Clamp-on ultrasonic flow meter

IFX-P200 – ULTRASONIC FLOW METER “CLAMP-ON” TYPE

PORTABLE INSTRUMENT

• Very robust and light portable Ultrasonic Flow

Meter with graphic LCD.
• Non-intrusive portable measurement suitable
for pipes in different materials and for
diameters from DN10 up to DN3000 with
a choice of sensors.
• Suitable for any liquid regardless conductivity,
pressure or chemical characteristics.
• User friendly menu with setup assistance
for easy and fast operations.
• Audible Sensor Positioning Assistant for easier
sensor mounting.
• Measuring principle based on transit time with
dual DSP technology for improved accuracy.
• Integral Data logger able to store up to 100.000
measurement, each including up to 10 units,
and dedicated software for PC data download.
• Bidirectional measurement with totalizing
function.
• Single sensor able to cover application
from DN50 up to DN3000.
• Robust IP65 transport case.
• Optional magnetic rail or mounting accessory.
• Optional integral wall thickness gauge.
• Operates also connected to mains through
the battery charge port.

TECHNICAL DATA Dimensions

Measuring Principle Transit time

Velocity range 0,01 - 25 m/s

Resolution 0,25 mm/s 58 mm

Repeatability 0,15% of measured value

Accuracy (Flow/Volume) ±1-3% of measured value depending

on application
±0,5% of measured value with process
calibration against master meter

Accuracy (velocity) ±0,5% of measured value

124 mm
248 mm

Measurement rate 1 Hz as standard

Response time 1 second

Damping of reading 0...99 seconds (selectable)

58 mm
Solids and gas content in media <10% in volume

Enclosure Robust ABS housing with rubber shock

protector

Protection rate IP65

Ambient temperature –10 +60 °C (for electronics)

Supply Internal rechargeable batteries

124 mm
Operation time up to 24 hours with fully charged batteries

Display LCD graphic with back light

Weight (Approx.) 0,65 kg (instrument only)

7 kg (transport case with instrument
and sensors)

Operating languages English, Spanish, Italian (other on request)

IFX-P210 – BATTERY OPERATED “CLAMP-ON” ULTRASONIC FLOW METER
DESIGNED FOR TEMPORARY SITE INSTALLATION

TECHNICAL DATA
Measurement principle Ultrasonic transit-time difference

Measurement type on line non-invasive

Flow velocity range ±0.01 ... 25 m/s

Resolution 0,25 mm/s

Repeatability 0,15% of measured value, ±0.015 m/s

Accuracy (Flow/Volume) ±1-3% of measured value depending

on application
±0,5% of measured value
with process calibration

Flow velocity (mean) ±0,5% of measured value

Measurement rate 100 Hz (standard)

Pipe diameter range (25 mm) 50 mm to 3000 mm (larger

pipe based on material)

Temperature range for sensors –30 to +130 °C (–22 to +266 °F)

Housing Rugged integrated IP 67 - portable

Display LCD display and full keypad

Battery life up to 100 days with internal battery

Power supply 1, 2 or 3 x LiFePo4 12.4 Ah

Power adapter 100 ... 240 V AC input, 9 V DC output

Operating time 1 Cell: up to 7 days continuous

operation, 30 days in
hibernation mode*
2 Cells: up to 14 days continuous
operation, 60 days in
hibernation mode*
3 Cells: up to 21 days continuous
operation, 100 days in
hibernation mode*
Unlimited when connected
to main through the battery
charge port

Dimensions 260 (h) x 280 (w) x 200 (d) mm

• Portable, compact flow meter designed for applications requiring Weight (Approx.) 6.0 kg
rugged and waterproof instrument. Operating languages English, Spanish, Italian
(other on request)
• Large battery capacity intended for long-term installation in remote
areas where access to power is limited and exposure
to the elements is likely. *B
 ased on normal operating conditions, with no process output enabled.

• Robust and sealable IP67 housing granting measurement

and instrument safety. Dimensions
• Easy and fast to install thanks to non-invasive sensors based 270 mm
on transit time ultrasonic principle.
160 mm 81 mm
• One sensors pair to cover any process pipe from DN 50 to DN 3000.
20 mm
61 mm
• Integral logger allowing up to 1.000.000 of measure records.
• Modular battery packages and different operational mode to extend
120 mm

285 mm

unattended site measuring life up to more than 3 months.

155 mm

• Suitable for a variety of applications from water network for leak

detection and district metering, to temporary replace in line flow
meter, to industrial installation on corrosive or dangerous media.
• Delivered with dedicated software for data download
and management.
• Optional 4-20 mA, pulse or relay process output.
175 mm

• Optional magnetic rail or mounting accessory.

