PRODUCT

GUIDE
www.autonics.co.in

190920_Product Guide_EN.indd 1 2019-09-18 오전 10:57:34

 SENSORS

VG Series
Vision Vision Sensors (Color/Monochrome)
Sensors
Precise and Accurate Inspection with
Global Shutter Method and Integrated
Lighting
The VG series(color/monochrome type) vision sensors NEW
utilize images captured by the integrated industrial
camera lenses to determine the target object's presence,
size, shape, orientation, patterns and more. The
integrated design featuring LED lighting, camera and
lens allows users to set up and manage the units more
easily compared to vision systems.

Color Integrated Global Shutter Set Workgroups

Identification Lighting Method

VISION
MASTER IP67
Save Data Various Dedicated Protection
Inspection Software Rating
Functions

· Vision sensors with integrated LED lighting · Tight lens cover attachment allows application in
· Global shutter method for accurate image capturing environments with dust or shock
with minimal motion blur · Set up to 32 separate workgroups (64 inspection points
· Enhanced optical performance with light interference per workgroup)
prevention technology · Save data to FTP servers
· Various inspection functions: alignment, brightness, · Free vision sensor software included (Vision Master)
contrast, area, edge, shape, length, angle, diameter, : inspection simulator function, manage parameters and
object counting, color identification(color type), color workgroups, inspection results monitoring, send data
area(color type), color object counting(color type) to FTP, multilingual support, etc.
· Inspection simulator function · IP67 protection structure (IEC standard)

Used Together With:

APPLICATION
APC-1011 Series
: 10.1-Inch Industrial Panel PC
NEW

Autonics Product Guide

190920_Product Guide_EN.indd 2 2019-09-18 오전 10:57:38

 LSE Series
LiDAR Laser Scanners

Wide and Accurate Laser Scanning with

Time-of Flight (ToF) Detection
The LSE series utilizes time-of-flight (ToF) method using
infrared lasers to accurately detect object presence
NEW
within a 5.6 m x 5.6 m detection area (90˚). The scanners
offer 4 separate laser beam channels which can be
activated individually or simultaneously depending
on detection requirements. The units can also set
concentrated monitoring areas and non-detection areas
for flexible application in diverse environments. The
LSE series can be configured and monitored on PCs
using the dedicated software, atLidar. Users can also
configure and manage the units using the provided
infrared remote control.

Area Detection 4 Beam Set Non-Detection Remote Control Dedicated Protection

Method Channels Area Software Rating

· Activate multiple operation channels from channel 1 to · Easy parameter settings using remote control
channel 4 (RMC-LS, sold separately)
- Set detection area for each channel · Laser property: Class 1, infrared laser (905 nm),
: from 0.3 m x 0.3 m to 5.6 m x 5.6 m max. output power: 75 W
- Set concentrated monitoring area for each channel · Compact size for easy installation
· Set minimum detection target size (W 125 x H 80.3 x L 88 mm)
(size for each W x H x L: 5/10/15/20 cm) · IP67 protection structure (IEC standard)
· Parameter setting and real-time monitoring with · Korean Railway Standard compliant
"atLidar"laser scanner management software
(Ethernet connection)

APPLICATION

2 | 3

190920_Product Guide_EN.indd 3 2019-09-18 오전 10:57:40

 SENSORS

BRQ Series BJX Series

Photoelectric Cylindrical Photoelectric Sensors Compact Long Distance Photoelectric
Sensors Sensors
NEW NEW

· Ø18 mm head cylindrical photoelectric sensors · High performance lens with long sensing distance
· Various body housing material: stainless steel, metal, plastic - Through-beam type: 30 m
· Various body sizes: standard, short body - Diffuse reflective type: 1 m
· Front sensing type, side sensing type available - Retroreflective type: 3 m (MS-2A)
· Sensitivity adjuster · Compact size: W 20 x H 32 x L 11 mm
· Switch between Light ON and Dark ON modes using · M.S.R (Mirror Surface Rejection) function (retroreflective type)
control wire · Light ON/Dark ON operation mode switch
· Protection structure: · Sensitivity adjuster
- BRQT: IP67 (IEC standard), IP69K (DIN standard) · Mutual interference prevention function
- BRQM, BRQP: IP67 (IEC standard) (except through-beam type)
- BRQPS: IP67 (IEC standard) · IP65 protection structure (IEC standard)

