SPFSC MathswithCalculus Syllabus 2020
SPFSC MathswithCalculus Syllabus 2020
ASSESSMENT PROGRAMME
[EQAP]
The Office of the Educational Quality and Assessment Programme (EQAP) is located at:
1
SOUTH PACIFIC FORM SEVEN CERTIFICATE
MATHEMATICS with CALCULUS
Contents
PREAMBLE AND RATIONALE ................................................................................................................. 4
COURSE AIM ............................................................................................................................................... 4
PREREQUISITES ......................................................................................................................................... 4
GENERAL OBJECTIVES ............................................................................................................................ 4
CONTENT COMPONENTS ......................................................................................................................... 5
UNPACKING LEARNING OUTCOMES ................................................................................................... 5
LEARNING OUTCOMES ............................................................................................................................ 7
STRAND 1.0 ALGEBRA ....................................................................................................................... 7
SUB-STRAND 1.1 Algebra Basic Skills .............................................................................................. 7
SUB-STRAND 1.2 Polynomial and Non- Linear Equations ................................................................ 8
SUB-STRAND 1.3 Complex numbers .................................................................................................. 8
STRAND 2.0 TRIGNONOMETRY ..................................................................................................... 10
SUB-STRAND 2.1 Trigonometry Basic Skills ................................................................................... 10
SUB-STRAND 2.2: Trigonometric functions to solve problems ........................................................ 10
SUB-STRAND 2.3: Prove Trigonometric identities ........................................................................... 11
STRAND 3.0 DIFFERENTIATION ................................................................................................... 12
SUB-STRAND 3.1 Differentiation Basic Skills.................................................................................. 12
SUB-STRAND 3.2 Discontinuity and limits of functions .................................................................. 12
SUB-STRAND 3.3 Application of differentiation technique .............................................................. 13
SUB-STRAND 3.4 Differentiate to solve problems by sketching graphs .......................................... 13
STRAND 4.0: INTEGRATION ........................................................................................................... 14
SUB-STRAND 4.1: Integration Basic Skills ....................................................................................... 14
SUB-STRAND 4.2: Use of variety of integration techniques ............................................................. 14
SUB-STRAND 4.3: Integration: Volumes of solids of revolution ...................................................... 15
SUB-STRAND 4.4: Form and interpret solutions of differential equations ....................................... 15
ASSESSMENT ............................................................................................................................................ 17
Suggested Teaching Time and Weightings ............................................................................................. 17
Assessment Blueprint .............................................................................................................................. 18
External Assessment ................................................................................................................................ 18
Internal Assessment ................................................................................................................................. 19
IA TASK 1 Instructions ........................................................................................................................ 20
IA TASK 2 Instructions ........................................................................................................................ 21
2
IA TASK 3 Instructions ........................................................................................................................ 22
APPENDICES ............................................................................................................................................. 27
Appendix 1: Sample TASK Scoring Rubrics .......................................................................................... 27
Appendix 2: IA Program Proposal Template .......................................................................................... 28
Appendix 3: List of useful formulae and tables ....................................................................................... 31
Appendix 4: IA Program Summary Form ............................................................................................... 34
Appendix 5: Electronic calculators in examinations ............................................................................... 35
General Policy...................................................................................................................................... 35
Information for Students ...................................................................................................................... 36
Calculators ........................................................................................................................................... 36
ADVISORY SECTION ............................................................................................................................... 37
Suggested Texts ....................................................................................................................................... 37
Websites ................................................................................................................................................... 37
3
MATHEMATICS with CALCULUS
PREAMBLE AND RATIONALE
This syllabus defines the requirements for the South Pacific Form Seven Certificate Mathematics (with
Calculus) qualification.
There are explanatory notes provided below the table of specific learning outcomes in some strands. The
specific learning outcomes in these strands are to be read in conjunction with these notes. Students also
require knowledge and understanding of outcomes from the national Year 12 or Form 6 qualification or its
equivalent, which are related to the specific outcomes of SPFSC Mathematics Calculus.
This syllabus subsumes/replaces all previous EQAP Mathematics with Calculus syllabus. The content and
outcomes of the subject are aligned to the New Zealand National Certificate of Educational Assessment
(NCEA) Level 3 Mathematics (with Calculus) Achievement Standards as published by New Zealand
Qualifications Authority (NZQA).
The course is designed for students who wish to undertake university studies in mathematics and other
related fields.
COURSE AIM
Students undertaking this course are expected to:
• demonstrate mathematical skills, concepts and understanding of the mathematical processes, required
for Measurement, Calculus, Trigonometry and Algebra at a level that is equivalent to that required for
any Form 7 qualification or its equivalents including the NZ Universities Entrance, NCEA Level 3,
University of the South Pacific (USP) Foundation , etc.
• apply these skills, concepts, and understanding to familiar and unfamiliar problems arising in real and
simulated situations.
• demonstrate the ability to select and use appropriate mathematical techniques for problem solving.
• demonstrate the ability to reason logically and systematically.
