcohol. Genapol O 109 is a 90% aqueous version of ether with 10 EO • to polymer
Genapol O 100 for easier handling in SC formulations . status
Genapol T 150 Genapol T 150 is a vegetable tallow alcohol based emulsifer and is C16/C18 fatty alcohol 100% Wax-like -- ca. 72,0 -- Exempted due 910, 930, 960
• • • • further successfully used as adjuvant in SC formulations. polyglycol ether with 15 EO • to polymer
status
Genapol X 050 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Liquid max. 0,5% ca. 60,5 10 Exempted due 910, 930, 960
• • • • properties which make them the first choice for many NPE-free polyglycol ether with 5 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Genapol X 060 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Liquid max. 0,5% ca. 65,5 11 Exempted due 910, 930, 960
• • • • properties which make them the first choice for many NPE-free polyglycol ether with 6 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Genapol X 080 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Liquid max. 0,5% ca. 75,5 13 Exempted due 910, 930, 960
• • • • properties which make themthe first choice for many NPE-free polyglycol ether with 8 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Genapol X 150 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Wax-like max. 0,5% ca. 70 15 Exempted due 910, 930, 960
• • • • properties which make themthe first choice for many NPE-free polyglycol ether with 15 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Sorbitan ester ethoxylated
Emulsogen 4156 Excellent emulsifier based on renewable resources and with a Sorbitan monolaurate 97% Liquid ca. 2,5% -- 17 Exempted due 910, 930
• • • • favorable toxicological profile used as tank mix adjuvant and in various polyglycol ether with 20 EO to polymer
formulations status
Special adjuvant
Genamin 267 Genamin 267 is the standard ready-to-use adjuvant for Glyphosate 360 Amine ethoxylate 100% Liquid -- -- -- Exempted due 920, 930
• g/l a.e. IPA formulations with an excellent cost-performance profile. No containing a solubilizer to polymer
addition of solubilizer is neccesary. status
5 6
Adjuvant
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Fatty alcohol ethoxylate
Genapol C 070 Besides its use as emulsifier, Genapol C 070 shows excellent adjuvant Coconut fatty alcohol 100% Liquid -- ca. 50,5 12 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 7 EO • to polymer
foliar applications. status
Genapol C 100 Besides its use as emulsifier, Genapol C 100 shows excellent adjuvant Coconut fatty alcohol 100% Pasty-wax -- ca. 90,5 14 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 10 EO like • to polymer
foliar applications. status
Genapol C 120 Besides its use as emulsifier, Genapol C 120 shows excellent adjuvant Coconut fatty alcohol 100% Pasty -- ca. 67 14,5 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 12 EO • to polymer
foliar applications. status
Genapol C 200 Besides its use as emulsifier, Genapol C 200 shows excellent adjuvant Coconut fatty alcohol 100% Pasty, wax- -- ca. 77 16,5 Exempted due 910, 930
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 20 EO like • to polymer
foliar applications. status
Genapol ID 060 Genapol ID 060 is a wetting agent in SC formulations and can also be Iso-decyl alcohol polyglycol 100% Liquid max. 0,2% ca. 43,0 13 Exempted due 910, 930, 960
• • • • used as built-in-adjuvant or as a component of tank-mix adjuvants to ether with 6 EO • to polymer
increase wetting of the plant surface. status
Genapol ID 100 Genapol ID 100 is a wetting agent in SC formulations and can also be Iso-decyl alcohol polyglycol 100% Liquid -- ca. 85,0 14 Exempted due 910, 930, 960
• • • • • used as built-in-adjuvant or as a component of tank-mix adjuvants that ether with 10 EO • to polymer
is rapidly wetting the plant surface and can improve penetration. status
Genapol O 100 The Genapol O types are alcohol ethoxylates based on a naturally Oleyl alcohol polyglycol 100% Pasty-wax -- ca. 50,0 12 Exempted due 910, 930, 960
• • • • derived fatty alcohol. Besides its use as emulsifier, Genapol O 100 ether with 10 EO like • to polymer
shows excellent adjuvant properties in EC and SC formulations. status
Genapol O 109 The Genapol O types are alcohol ethoxylates based on a naturally Oleyl alcohol polyglycol 90% Liquid ca. 10% ca. 50,0 12 Exempted due 910, 930, 960
• • derived fatty alcohol. Genapol O 109 is a 90% aqueous version of ether with 10 EO • to polymer
Genapol O 100 for easier handling in SC formulations . status
Genapol T 150 Genapol T 150 is a vegetable tallow alcohol based emulsifer and is C16/C18 fatty alcohol 100% Wax-like -- ca. 72,0 -- Exempted due 910, 930, 960
• • • • further successfully used as adjuvant in SC formulations. polyglycol ether with 15 EO • to polymer
status
Genapol X 050 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Liquid max. 0,5% ca. 60,5 10 Exempted due 910, 930, 960
• • • • properties which make them the first choice for many NPE-free polyglycol ether with 5 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Genapol X 060 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Liquid max. 0,5% ca. 65,5 11 Exempted due 910, 930, 960
• • • • properties which make them the first choice for many NPE-free polyglycol ether with 6 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Genapol X 080 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Liquid max. 0,5% ca. 75,5 13 Exempted due 910, 930, 960
• • • • properties which make themthe first choice for many NPE-free polyglycol ether with 8 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Genapol X 150 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Wax-like max. 0,5% ca. 70 15 Exempted due 910, 930, 960
• • • • properties which make themthe first choice for many NPE-free polyglycol ether with 15 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Sorbitan ester ethoxylated
Emulsogen 4156 Excellent emulsifier based on renewable resources and with a Sorbitan monolaurate 97% Liquid ca. 2,5% -- 17 Exempted due 910, 930
• • • • favorable toxicological profile used as tank mix adjuvant and in various polyglycol ether with 20 EO to polymer
formulations status
Special adjuvant
Genamin 267 Genamin 267 is the standard ready-to-use adjuvant for Glyphosate 360 Amine ethoxylate 100% Liquid -- -- -- Exempted due 920, 930
• g/l a.e. IPA formulations with an excellent cost-performance profile. No containing a solubilizer to polymer
addition of solubilizer is neccesary. status
5 6
Adjuvant
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Special adjuvant
Genaminox LA Genaminox LA is a cost-efficient adjvuant for TAE-free Glyphosate Aqueous solution of an 30% Liquid -- -- -- Registration --
•
formulations. amphoteric surfactant required
Synergen 9903 Synergen 9903 is a cost-efficient and environmentally friendly adjuvant Aqueous solution of an 32,5% Liquid -- -- -- Registration --
•
for TAE-free Glyphosate formulations. amphoteric adjuvant required
Synergen G 480 Synergen G 480 is cost effective and environmentally friendly adjuvant Aqueous solution of 50% Liquid -- -- -- Registration --
•
for TAE-free, high Load MIPA Glyphosate formulations. surfactants and glycols required
Synergen G2D Synergen G2D is a cost-efficient and environmentally friendly adjuvant Aqueous solution of an 30% Liquid -- -- -- Registration --
•
for TAE-free Glyphosate formulations. amphoteric adjuvant required
Synergen GL 5 Synergen GL 5 is a polyglycerol ester based adjuvant which is derived Copolymer of glycerol, 70% Viscous ca. 30% -- -- Exempted due 910
from renewable resources and is the first choice for TAE-free esterified liquid to polymer
• • • • Glyphosate formulations. Due to its unique structure the product does status
not carry a hazardous labeling and has proven to be a very versatile
adjuvant also for various other active ingredients.
Synergen GU Synergen GU is a universal and cost-efficient adjuvant for glyphosate Aqueous solution of 35% Liquid -- -- -- Registration --
•
formulations. surfactants and glycols required
Tributylphenol ethoxylate
Sapogenat T 080 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid -- ca. 67,0 11 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 8 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 110 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid max. 0,5% ca. 43,0 13 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 11 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 130 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid- -- ca. 63,0 14 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 13 EO pasty • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 180 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Wax-like -- ca. 62,5 15 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 18 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
7 8
Adjuvant
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Special adjuvant
Genaminox LA Genaminox LA is a cost-efficient adjvuant for TAE-free Glyphosate Aqueous solution of an 30% Liquid -- -- -- Registration --
•
formulations. amphoteric surfactant required
Synergen 9903 Synergen 9903 is a cost-efficient and environmentally friendly adjuvant Aqueous solution of an 32,5% Liquid -- -- -- Registration --
•
for TAE-free Glyphosate formulations. amphoteric adjuvant required
Synergen G 480 Synergen G 480 is cost effective and environmentally friendly adjuvant Aqueous solution of 50% Liquid -- -- -- Registration --
•
for TAE-free, high Load MIPA Glyphosate formulations. surfactants and glycols required
Synergen G2D Synergen G2D is a cost-efficient and environmentally friendly adjuvant Aqueous solution of an 30% Liquid -- -- -- Registration --
•
for TAE-free Glyphosate formulations. amphoteric adjuvant required
Synergen GL 5 Synergen GL 5 is a polyglycerol ester based adjuvant which is derived Copolymer of glycerol, 70% Viscous ca. 30% -- -- Exempted due 910
from renewable resources and is the first choice for TAE-free esterified liquid to polymer
• • • • Glyphosate formulations. Due to its unique structure the product does status
not carry a hazardous labeling and has proven to be a very versatile
adjuvant also for various other active ingredients.
Synergen GU Synergen GU is a universal and cost-efficient adjuvant for glyphosate Aqueous solution of 35% Liquid -- -- -- Registration --
•
formulations. surfactants and glycols required
Tributylphenol ethoxylate
Sapogenat T 080 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid -- ca. 67,0 11 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 8 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 110 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid max. 0,5% ca. 43,0 13 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 11 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 130 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid- -- ca. 63,0 14 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 13 EO pasty • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 180 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Wax-like -- ca. 62,5 15 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 18 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
7 8
Dispersing agent
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
EO/PO block copolymer
Genapol PF 40 Genapol PF 40 is an EO/PO block-copolymer which can be used as a co Block copolymer of EO/PO 100% Liquid -- ca. 67,8 16 Exempted due 960
-emulsifier in ECs. Because of its EO/PO ratio and molecular weight the containing 40% EO to polymer
• • • • •
product is also a highly cost-efficient polymeric dispersing agent in SC status
formulations.
