Scribd
Upload
35 views

PreInstallation Humastar 600

This document is a pre-installation report for a HumaStar 600 system. It summarizes the customer and delivery address information, confirms that the installation site meets space and environmental requirements, and ensures electrical, water and computer connections will be ready. Installation details like delivery method and assistance are also provided. Customer and technician signatures are needed to acknowledge preparation for installation on the scheduled dates.

Uploaded by

Dinesh Sreedharan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views

PreInstallation Humastar 600

This document is a pre-installation report for a HumaStar 600 system. It summarizes the customer and delivery address information, confirms that the installation site meets space and environmental requirements, and ensures electrical, water and computer connections will be ready. Installation details like delivery method and assistance are also provided. Customer and technician signatures are needed to acknowledge preparation for installation on the scheduled dates.

Uploaded by

Dinesh Sreedharan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

HumaStar 600

Pre-Installation Report

Customer information
Customer name: Customer number:

Delivery address: Floor:

Contact 1: Phone, email:

Contact 2: Phone, email:

Human system

 HumaStar 600

Analyzer location

Is the installation site the final location of the analyzer?  Yes  No


Remarks:

 Required space provided


Measurements:
Width: __________ cm Depth: __________ cm Hight: __________ cm
WxDxH (analyzer): 100 x 74 x 113 cm
WxDxH (required space): 162 x 128 x 160* cm
* Width and depth are minimum values. Higth with door open
Extra space for PC, monitor, mouse, keyboard and printer necessary

 Surface payload sufficient


Gross weight: __ kg Net weight:180 kg

 Surface level: __________ cm  Air flow and dust according to DIN Lab terms

Pre-Installation Report

Page 1 of 4
 Environmental preconditions met  No direct sunlight
Ambient temperature: 15°C to 28°C
Temperature variation not to exceed ±2°C during
analysis
Humidity: 10% to 80% relative with no condensation
Altitude: max _____ m

 No vibrations via motors (centrifuge, etc.)  A/C provided

Delivery

 Delivery at-grade
 Delivery per hand lift possible
 Delivery to floor __________
 Ramp provided
 Goods hoist or elevator provided

 Packaging material has to be taken away

 Help for installation provided (2 persons necessary)


Contact:

Electrical connection

 4 separate, grounded sockets DIN (analyzer, PC, monitor, printer)


 Online UPS min. 3KVA provided
 Separate ground (max. Voltage between ground and neutral: 0.5V) provided

Water supply

 Water quality supplied (test report attached)


Requirement: Quality 2 ISO3696, max. 0.1 µS/cm (double distilled)

Sample tube

 Sample tube (dimension, model, type):


 Barcode label type:

Personal computer

 PC according the specification provided ,by the customer


 Printer, type:

Minimum requirements:
Pre-Installation Report

Page 2 of 4
Processor Intel Core 2 Duo E8400 or equivalent

Memory: 1Gb Ram (Windows XP), 2 Gb Ram (Vista, 7)


Video board graphics engine GeForce 8400 or equivalent
Monitor 17“ (VIS 15.7“)
Display resolution 1024x768 or higher (vertical refresh > 70 Hz)
Color quality 16 bits or 32 bits
Hard drive 160 Gb EIDE ATA-100 7200 rpm or higher
CD-RW or DVD -RW or DVD-R
Keyboard 105-key
Network adapter Ethernet 10/100 Mbits
USB 2.0 port or higher
Serial port: RS-232 serial port. additional serial port for LIS connection
Operating system: Windows XP, Windows Vista, Windows 7

LAN port for LIS host communication


External printer, A4

LIS interface

LIS connection desired:  Yes  No


Assumption of costs:  Yes  No
LIS company name:

Contact person laboratory IT:

Briefing, training

 Minimum 2 members of staff to attend briefing:


st
1 name:
nd
2 name:
rd
3 name:

 Specific parameter/application in briefing:

Fixed dates

Delivery date:

Installation date:

Briefing date:

Pre-Installation Report

Page 3 of 4
Signatures

Customer's contact (name, title and date) Human's contact (name, title and date)

Pre-Installation Report

Page 4 of 4

You might also like