• demonstrate the ability to communicate mathematical ideas.
PREREQUISITES
Students taking this course are expected to have successfully completed the national Year 12 Senior
Secondary Certificate Mathematics course or its equivalent.
GENERAL OBJECTIVES
In a range of meaningful contexts, students will be engaged in thinking mathematically. They will solve
problems and model situations that require them to:
1. apply algebraic techniques to real and complex numbers.
2. use and manipulate trigonometric functions and expressions.
3. demonstrate knowledge of basic and advanced concepts and techniques of differentiation and
integration.
4
CONTENT COMPONENTS
The content of the SPFSC Mathematics with Calculus course is organised under four strands and a
number of sub-strands under each strand. These are outlined below:
Sub External /
Strand
Strand Title strand Sub-strand title Internal
Number
number Assessment
1.1 Algebra basic skills External and
Internal
1.0 Algebra 1.2 Polynomial and non-linear equation External
1.3 Complex numbers External
2.1 Trigonometry basic skills External and
Internal
2.2 Trigonometric functions to solve External and
2.0 Trigonometry problems Internal
2.3 Trigonometric identities External and
Internal
3.1 Differentiation basic skills External
3.2 Discontinuity and limits of functions External
3.0 Differentiation 3.3 Application of differentiation Internal
3.4 Differentiate by sketching to solve External
problems
4.1 Integration basic skills External
4.2 Use of variety of integration technique Internal
4.0 Integration 4.3 Volumes of solids of revolution External
4.4 Form and interpret solutions External
The SOLO taxonomy provides a simple, reliable and robust model for three levels of understanding –
surface, deep, and conceptual (Biggs and Collis 1982).
L0 L1 L2 L3 L4
1
Structure of Observed Learning Outcomes by Biggs and Collis (1982)
5
At the prestructural level (L0) of understanding, the task is inappropriately attacked, and the student has
missed the point or needs help to start. The next two levels, unistructural and multistructural are associated
with bringing in information (surface understanding). At the unistructural level (L1), one aspect of the
task is picked up, and student understanding is disconnected and limited. The jump to the multistructural
level is quantitative. At the multistructural level (L2), several aspects of the task are known but their
relationships to each other and the whole are missed. The progression to relational and extended abstract
outcomes is qualitative. At the relational level (L3), the aspects are linked and integrated, and contribute
to a deeper and more coherent understanding of the whole. At the extended abstract level (L4), the new
understanding at the relational level is re-thought at another conceptual level, looked at in a new way, and
used as the basis for prediction, generalisation, reflection, or creation of new understanding (adapted from
Hook and Mills 2011). [http://pamhook.com/solo-taxonomy/.. ]
The progression from Level 1 to Level 4 is exemplified in the progression from define →describe →
explain → discuss with each succeeding level indicating a higher level of understanding, as follows:
6
LEARNING OUTCOMES
STRAND 1.0 ALGEBRA
Major Learning Outcome
Students are able to think mathematically and statistically and will be able to solve problems and model
situations that require them to apply algebraic techniques to real and complex numbers.
7
SUB-STRAND 1.2 Polynomial and Non- Linear Equations
Key Learning Outcome
Students are able to form and use polynomial and non-linear equations.
No. Specific Learning Outcomes Skill SLO Code
Students are able to: Level
1 determine the variables in a contextual problem 1 Cal1.2.1.1
2 form equations based on a contextual problem 2 Cal1.2.2.1
3 solve problems that require translating word problems into simple mathematical 3 Cal1.2.3.1
expressions, involving two variables and two or three equations
4 solve problems that require translating word problems into complex mathematical 4 Cal1.2.4.1
expressions involving three variables and two or three equations
5 analyse the existence of solutions in the context of a simple situation involving word 3 Cal1.2.3.2
problems.
6 analyse the existence of solutions in the context of a complex situation involving 4 Cal1.2.4.2
word problems.
7 solve linear equations 1 Cal1.2.1.2
8 solve simultaneous equations, where one equation is linear and the other a quadratic 3 Cal1.2.3.3
or cubic function
9 solve exponential equations that include expressing negative powers with positive 1 Cal1.2.1.3
exponents
10 solve exponential equations that include applying the laws of indices 1 Cal1.2.1.4
11 solve exponential equations That can be expressed with the same base but different 2 Cal1.2.2.2
powers e.g 22x = 4x + 1
12 solve logarithmic equations, involving single logs, and addition and subtraction of 2 Cal1.2.2.3
logs
13 solve logarithmic equations involving the application of log rules of bringing down 3 Cal1.2.3.4
power as a coefficient.