Genapol PF 80 Genapol PF 80 is an EO/PO block-copolymer with a high molecular Block copolymer of EO/PO 100% Wax-like -- -- 19 Exempted due 960
• • • • weight and high EO content. containing 80% EO to polymer
status
Methyl oleyl taurate
Hostapon TPHC Hostapon TPHC shows both wetting and dispersing properties which Fatty acid methyl tauride 60-65% Powder max. 1,0% -- -- Registration 910, 930
• • makes it a versatile inert ingredient for many liquid and solid sodium salt required
formulations with an excellent toxicological and ecotoxicological profile.
Phosphate ester
Dispersogen LFH Dispersogen LFH is an excellent surfactant based dispersing agent. 2,4,6-Tri-(1-phenylethyl)- 97% Liquid max. 5,0% -- -- Exempted due 920
• • • Dispersogen LFH exhibits high electrolyte stability and improved phenol polyglycol ether to polymer
emulsification properties. phosphoric ester status
Dispersogen LFS Dispersogen LFS is the neutralized version of Dispersogen LFH. 2,4,6-Tri-(1-phenylethyl)- 96% Viscous max. 4,0% -- -- Exempted due 920
Dispersogen LFS exhibits high electrolyte stability and improved phenol polyglycol ether liquid to polymer
• • •
emulsification properties. monophosphate status
triethanolamine salt
Dispersogen TP 160 Dispersogen TP 160 is an excellent surfactant based dispersing agent 2,4,6-Tri-(1-phenylethyl)- 97,5% Viscous max. 2,5% -- -- Exempted due 920
• • • or can be used as anionic emulsifier. phenol polyglycol ether liquid to polymer
phosphoric ester status
Emulsogen 3475 Emulsogen 3475 is an excellent surfactant based dispersing agent 2,4,6-Tri-(1-phenylethyl)- 96% Viscous max. 4.5% -- -- Exempted due --
highly stable in the presence of electrolytes and improved phenol polyglycol ether Liquid to polymer
• • •
emulsification properties. phosphoric ester, status
triethanolamine salt
Hostaphat 1306 Hostaphat 1306 is a phosphate ester based on iso-tridecanol Alcohol ethoxylate, 100% Viscous -- -- -- Exempted due 910, 920, 930
• • • • ethoxylate and is mainly used in EC and SC formulations as anionic phosphated liquid to polymer
emulsifier and dispersing agent. status
Polycondensation product
Dispersogen ACP 120 Dispersogen ACP 120 is an anionic comb-shaped polymer dispersing Polyacrylate graft 40% Liquid ca. 60% -- -- Exempted due 960
agent which is highly effective at low concentrations and can e.g. be copolymer, anionic to polymer
• •
used to formulate highly stable SC formulations in high electrolyte status
containing environments like Glyphosate salts.
Dispersogen PG Dispersogen PG is a unique polymeric dispersing agent based on Copolymer of glycerol, 70% Liquid ca. 30% -- -- Exempted due 910
Clariant's polyglycerol ester platform. It combines the functionality of a esterified to polymer
• •
wetting as well a dispersing agent and adjuvant properties in one status
product.
Dispersogen PSL 100 Dispersogen PSL 100 is a non-ionic comb-shaped polyacrylate based Polyacrylate graft 100% Viscous -- -- -- Exempted due 960
• • • polymeric dispersing agent which is highly effective at low copolymer, non-ionic liquid to polymer
concentrations. It is provided in easy-to-handle liquid form. status
Sulfonation product
Dispersogen 1494 Dispersogen 1494 is an anionic sulfonated dispersing agent with no Sodium salt of a cresol- 80% Powder max. 8,0% -- -- Exempted due --
• • eye-irritancy for SC and WG formulations. formaldehyde condensation to polymer
product status
Dispersogen 1494 liq. Dispersogen 1494 liq. is an anionic sulfonated dispersing agent with no Sodium salt of a cresol- 35% Liquid -- -- -- Exempted due --
• • eye-irritancy for SC and WG formulations. It is provided as an aqueous formaldehyde condensation to polymer
solution for easier handling. product status
9 10
Dispersing agent
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
EO/PO block copolymer
Genapol PF 40 Genapol PF 40 is an EO/PO block-copolymer which can be used as a co Block copolymer of EO/PO 100% Liquid -- ca. 67,8 16 Exempted due 960
-emulsifier in ECs. Because of its EO/PO ratio and molecular weight the containing 40% EO to polymer
• • • • •
product is also a highly cost-efficient polymeric dispersing agent in SC status
formulations.
Genapol PF 80 Genapol PF 80 is an EO/PO block-copolymer with a high molecular Block copolymer of EO/PO 100% Wax-like -- -- 19 Exempted due 960
• • • • weight and high EO content. containing 80% EO to polymer
status
Methyl oleyl taurate
Hostapon TPHC Hostapon TPHC shows both wetting and dispersing properties which Fatty acid methyl tauride 60-65% Powder max. 1,0% -- -- Registration 910, 930
• • makes it a versatile inert ingredient for many liquid and solid sodium salt required
formulations with an excellent toxicological and ecotoxicological profile.
Phosphate ester
Dispersogen LFH Dispersogen LFH is an excellent surfactant based dispersing agent. 2,4,6-Tri-(1-phenylethyl)- 97% Liquid max. 5,0% -- -- Exempted due 920
• • • Dispersogen LFH exhibits high electrolyte stability and improved phenol polyglycol ether to polymer
emulsification properties. phosphoric ester status
Dispersogen LFS Dispersogen LFS is the neutralized version of Dispersogen LFH. 2,4,6-Tri-(1-phenylethyl)- 96% Viscous max. 4,0% -- -- Exempted due 920
Dispersogen LFS exhibits high electrolyte stability and improved phenol polyglycol ether liquid to polymer
• • •
emulsification properties. monophosphate status
triethanolamine salt
Dispersogen TP 160 Dispersogen TP 160 is an excellent surfactant based dispersing agent 2,4,6-Tri-(1-phenylethyl)- 97,5% Viscous max. 2,5% -- -- Exempted due 920
• • • or can be used as anionic emulsifier. phenol polyglycol ether liquid to polymer
phosphoric ester status
Emulsogen 3475 Emulsogen 3475 is an excellent surfactant based dispersing agent 2,4,6-Tri-(1-phenylethyl)- 96% Viscous max. 4.5% -- -- Exempted due --
highly stable in the presence of electrolytes and improved phenol polyglycol ether Liquid to polymer
• • •
emulsification properties. phosphoric ester, status
triethanolamine salt
Hostaphat 1306 Hostaphat 1306 is a phosphate ester based on iso-tridecanol Alcohol ethoxylate, 100% Viscous -- -- -- Exempted due 910, 920, 930
• • • • ethoxylate and is mainly used in EC and SC formulations as anionic phosphated liquid to polymer
emulsifier and dispersing agent. status
Polycondensation product
Dispersogen ACP 120 Dispersogen ACP 120 is an anionic comb-shaped polymer dispersing Polyacrylate graft 40% Liquid ca. 60% -- -- Exempted due 960
agent which is highly effective at low concentrations and can e.g. be copolymer, anionic to polymer
• •
used to formulate highly stable SC formulations in high electrolyte status
containing environments like Glyphosate salts.
Dispersogen PG Dispersogen PG is a unique polymeric dispersing agent based on Copolymer of glycerol, 70% Liquid ca. 30% -- -- Exempted due 910
Clariant's polyglycerol ester platform. It combines the functionality of a esterified to polymer
• •
wetting as well a dispersing agent and adjuvant properties in one status
product.