BC Series BH Series
Color Mark Sensors Front/Side Mount Photoelectric Sensors

· Outstanding color matching accuracy · Front mounting (M18 nut) or side mounting (M3 screws)
- RGB light emitting diodes and 12-bit resolution · Simultaneous NPN/PNP open collector output
- 2 detection modes (color only / color + intensity) · Compact size: W 14 mm x H 34.5 mm x L 28 mm
- 3-step sensitivity adjustment for each mode · Mirror Surface Rejection (MSR) function allows stable
(fine, normal, rough) detection of highly reflective targets (retroreflective type only)
· Check reference color with teaching indicator · Sensitivity adjuster
· Operation indicator (red LED), stability indicator (green · Light ON / Dark ON operation mode switch
LED), timer indicator (orange LED) · Operation indicator (red LED) and stability indicator (green LED)
· W 1.24 x L 6.7 mm spot size for detection of tiny targets · Mutual interference prevention function (except through-
and color marks beam type)
· IP67 protection structure (IEC standard) · IP67 protection structure (IEC standard)

Autonics Product Guide

190920_Product Guide_EN.indd 4 2019-09-18 오전 10:57:42

 BTF Series BTS Series
Photoelectric Ultra-Compact, Thin Photoelectric Sensors Ultra-Compact, Slim Photoelectric Sensors
Sensors

· Ultra-thin size of only 3.7 mm · Ultra-slim width of only 7.2 mm

- W 13 × H 19 × L 3.7 mm (through-beam type) - W 7.2 x H 18.6 x L 9.5 mm (through-beam type)
- W 13 × H 24 × L 3.7 mm (diffuse reflective type, BGS - W 7.2 x H 24.6 x L 10.8 mm (retroreflective type,
reflective type) convergent reflective type)
· Maximum detection distance : 1 m (through-beam type) · Maximum detection distance: 1 m (through-beam type)
· Stability indicator (green LED) and operation indicator(red LED) · Stability indicator (green LED) and operation indicator(red LED)
· Stainless steel 304 mounting brackets · Stainless steel 304 mounting brackets
· IP67 protection structure (IEC standard) · IP67 protection structure (IEC standard)

BS5 Series BL Series

Photomicro Sensors Photoelectric Liquid Level Sensors

· Ultra-compact size with built-in amplifiers · Photoelectric sensors for non-contact detection of
· Various shapes available for installation flexibility liquid in transparent pipes
(K, T, L, Y, V types) · Detects presence of liquid in transparent pipes
· NPN open collector and PNP open collector output (external diameter 6 to 13 mm, <1 mm thick)
models available · Compact size: W 23 x H 14 x L 13 mm
· High-speed response frequency : 2 kHz · Light ON/Dark ON operation mode switch
· Switch between Light ON and Dark ON modes · Operation mode and status indicators

Photoelectric Sensors

BEN Series BPS Series BA2M Series BYD Series BS5-P Series BUP Series
Universal Compact Flat Type Long Distance, Compact Push Button Type U-Shaped Type
AC/DC Type Diffuse Reflective Type Standard Type

4 | 5

190920_Product Guide_EN.indd 5 2019-09-18 오전 10:57:46

 SENSORS

BW Series BWC Series

Area Sensors General Purpose Area Sensors Cross-Beam Area Sensors

UPGRADE

· Ambient illuminance : 100,000 lux (upgraded feature) · 3-point cross-beam type detection minimizes non-
· Long sensing distance up to 7 m detection area
· 22 configurations (number of optics : 4 to 48/optical · Long sensing distance up to 7 m
pitch : 20, 40 mm /detection area : 120 to 940 mm) · 14 configurations (number of optics: 4 to 20 / optical
· 20mm optical pitch minimizes non-detection area pitch: 40, 80 mm / detection area: 120 to 1,040 mm)
(BW20-□) · Easy installation with installation mode function
· Bright LED indicators on emitter and receiver · Mutual interference prevention function, self-diagnosis
· Mutual interference prevention function, self-diagnosis (output) function
function, stable operation test · Bright LED indicators on emitter and receiver
· IP65 protection structure (IEC standard) · IP67 protection structure (IEC standard)