14 solve rational equations 3 Cal1.2.3.5
15 solve surd equations, including simplifying surds, expanding surds and writing surds 2 Cal1.2.2.4
in simplest forms
16 solve surd equations, including rationalizing the denominator 3 Cal1.2.3.6
17 solve hyperbolic equations 2 Cal1.2.2.6
18 use Remainder and Factor theorems involving straight forward substitution method 2 Cal1.2.2.5
and long division
19 use Remainder and Factor theorems to completely factorise a polynomial equation of 3 Cal1.2.3.7
degree 3
20 use Remainder and Factor theorems to find unknowns in a polynomial equation 4 Cal1.2.4.3
21 Solve a simultaneous system involving a hyperbolic function and a linear function 4 Cal1.2.4.4
4 use Argand diagrams to represent complex number in the forms a + ib , rcis θ 1 Cal1.3.1.3
The Argand diagram is either represented as an intercept on the x-axis or y-axis.
8
It has only ONE representation. It has ONLY a Real component or ONLY an
imaginary, i.e. 𝑍 = 4𝑖 𝑜𝑟 𝑍 = 2
5 use Argand diagrams to represent complex number in the forms a + ib , rcis θ 2 Cal1.3.2.2
The Argand diagram is plotted as a point on any of the four quadrants.
Example: It has BOTH a Real and Imaginary component, i.e. 𝑍 = −2 + 3𝑖
6 Interpret, manipulate and use graphical representations of complex numbers, using 2 Cal1.3.2.3
polar and rectangular form on an Argand diagram. These problems include a point
on the complex plane can be written in rectangular or polar form.
7 Interpret, manipulate and use graphical representations of complex numbers, using 3 Cal1.3.3.1
polar and rectangular form on an Argand diagram. These problem include regions
that are shaded on a line (𝑎 ≤ 𝑅𝑒/𝐼𝑚(𝑍) ≤ 𝑏) that can be linked back to its
rectangular or polar form.
8 interpret manipulate and use graphical representations of complex numbers, using 4 Cal1.3.4.1
polar and rectangular form on an Argand diagram. (These problems include a region
involving a circle that can be linked back to its rectangular/polar form. E.g. −2 ≤
|𝑧| < 1 )
9 find roots over the complex number system for polynomial equations with real 2 Cal1.3.2.4
coefficients, including the special case of the nth roots of a that come from solving
equations of the form zn = a, making links with their graphs.
(The equation of the complex number has only a Real component or Imaginary
component, but not both. Example: Z = 2 or Z = -i )
10 find roots over the complex number system for polynomial equations with real 3 Cal1.3.3.2
coefficients, including the special case of the nth roots of a that come from solving
equations of the form zn = a, making links with their graphs.
(The equation of the complex number has both Real and Imaginary components and
both components are whole numbers. Example: Z = -3 + 2i )
11 find roots over the complex number system for polynomial equations with real 3 Cal1.3.3.3
coefficients, including the special case of the nth roots of a that come from solving
equations of the form zn = a, making links with their graphs.
(The equation of the complex number has both Real and Imaginary components. One
of the components must include a rational/surd. Example: Z = √2 + 2𝑖 )
12 find roots of equations of the form zn = a + ib, zn = r cis θ where n is a positive 4 Cal1.3.4.2
integer (includes the use of de Moivre’s theorem to solve equations and Argand
diagrams to represent relationships between solutions)
(This includes any roots from 9 – 11 above that are to be sketched on an Argand
diagram.)
Explanatory Notes
The outcomes listed above require that students
• have an understanding of the need and relevance of different number systems leading to the
development of i and complex numbers
• carry out mathematical operations on expressions incorporating i, eg. powers of i
• convert between rectangular and polar form
• carry out operations on rcisθ
• use de Moivre’s theorem to solve equations of the form zn = a and display these solutions
9
STRAND 2.0 TRIGNONOMETRY
Major Learning Outcome
Students are able to think mathematically by solving problems and model situations that require them to
use and manipulate trigonometric functions and expressions.
A complex manipulation of trig expressions involves a three step procedure to arrive at a possible
solution. The equation to be solved is equal to a value other than 0, ½ or 1 and thus need the
manipulation of the inverse trig function first in order to arrive at possible angles.
1 solve straightforward problems with models involving trigonometric functions of the 3 Cal2.2.3.1
form; y = A sin B (x + C) + D where C or D may be zero
2 solve straightforward problems with models involving trigonometric functions of the 3 Cal2.2.3.2
form; y = A cos B (x + C) + D where C or D may be zero
3 solve straightforward problems with models involving trigonometric functions of the 3 Cal2.2.3.3
form; y = A tan B (x + C) + D where C or D may be zero
10
4 form an equation for a model and use the model to solve problems; 4 Cal2.2.3.4
y = A sin B (x + C) + D
5 form an equation for a model and use the model to solve problems 4 Cal2.2.3.5
y = A cos B (x + C) + D
Explanatory Notes
The above outcomes refer to trigonometric functions where C or D may be zero. Solutions of the problems may
require knowledge of amplitude, period and frequency.
11
STRAND 3.0 DIFFERENTIATION
Major Learning Outcome
Students are able to solve problems and model situations that require them to demonstrate knowledge of
advanced concepts and techniques of differentiation.
12
SUB-STRAND 3.3 Application of differentiation technique
Key Learning Outcome
Students are able to apply a variety of differentiation technique to functions and relations.