Dispersogen PSL 100 Dispersogen PSL 100 is a non-ionic comb-shaped polyacrylate based Polyacrylate graft 100% Viscous -- -- -- Exempted due 960
• • • polymeric dispersing agent which is highly effective at low copolymer, non-ionic liquid to polymer
concentrations. It is provided in easy-to-handle liquid form. status
Sulfonation product
Dispersogen 1494 Dispersogen 1494 is an anionic sulfonated dispersing agent with no Sodium salt of a cresol- 80% Powder max. 8,0% -- -- Exempted due --
• • eye-irritancy for SC and WG formulations. formaldehyde condensation to polymer
product status
Dispersogen 1494 liq. Dispersogen 1494 liq. is an anionic sulfonated dispersing agent with no Sodium salt of a cresol- 35% Liquid -- -- -- Exempted due --
• • eye-irritancy for SC and WG formulations. It is provided as an aqueous formaldehyde condensation to polymer
solution for easier handling. product status
9 10
Dispersing agent
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Sulfonation product
Dispersogen SI Dispersogen SI is a ready to use and optimized combination of Combination of anionic 62% Powder max. 13,0% -- -- Exempted due 910, 920
• • dispersing and wetting agents for various SC and WG formulations. surfactants mixed with to polymer
carrier status
Tristyrylphenol ethoxylate
Emulsogen TS 200 The Emulsogen TS types are well established replacements for NPEs in 2,4,6-Tri(1-phenylethyl)- 100% Liquid- max. 0,5% ca. 57,5 13,5 Exempted due 910, 920
• • • • many formulations. Emulsogen TS 200 is also used as dispersing phenol polyglycol ether pasty • to polymer
agent. with 20 EO status
Emulsifier (anionic)
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Alkylbenzene sulfonate
Calsogen 4814 Calsogen 4814 is a multi-purpose anionic emulsifer based on the better n-C12 alkyl benzene 58% (in Viscous max. 0,5% -- -- Registration 910, 920, 930
degradable linear CaDDBS in an aromatic-free solvent (2-ethylhexanol) sulfonate calcium salt 2- liquid required
• • •
with a high flash point of > 60°C for safer handling. ethylhex
. anol)
Calsogen AR 100 Calsogen AR 100 is a CaDDBS in a high-flash solvent with a flash point iso-C12 alkyl benzene 40% + Liquid max. 0,5% -- -- Registration --
of > 100°C for safer handling. sulfonate calcium salt 10% (in required
• • •
(Solvesso® is a registered trademark from Exxon) Solvesso
® 200)
Calsogen AR 100 ND Calsogen AR 100 ND is a CaDDBS in a naphthalene depleted high-flash iso-C12 alkyl benzene 40% + Liquid max. 0,5% -- -- Registration 910
solvent with a flash point of > 100°C for safer handling. sulfonate calcium salt 10% (in required
• • • (Solvesso® is a registered trademark from Exxon) Solvesso
® 200
ND)
Calsogen ARL 100 ND Calsogen ARL 100 ND combines a safe choice of solvent with a high n-C12 alkyl benzene 40% + Liquid max. 0,5% -- -- Registration 910
flash point (> 100°C) naphthalene depleted solvent and is based on sulfonate calcium salt 10% (in required
• • • the more environmentally friendly linear CaDDBS. Solvesso
(Solvesso® is a registered trademark from Exxon) ® 200
ND)
11 12
Dispersing agent
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Sulfonation product
Dispersogen SI Dispersogen SI is a ready to use and optimized combination of Combination of anionic 62% Powder max. 13,0% -- -- Exempted due 910, 920
• • dispersing and wetting agents for various SC and WG formulations. surfactants mixed with to polymer
carrier status
Tristyrylphenol ethoxylate
Emulsogen TS 200 The Emulsogen TS types are well established replacements for NPEs in 2,4,6-Tri(1-phenylethyl)- 100% Liquid- max. 0,5% ca. 57,5 13,5 Exempted due 910, 920
• • • • many formulations. Emulsogen TS 200 is also used as dispersing phenol polyglycol ether pasty • to polymer
agent. with 20 EO status
Emulsifier (anionic)
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Alkylbenzene sulfonate
Calsogen 4814 Calsogen 4814 is a multi-purpose anionic emulsifer based on the better n-C12 alkyl benzene 58% (in Viscous max. 0,5% -- -- Registration 910, 920, 930
degradable linear CaDDBS in an aromatic-free solvent (2-ethylhexanol) sulfonate calcium salt 2- liquid required
• • •
with a high flash point of > 60°C for safer handling. ethylhex
. anol)
Calsogen AR 100 Calsogen AR 100 is a CaDDBS in a high-flash solvent with a flash point iso-C12 alkyl benzene 40% + Liquid max. 0,5% -- -- Registration --
of > 100°C for safer handling. sulfonate calcium salt 10% (in required
• • •
(Solvesso® is a registered trademark from Exxon) Solvesso
® 200)
Calsogen AR 100 ND Calsogen AR 100 ND is a CaDDBS in a naphthalene depleted high-flash iso-C12 alkyl benzene 40% + Liquid max. 0,5% -- -- Registration 910
solvent with a flash point of > 100°C for safer handling. sulfonate calcium salt 10% (in required
• • • (Solvesso® is a registered trademark from Exxon) Solvesso
® 200
ND)
Calsogen ARL 100 ND Calsogen ARL 100 ND combines a safe choice of solvent with a high n-C12 alkyl benzene 40% + Liquid max. 0,5% -- -- Registration 910
flash point (> 100°C) naphthalene depleted solvent and is based on sulfonate calcium salt 10% (in required
• • • the more environmentally friendly linear CaDDBS. Solvesso
(Solvesso® is a registered trademark from Exxon) ® 200
ND)
11 12
Emulsifier (anionic)
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Alkylbenzene sulfonate
Calsogen EH Calsogen EH is a multi-purpose anionic emulsifer in an aromatic-free iso-C12 alkyl benzene 58% (in Viscous max. 0,5% -- -- Registration 910, 920, 930
solvent (2-ethylhexanol) with a high flash point of > 60°C for safer sulfonate calcium salt 2- liquid required
• • •
handling. ethylhex
anol)
Phenylsulfonat CA Phenylsulfonat CA has been "the" standard anionic emulsifier iso-C12 alkyl benzene 70% (in Viscous max. 0,5% -- -- Registration 920
• • component in uncountable EC formulations for years. sulfonate calcium salt iso- liquid required
butanol)
Phenylsulfonat CAL Phenylsulfonat CAL is based on a linear CaDDBS and shows improved n-C12 alkyl benzene 70% (in Viscous max. 0,5% -- -- Registration 920
• • bio-degradation versus the branched Ca salts and has therefore sulfonate calcium salt iso- liquid required
become the environmentally friendlier alternative. butanol)
Emulsifier (blend)
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Anionic-/non-ionic blend
Emulsogen T Emulsogen T is an established emulsifier for oils which does not Blend on anionic and 100% Liquid -- -- -- Registration --
•
require a hazardous labeling. nonionic surfactants required
Clariant Matched Pair
Emulsogen MP 1 Clariant Matched Pairs comprise different emulsifier blends based on Blend on anionic and 100% Liquid -- -- -- Registration 910, 920, 930
NPE-free products. By combining them in variable ratios, a broad nonionic surfactants required
•
range of EC formulations can be formulated with a small number of
raw materials only.
Emulsogen MP 2 Clariant Matched Pairs comprise different emulsifier blends based on Blend on anionic and 100% Liquid -- -- -- Registration 910, 920, 930
NPE-free products. By combining them in variable ratios, a broad nonionic surfactants required
•
range of EC formulations can be formulated with a small number of
raw materials only.
13 14
Emulsifier (anionic)
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Alkylbenzene sulfonate
Calsogen EH Calsogen EH is a multi-purpose anionic emulsifer in an aromatic-free iso-C12 alkyl benzene 58% (in Viscous max. 0,5% -- -- Registration 910, 920, 930
solvent (2-ethylhexanol) with a high flash point of > 60°C for safer sulfonate calcium salt 2- liquid required
• • •
handling. ethylhex
anol)
Phenylsulfonat CA Phenylsulfonat CA has been "the" standard anionic emulsifier iso-C12 alkyl benzene 70% (in Viscous max. 0,5% -- -- Registration 920
• • component in uncountable EC formulations for years. sulfonate calcium salt iso- liquid required
butanol)
Phenylsulfonat CAL Phenylsulfonat CAL is based on a linear CaDDBS and shows improved n-C12 alkyl benzene 70% (in Viscous max. 0,5% -- -- Registration 920
• • bio-degradation versus the branched Ca salts and has therefore sulfonate calcium salt iso- liquid required
become the environmentally friendlier alternative. butanol)
Emulsifier (blend)
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Anionic-/non-ionic blend
Emulsogen T Emulsogen T is an established emulsifier for oils which does not Blend on anionic and 100% Liquid -- -- -- Registration --
•
require a hazardous labeling. nonionic surfactants required
Clariant Matched Pair
Emulsogen MP 1 Clariant Matched Pairs comprise different emulsifier blends based on Blend on anionic and 100% Liquid -- -- -- Registration 910, 920, 930
NPE-free products. By combining them in variable ratios, a broad nonionic surfactants required
•
range of EC formulations can be formulated with a small number of
raw materials only.
Emulsogen MP 2 Clariant Matched Pairs comprise different emulsifier blends based on Blend on anionic and 100% Liquid -- -- -- Registration 910, 920, 930
NPE-free products. By combining them in variable ratios, a broad nonionic surfactants required
•
range of EC formulations can be formulated with a small number of
raw materials only.
13 14
Emulsifier (nonionic)
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Castor oil ethoxylate
Emulsogen EL 200 Emulsogen EL products are standard NPE-free emulsifiers in various EC Castor oil ethoxylate with 100% Liquid- max. 0,5% -- 10,5 Exempted due 960
• • • • formulations. The products show excellent emulsification 20 EO pasty to polymer
characteristics for many solvents and are not eye-irritating. status
Emulsogen EL 300 LM Emulsogen EL products are standard NPE-free emulsifiers in various EC Castor oil ethoxylate with 100% Liquid max. 1,0% -- 12,5 Exempted due 960
• • • • formulations. The products show excellent emulsification 30 EO to polymer
characteristics for many solvents and are not eye-irritating. status
Emulsogen EL 360 Emulsogen EL products are standard NPE-free emulsifiers in various EC Castor oil ethoxylate with 100% Liquid max. 0,5% -- 13,5 Exempted due 960
• • • • formulations. The products show excellent emulsification 36 EO to polymer
characteristics for many solvents and are not eye-irritating. status
Emulsogen EL 400 Emulsogen EL products are standard NPE-free emulsifiers in various EC Castor oil ethoxylate with 100% Liquid- max. 0,5% -- 14 Exempted due 960
• • • • formulations. The products show excellent emulsification 40 EO pasty to polymer
characteristics for many solvents and are not eye-irritating. status
Emulsogen EL 540 Emulsogen EL products are standard NPE-free emulsifiers in various EC Castor oil ethoxylate with 100% Pasty max. 0,5% -- 15 Exempted due 960
• • • • formulations. The products show excellent emulsification 54 EO to polymer
characteristics for many solvents and are not eye-irritating. status
Emulsogen ELO 200 Emulsogen ELO 200 is an emulsifier which is derived from vegetable Modified castor oil 100% Liquid- max. 1,0% -- -- Exempted due 960
oils with very good emulsification properties for natural oils, their ethoxylate pasty to polymer
• • • •
methyl esters and mineral oils. It has an excellent tox-/ecotox profile status
and requires no hazardous labeling.
