MRV412

Receiving Card

D .
L T
.,
C O
C H
TE
A R
ST
VA
O
N
A N
I '
X

Specifications
 MRV412 Receiving Card Specifications

Change History
Document Version Release Date Description

V1.0.1 2021-07-30 Added the certification related description.

V1.0.0 2021-04-26 First release

Introduction
The MRV412 is a general receiving card developed by NovaStar. A single MRV412 loads up to 512×512 pixels

.
(NovaLCT V5.3.1 or later required). Supporting various functions such as color management, 18Bit+, pixel level

D
brightness and chroma calibration, individual Gamma adjustment for RGB, and 3D, the MRV412 can significantly
improve the display effect and user experience.

L T
The MRV412 uses 12 standard HUB75E connectors for communication. It supports up to 24 groups of parallel RGB
data. On-site setup, operation, and maintenance were all taken into account when designing the hardware and

.,
software of the MRV412, allowing for an easier setup, more stable operation, and more efficient maintenance.

Features
C O
H
Improvements to Display Effect The display image can be set to rotate in

C
multiples of 90°(0°/90°/180°/270°).

TE
 Color management Improvements to Maintainability
Switch the color gamut of the screen between
multiple gamuts to enable more precise colors
 Mapping function

R
on the screen.
The cabinets can display the receiving card

A
 18Bit+ number and Ethernet port information, allowing

T
Improve the LED display grayscale by 4 times, users to easily obtain the locations and

S
avoiding grayscale loss due to low brightness connection topology of receiving cards.
and allowing for a smoother image.

A
 Setting of a pre-stored image in receiving card
 Pixel level brightness and chroma calibration The image displayed on the screen during

V
Working with NovaLCT and NovaCLB, the startup, or displayed when the Ethernet cable is

O
receiving card supports brightness and chroma disconnected or there is no video signal can be
calibration on each LED, which can effectively customized.

N
remove color discrepancies and greatly improve
 Temperature and voltage monitoring
LED display brightness and chroma consistency,
The receiving card temperature and voltage can

N
allowing for better image quality.
be monitored without using peripherals.

A
 Quick adjustment of dark or bright lines

'
 Cabinet LCD

I
The dark or bright lines caused by splicing of
The LCD module of the cabinet can display the

X
modules or cabinets can be adjusted to improve
temperature, voltage, single run time and total
the visual experience. The adjustment can be
run time of the receiving card.
easily made and takes effect immediately.
 Bite error detection
 3D function
The Ethernet port communication quality of the
Working with the sending card that supports 3D
receiving card can be monitored and the number
function, the receiving card supports 3D output.
of erroneous packets can be recorded to help
 Individual Gamma adjustment for RGB troubleshoot network communication problems.
Working with NovaLCT (V5.2.0 or later) and the
NovaLCT V5.2.0 or later is required.
sending card that supports this function, the
receiving card supports individual adjustment of  Firmware program readback
red Gamma, green Gamma and blue Gamma, The receiving card firmware program can be
which can effectively control image non- read back and saved to the local computer.
uniformity under low grayscale and white NovaLCT V5.2.0 or later is required.
balance offset, allowing for a more realistic
 Configuration parameter readback
image.
The receiving card configuration parameters can
 Image rotation in 90°increments be read back and saved to the local computer.

www.novastar.tech 1
 MRV412 Receiving Card Specifications

Improvements to Reliability the receiving card at the same time. Users

usually use the configuration parameters in the
 Loop backup application area. If necessary, users can restore
The receiving card and sending card form a loop the configuration parameters in the factory area
via the main and backup line connections. If a to the application area.
fault occurs at a location of the lines, the screen  Dual backup of the application program
can still display the image normally. Two copies of the application program are stored
 Dual backup of configuration parameters in the receiving card at the factory to avoid the
The receiving card configuration parameters are problem that the receiving card may get stuck
stored in the application area and factory area of due to program update exception.

Appearance

D .
L T
.,
C O
C H
TE
A R
S T
V A
O
N
All product pictures shown in this document are for illustration purpose only. Actual product may vary.

N
Indicators

I '
Indicator
A Color Status Description

X
Running
indicator
Green Flashing once every 1s The receiving card is functioning normally. Ethernet cable
connection is normal, and video source input is available.

Flashing once every 3s Ethernet cable connection is abnormal.

Flashing 3 times every 0.5s Ethernet cable connection is normal, but no video source
input is available.

Flashing once every 0.2s The receiving card failed to load the program in the
application area and is now using the backup program.

Flashing 8 times every 0.5s A redundancy switchover occurred on the Ethernet port
and the loop backup has taken effect.

Power Red Always on The power input is normal.

indicator

www.novastar.tech 2
 MRV412 Receiving Card Specifications

Dimensions

D .
L T
.,
C O
C H
TE
A R
S T
V A Tolerance: ±0.1 Unit: mm

O
Pins

N
A N
I '
X

Pin Definitions
Ground GND 16 15 HOE Display enable signal
Latch signal HLAT 14 13 HDCLK Shift clock
HD 12 11 HC
Line decoding signal Line decoding signal
HB 10 9 HA

www.novastar.tech 3
 MRV412 Receiving Card Specifications

Pin Definitions
HE 8 7 B /
/ G 6 5 R /
Ground GND 4 3 B /
/ G 2 1 R /

Specifications
Maximum 512×512 pixels
Loading Capacity
Electrical Input voltage DC 3.3 V to 5.5 V
Specifications

.
Rated current 0.5 A

Rated power
consumption
2.5 W

T D
Operating
Environment
Temperature –20°C to +70°C

., L
O
Humidity 10% RH to 90% RH, non-condensing

Storage Temperature –25°C to +125°C

C
H
Environment
Humidity 0% RH to 95% RH, non-condensing

C
TE
Physical Dimensions 145.7 mm × 91.5 mm × 18.4 mm
Specifications
Net weight 93.1 g

R
Note: It is the weight of a single receiving card only.

Gross weight

T A
12.9 kg

S
Note: It is the total weight of the product, printed materials and

A
packing materials packed according to the packing specifications.

V
Packing Packing specifications Each receiving card is packaged in a blister pack. Each packing

O
Information box contains 100 receiving cards.

N
Packing box 650.0 mm × 500.0 mm × 200.0 mm
dimensions

N
Certifications RoHS, EMC Class A

I ' A Note: If the product does not have the relevant certifications required by the countries or
regions where it is to be sold, please apply for the certifications yourself or contact

X
NovaStar to apply for them.

The amount of current and power consumption may vary depending on factors such as product settings, usage, and
environment.

www.novastar.tech 4
 D .
L T
.,
C O
C H
TE
A R
S T
V A
O
N
A N
I '
X