No. Specific Learning Outcomes Skill SLO Code
Students are able to: Level
1 use implicit differentiation or parametric differentiation to differentiate simple 3 Cal3.3.3.1
functions (functions include: polynomials, and trigonometric functions )
2 use implicit differentiation or parametric differentiation to differentiate complex 4 Cal3.3.4.1
functions (functions include: Aepx, ln(ax +b), power functions such as Apx )
3 use a range of differentiation techniques to find an equation of a tangent or normal 3 Cal3.3.3.2
4 use a range of differentiation techniques to solve optimization of simple functions 2 Cal3.3.2.1
(maxima, minima or point of inflection) linked to only one differentiation,
𝑓(𝑥) → 𝑓 ′ (𝑥) .
5 use a range of differentiation techniques to solve optimization problems (maxima, 3 Cal3.3.3.3
minima or point of inflection) that are linked to two differentiations, 𝑓(𝑥) → 𝑓 ′ (𝑥) →
𝑓 ′′ (𝑥)
6 use a range of differentiation techniques to solve optimization problems (maxima, 4 Cal3.3.4.2
minima or point of inflection) that involve many overlapping equations or equations
to be differentiated are not obviously stated.
7 use differentiation to find the rates of change involving simple and straight forward 2 Cal3.3.2.2
equations
8 use differentiation to find the rates of change, using the Chain rule. 3 Cal3.3.3.4
9 use differentiation to find the rates of change, that uses the Chain rule with two 4 Cal3.3.4.3
variables involved. The relationship of both variables is given in the problem.
10 use differentiation to solve simple problems in kinematics, e.g. in relation to 2 Cal3.3.2.3
projectile motions etc. where time and distances are to be found, or one level of
differentiation e.g. from d(t) → v(t), and substitution of time may not be necessary.
11 use differentiation to solve problems in kinematics, e.g. in relation to projectile 3 Cal3.3.3.5
motions etc. where descriptions of motion are involved, as in 𝑑(𝑡) → 𝑣(𝑡) 𝑜𝑟 𝑣(𝑡) →
𝑎(𝑡) and values of time are substituted
12 apply differentiation to problems in kinematics in which “2 derivatives” or 2nd 4 Cal3.3.4.4
differentiation applies, e.g. 𝑑(𝑡) → 𝑓𝑖𝑛𝑑 𝑎(𝑡), and values of t are to be substituted
13
STRAND 4.0: INTEGRATION
Major Learning Outcome
Students are able to solve problems and model situations that require them to demonstrate knowledge of
advanced concepts and techniques of integration.
1 use and apply numerical methods to find areas under the curves functions include 3 Cal4.2.3.1
polynomials, xn,n∈ R, ex , sin(x), cos(x),
𝑓 ′ (𝑥)
f ‘(g(x)).g’ (x),
𝑓(𝑥)
2 use and apply numerical methods to find areas between the curves including 4 Cal4.2.4.1
polynomials, xn,n∈ R, ex , sin(x), cos(x),
𝑓 ′ (𝑥)
f ‘(g(x)).g’ (x),
𝑓(𝑥)
3 find area for odd, even and periodic functions 3 Cal4.2.3.2
4 apply anti-differentiation to problems in kinematics. Any question that only involves 2 Cal4.2.2.1
substitution of “time”, but no integration, i.e. substituting “t” into the formula. Initial
(t=0) or t = a
5 apply anti-differentiation to solve word problems in kinematics, involving the 3 Cal4.2.3.3
application of one level of integration, e.g. 𝑎(𝑡) → 𝑣(𝑡) 𝑜𝑟 𝑣(𝑡) → 𝑑(𝑡)
6 apply anti-differentiation to solve word problems in kinematics, involving the 4 Cal4.2.4.2
application of two levels of integration e.g. 𝑎(𝑡) → 𝑓𝑖𝑛𝑑 𝑑(𝑡)
7 find area of kinematic equations 3 Cal4.2.3.4
Explanatory Notes:
1. integration by substitution is restricted only to those involving simple algebraic substitutions
2. integration using partial fraction is to be used as an alternative method of integration for students to use where
appropriate, but are not tested directly in this syllabus
14
SUB-STRAND 4.3: Integration: Volumes of solids of revolution
Key Learning Outcome
Students are able to use integration to find the volumes of solids of revolution.
No. Specific Learning Outcomes Skill SLO Code
Students are able to: Level
1 use of integration to find volumes of revolution of simple function (such as y = axn) 3 Cal4.3.3.1
and around an axis parallel to the x or y axis.
2 use of integration to find volumes of revolution of complex function (such as 4 Cal4.3.4.1
exponential or trig function) and around an axis parallel to the x or y axis, and limits of
integration are not obvious in the problem.
3 use of integration to find volumes of revolution of area between two functions (linear, 4 Cal4.3.4.2
trigonometric, quadratic, exponential, logarithmic, hyperbola), and in which the limits
of integration are obvious in the problem.