EO/PO alkoxylation product
Emulsogen 3510 Emulsogen 3510 is a butanol derived EO/PO copolymer and a standard n-Butanol alkoxylate 100% Wax-like max. 0,5% ca. 85,0% 11 Exempted due 960
• • • • emulsifier component in many EC formulations. • to polymer
status
Emulsogen EP 4901 Emulsogen EP 4901 is a butanol based EO/PO copolymer in liquid form n-Butanol alkoxylate 100% Liquid max. 0,5% -- 16,5 Exempted due 960
• • • • for easier handling. It is mainly used as emulsifier and co-emulsifier in to polymer
EC formulations. status
EO/PO block copolymer
Emulsogen V 1816 Emulsogen V 1816 is an EO/PO block-copoylmer with a low HLB which EO/PO block copolymer 100% Pasty -- ca. 72,9 6 Exempted due 960
• • • • is mainly used as emulsifier or co-emulsifier in EC and SC formulations. • to polymer
status
Genapol ED 1616 Genapol ED 1616 is a versatile surfactant which reduces surface Ethylene diamine EO/PO 100% Liquid max. 0,4% ca. 73,0 16 Exempted due 960
• • • tension, acts as compatibilizer in EC and EW formulations and can block copolymer (10% a.m. to polymer
reduce crystallization. in water) status
Genapol PF 10 Genapol PF 10 is an extremely low-foaming EO/PO block-copolymer Block copolymer of EO/PO 100% Liquid max. 0,5% ca. 35,4 13,5 Exempted due 960
• • • • surfactant with a high PO content. The product even exhibits anti- containing 10% EO • to polymer
foaming properties and can therefore act as defoamer. status
Genapol PF 20 Genapol PF 20 is a low-foaming EO/PO block-copolymer surfactant Block copolymer of EO/PO 100% Liquid -- ca. 56,8 14 Exempted due 960
• • • with a high PO content. containing 20% EO • to polymer
status
Genapol PF 40 Genapol PF 40 is an EO/PO block-copolymer which can be used as a co Block copolymer of EO/PO 100% Liquid -- ca. 67,8 16 Exempted due 960
-emulsifier in ECs. Because of its EO/PO ratio and molecular weight the containing 40% EO to polymer
• • • • •
product is also a highly cost-efficient polymeric dispersing agent in SC status
formulations.
Genapol PF 80 Genapol PF 80 is an EO/PO block-copolymer with a high molecular Block copolymer of EO/PO 100% Wax-like -- -- 19 Exempted due 960
• • • • weight and high EO content. containing 80% EO to polymer
status
Genapol PN 30 Genapol PN 30 is a versatile surfactant which acts as compatibilizer Ethylene diamine EO/PO 100% Viscous -- ca. 28,6 15 Exempted due 960
• • • • and stabilizes SC formulations. block copolymer liquid • to polymer
. status
15 16
Emulsifier (nonionic)
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Castor oil ethoxylate
Emulsogen EL 200 Emulsogen EL products are standard NPE-free emulsifiers in various EC Castor oil ethoxylate with 100% Liquid- max. 0,5% -- 10,5 Exempted due 960
• • • • formulations. The products show excellent emulsification 20 EO pasty to polymer
characteristics for many solvents and are not eye-irritating. status
Emulsogen EL 300 LM Emulsogen EL products are standard NPE-free emulsifiers in various EC Castor oil ethoxylate with 100% Liquid max. 1,0% -- 12,5 Exempted due 960
• • • • formulations. The products show excellent emulsification 30 EO to polymer
characteristics for many solvents and are not eye-irritating. status
Emulsogen EL 360 Emulsogen EL products are standard NPE-free emulsifiers in various EC Castor oil ethoxylate with 100% Liquid max. 0,5% -- 13,5 Exempted due 960
• • • • formulations. The products show excellent emulsification 36 EO to polymer
characteristics for many solvents and are not eye-irritating. status
Emulsogen EL 400 Emulsogen EL products are standard NPE-free emulsifiers in various EC Castor oil ethoxylate with 100% Liquid- max. 0,5% -- 14 Exempted due 960
• • • • formulations. The products show excellent emulsification 40 EO pasty to polymer
characteristics for many solvents and are not eye-irritating. status
Emulsogen EL 540 Emulsogen EL products are standard NPE-free emulsifiers in various EC Castor oil ethoxylate with 100% Pasty max. 0,5% -- 15 Exempted due 960
• • • • formulations. The products show excellent emulsification 54 EO to polymer
characteristics for many solvents and are not eye-irritating. status
Emulsogen ELO 200 Emulsogen ELO 200 is an emulsifier which is derived from vegetable Modified castor oil 100% Liquid- max. 1,0% -- -- Exempted due 960
oils with very good emulsification properties for natural oils, their ethoxylate pasty to polymer
• • • •
methyl esters and mineral oils. It has an excellent tox-/ecotox profile status
and requires no hazardous labeling.
EO/PO alkoxylation product
Emulsogen 3510 Emulsogen 3510 is a butanol derived EO/PO copolymer and a standard n-Butanol alkoxylate 100% Wax-like max. 0,5% ca. 85,0% 11 Exempted due 960
• • • • emulsifier component in many EC formulations. • to polymer
status
Emulsogen EP 4901 Emulsogen EP 4901 is a butanol based EO/PO copolymer in liquid form n-Butanol alkoxylate 100% Liquid max. 0,5% -- 16,5 Exempted due 960
• • • • for easier handling. It is mainly used as emulsifier and co-emulsifier in to polymer
EC formulations. status
EO/PO block copolymer
Emulsogen V 1816 Emulsogen V 1816 is an EO/PO block-copoylmer with a low HLB which EO/PO block copolymer 100% Pasty -- ca. 72,9 6 Exempted due 960
• • • • is mainly used as emulsifier or co-emulsifier in EC and SC formulations. • to polymer
status
Genapol ED 1616 Genapol ED 1616 is a versatile surfactant which reduces surface Ethylene diamine EO/PO 100% Liquid max. 0,4% ca. 73,0 16 Exempted due 960
• • • tension, acts as compatibilizer in EC and EW formulations and can block copolymer (10% a.m. to polymer
reduce crystallization. in water) status
Genapol PF 10 Genapol PF 10 is an extremely low-foaming EO/PO block-copolymer Block copolymer of EO/PO 100% Liquid max. 0,5% ca. 35,4 13,5 Exempted due 960
• • • • surfactant with a high PO content. The product even exhibits anti- containing 10% EO • to polymer
foaming properties and can therefore act as defoamer. status
Genapol PF 20 Genapol PF 20 is a low-foaming EO/PO block-copolymer surfactant Block copolymer of EO/PO 100% Liquid -- ca. 56,8 14 Exempted due 960
• • • with a high PO content. containing 20% EO • to polymer
status
Genapol PF 40 Genapol PF 40 is an EO/PO block-copolymer which can be used as a co Block copolymer of EO/PO 100% Liquid -- ca. 67,8 16 Exempted due 960
-emulsifier in ECs. Because of its EO/PO ratio and molecular weight the containing 40% EO to polymer
• • • • •
product is also a highly cost-efficient polymeric dispersing agent in SC status
formulations.
Genapol PF 80 Genapol PF 80 is an EO/PO block-copolymer with a high molecular Block copolymer of EO/PO 100% Wax-like -- -- 19 Exempted due 960
• • • • weight and high EO content. containing 80% EO to polymer
status
Genapol PN 30 Genapol PN 30 is a versatile surfactant which acts as compatibilizer Ethylene diamine EO/PO 100% Viscous -- ca. 28,6 15 Exempted due 960
• • • • and stabilizes SC formulations. block copolymer liquid • to polymer
. status
15 16
Emulsifier (nonionic)
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Fatty alcohol ethoxylate
Genapol C 050 Besides its use as emulsifier, Genapol C 050 shows excellent adjuvant Coconut fatty alcohol 100% Liquid -- ca. 73 10 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 5 EO • to polymer
foliar applications. status
Genapol C 070 Besides its use as emulsifier, Genapol C 070 shows excellent adjuvant Coconut fatty alcohol 100% Liquid -- ca. 50,5 12 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 7 EO • to polymer
foliar applications. status
Genapol C 100 Besides its use as emulsifier, Genapol C 100 shows excellent adjuvant Coconut fatty alcohol 100% Pasty-wax -- ca. 90,5 14 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 10 EO like • to polymer
foliar applications. status
Genapol C 120 Besides its use as emulsifier, Genapol C 120 shows excellent adjuvant Coconut fatty alcohol 100% Pasty -- ca. 67 14,5 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 12 EO • to polymer
foliar applications. status
Genapol C 200 Besides its use as emulsifier, Genapol C 200 shows excellent adjuvant Coconut fatty alcohol 100% Pasty, wax- -- ca. 77 16,5 Exempted due 910, 930
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 20 EO like • to polymer
foliar applications. status
Genapol LA 030 The Genapol LA types are readily biodegradable ethoxylates based on C12/14 fatty alcohol 100% Liquid max. 0,3% ca. 54,0 8 Exempted due 910, 930, 960
• • • • a naturally derived lauryl alcohol. polyglycol ether with 3 EO • to polymer
status
Genapol LA 070 The Genapol LA types are readily biodegradable ethoxylates based on C12/14 fatty alcohol 100% Liquid max. 0,2% ca. 57,0 12 Exempted due 910, 930, 960
• • • • a naturally derived lauryl alcohol. polyglycol ether with 7 EO • to polymer
status
Genapol LA 080 The Genapol LA types are readily biodegradable ethoxylates based on C12/14 fatty alcohol 100% Liquid max. 0,5% ca. 64,0 13 Exempted due 910, 930, 960
• • • • a naturally derived lauryl alcohol. polyglycol ether with 8 EO • to polymer
status
Genapol O 100 The Genapol O types are alcohol ethoxylates based on a naturally Oleyl alcohol polyglycol 100% Pasty-wax -- ca. 50,0 12 Exempted due 910, 930, 960
• • • • derived fatty alcohol. Besides its use as emulsifier, Genapol O 100 ether with 10 EO like • to polymer
shows excellent adjuvant properties in EC and SC formulations. status
Genapol O 109 The Genapol O types are alcohol ethoxylates based on a naturally Oleyl alcohol polyglycol 90% Liquid ca. 10% ca. 50,0 12 Exempted due 910, 930, 960
• • derived fatty alcohol. Genapol O 109 is a 90% aqueous version of ether with 10 EO • to polymer
Genapol O 100 for easier handling in SC formulations . status
Genapol O 150 The Genapol O types are alcohol ethoxylates based on a naturally Oleyl alcohol polyglycol 100% Wax-like -- ca. 72,0 14 Exempted due 910, 930, 960
• • • • derived fatty alcohol. ether with 15 EO • to polymer
status
Genapol O 200 The Genapol O types are alcohol ethoxylates based on a naturally Oleyl alcohol polyglycol 100% Wax-like -- ca. 75,0 15,5 Exempted due 910, 930, 960
• • • • derived fatty alcohol. ether with 20 EO • to polymer
status
Genapol T 150 Genapol T 150 is a vegetable tallow alcohol based emulsifer and is C16/C18 fatty alcohol 100% Wax-like -- ca. 72,0 -- Exempted due 910, 930, 960
• • • • further successfully used as adjuvant in SC formulations. polyglycol ether with 15 EO • to polymer
status
Genapol UD 050 The Genapol UD products are ethoxylates based on a branched fatty C11 oxo alcohol polyglycol 100% Liquid -- ca. 68,0 11 Exempted due 910, 930, 960
• • • • alcohol. The products exhibit good wetting and low-foaming ether with 5 EO • to polymer
characterics. status
Genapol UD 079 The Genapol UD products are ethoxylates based on a branched fatty C11 oxo alcohol polyglycol 90% Liquid ca. 10% ca. 53,5 13 Exempted due 910, 930, 960
alcohol. The products exhibit good wetting and low-foaming ether with 7 EO to polymer
• • • •
characterics. Genapol UD 079 is provided as an aqueous solution for status
easier handling.