BWP Series BWPK Series

Flat Body Area Sensors (Plastic Body) Flat Body Picking Sensors

· Flat body (13 mm) area sensors with Fresnel lens · Flat and compact size : W 30 × H 140 × D 10 mm
· High strength PC/ABS plastic body · High strength PC/ABS plastic body
· High-speed response time under 7 ms · Sensing distance switch (long/short mode switch)
· 4 configurations · Light ON/Dark ON operation mode switch
(optical axis : 8 to 20/detection area : 140 to 380 mm) · Mutual interference prevention function (frequency
· Light ON/Dark ON operation mode switch switching)
· Job indicator ON/FLASHING switch · Picking indicators on emitter and receiver
· Bright LED indicators on emitter and receiver · IP40 protection structure (IEC standard)
· Operation test (emitter stop) function, mutual
interference prevention function
· IP40 protection structure (IEC standard)

Autonics Product Guide

190920_Product Guide_EN.indd 6 2019-09-18 오전 10:57:50

 BF5 Series BFX Series
Fiber Optic High Speed Single/Dual Digital Display LCD Digital Display Fiber Optic
Sensors Fiber Optic Amplifiers Amplifiers
NEW

· Available in dual and single display models · LCD dual display for displaying present value and set value
· Dual digital display for displaying present value and · High resolution (1/10,000) for detecting tiny targets
set value (BF5□-D) · 5 response speeds: ultra-fast mode (50 ㎲), fast mode
· 5 response speeds: ultra-fast mode (50 ㎲), fast mode (150 ㎲), standard mode (500 ㎲), long-distance mode
(150 ㎲), standard mode (500 ㎲), long-distance mode (4 ms), ultra-long-distance mode (10 ms)
(4 ms), ultra-long-distance mode (10 ms) · Saturation prevention function: prevent errors from
· Display range: 0-4000 (standard mode), 0-9999 (long- saturation of received light
distance mode) · External input function: emitter OFF, remote sensitivity
· Inverted display: invert displays depending on setting, peak value reset, output ON/OFF/MAINTAIN,
installation for easier reading energy saving mode OFF functions
· Slim and compact design (W 10 x H 30 x L 70 mm) · Slim and compact design (W 10 x H 30.6 x L 70.5 mm)

FD / FT / FL / GD / GT Series
Fiber Optic Sensor Cables

· Various cable head types (thread, cylindrical, flat, · Various sensing modes (through-beam, diffuse
perpendicular, plastic, area detection) reflective, convergent reflective)
· Various sensing directions (top, side, flat, L-type top, · Various cable types (standard, flexible, coaxial, break-
top + side) resistant, heat-resistant)
· Diverse line-up, easy installation, high performance

6 | 7

190920_Product Guide_EN.indd 7 2019-09-18 오전 10:57:51

 SENSORS

PSQ Series PSAN Series

Pressure Dual Display Digital Pressure Sensors Compact Digital Pressure Sensors
Sensors

· Dual display for simultaneous display of process value · Pressure measurement of any gas, liquid or oil
(PV) and setpoint value (SV) · High display resolution:
· 3-color main (PV) display (RUN mode : green/red, - negative, compound pressure 0.1 kPa
parameter setting mode : orange) - positive pressure 0.1 kPa, 1 kPa
· 12-segment LCD display capable of diverse · Auto shift function, hold function
alphanumeric characters · Independent 2-point output (N.O. / N.C. output selectable)
· Switch between NPN and PNP open collector output via · Zero-point adjustment function, peak value monitoring
parameter configuration function, chattering prevention function
· Analog output : voltage (1-5 VDC), current (DC 4-20 mA) · Analog output : voltage (1-5 VDC), current (DC 4-20 mA)
· Copy parameter settings function · One-touch connector type for easy wiring and
maintenance