Explanatory notes
1. Simple functions do not involve sums, products, or combinations of the standard functions other than
expressions such as ax² + bx + c or A - e ax .
2. Complex functions are those that do involve sums, products and combinations of the standard functions.
3. For areas between two function (as in SLO3 above, L4), the limits of integration are obvious in the problem.
1 use anti-differentiation to form and solve simple differential equations with the rate of Cal4.4.3.1
change directly or inversely proportional to the variable of interest (functions include: 3
polynomials, ex, ln(x), trig functions, xn ,n∈ R)
2 use anti-differentiation to form and solve complex differential equations with the rate Cal4.4.4.1
of change directly or inversely proportional to the variable of interest (functions 4
include: polynomials, ex, ln(x), trig functions, xn ,n∈ R)
3 use anti-differentiation to form and solve differential equations of first order only with Cal4.4.2.1
variables easily separated (functions include: polynomials, ex, ln(x), trig functions, xn 2
,n∈ R)
4 use anti-differentiation to form and solve simple differential equations of first and Cal4.4.3.2
second order with variables easily separated (functions include: polynomials, ex, ln(x), 3
trig functions, xn ,n∈ R)
5 use anti-differentiation to form and solve complex differential equations of first and Cal4.4.4.2
second order with variables easily separated (functions include: polynomials, ex, ln(x), 4
trig functions, xn ,n∈ R)
6 form differential equations of the type with the rate of change directly proportional to Cal4.4.2.2
the variable of interest (functions include: polynomials, ex, ln(x), trig functions, xn ,n∈ 2
R)
7 solve differential equations of the first order type with variables easily separated 3 Cal4.4.3.3
15
Explanatory notes
Student applies boundary or initial conditions to solutions of differential equations. Student are expected to
distinguish between families of solutions and exact solutions using given boundary or initial conditions and
interprets these solutions.
𝑑2 𝑦
= 𝑝𝑜𝑙𝑦𝑛𝑜𝑚𝑖𝑎𝑙
𝑑𝑥 2
𝑑𝑦
= 𝑒𝑥
𝑑𝑥
𝑑𝑦 1
=
𝑑𝑥 𝑥
Situations which students will be expected to form a model for and solve include:
𝑑𝑦
Growth and decay = 𝑘𝑦
𝑑𝑥
𝑑𝑇
Newton’s law of cooling = 𝑘(𝑇 −T0)
𝑑𝑡
Kinematics
Explanatory Notes
Once solutions to differential equations are available students are required to:
16
ASSESSMENT
Assessment in Mathematics Calculus course is in two parts:
1. External Assessment (EA) is worth 60.
2. Internal Assessment (IA) is worth 40.
The principal, or his/her nominee, will certify a proposed IA programme for the course. This is to be
submitted to EQAP early in the year.
The Principal, or his nominee, will also certify that the internal assessment requirements have been fulfilled.
17
Assessment Blueprint
External Assessment
The syllabus contains the Major Learning Outcome (MLO), the Key Learning Outcome (MLO) and the
Specific Learning Outcomes.. Examination questions, which require specific mathematical knowledge, will
be based on these specific outcomes.
The external assessment will contribute 60% of the final grade. The table below gives an approximate
weighting for each major learning outcome in the examination. This is based on the the distribution of
learning outcomes for each strand. The four strands in the syllabus are reflected in the examination paper,
and students will be given 3 hours (plus 10 minutes of reading time) for the examination.
Outcomes
Percentage Suggested
Strand
In a range of meaningful contexts, students are able per section Exam Time
to solve problems and model situations that require
them to:
1 Algebra: Apply algebraic techniques to real and complex 20% 60 mins
numbers.
2 Trigonometry Use trigonometric functions as well as apply its 10% 30 mins
relationships to solve problems.
3 Differentiation: Demonstrate knowledge of advanced concepts and 15% 45 mins
techniques of differentiation.
4 Integration: Demonstrate knowledge of advanced concepts and 15% 45 mins
techniques of integration.
18
Internal Assessment
The four IA tasks are Common Assessment Tasks (CATs), and they assess the specific learning outcomes
(SLOs) indicated. The task instructions for each task are provided below.
SOLO LEVELS
TOPICS Task No. Assessment Type Weighting
Level Level Level Level
1 2 3 4
TASK 1 INDIVIDUAL 2 2
ALGEBRA 10
ASSIGNMENT 4 6
TASK 2 GROUP 2 2
TRIGNOMETRY 10
TASK 4 6
TASK 3 PRACTICAL 2 2
DIFFERENTIATION 10
ACTIVITY 4 6
TASK 4 GROUP 2 1
INTEGRATION 10
TASK 6 4
19
IA TASK 1 Instructions
TASK 1
The concepts of binomial expansion, mathematical induction and partial fractions are often given a lot of
emphasis by teachers and students. This emphasis reflects a similar level of emphasis given to these in the
Year 13 modules in the USP Foundation programme. The inclusion of a task on these three concepts gives
recognition to this emphasis. The inclusion of an IA task on Strand 1 also gives recognition to the large
number of SLOs within this strand.