Genapol UD 080 The Genapol UD products are ethoxylates based on a branched fatty C11 oxo alcohol polyglycol 100% Liquid -- ca. 63,5 13 Exempted due 910, 930, 960
• • • alcohol. The products exhibit good wetting and low-foaming ether with 8 EO • to polymer
characterics. status
17 18
Emulsifier (nonionic)
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Fatty alcohol ethoxylate
Genapol C 050 Besides its use as emulsifier, Genapol C 050 shows excellent adjuvant Coconut fatty alcohol 100% Liquid -- ca. 73 10 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 5 EO • to polymer
foliar applications. status
Genapol C 070 Besides its use as emulsifier, Genapol C 070 shows excellent adjuvant Coconut fatty alcohol 100% Liquid -- ca. 50,5 12 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 7 EO • to polymer
foliar applications. status
Genapol C 100 Besides its use as emulsifier, Genapol C 100 shows excellent adjuvant Coconut fatty alcohol 100% Pasty-wax -- ca. 90,5 14 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 10 EO like • to polymer
foliar applications. status
Genapol C 120 Besides its use as emulsifier, Genapol C 120 shows excellent adjuvant Coconut fatty alcohol 100% Pasty -- ca. 67 14,5 Exempted due 910, 930, 960
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 12 EO • to polymer
foliar applications. status
Genapol C 200 Besides its use as emulsifier, Genapol C 200 shows excellent adjuvant Coconut fatty alcohol 100% Pasty, wax- -- ca. 77 16,5 Exempted due 910, 930
• • • • properties in EC and SC formulations by enhancing performance in polyglycol ether with 20 EO like • to polymer
foliar applications. status
Genapol LA 030 The Genapol LA types are readily biodegradable ethoxylates based on C12/14 fatty alcohol 100% Liquid max. 0,3% ca. 54,0 8 Exempted due 910, 930, 960
• • • • a naturally derived lauryl alcohol. polyglycol ether with 3 EO • to polymer
status
Genapol LA 070 The Genapol LA types are readily biodegradable ethoxylates based on C12/14 fatty alcohol 100% Liquid max. 0,2% ca. 57,0 12 Exempted due 910, 930, 960
• • • • a naturally derived lauryl alcohol. polyglycol ether with 7 EO • to polymer
status
Genapol LA 080 The Genapol LA types are readily biodegradable ethoxylates based on C12/14 fatty alcohol 100% Liquid max. 0,5% ca. 64,0 13 Exempted due 910, 930, 960
• • • • a naturally derived lauryl alcohol. polyglycol ether with 8 EO • to polymer
status
Genapol O 100 The Genapol O types are alcohol ethoxylates based on a naturally Oleyl alcohol polyglycol 100% Pasty-wax -- ca. 50,0 12 Exempted due 910, 930, 960
• • • • derived fatty alcohol. Besides its use as emulsifier, Genapol O 100 ether with 10 EO like • to polymer
shows excellent adjuvant properties in EC and SC formulations. status
Genapol O 109 The Genapol O types are alcohol ethoxylates based on a naturally Oleyl alcohol polyglycol 90% Liquid ca. 10% ca. 50,0 12 Exempted due 910, 930, 960
• • derived fatty alcohol. Genapol O 109 is a 90% aqueous version of ether with 10 EO • to polymer
Genapol O 100 for easier handling in SC formulations . status
Genapol O 150 The Genapol O types are alcohol ethoxylates based on a naturally Oleyl alcohol polyglycol 100% Wax-like -- ca. 72,0 14 Exempted due 910, 930, 960
• • • • derived fatty alcohol. ether with 15 EO • to polymer
status
Genapol O 200 The Genapol O types are alcohol ethoxylates based on a naturally Oleyl alcohol polyglycol 100% Wax-like -- ca. 75,0 15,5 Exempted due 910, 930, 960
• • • • derived fatty alcohol. ether with 20 EO • to polymer
status
Genapol T 150 Genapol T 150 is a vegetable tallow alcohol based emulsifer and is C16/C18 fatty alcohol 100% Wax-like -- ca. 72,0 -- Exempted due 910, 930, 960
• • • • further successfully used as adjuvant in SC formulations. polyglycol ether with 15 EO • to polymer
status
Genapol UD 050 The Genapol UD products are ethoxylates based on a branched fatty C11 oxo alcohol polyglycol 100% Liquid -- ca. 68,0 11 Exempted due 910, 930, 960
• • • • alcohol. The products exhibit good wetting and low-foaming ether with 5 EO • to polymer
characterics. status
Genapol UD 079 The Genapol UD products are ethoxylates based on a branched fatty C11 oxo alcohol polyglycol 90% Liquid ca. 10% ca. 53,5 13 Exempted due 910, 930, 960
alcohol. The products exhibit good wetting and low-foaming ether with 7 EO to polymer
• • • •
characterics. Genapol UD 079 is provided as an aqueous solution for status
easier handling.
Genapol UD 080 The Genapol UD products are ethoxylates based on a branched fatty C11 oxo alcohol polyglycol 100% Liquid -- ca. 63,5 13 Exempted due 910, 930, 960
• • • alcohol. The products exhibit good wetting and low-foaming ether with 8 EO • to polymer
characterics. status
17 18
Emulsifier (nonionic)
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Fatty alcohol ethoxylate
Genapol X 050 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Liquid max. 0,5% ca. 60,5 10 Exempted due 910, 930, 960
• • • • properties which make them the first choice for many NPE-free polyglycol ether with 5 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Genapol X 060 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Liquid max. 0,5% ca. 65,5 11 Exempted due 910, 930, 960
• • • • properties which make them the first choice for many NPE-free polyglycol ether with 6 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Genapol X 080 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Liquid max. 0,5% ca. 75,5 13 Exempted due 910, 930, 960
• • • • properties which make themthe first choice for many NPE-free polyglycol ether with 8 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Genapol X 150 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Wax-like max. 0,5% ca. 70 15 Exempted due 910, 930, 960
• • • • properties which make themthe first choice for many NPE-free polyglycol ether with 15 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Genapol XM 060 Genapol XM 060 is a methyl-end-capped ethoxylate based on Genapol Iso-tridecyl alcohol 100% Liquid max. 0,5% -- 11 Exempted due --
• • X 060 which can enable the formulation of very sensitive active ethoxylate methyl ether to polymer
ingredients in non-aqueous formulations like ECs and ODs. with 6 EO status
Genapol XM 150 Genapol XM 150 is a methyl-end-capped ethoxylate based on Genapol Iso-tridecyl alcohol 100% Wax-like max. 0,5% -- 15 Exempted due --
• • • X 060 which can enable the formulation of very sensitive active ethoxylate methyl ether to polymer
ingredients in non-aqueous formulations like ECs and ODs. with 15 EO status
Phosphate ester
Dispersogen LFH Dispersogen LFH is an excellent surfactant based dispersing agent. 2,4,6-Tri-(1-phenylethyl)- 97% Liquid max. 5,0% -- -- Exempted due 920
• • • Dispersogen LFH exhibits high electrolyte stability and improved phenol polyglycol ether to polymer
emulsification properties. phosphoric ester status
Dispersogen LFS Dispersogen LFS is the neutralized version of Dispersogen LFH. 2,4,6-Tri-(1-phenylethyl)- 96% Viscous max. 4,0% -- -- Exempted due 920
Dispersogen LFS exhibits high electrolyte stability and improved phenol polyglycol ether liquid to polymer
• • •
emulsification properties. monophosphate status
triethanolamine salt
Emulsogen 3475 Emulsogen 3475 is an excellent surfactant based dispersing agent 2,4,6-Tri-(1-phenylethyl)- 96% Viscous max. 4.5% -- -- Exempted due --
highly stable in the presence of electrolytes and improved phenol polyglycol ether Liquid to polymer
• • •
emulsification properties. phosphoric ester, status
triethanolamine salt
Sorbitan ester ethoxylated
Emulsogen 4156 Excellent emulsifier based on renewable resources and with a Sorbitan monolaurate 97% Liquid ca. 2,5% -- 17 Exempted due 910, 930
• • • • favorable toxicological profile used as tank mix adjuvant and in various polyglycol ether with 20 EO to polymer
formulations status
Special emulsifier
Emulsogen M Emulsogen M is an excellent emulsifier for mineral oils with a low pour Oleyl alcohol polyglycol 100% Liquid max. 1,5% ca. 66,8 9 Exempted due 910, 930, 960
• • • • point. The product is not eye-irritating and does not require any ether • to polymer
hazardous labeling. status
Emulsogen MTP 070 Emulsogen MTP 070 is an excellent emulsifier for mineral oils with Oxalkylate based on 100% Liquid max. 3,0% ca. 67,0 11 Exempted due 910, 930
• • • • reduced foaming tendency. The product is not eye-irritating and does vegetable fatty alcohol • to polymer
not require any hazardous labeling. status
Tributylphenol ethoxylate
Sapogenat T 040 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid -- ca. 27,5 8 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 4 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 060 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid -- ca. 54,7 10 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 6 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
19 20
Emulsifier (nonionic)
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Fatty alcohol ethoxylate
Genapol X 050 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Liquid max. 0,5% ca. 60,5 10 Exempted due 910, 930, 960
• • • • properties which make them the first choice for many NPE-free polyglycol ether with 5 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Genapol X 060 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Liquid max. 0,5% ca. 65,5 11 Exempted due 910, 930, 960
• • • • properties which make them the first choice for many NPE-free polyglycol ether with 6 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Genapol X 080 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Liquid max. 0,5% ca. 75,5 13 Exempted due 910, 930, 960
• • • • properties which make themthe first choice for many NPE-free polyglycol ether with 8 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Genapol X 150 The Genapol X products combine low-foam emulsification and wetting Iso-tridecyl alcohol 100% Wax-like max. 0,5% ca. 70 15 Exempted due 910, 930, 960