PSM Series PSS Series

Multi-Channel Pressure Sensor Compact Non-Indicating Pressure
Indicators Sensors

· Display 8 (PSM8) or 4 (PSM4) channels of pressure · Rated pressure range:

value from analog pressure sensors - negative pressure (0 kPa to -101.3 kPa)
· Input range: 1-5 VDC, DC 4-20 mA (by model) - positive pressure (0 kPa to 100.0 kPa or 1000 kPa)
· Pressure sensor model auto recognition (Autonics PSS - compound pressure (-101.3 kPa to 100 kPa)
series pressure sensors) · Compact size : W 11.8 mm × H 29.3 mm × L 24.8 mm
· Set PV display color by control output type (red/green) (with pressure port)
· Individual output indicators for each channel · Analog output : voltage (1-5 VDC), current (DC 4-20 mA)
· RS485 (Modbus RTU) communication support · Power supply : 12-24VDC ±10
· Refrigeration pressure control mode

Autonics Product Guide

190920_Product Guide_EN.indd 8 2019-09-18 오전 10:57:54

 TPS30 Series
Pressure Stainless Steel Pressure Transmitters
Transmitters

Cable Type DIN43650-A DT04-3P M12 Head Type

Connector Type Connector Type Connector Type

· Robust build allows high or low pressure measurement · 316L stainless steel body for high corrosion resistance
in high and low temperature environments (except head component of head types)
- High pressure (0 to 60 MPa/0 to 600 bar), · Compact size allows easy installation in tight or limited
low pressure (0 to 2 MPa/0 to 20 bar) spaces
* Sealed gauge pressure (-0.1 to 2 MPa/-1 to 20 bar), absolute pressure · 1 ms high-speed response rate
(0 to 2 MPa/0 to 20 bar), gauge pressure (0 to 60 MPa/0 to 600 bar)
· Analog output : current (DC 4-20 mA), voltage (1-5 VDC)
- Temperature range (-40˚ to 125˚C) (may vary by model) · Available thread sizes : G3/8, G1/4, R1/2
· Applicable in diverse settings including packaging · IP67 protection structure (IEC standard),
machines, heavy machinery, factories, and shipbuilding IP65 for DIN43650-A connector type
· Pressure measurement of any gas, liquid, or oil

KT-302H Series PTF30 Series

Intelligent Pressure Transmitters 2-Wire Smart Pressure Transmitters

· HART protocol compatibility* · Optimized for small to medium sized projects such as
· Display can be rotated 330˚ depending on environment HVAC, sewer systems, and incinerators.
conditions · Minimized external interference with improved noise
· High accuracy pressure measurement (±0.2%) immunity
· Backlit display for high visibility · Aluminum body and stainless steel diaphragm
· Self-stabilization and filter · DC 4-20mA analog output (2-wire)
· Aluminum body and stainless steel diaphragm · Various functions
· Explosion-proof structure : Ex d IIC T6 (IP67) - User input range setting, display scale, output scale,
* HART Field Communications Protocol may depend on several factors, digital filter, multi-display selection, error display,
including calibrators, software, or firmware updates.
TUF(two unit function), etc.
· Explosion-proof structure : Ex d IIC T6 (IP67)

8 | 9

190920_Product Guide_EN.indd 9 2019-09-18 오전 10:57:59

 SENSORS

PRF(D)(W) Series
Proximity Full-Metal Cylindrical Inductive Proximity Sensors
Sensors
LINE UP
Full-Metal Sensors with
Robust Performance PRF(D) Series

12mm PRF(D)W Series

Full-Metal Thick Sensor Long Sensing Operation Strong Against Various Protection
Housing Head Distance Indicator Impact and Wear Protection Rating
(PRFD(W) Series) Circuits