TASK DESCRIPTION
This is an INDIVIDUAL ASSIGMENT. Students can discuss the content amongst themselves in class, or
in their groups – but each student is to submit his or her own answer paper to the teacher by the due date.
The idea is to have collaboration and interactive discussions, whereby the teacher moves around as a
facilitator to see that constructive discussions are carried out, thus providing opportunities for students to
learn from each other as well as from their teacher. The idea is centred on PEER TUTORING, whereby
students themselves come up with ways to answer the questions in the Assignment, rather than relying on
the teacher for their source. Teachers must refrain from providing direct answers to students, and also to
see that students do not end up plagiarizing or copying each other’s work.
-It is recommended that one full week of 5 - 6 lessons are dedicated to this task, and that the teacher collects
student worksheets at the end of the week.
The task document itself with the scoring rubric will be provided from EQAP at the appropriate point in
time, so teachers will be responsible for the implementation within the specifications provided above and
for the scoring. However, teachers are advised to prepare worksheets based on the learning outcomes for
this task for students to work on to provide them with the experience and skills that they will need for the
actual task, as well as for the final examination.
The learning outcomes for Task 1 are taken from Strand 1, sub-strand 1.1
20
IA TASK 2 Instructions
TASK 2
The Specific Learning Outcomes for Task 2 are taken from Strand 2, sub-strands 2.1 and 2.3. This task,
together with the scoring rubric, will be provided from EQAP at the appropriate time in the year. Teachers
will be responsible for the implementation within the specification provided below, as well as for the
scoring of student responses. The scoring rubric will also be provided from EQAP.
Proving identities is a high level mathematical skill that involves manipulation of multiple possibilities, so
it augurs well to be attempted as an assignment or task, rather than be attempted as items in a written timed
test.
Task Specifications:
1. The task is a group task, and the teacher is to allocate students into their respective groups of two or
three. A group of 4 may be necessary in some situations but it will end up being a large group, so
teachers are cautioned about organising students into groups of 4s.
2. The SLOs that are to be targeted in this task are taken from Strand 2. Teachers are hereby advised to
create worksheets for students that contain items that suit those learning outcomes, to give students
much needed practice in manipulation of trig identities and other basic trig skills so that they gain the
skills necessary for the completion of this task as well as similar items that may appear in the final
examination.
3. The actual task document as well as the scoring rubric will be sent to schools from EQAP at the
appropriate point in the year. . This is very important for teachers to note.
4. There will be ONE common version of Task 2 and teachers are to give this to each group. Students
are to be encouraged to work collaboratively in solving the task problems; however, each student is to
submit individual papers to the teacher for scoring.
5. Students are to be given time in-class to work on their task. At the end of each class time, the teacher is
to collect the students’ work and return the same to them to work on during the next class time. In this
way, the efforts of students is more meaningful and fairer. Teachers are to make independent decisions
about allocation of scores for students who are absent during lessons in which groups are working on
their tasks.
6. It is expected that students spend about 5 - 6 lessons on this task.
7. Teachers are to refer to the scoring rubric provided from EQAP and follow this closely when scoring
students’ responses to Task 1.
21
IA TASK 3 Instructions
Task 3 is worth 10%. The task is based on Strands 3.
TASK 3
DIFFERENTIATION
This task is designed to see how students can use differentiation and integration in real life application
problems in the area of kinematics.
Task 3.
The focus of this task is the real-life applications in the kinematic area of projectile motions, using
differentiation of basic trig functions. A demonstration is provided in the chart below. .
The idea behind this task, is to transition away from having a pen-to-paper test, and apply the concept
using a real-life situation, that could be contextualised to any setting the student is exposed to.
For instance, applying projectile motion to:
22
• Throwing a spear in fishing or pig hunting.
• Catapulting a stone (or bird) using a sling, as in the “Angry Birds” application on smart phones.
23
The key idea is to contextualise the task activity, so students can relate to a real life application of
mathematics in the form of integration and/or differentiation related to projectile motions.
Task 3 is a school based task with a Common Assessment Frame. The common frame is that the chosen
activity is to deal with projectile motions but the actual choice of the type of projectile motion (e.g. soccer
or basketball or throwing a spear or catapulting a stone) from which measurements are to be taken is left to
teachers and students to decide. Detailed task instructions and the scoring rubric will be provided from
EQAP at the appropriate point in the year, and will have the following features:
1. Task 3 is based on learning outcomes in Strands 3 (Differentiation), sub-strand 3.3.
2. There are two parts to Task 3.
a. In the first part, students have to make some measurements, in a practical setting, and use the
data collected to carry out some basic calculations.
b. For the second part, students will use their knowledge of the content to derive their answers.
This second part will be provided from EQAP at the appropriate time in the year.