• Optional integral wall thickness gauge.
• Operates also connected to mains through the battery charge port.
 www.isoil.com

IFX-F100 – ULTRASONIC FLOW METER “CLAMP-ON” TYPE

FOR FIXED INSTALLATIONS

• Flow transmitter with backlight LCD display and 5 keys board

programming.
• Non-intrusive fixed measurement suitable for pipes in different
materials and for diameter from DN10 up to DN3000 with a choice
of sensors.
• Suitable for any liquid regardless conductivity, pressure or chemical
characteristics.
• User friendly menu for easy and fast operations.
• Audible Sensor Positioning Assistant for easier sensor mounting.
• Measuring principle based on transit time with dual DSP technology
for improved accuracy.
• Bidirectional measurement with totalizing function.
• Optionaly Digital or Analog outputs including Modbus, RTU e HART
Protocol.
• On request Energy calculation function including Pt100 sensors input
module. Requires clamp-on Pt100 sensors.

TECHNICAL DATA
Measuring Principle Transit time

Velocity range 0,01 - 25 m/s

Dimensions
Resolution 0,25 mm/s
Repeatability 0,15% of measured value
Accuracy (Flow/Volume) ±1-3% of measured value
depending on application
58 mm ±0,5% of measured value
with process calibration
against master meter 160 mm 81 mm
20 mm
Accuracy (velocity) ±0,5% of measured value 61 mm
Measurement rate 1 Hz as standard
120 mm

Response time 1 second

155 mm

Damping of reading 0...99 seconds (selectable)

124 mm
248 mm

Solids and gas content in media <10% in volume

Housing Die cast Aluminium for wall

mounted

Protection rate IP66

Ambient temperature –10 +60 °C (for electronics)

Power supply 100...240 VAC or 9...36 VDC

Power consumption <5 W

Display LCD graphic with back light

Weight (Approx.) 0,75 kg

Operating languages English, Spanish, Italian

(other on request)
 www.isoil.com

ULTRASONIC SENSORS FOR PORTABLE METERS

SENSOR TYPE K1N / K1E SENSOR TYPE K4N / K4E

Pipe diameter 50...3000 mm Pipe diameter 10...250 mm

Sensor dimensions 60 x 30 x 34 mm Sensor dimensions 43 x 18 x 22 mm

Sensor head material Stainless Steel Sensor head material Stainless Steel

Cable conduit material Stainless Steel Cable conduit material Stainless Steel

Working temperature –30 +130 °C (–30 + 250 °C for K1E) Working temperature –30 +130 °C (–30 + 250 °C for K4E)

Protection rate IP 68 Protection rate IP 68

Cable length 4 m standard Cable length 2,5 m standard

(on request other lengths) (on request other lengths)

ULTRASONIC SENSORS FOR FIXED METERS

SENSOR TYPE K1P / K1L / K1N / K1E SENSOR TYPE K4L / K4N / K4E
Pipe diameter 50...3000 mm Pipe diameter 10...250 mm

Sensor dimensions 60 x 30 x 34 mm Sensor dimension 43 x 18 x 22 mm

Sensor head material Stainless Steel (plastic for K1P) Sensor head material Stainless Steel

Cable conduit material PVC (Stainless Steel for K1E/K1N) Cable conduit material PVC (Stainless Steel for K4E/K4N)

Working temperature K1P –20 +50 °C Working temperature K4L –30 +80 °C
K1L –30 +80 °C K4N –30 +130 °C
K1N –30 +130 °C K4E –30 + 250 °C
K1E –30 + 250 °C

Protection rate IP 68 Protection rate IP 68

Cable length K1P: 3 m Cable length K4L: 5 m

K1L: 5 m K4N / K4E: 2,5 m
K1N / K1E: 4 m (on request other lengths)
(on request other lengths)
 www.isoil.com

Measuring principle

gandini-rendina.com
Transit time measuring principle.
Sensors “a” and “b” work alternately to send and receive ultrasonic

01/2016
pulses.
a b The sound waves “a” to “b” travelling with the flow move faster than
those “b” to “a” travelling against it; the time difference is the flow
velocity.
Figure shows typical V reflection mounting, where sensors are
d tab tba
installed on the same external side of pipe, different installation ways
can be used to manage different pipe size and material.
v

THE MANUFACTURER RESERVES THE RIGHT TO CHANGE DATA & SPECIFICATIONS WITHOUT NOTICE.
ACCESSORIES
A list of accessories are available for easy mounting or for improving the
measuring results like:

• Integral wall thickness gauge for •C

 lamp on temperature sensors
IFX-P200 or IFX-P210 – for direct for energy measurement
connection on the meter • Clips and Mounting accessories
• E xternal wall thickness gauge • Acoustical Paste Magnetic mounting rail
also suitable for fixed meters
• Extension cables
• Magnetic rails

PT100 transducer fixed to pipe Wall tickness gauge

The ultrasonic flow meter specifically designed

for water treatment and chemical industry.

Information shown in this brochure are not exhaustive, for detailed characteristics refer to individual data sheet.

ISOIL INDUSTRIA SPA

Cinisello Balsamo - Milano (Italy)
Via Fratelli Gracchi, 27
tel. +39 0266027.1 - fax +39 026123202
www.isoil.com
[email protected]