• • • • properties which make themthe first choice for many NPE-free polyglycol ether with 15 EO • to polymer
formulations as emulsifier, wetting agent and adjuvant. status
Genapol XM 060 Genapol XM 060 is a methyl-end-capped ethoxylate based on Genapol Iso-tridecyl alcohol 100% Liquid max. 0,5% -- 11 Exempted due --
• • X 060 which can enable the formulation of very sensitive active ethoxylate methyl ether to polymer
ingredients in non-aqueous formulations like ECs and ODs. with 6 EO status
Genapol XM 150 Genapol XM 150 is a methyl-end-capped ethoxylate based on Genapol Iso-tridecyl alcohol 100% Wax-like max. 0,5% -- 15 Exempted due --
• • • X 060 which can enable the formulation of very sensitive active ethoxylate methyl ether to polymer
ingredients in non-aqueous formulations like ECs and ODs. with 15 EO status
Phosphate ester
Dispersogen LFH Dispersogen LFH is an excellent surfactant based dispersing agent. 2,4,6-Tri-(1-phenylethyl)- 97% Liquid max. 5,0% -- -- Exempted due 920
• • • Dispersogen LFH exhibits high electrolyte stability and improved phenol polyglycol ether to polymer
emulsification properties. phosphoric ester status
Dispersogen LFS Dispersogen LFS is the neutralized version of Dispersogen LFH. 2,4,6-Tri-(1-phenylethyl)- 96% Viscous max. 4,0% -- -- Exempted due 920
Dispersogen LFS exhibits high electrolyte stability and improved phenol polyglycol ether liquid to polymer
• • •
emulsification properties. monophosphate status
triethanolamine salt
Emulsogen 3475 Emulsogen 3475 is an excellent surfactant based dispersing agent 2,4,6-Tri-(1-phenylethyl)- 96% Viscous max. 4.5% -- -- Exempted due --
highly stable in the presence of electrolytes and improved phenol polyglycol ether Liquid to polymer
• • •
emulsification properties. phosphoric ester, status
triethanolamine salt
Sorbitan ester ethoxylated
Emulsogen 4156 Excellent emulsifier based on renewable resources and with a Sorbitan monolaurate 97% Liquid ca. 2,5% -- 17 Exempted due 910, 930
• • • • favorable toxicological profile used as tank mix adjuvant and in various polyglycol ether with 20 EO to polymer
formulations status
Special emulsifier
Emulsogen M Emulsogen M is an excellent emulsifier for mineral oils with a low pour Oleyl alcohol polyglycol 100% Liquid max. 1,5% ca. 66,8 9 Exempted due 910, 930, 960
• • • • point. The product is not eye-irritating and does not require any ether • to polymer
hazardous labeling. status
Emulsogen MTP 070 Emulsogen MTP 070 is an excellent emulsifier for mineral oils with Oxalkylate based on 100% Liquid max. 3,0% ca. 67,0 11 Exempted due 910, 930
• • • • reduced foaming tendency. The product is not eye-irritating and does vegetable fatty alcohol • to polymer
not require any hazardous labeling. status
Tributylphenol ethoxylate
Sapogenat T 040 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid -- ca. 27,5 8 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 4 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 060 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid -- ca. 54,7 10 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 6 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
19 20
Emulsifier (nonionic)
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Tributylphenol ethoxylate
Sapogenat T 080 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid -- ca. 67,0 11 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 8 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 110 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid max. 0,5% ca. 43,0 13 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 11 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 130 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid- -- ca. 63,0 14 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 13 EO pasty • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 180 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Wax-like -- ca. 62,5 15 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 18 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 300 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Wax-like -- -- 17 Exempted due --
• • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 30 EO to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 500 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Wax-like -- -- 18 Exempted due --
• • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 50 EO to polymer
wetters, increasing pesticide efficacy in foliar application. status
Tristyrylphenol ethoxylate
Emulsogen TS 100 The Emulsogen TS types are well established replacements for NPEs in 2,4,6-Tri(1-phenylethyl)- 100% Liquid max. 0,3% ca. 67,0 10 Exempted due 910, 920
• • • • many formulations. phenol polyglycol ether • to polymer
with 10 EO status
Emulsogen TS 160 The Emulsogen TS types are well established replacements for NPEs in 2,4,6-Tri(1-phenylethyl)- 100% Liquid max. 0,3% ca. 60,0 13 Exempted due 910, 920
• • • • many formulations. phenol polyglycol ether • to polymer
with 16 EO status
Emulsogen TS 200 The Emulsogen TS types are well established replacements for NPEs in 2,4,6-Tri(1-phenylethyl)- 100% Liquid- max. 0,5% ca. 57,5 13,5 Exempted due 910, 920
• • • • many formulations. Emulsogen TS 200 is also used as dispersing phenol polyglycol ether pasty • to polymer
agent. with 20 EO status
Emulsogen TS 290 The Emulsogen TS types are well established replacements for NPEs in 2,4,6-Tri(1-phenylethyl)- 100% Wax-like max. 0,3% ca. 68,0 15 Exempted due 910, 920
• • • • many formulations. phenol polyglycol ether • to polymer
with 29 EO status
Emulsogen TS 540 The Emulsogen TS types are well established replacements for NPEs in 2,4,6-Tri(1-phenylethyl)- 100% Wax max. 0,3% ca. 73,0 17 Exempted due 910, 920
• • • many formulations. phenol polyglycol ether • to polymer
with 54 EO status
Emulsogen TS 600 The Emulsogen TS types are well established replacements for NPEs in 2,4,6-Tri(1-phenylethyl)- 100% Wax max. 0,3% -- 17,5 Exempted due 910, 920
• • • many formulations. phenol polyglycol ether to polymer
with 60 EO status
21 22
Emulsifier (nonionic)
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Tributylphenol ethoxylate
Sapogenat T 080 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid -- ca. 67,0 11 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 8 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 110 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid max. 0,5% ca. 43,0 13 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 11 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 130 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Liquid- -- ca. 63,0 14 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 13 EO pasty • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 180 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Wax-like -- ca. 62,5 15 Exempted due --
• • • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 18 EO • to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 300 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Wax-like -- -- 17 Exempted due --
• • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 30 EO to polymer
wetters, increasing pesticide efficacy in foliar application. status
Sapogenat T 500 Sapogenat T products are the best-performing NPE alternatives: Tri-sec-butylphenol 100% Wax-like -- -- 18 Exempted due --
• • • Besides excellent emulsification power, these surfactants are also good polyglycol ether with 50 EO to polymer
wetters, increasing pesticide efficacy in foliar application. status
Tristyrylphenol ethoxylate
Emulsogen TS 100 The Emulsogen TS types are well established replacements for NPEs in 2,4,6-Tri(1-phenylethyl)- 100% Liquid max. 0,3% ca. 67,0 10 Exempted due 910, 920
• • • • many formulations. phenol polyglycol ether • to polymer
with 10 EO status
Emulsogen TS 160 The Emulsogen TS types are well established replacements for NPEs in 2,4,6-Tri(1-phenylethyl)- 100% Liquid max. 0,3% ca. 60,0 13 Exempted due 910, 920
• • • • many formulations. phenol polyglycol ether • to polymer
with 16 EO status
Emulsogen TS 200 The Emulsogen TS types are well established replacements for NPEs in 2,4,6-Tri(1-phenylethyl)- 100% Liquid- max. 0,5% ca. 57,5 13,5 Exempted due 910, 920
• • • • many formulations. Emulsogen TS 200 is also used as dispersing phenol polyglycol ether pasty • to polymer
agent. with 20 EO status
Emulsogen TS 290 The Emulsogen TS types are well established replacements for NPEs in 2,4,6-Tri(1-phenylethyl)- 100% Wax-like max. 0,3% ca. 68,0 15 Exempted due 910, 920
• • • • many formulations. phenol polyglycol ether • to polymer
with 29 EO status
Emulsogen TS 540 The Emulsogen TS types are well established replacements for NPEs in 2,4,6-Tri(1-phenylethyl)- 100% Wax max. 0,3% ca. 73,0 17 Exempted due 910, 920
• • • many formulations. phenol polyglycol ether • to polymer
with 54 EO status
Emulsogen TS 600 The Emulsogen TS types are well established replacements for NPEs in 2,4,6-Tri(1-phenylethyl)- 100% Wax max. 0,3% -- 17,5 Exempted due 910, 920
• • • many formulations. phenol polyglycol ether to polymer
with 60 EO status
21 22
Solvent
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Solvent
Dipropylene glycol DME Dipropylene glycol DME is a safe and environmentally friendly solvent Dipropylene glycol dimethyl > 99% Liquid max. 0,1% -- -- Registration --
• • and an established replacement for NMP in various application areas. ether required
The product does not require a hazardous labeling.
Genagen 4166 Genagen 4166 is a dimethylamide based on naturally derived fatty Dimethylamide of C8/C10 100% Liquid max. 0,5% -- -- Registration 920
• • acids. This extremely versatile non-water miscible solvent is used for fatty acid required
various EC, EW and SE formulations.
Genagen 4296 Genagen 4296 is a dimethylamide based on naturally derived fatty Dimethylamide of C10 fatty 100% Liquid max. 0,5% -- -- Registration 920
• • acids. This extremely versatile non-water miscible solvent is used for acid required
various EC, EW formulations.