· High resistance to impact and wear caused by contact · Built-in surge protection circuit and overcurrent
with workpieces or wire brushes protection circuit
(sensor head/housing: stainless steel) · Operation indicator (red LED), stability indicator (green LED)
· Reduced risk of malfunction caused by aluminum chips (PRFD[W] models)
· Excellent noise immunity with specialized sensor IC · 360° ring type status indicator
· Long sensing distance (PRFD[W] models) · Oil resistant cable
· Diameter of head: 8 / 12 / 18 / 30mm · Available in cable type and cable connector types
· IP67 protection structure (IEC standard)

PRF(D)A(W) Series
Spatter-Resistant Full-Metal Cylindrical Inductive
Proximity Sensors
LINE UP
PTFE Coated for High PRF(D)A Series

Resistance to Welding Spatter

METAL
12mm 36
PRF(D)AW
Series
IP67
Full-Metal Thick Sensor Long Sensing Operation, Prevent Strong Against Various Protection
Housing Head Distance Stability Malfunction Impact and Wear Protection Rating
(PRFDA(W) Series) Indicators Due to Spatter Circuits

· PTFE coating prevents malfunctions caused by welding · Built-in surge protection circuit and overcurrent
spatter protection circuit
· High resistance to impact and wear caused by contact · Operation indicator (red LED), stability indicator (green LED)
with workpieces or wire brushes (sensor head/housing: (PRFDA[W] models)
stainless steel) · 360° ring type status indicator
· Reduced risk of malfunction caused by aluminum chips · Oil resistant cable
· Excellent noise immunity with specialized sensor IC · Available in cable type and cable connector types
· Long sensing distance (PRFDA[W] models) · IP67 protection structure (IEC standard)
· Diameter of head: 8 / 12 / 18 / 30mm

Autonics Product Guide

190920_Product Guide_EN.indd 10 2019-09-18 오전 10:58:02

 PR Series PRD Series
Proximity Standard Cylindrical Inductive Proximity Cylindrical Inductive Proximity Sensors
Sensors Sensors With Long Sensing Distance

· Excellent noise resistance with specialized sensor IC · Long sensing distance and excellent noise resistance
· Built-in surge protection circuit, reverse polarity with specialized sensor IC
protection circuit (DC 3-wire types), and overcurrent · Simple operation, reliable performance, and high
protection circuits (DC types) durability
· Operation indicator (red LED) · Built-in surge protection circuit, reverse polarity
· Durable and reliable alternative to micro switches protection circuit, and overcurrent protection circuits
and limit switches · Operation indicator (red LED)
· IP67 protection structure (IEC standard) · IP67 protection structure (IEC standard)

PRA Series PRDA Series

Cylindrical Spatter-Resistant Cylindrical Spatter-Resistant Inductive
Inductive Proximity Sensors Proximity Sensors with Long Sensing
Distance

· Coated with teflon for high heat resistance · Coated with teflon for high heat resistance
(prevent malfunction from welding spatter) (prevent malfunction from welding spatter)
· Excellent noise resistance with specialized sensor IC · Long sensing distance and excellent noise immunity
· Built-in surge protection circuit with specialized sensor IC
· Built-in overcurrent protection circuit · Built-in surge protection circuit, reverse polarity
(DC 2-wire, DC 3-wire types) protection circuit, and overcurrent protection circuits
· Built-in reverse polarity protection circuit · Durable and reliable alternative to spatter-resistant
(DC 3-wire types) limit switches

10 | 11

190920_Product Guide_EN.indd 11 2019-09-18 오전 10:58:03

 SENSORS

PS / PSN Series PFI Series

Proximity Rectangular Inductive Proximity Sensors Flat Type Inductive Proximity Sensors
Sensors

