Procedure for installing Service Manual data

Trademarks
 Microsoft®, Windows XP®, Windows Vista®, Windows 7®, Windows 10® and Internet Explorer® are
trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
 Adobe, the Adobe logo, and Reader are either registered trademarks or trademarks of AdobeSystems
Incorporated in the United States and/or other countries.

MUT3.pdf
 Contents

1. System requirements for installation of Service Manual

Viewer ..............................................................................................1

2. Procedure for installing .................................................................2

2-1. Flow of installation.....................................................................................2
2-2. Installation of Service Manual data ..........................................................3
2-3. Uninstallation of Service Manual data ...................................................13
Chapter 1 System requirements for installation of Service Manual Viewer
 Refer to System Requirements for installation of Service Manual Viewer (Readme.pdf).

1
Chapter 2 Procedure for installing
2-1. Flow of installation

Start
M.U.T.-3 Start Screen ->
Configuration -> Data update ->
System Information.

M.U.T.-3 basic software : No

RK-0710-00
Viewer software
MC-0710-00
Installing the same versions of
these softwares in advance
Yes

MSB Data Update

2.2. Installing Service Manual

data

Complete

Caution: Start PC with the user who has an administrator.

2
2-2. Installation of Service Manual data
(1) When you set CD/DVD-ROM into CD/DVD drive, the W/M CD/DVD menu screen (Figure 1) appears
automatically.
Click [Installation] button.

Figure 1: W/M CD/DVD menu screen

(2) Click "Run Mut3Check.exe" button if the "AutoPlay" dialog box is displayed.

Figure 2: Auto Play Screen

3
 Note:
If W/M CD/DVD menu screen does not appear, you can double-click [SMVCD_KICK.exe] in the CD/
DVD by using explorer. (Refer to Figure 3).

Figure 3: Running SMVCD_KICK.exe

(3) Click "Allow" button if the "User Account Control" dialog box is displayed. Click "Yes" button if the right
"User Account Control" dialog box is displayed.

Figure 5: User Account Control 2

Figure 4: User Account Control 1

(4) Dialog box for confirmation of Service Manual data installation (Figure 6) appears.
Click Yes.

Figure 6: Dialog box for confirmation of S/M Viewer installation

4
(5) MSB installation will be started continuously. Click Yes, if you want to install MSB into the PC.

Figure 7: MSB Update

(6) If MSB version which has been already installed in the PC is the latest, such a dialog box will be displayed.

Figure 8: The MSB version installed in a PC is latest.

(7) When the window for completion appears, press OK to complete the operation.

Figure 9: MSB update completion.

Installation of Service Manual data is completed.

Remarks
MSB version can be confirmed in the System Information screen.

Figure 10: MSB Version.

5
(8) The dialog box for preparation (Figure 11) appears, and then the next dialog box (Figure 12) for welcome
appears.

Figure 11: InstallShield Wizard

Start to install Service Manual data. Click Next. (Refer to Figure 12)

Figure 12: Starting installation

6
(9) Select location for installing the Service Manual data.

Select one of the following options.

a) [Install the DB data and the Service Manual data into a local drive.] (Recommended setting)
Install all data (the DB and the S/M) into a disk drive.
When you browse the S/M data, CD/DVD-ROM is not required.
Select this basically. (except if there is not enough space in a disk drive.)

Go to page 8

b) [Install only the DB data into a local drive.]

Install only the DB data into a disk drive.
In this case, make reference to the S/M data in CD/DVD-ROM.
When you browse the S/M data, CD/DVD-ROM must be set.

Go to page 11.

Figure 13: Selecting location for installation

7
(10) Case 1 - selecting 'Install the DB data and the Service Manual data into a local drive.'
The image of the Service Manual data is as follows. (Refer to Figure 14)

Appointed e.g. : C:\Program files

MUT3

DATA

003 Destination code

424B202020202020_T Model code (PAJERO in this case)

2007 DB

HTML Storage location of the DB data

CSS

SCRIPT

IMG

VER

Figure 14

(a) Select ‘Install the DB data and the Service Manual data into a local drive. ', and click Next. (Refer to
Figure 15)

Figure 15: Selecting location for Installation

8
(b) Make sure that the directory for installation is displayed properly, and click Next.
(Refer to Figure 16)

Figure 16: Indicating the directory for installation

(c) After copying files (Refer to Figure 17), Setup Status window (Figure 18) appears.

Figure 17: Copying files

Figure 18: Setup Status window

Caution: Just after Setup Status window (Figure 18) is closed, InstallShield Wizard is still
displayed on the task bar. (Refer to Figure 19)
It does not mean PC freezing, so wait for a while.

Figure 19: InstallShield Wizard (task bar indication)

9
(d) When the window for completion appears, click Finish.

Figure 20: Completing installation

10
(11) Case 2 - selecting 'Install only the DB data into a local drive .'
The image of installing the Service Manual data is as follows. (Refer to Figure 21)

Appointed location e.g. : C:\Program files

MUT3

DATA

003 Destination code

424B202020202020_T Model code (PAJERO in this case)

2007 DB

VER Storage location of the DB data

Figure 21

(a) Select ‘Install only the DB data into a local drive.', and click Next. (Figure 22))

Figure 22: Selecting location for installing

(b) Make sure that the directory for installation is displayed properly, and click NEXT. (Figure 23)

Figure 23: Indicating the directory for installation

11
(c) After copying files (Refer to Figure 24), Setup Status window (Figure 25) appears.

Figure 24: Copying files

Figure 25: Setup Status window

(d) When the window for completion appears, click Finish. (Refer to Figure 26)

Figure 26: Completing installation

12
2-3. Uninstallation of Service Manual data
(1) Click "Configuration" button in "M.U.T.-III Start Screen". (Refer to Figure 27)

Figure 27: M.U.T.-III Start Screen.

(2) Click tab of "Data update". (Refer to Figure 28)

Figure 28: Environment Screen.

(3) Click "Service manual" button. (Refer to Figure 29)

Figure 29: Data Update Screen.

13
(4) Click "Service manual to be deleted" button. (Refer to Figure 30)

Figure 30: Service manual data management menu

(5) The list of installed models appears. (Refer to Figure 31)

Click the check boxes of the model to be uninstalled.
Then click Delete button.

Delete button

Figure 31: The model List

(6) The dialog box for confirmation of deletion appears. (Refer to Figure32)
Click OK. When you cancel, click Cancel button.

Cancel button

OK button

Figure 32: Confirmation for deletion

14
(7) Returns to the screen of the list of installed models. (Refer to Figure 33)
Complete to delete the selected model.
Click and returns to the Data Update Screen.

Returns to Data
Update Screen

Figure 33: The model list

15