Wetting agent
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Amine ethoxylate
Genamin S 080 Genamin S 080 is a wetting agent and can have other adjuvant Stearyl fatty amine with 8 100% Liquid -- -- -- Exempted due 920
• • • functions. EO to polymer
status
Genamin S 100 Genamin S 100 is a wetting agent and can have other adjuvant Stearyl fatty amine with 10 100% Liquid -- -- -- Exempted due 920
• • • functions. EO to polymer
status
EO/PO block copolymer
Genapol PN 30 Genapol PN 30 is a versatile surfactant which acts as compatibilizer Ethylene diamine EO/PO 100% Viscous -- ca. 28,6 15 Exempted due 960
• • • • and stabilizes SC formulations. block copolymer liquid • to polymer
. status
Ether sulfate
Genapol LRO liq. Genapol LRO is a standard wetting agent/adjuvant for tank-mix uses Alkyl ether sulfate, sodium 26% Liquid ca. 70% -- -- Registration 910, 930
• • and SL formulations of water-soluble herbicides like Glufosinate. salt required
Furthermore it is used as wetting agent in SCs.
23 24
Solvent
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Solvent
Dipropylene glycol DME Dipropylene glycol DME is a safe and environmentally friendly solvent Dipropylene glycol dimethyl > 99% Liquid max. 0,1% -- -- Registration --
• • and an established replacement for NMP in various application areas. ether required
The product does not require a hazardous labeling.
Genagen 4166 Genagen 4166 is a dimethylamide based on naturally derived fatty Dimethylamide of C8/C10 100% Liquid max. 0,5% -- -- Registration 920
• • acids. This extremely versatile non-water miscible solvent is used for fatty acid required
various EC, EW and SE formulations.
Genagen 4296 Genagen 4296 is a dimethylamide based on naturally derived fatty Dimethylamide of C10 fatty 100% Liquid max. 0,5% -- -- Registration 920
• • acids. This extremely versatile non-water miscible solvent is used for acid required
various EC, EW formulations.
Wetting agent
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Amine ethoxylate
Genamin S 080 Genamin S 080 is a wetting agent and can have other adjuvant Stearyl fatty amine with 8 100% Liquid -- -- -- Exempted due 920
• • • functions. EO to polymer
status
Genamin S 100 Genamin S 100 is a wetting agent and can have other adjuvant Stearyl fatty amine with 10 100% Liquid -- -- -- Exempted due 920
• • • functions. EO to polymer
status
EO/PO block copolymer
Genapol PN 30 Genapol PN 30 is a versatile surfactant which acts as compatibilizer Ethylene diamine EO/PO 100% Viscous -- ca. 28,6 15 Exempted due 960
• • • • and stabilizes SC formulations. block copolymer liquid • to polymer
. status
Ether sulfate
Genapol LRO liq. Genapol LRO is a standard wetting agent/adjuvant for tank-mix uses Alkyl ether sulfate, sodium 26% Liquid ca. 70% -- -- Registration 910, 930
• • and SL formulations of water-soluble herbicides like Glufosinate. salt required
Furthermore it is used as wetting agent in SCs.
23 24
Wetting agent
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Ether sulfate
Genapol LRO paste Genapol LRO is a standard wetting agent/adjuvant for tank-mix uses Alkyl ether sulfate, sodium 69% Paste ca. 30% -- -- Registration 910, 930
• • • and SL formulations of water-soluble herbicides like Glufosinate. salt required
Furthermore it is used as wetting agent in SCs or WGs.
Fatty alcohol alkoxylate
Genapol EP 0244 Genapol EP 0244 combines extremely low-foaming tendency with very Fatty alcohol alkoxylate 100% Liquid -- ca. 36,5 11 Exempted due 910, 930, 960
• • • low surface tension making it a powerful wetting agent in demanding • to polymer
environments. The product does not require a hazardous labeling. status
Genapol EP 2564 Genapol EP 2564 is an alkoxylate wetting agent which does not require Fatty alcohol alkoxylate 100% Liquid -- ca. 30,0 11 Exempted due 910, 930, 960
• • • a hazardous labeling. • to polymer
status
Genapol EP 2584 Genapol EP 2584 is an alkoxylate wetting agent which does not require Fatty alcohol alkoxylate 100% Liquid -- ca. 40,5 12 Exempted due 910, 930, 960
• • • a hazardous labeling. • to polymer
status
Synergen W 06 Synergen W 06 is an excellent wetting agent to be used in EC or SC Fatty alcohol alkoxylate 100% Liquid max. 0,5% ca. 60 13,5 Exempted due 910, 930, 960
• • • formulations or in tank-mix adjuvants to increase wetting of the plant • to polymer
surface. It does not require a hazardous labeling. status
Fatty alcohol ethoxylate
Genapol ID 060 Genapol ID 060 is a wetting agent in SC formulations and can also be Iso-decyl alcohol polyglycol 100% Liquid max. 0,2% ca. 43,0 13 Exempted due 910, 930, 960
• • • • used as built-in-adjuvant or as a component of tank-mix adjuvants to ether with 6 EO • to polymer
increase wetting of the plant surface. status
Genapol ID 100 Genapol ID 100 is a wetting agent in SC formulations and can also be Iso-decyl alcohol polyglycol 100% Liquid -- ca. 85,0 14 Exempted due 910, 930, 960
• • • • • used as built-in-adjuvant or as a component of tank-mix adjuvants that ether with 10 EO • to polymer
is rapidly wetting the plant surface and can improve penetration. status
Genapol UD 050 The Genapol UD products are ethoxylates based on a branched fatty C11 oxo alcohol polyglycol 100% Liquid -- ca. 68,0 11 Exempted due 910, 930, 960
• • • • alcohol. The products exhibit good wetting and low-foaming ether with 5 EO • to polymer
characterics. status
Genapol UD 079 The Genapol UD products are ethoxylates based on a branched fatty C11 oxo alcohol polyglycol 90% Liquid ca. 10% ca. 53,5 13 Exempted due 910, 930, 960
alcohol. The products exhibit good wetting and low-foaming ether with 7 EO to polymer
• • • •
characterics. Genapol UD 079 is provided as an aqueous solution for status
easier handling.
Genapol UD 080 The Genapol UD products are ethoxylates based on a branched fatty C11 oxo alcohol polyglycol 100% Liquid -- ca. 63,5 13 Exempted due 910, 930, 960
• • • alcohol. The products exhibit good wetting and low-foaming ether with 8 EO • to polymer
characterics. status
Genapol XM 060 Genapol XM 060 is a methyl-end-capped ethoxylate based on Genapol Iso-tridecyl alcohol 100% Liquid max. 0,5% -- 11 Exempted due --
• • X 060 which can enable the formulation of very sensitive active ethoxylate methyl ether to polymer
ingredients in non-aqueous formulations like ECs and ODs. with 6 EO status
Genapol XM 150 Genapol XM 150 is a methyl-end-capped ethoxylate based on Genapol Iso-tridecyl alcohol 100% Wax-like max. 0,5% -- 15 Exempted due --
• • • X 060 which can enable the formulation of very sensitive active ethoxylate methyl ether to polymer
ingredients in non-aqueous formulations like ECs and ODs. with 15 EO status
Methyl oleyl taurate
Hostapon TPHC Hostapon TPHC shows both wetting and dispersing properties which Fatty acid methyl tauride 60-65% Powder max. 1,0% -- -- Registration 910, 930
• • makes it a versatile inert ingredient for many liquid and solid sodium salt required
formulations with an excellent toxicological and ecotoxicological profile.
Olefin sulfonate
Hostapur OS liq. Hostapur OS liq. is an aqueous solution of an alpha olefin sulfonate Alpha olefin sulfonate, 40% Liquid ca. 60% -- -- Registration 910
• •
and is used as anionic wetting agent in liquid formulations. sodium salt required
Hostapur OSB Hostapur OSB is a solid alpha olefin sulfonate and especially suitable Alpha olefin sulfonate, 90% Solid max. 2,0% -- -- Registration 920
• •
as anionic wetting agent for solid formulations. sodium salt required
25 26
Wetting agent
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Ether sulfate
Genapol LRO paste Genapol LRO is a standard wetting agent/adjuvant for tank-mix uses Alkyl ether sulfate, sodium 69% Paste ca. 30% -- -- Registration 910, 930
• • • and SL formulations of water-soluble herbicides like Glufosinate. salt required
Furthermore it is used as wetting agent in SCs or WGs.
Fatty alcohol alkoxylate
Genapol EP 0244 Genapol EP 0244 combines extremely low-foaming tendency with very Fatty alcohol alkoxylate 100% Liquid -- ca. 36,5 11 Exempted due 910, 930, 960
• • • low surface tension making it a powerful wetting agent in demanding • to polymer
environments. The product does not require a hazardous labeling. status
Genapol EP 2564 Genapol EP 2564 is an alkoxylate wetting agent which does not require Fatty alcohol alkoxylate 100% Liquid -- ca. 30,0 11 Exempted due 910, 930, 960
• • • a hazardous labeling. • to polymer
status
Genapol EP 2584 Genapol EP 2584 is an alkoxylate wetting agent which does not require Fatty alcohol alkoxylate 100% Liquid -- ca. 40,5 12 Exempted due 910, 930, 960
• • • a hazardous labeling. • to polymer
status
Synergen W 06 Synergen W 06 is an excellent wetting agent to be used in EC or SC Fatty alcohol alkoxylate 100% Liquid max. 0,5% ca. 60 13,5 Exempted due 910, 930, 960
• • • formulations or in tank-mix adjuvants to increase wetting of the plant • to polymer
surface. It does not require a hazardous labeling. status
Fatty alcohol ethoxylate
Genapol ID 060 Genapol ID 060 is a wetting agent in SC formulations and can also be Iso-decyl alcohol polyglycol 100% Liquid max. 0,2% ca. 43,0 13 Exempted due 910, 930, 960
• • • • used as built-in-adjuvant or as a component of tank-mix adjuvants to ether with 6 EO • to polymer
increase wetting of the plant surface. status
Genapol ID 100 Genapol ID 100 is a wetting agent in SC formulations and can also be Iso-decyl alcohol polyglycol 100% Liquid -- ca. 85,0 14 Exempted due 910, 930, 960
• • • • • used as built-in-adjuvant or as a component of tank-mix adjuvants that ether with 10 EO • to polymer
is rapidly wetting the plant surface and can improve penetration. status
Genapol UD 050 The Genapol UD products are ethoxylates based on a branched fatty C11 oxo alcohol polyglycol 100% Liquid -- ca. 68,0 11 Exempted due 910, 930, 960
• • • • alcohol. The products exhibit good wetting and low-foaming ether with 5 EO • to polymer
characterics. status
Genapol UD 079 The Genapol UD products are ethoxylates based on a branched fatty C11 oxo alcohol polyglycol 90% Liquid ca. 10% ca. 53,5 13 Exempted due 910, 930, 960
alcohol. The products exhibit good wetting and low-foaming ether with 7 EO to polymer
• • • •
characterics. Genapol UD 079 is provided as an aqueous solution for status
easier handling.