PS50 PSN25 / PSN17

· Excellent noise resistance with specialized sensor IC · Flat design (10 mm height) allows easy installation in
· Long life cycle, reliable performance, economical, and limited spaces
easy-to-install · Excellent noise resistance with specialized sensor IC
· Built-in surge protection circuit (DC types)
· Built-in reverse polarity protection circuit · Built-in reverse polarity protection circuit, overcurrent
(DC 3-wire types) protection circuit (DC types)
· Built-in overcurrent protection circuit (DC types) · Built-in surge protection circuit
· Operation indicator (red LED) · Operation indicator (red LED)
· IP67 protection structure (IEC standard) · Durable and reliable alternative to micro switches and
limit switches
· IP67 protection structure (IEC standard)

AS Series CR Series
Rectangular Inductive Proximity Cylindrical Capacitive Proximity Sensors
Sensors with Long Sensing Distance

· Long sensing distance of 50 mm · Detect various materials including metal, iron, stone,
· Excellent noise immunity with specialized sensor IC plastic, water, and grain
· Built-in surge protection circuit, reverse polarity · Long life cycle and reliable performance
protection circuit, and overcurrent protection circuits · Built-in surge protection circuit, reverse polarity
· Power supply: 12-48 VDC (operating voltage: 10-65 VDC) protection circuit (DC types)
· Simultaneous output (Normally Open + Normally Closed) · Built-in surge protection circuit (AC types)
· Power indicator (greed LED) and operation indicator (red LED) · Built-in sensitivity adjuster for easier configuration
· IP67 protection structure (IEC standard)

Autonics Product Guide

190920_Product Guide_EN.indd 12 2019-09-18 오전 10:58:05

 E15S / E18S / E20S / E30S / E40S / E50S / E58S / E68S Series
Rotary Shaft Type Incremental Rotary Encoders
Encoders

E15S E18S E20S E30S

E40S E50S E58SS E68S

(CE & UL - E18S Only)
(CE - All models except E15S, E68S)

· Encoder diameter · Low shaft moment of inertia

: 15 mm, 18 mm, 20 mm, 30 mm, 40 mm, 50 mm, · Various resolutions, output codes, control outputs,
58 mm, 68 mm and cable types available

E20HB / E40H / E58H / E60H / E80H / E88H / E100H Series

Hollow Shaft, Built-In Hollow Shaft Incremental Rotary Encoders

E20HB E40H E58H E60H

E80H E88H E100H

(Except E60H)

· Encoder diameter · Various hollow shaft sizes

: 20 mm, 40 mm, 58 mm, 60 mm, 80 mm, 88 mm, · Various resolutions, output codes, control outputs,
100 mm and cable types available

12 | 13

190920_Product Guide_EN.indd 13 2019-09-18 오전 10:58:17

 SENSORS

EP50S Series EPM50S Series

Rotary Shaft Type Ø50 mm Absolute Rotary Shaft Type Ø50 mm Multi-Turn
Encoders Encoders Absolute Rotary Encoders

· Compact size absolute rotary encoders with 50 mm · Control output types: Parallel / SSI
diameter · 23-bit (8388608) total resolution
· Various output codes available : BCD, binary, Gray - Single-turn: 10-bit (1024 divisions)
· Various resolutions, up to 1024 divisions - Multi-turn: 13-bit (8192 revolutions)
: 6, 8, 10, 12, 16, 20, 24, 32, 40, 45, 48, 64, 90, 128, 180, · Zero-point reset with single-turn data reset and multi-
256, 360, 512, 720, 1024 turn count reset functions
· IP64 protection structure (IEC standard) · CW/CCW direction setting function
· Overflow alarm (OVF) function

MGA50S / MGAM50 Series E58S / E60H Series

Shaft-Type Ø50 mm Magnetic Absolute Sine Wave Incremental Rotary Encoders
Rotary Encoders

NEW

MGA50S Series E58S Series

Single-Turn Shaft Type
E60H Series
MGAM50S Series
Hollow Shaft Type
Multi-Turn

· High accuracy in harsh environments including shock, · Analog sine wave operational amplifier (op-amp) output
vibration, dust, and humidity (compared to optical · Ø58 mm housing, tapered shaft (E58S)
sensors) · Ø60 mm housing, Ø20 mm hollow shaft (E60H)
· Longer service life compared to optical encoders · Wide operating temperature: -20°C to 100°C
· MGA50S output codes: BCD, binary, Gray · High resolution
· MGAM50S output code: binary - E58S: up to 8,000 divisions
· High resolution: up to 1,024 divisions - E60H: up to 8,192 divisions
· IP50 protection structure (IEC standard) · Power Supply: 5 VDC ±5%