3. For the first part, students are to choose the application area i.e. soccer or basketball or throwing a spear
or catapulting a stone or something else. They are to be given 2 or 3 lessons to complete the practical
part of throwing or kicking or catapulting an object, from which they are to measure the following (some
approximations will be necessary):
Measurements to be taken
1 Angle 𝜽
2 Distance d
3 Time of flight t
24
TASK 4
TASK 4
INTEGRATION
The application of integration is an essential component of mathematical applications in real life situations.
Finding areas enclosed between boundaries and volumes of revolution are such important applications.
Task 4 provides an opportunity for students to work collaboratively in order to solve application problems
on areas and volumes together. Teachers are encouraged to provide students with worksheets containing
problems that are based on learning outcomes from sub-strands 4.1 and 4.3, upon which they can
collaborate, learn together and practice essential skills that relate to the process of finding areas and volumes
of revolution.
1. Task 4 is based on the topic of Integration and the learning outcomes to be assessed in this task are
taken from Strand 4, sub-strands 4.1 and 4.3
2. Task 4 will be administered as a controlled assignment, and the task paper together with the scoring
rubric will be provided by EQAP at the appropriate time in the year. The date for administration of this
CAT will be indicated in the IA Due Dates document that will be provided from EQAP at the beginning
of the year.
3. Teachers are expected to ensure that the task is administered properly and scored according to the
scoring rubric that will be provided. Proper administration includes regular monitoring by teachers to
ensure that there is no plagiarism or cheating.
4. Students are to work collaboratively in groups of 2s or 3s, and they are to be encouraged to discuss the
various methods of solving each problem; however, each student is to submit his or her own answer
paper.
5. Teachers are encouraged to provide students with worksheets containing problems that assess the
learning outcomes in sub-strands 4.1 and 4.3 and facilitate their learning to provide them with the
experience and skills necessary for them to engage with Task 4, as well as similar items that will appear
in the final examination.
6. Students are to be provided with 2 - 3 lessons to complete this task.
25
INTERNAL ASSESSMENT (IA) PROGRAM APPROVAL
At the beginning of each year, each school presenting students for the South Pacific Form Seven
Certificate Mathematics (with Calculus) assessment must complete an Internal Assessment Program
Proposal and forward to EQAP by the date set down by the Director. The proposal must make clear a
number of things. These include The time (start and completion date) for each task. In the case of the CATs,
the start and end date is the same as it is a test. Refer to the IA Due Dates document sent from EQAP to
ensure that the start and end dates that is proposed for the school fall within or very close to the dates
indicated in the IA Due Dates document. Also, the details for each task that teachers and students are to
make decisions about, etc.
Since the syllabus is a new revision for 2020, and all IA tasks are new, all schools are expected to submit a
full IA Program proposal. A copy of the IA Program proposal template is provided as Appendix 2 and all
teachers are urged to complete the details for the IA proposal for each subject, in compliance with the
requirements stipulated in the template. Completed IA program proposals are to be submitted to EQAP for
approval by the stipulated due dates.
The IA Program and copies of all assessment tasks and assessment schedules used, as well as a sample of
candidate responses to all internal assessment work undertaken, must be available for verification during
the IA verification visit.
The moderation of Internal Assessment will be done in accordance with EQAP policy as specified from
time to time.
It is recommended that at the start of the year students are given copies of the learning outcomes and the
task descriptions or the IA Programme.
26
APPENDICES
Appendix 1: Sample TASK Scoring Rubrics
2 Cal1.1.3.3 3
3 Cal1.1.3.1 3
4 Cal1.1.2.3 2
5 Cal1.1.2.4 2
6 Cal1.1.3.2 3
2 Cal2.1.2.3 2
3 Cal2.1.3.2 3
4 Cal2.3.2.1 2
5 Cal2.3.3.3 3
6 Cal2.3.3.1 3
2 Cal3.3.2.3 2
3 Cal3.3.3.1 3
4 Cal3.1.2.4 2
5 Cal3.3.3.4 3
27
Task 4: INTEGRATION (10%)
1 Cal4.1.3.1 3
2 Cal4.1.2.3 2
3 Cal4.1.3.2 3
4 Cal4.3.3.1 3
5 Cal4.3.4.1 4
6 Cal4.3.4.2 4
Name:
Pages 3-6:
1 Task title: Task 1:_________________________
The title should be brief and include a reference to the particular syllabus topic or skill which is
being assessed by the task.
Example: “Research Topic – Investigation of a Social Issue.”
2 Learning Outcomes: List the Specific Learning Outcomes (SLOs) to be assessed by the task
These are found in the syllabus and need to be identified before the tasks are constructed.
Example: Describe a feature of ….
(Copy and paste directly from the aligned Syllabus: it must show strand, sub strand and SLOs)
28
3. Assessment/Task:
Describe the task as a form of assessment to measure student achievements of the above
learning outcomes at different stages of the lesson/task implementation.