Genapol UD 080 The Genapol UD products are ethoxylates based on a branched fatty C11 oxo alcohol polyglycol 100% Liquid -- ca. 63,5 13 Exempted due 910, 930, 960
• • • alcohol. The products exhibit good wetting and low-foaming ether with 8 EO • to polymer
characterics. status
Genapol XM 060 Genapol XM 060 is a methyl-end-capped ethoxylate based on Genapol Iso-tridecyl alcohol 100% Liquid max. 0,5% -- 11 Exempted due --
• • X 060 which can enable the formulation of very sensitive active ethoxylate methyl ether to polymer
ingredients in non-aqueous formulations like ECs and ODs. with 6 EO status
Genapol XM 150 Genapol XM 150 is a methyl-end-capped ethoxylate based on Genapol Iso-tridecyl alcohol 100% Wax-like max. 0,5% -- 15 Exempted due --
• • • X 060 which can enable the formulation of very sensitive active ethoxylate methyl ether to polymer
ingredients in non-aqueous formulations like ECs and ODs. with 15 EO status
Methyl oleyl taurate
Hostapon TPHC Hostapon TPHC shows both wetting and dispersing properties which Fatty acid methyl tauride 60-65% Powder max. 1,0% -- -- Registration 910, 930
• • makes it a versatile inert ingredient for many liquid and solid sodium salt required
formulations with an excellent toxicological and ecotoxicological profile.
Olefin sulfonate
Hostapur OS liq. Hostapur OS liq. is an aqueous solution of an alpha olefin sulfonate Alpha olefin sulfonate, 40% Liquid ca. 60% -- -- Registration 910
• •
and is used as anionic wetting agent in liquid formulations. sodium salt required
Hostapur OSB Hostapur OSB is a solid alpha olefin sulfonate and especially suitable Alpha olefin sulfonate, 90% Solid max. 2,0% -- -- Registration 920
• •
as anionic wetting agent for solid formulations. sodium salt required
25 26
Wetting agent
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Sulfosuccinate
Emulsogen SF 8 Emulsogen SF 8 is an aqueous solution of a dioctyl sulfosuccinate and Aqueous solution of sodium 50% Liquid ca. 50% -- -- Registration 910, 930
• • •
is mainly used as anionic wetting agent. dioctyl sulfosuccinate required
Synergen W 03 Synergen W 03 is a diocty sulfosuccinate in a non-water miscible Sodium salt of a diester of 64% Liquid max. 0,3% -- -- Registration 910
• • solvent. The product is used as anionic emulsifier of wetting / sulphosuccinic acid in required
dispersing agent in EC, EW, SE and OD formulations. aromatic solvent
27 28
Wetting agent
Formulation type Cloud point method Regulatory Status
Water Dispersible Granules (WG)
Emulsifiable Concentrate (EC)
1% active ingredient in water
Suspension Concentrate (SC)
Water Soluble Granules (SG)
Emulsion oil in Water (EW)
EPA exempted
1g/ 100 ml/ 10% NaCl
Active
Suspo-Emulsion (SE)
Water Cloud Point HLB from tolerance
5g / 25g/ 25% BDG
Oil Dispersion (OD)
Soluble Liquid (SL)
Product Name Product description Product composition content Appearance Reach Status
content [°C] (calc.) under 40 CFR
[%]
§ 180.xxx
Sulfosuccinate
Emulsogen SF 8 Emulsogen SF 8 is an aqueous solution of a dioctyl sulfosuccinate and Aqueous solution of sodium 50% Liquid ca. 50% -- -- Registration 910, 930
• • •
is mainly used as anionic wetting agent. dioctyl sulfosuccinate required
Synergen W 03 Synergen W 03 is a diocty sulfosuccinate in a non-water miscible Sodium salt of a diester of 64% Liquid max. 0,3% -- -- Registration 910
• • solvent. The product is used as anionic emulsifier of wetting / sulphosuccinic acid in required
dispersing agent in EC, EW, SE and OD formulations. aromatic solvent
27 28
You might also like
- MTI Publication 34 - Guidelines - For - The - Mothballing - of - Process - PlantsNo ratings yetMTI Publication 34 - Guidelines - For - The - Mothballing - of - Process - Plants144 pages
- Silwet Adjuvants SAG Antifoams: Inventing PossibilitiesNo ratings yetSilwet Adjuvants SAG Antifoams: Inventing Possibilities12 pages
- CRODA Surfactants and Alkoxylated Polyols Overview FEB 2013No ratings yetCRODA Surfactants and Alkoxylated Polyols Overview FEB 20138 pages
- Clariant Brochure Crop Protection 2010 ENNo ratings yetClariant Brochure Crop Protection 2010 EN28 pages
- Stepan Coca Mi Dede A Replacements Hard Surface Care100% (1)Stepan Coca Mi Dede A Replacements Hard Surface Care2 pages
- 2008 CropProtection Newsroom Brochures CropProtectionProductRange0% (1)2008 CropProtection Newsroom Brochures CropProtectionProductRange19 pages
- Agnique PG 8105-G: Technical InformationNo ratings yetAgnique PG 8105-G: Technical Information4 pages
- Ask Us For Your Solutions: Agricultural Solutions - Product Portfolio South AmericaNo ratings yetAsk Us For Your Solutions: Agricultural Solutions - Product Portfolio South America3 pages
- Atlox™ 4913 Graft Comb' Copolymer: Dispersant For Aqueous Suspension Concentrates100% (3)Atlox™ 4913 Graft Comb' Copolymer: Dispersant For Aqueous Suspension Concentrates2 pages
- Brochure Cleaning Choice of Hydrotope Global enNo ratings yetBrochure Cleaning Choice of Hydrotope Global en4 pages
- Crop Protection Pesticide Formulations No. 921revNo ratings yetCrop Protection Pesticide Formulations No. 921rev8 pages
- 119 02373 01 Dow Crop Defense Formulations Guide100% (1)119 02373 01 Dow Crop Defense Formulations Guide75 pages
- Eco-Friendly Hydrotropes: More Than Just Keeping Your Formulation TogetherNo ratings yetEco-Friendly Hydrotropes: More Than Just Keeping Your Formulation Together15 pages
- Specialty Phosphate Esters Selector Guide: ME FormulationsNo ratings yetSpecialty Phosphate Esters Selector Guide: ME Formulations1 page
- Aerosol Ot Surfactant: Applicationbulletin SpecialtyadditivesNo ratings yetAerosol Ot Surfactant: Applicationbulletin Specialtyadditives7 pages
- Aqeous Dispersant Product Guide 4pp 07 19 v3No ratings yetAqeous Dispersant Product Guide 4pp 07 19 v34 pages
- CCD059 Formulating With Water Sensitive HerbicidesNo ratings yetCCD059 Formulating With Water Sensitive Herbicides6 pages
- Chapter 3 - Emulsifiable Concentrates (EC)No ratings yetChapter 3 - Emulsifiable Concentrates (EC)4 pages
- Boiler Heat Balance Sample Calculation Power Plant Design100% (1)Boiler Heat Balance Sample Calculation Power Plant Design3 pages
- 119 02408 01 Dow Agrochemical Application Selection GuideNo ratings yet119 02408 01 Dow Agrochemical Application Selection Guide16 pages
- Clariant Brochure Emulsion Polymerization Range of Surfactants ENNo ratings yetClariant Brochure Emulsion Polymerization Range of Surfactants EN8 pages
- Density, (Relative Density) Specific Gravity & Absorption of Coarse Aggregate (ASTM C127 - 04)No ratings yetDensity, (Relative Density) Specific Gravity & Absorption of Coarse Aggregate (ASTM C127 - 04)13 pages
- Finite-Element Simulation of Dimensional Limitation of Electro Chemical Machining (ECM) ProcessNo ratings yetFinite-Element Simulation of Dimensional Limitation of Electro Chemical Machining (ECM) Process5 pages
- Chemical Composition and Element Distribution in The Earths Crust (Taylor Stuart Ross, McLennan Scott M.) PDF100% (1)Chemical Composition and Element Distribution in The Earths Crust (Taylor Stuart Ross, McLennan Scott M.) PDF23 pages
- A. Experiment Title: Hydrogen & Oxygen B. Experiment PourposeNo ratings yetA. Experiment Title: Hydrogen & Oxygen B. Experiment Pourpose12 pages
- Seed Extracts of Gleditsia Triacanthos: Functional Properties Evaluation and Incorporation Into Galactomannan FilmsNo ratings yetSeed Extracts of Gleditsia Triacanthos: Functional Properties Evaluation and Incorporation Into Galactomannan Films8 pages
- ADAPTADA Minimalist Aesthetic Consulting Toolkit by SlidesgoNo ratings yetADAPTADA Minimalist Aesthetic Consulting Toolkit by Slidesgo73 pages
- Synthesis and Characterization of A Concrete Based On Metakaolin GeopolymerNo ratings yetSynthesis and Characterization of A Concrete Based On Metakaolin Geopolymer5 pages
- N 08917 Paper II Environmental Science Nov 17No ratings yetN 08917 Paper II Environmental Science Nov 178 pages
- Power Factor Profile of Nio: Smita Jain, Dr. Purnima SwarupNo ratings yetPower Factor Profile of Nio: Smita Jain, Dr. Purnima Swarup3 pages
- Wafer Level Variability Improvement by Spatial Source Drain Activation and Ion Implantation Super Scan For FinFET TechnologyNo ratings yetWafer Level Variability Improvement by Spatial Source Drain Activation and Ion Implantation Super Scan For FinFET Technology5 pages