(Think of what are the best types of assessment for the above LOs so that your students can
demonstrate they have achieved the learning outcomes. Also include how you will pre-assess their
knowledge at the beginning of the lesson and how you will continuously assess them throughout the
strand/topic to monitor their learning progress. The summative assessments are the final IA tasks.)
e.g. Diagnostic: (can be oral questions/short tests/ surveys/questionnaires to find out what students
already know before the lesson)
Formative: 1. This is the formative use of the summative assessment such as the drafts submitted,
self-assessment, peer assessment, teacher assessment of the drafts and specific feedback provided to
improve the task. 2. For CATs – this can be similar items prepared by teachers using the SLOs and
given to students for practice. After scoring, the feedback needs to be given to improve learning. If
majority students not doing well then re-teach using another strategy, assess and monitor learning.
Summative: (these are the final IA tasks or the CATs to measure how much the students have
learnt/achieved after the learning period)
4 Resources: List materials required for completing the task (for learning & demonstrating the
achievement for the SLOs.
This must specify any material items such as books, documents, maps, stimulus material, equipment
required by the task, including use of technology.
29
Example: Your task is to focus on an important social issue. After investigating that issue, you need
to process information collected and suggest possible courses of action that authorities could take.
12 Scoring Rubric
Copy and paste directly from the aligned Syllabus the relevant scoring rubrics
30
Appendix 3: List of useful formulae and tables
31
32
MAC – IA
33
Appendix 4: IA Program Summary Form
Start End
Task Description/Focus Weighting
Task Date Date
1. Algebra 10%
2. Trigonometry 10%
3. Differentiation 10%
4. Integration 10%
Total 40%
34
Appendix 5: Electronic calculators in examinations
Written or printed materials (including information and routines stored in the programmable memory of
calculators) are prohibited.
Due to rapid changes in calculator technology, the Board will regularly review its policy on the use of
calculators in examinations. However, every effort is made to ensure that schools are given adequate notice
of policy changes.
The following policy aims to compromise between rewarding the appropriate use of technology while
giving consideration to associated equity issues. The Board has a responsibility to ensure fairness and
equity to all candidates.
Examination setters are aware of calculator technology, and take calculator capability into account in the
design of examination questions and marking schedules.
General Policy
The EQAP Assessment and Certification Rules and Procedures for Secondary Schools allow candidates to
use a calculator in any of its examinations provided that the calculator is silent, hand-held, non-printing and
contains its own power source. However, calculators may not be used to pass information to other
candidates, bring information into the examination, or as a dictionary/translator.
EQAP encourages examiners to set papers that examine understanding of concepts in such a way that the
use of sophisticated calculators is not a significant advantage. Examination questions may require details
of working steps to be shown to ensure that candidates understand the key concepts being assessed.
EQAP’s policy on calculators in examinations allows the legitimate use of most types of calculator,
including graphical and programmable calculators. The intention of the policy is to support the directions
of curriculum development and encourage the appropriate use of calculator technology. The policy does
not allow the use of calculators to contravene other examination rules and procedures.
The exception to the above paragraph is the use of any calculator that has symbolic algebraic manipulation
capability. These will continue to be prohibited in all of the Board’s examinations as they may offer
candidates who use them a significant advantage over other candidates.
The following models have currently been identified as having this capability:
• Texas Instruments T189
• Texas Instruments T192
• Texas Instruments T192 Plus
• Casio CFX 9970G
• Casio Algebra FX 2.0
• Hewlett Packard HP48G
• Hewlett Packard HP48GX
• Hewlett Packard HP49G
35
EQAP may from time to time publish more detailed rules for the use of calculators, or further add to the list
of prohibited calculators.
The Instructions to Candidates booklet, which is issued to all candidates prior to the examination period,
summarises the above rules and procedures and also states:
Calculators
Candidates are recommended to take a calculator into the examination room for subjects where they have
used a calculator during the year. For subjects where a scientific calculator has been used during the year,
this should be taken to the examination.
Candidates bringing more sophisticated calculators into an examination room may be subjected to
additional scrutiny by supervisors.
Any possible misuse of calculators during an examination will be handled through the Board’s standard
procedures for investigating possible misconduct in examinations.
36
ADVISORY SECTION
Suggested Texts
This is a list of only some Mathematics texts that are available and have been used for teaching the course
for University Bursary Mathematics with Calculus. It is important teachers use this as only a guide and
check current book lists available through publishers and book retailers.
A. Suggested Text
B. Supplementary Texts
Websites
5. Calculus Website
i). www.bbc.uk/education/asguru/maths/intro.shtml is part of www.bbc.co.uk
ii) www.ies.co.jp/math/java/calc/index/html is part of www.ies.co.jp/math/indexeng.html
iii) www.ies.co.jp/math/java/comp/index.html is part of www.ies.co.jp/math/
iv) www.ies.co.jp/math/java/conics/index.html is part of www.ies.co.jp/math/
v) www.unc.edu/~rowlett/units.html is part of www.unc.edu/
vi) www.mathforum.org/pow/
vii)www.ies.co.jp/math/java/misc/index.html is part of www.ies.co.jp/math/indexeng.html
viii) www.btinternet.com/~rfbarrow/
The End
37