Autonics Product Guide

190920_Product Guide_EN.indd 14 2019-09-18 오전 10:58:20

 ENH Series ENHP Series
Rotary Manual Handle Type Incremental Portable Manual Handle Type Incremental
Encoders Encoders Encoders

· Ideal for manual pulse input applications including NC · Ideal for manual pulse input applications including NC
machinery and milling machines machinery and milling machines
· Terminal connection type · Emergency stop switch, enable operation switch
· Resolutions : 25, 100 pulses per revolution · 6-position axis selector switch, 4-position rate selector
· Power supply : 5 VDC ±5%, 12-24 VDC ±5% switch
· Resolution : 100 pulses per revolution
· Power supply : 5 VDC ±5%, 12-24 VDC ±5%

ENC Series ERB Series

Wheel Type Incremental Rotary Encoders Flexible Shaft Couplings

· Wheel type encoders ideal for measuring length or · Zero backlash

speed of continuously moving objects · High-strength aluminum alloy (AL7075-T6)
· Output waveform of measured distance is proportional · High elasticity
to International Weights and Measures (meters/inches) · Alumite treated surface provides high corrosion
· Power supply : 5 VDC ±5%, 12-24 VDC ±5% resistance
· 2 connection types (clamp type, screw type)

14 | 15

190920_Product Guide_EN.indd 15 2019-09-18 오전 10:58:22

 CONTROLLERS

TMH Series
Temperature Modular Multi-Channel High Performance Temperature Controllers
Controllers
Versatile Modular Expansion with
Various Option Modules
The TMH series modular temperature controllers
can control multiple channels of input/
output simultaneously. The control modules
can be expanded up to 32 units and 128
channels without requiring additional wiring.
Communication modules allow further
expansion for total of 1,024 control channels.

50ms ±0.3%
Multiple Option Modules High Speed High
Channels Available Sampling Measurement
Accuracy

CURRENT
SSR
Modular Simultaneous Output RS485, Ethernet
Expansion Heating & Cooling Selection Communication
Control

[Control Modules : TMH2/4 Series] [Common Features]

· Multi-channel (2-channel/4-channel) input and output · Easy maintenance with detachable body and base
control : Expandable up to 32 units (64-channels/128- terminal
channels) · Power supply and communication with expansion
· 50 ms high-speed sampling rate and ±0.3% connectors (up to 32 units)
measurement accuracy · Parameter configuration with PCs (USB or RS485
· Simultaneous heating and cooling control function and communication) : DAQMaster software provided
auto/manual control mode (comprehensive device management software)
· Switch between current output and SSR drive output
Isolated input channels (dielectric strength: 1,000 VAC) [Also Available]
TM Series
[Option Modules] : Modular Multi-Channel PID Temperature Controllers
· TMHA : Analog Input/Output Option Modules
· TMHE : Digital Input/Alarm Output Option Modules
· TMHCT : CT Input Option Modules

[Communication Modules : TMHC]

· Allows connection of control modules (TMH2/4) and
option modules (TMHA/E/CT) to master devices (PCs,
PLCs, etc.). (Up to 16 communication modules)
· Connect up to 32 control/option modules per
communication model
· PLC ladder-less communication (RS485/RS422),
Ethernet communication

Autonics Product Guide

190920_Product Guide_EN.indd 16 2019-09-18 오전 10:58:25

 TX Series TK Series
Temperature LCD Display PID Temperature High Performance PID Temperature
Controllers Controllers Controllers
LINE UP

· Large LCD display with easy-to-read white PV characters · 50 ms high-speed sampling rate and ±0.3% display
· 50 ms high-speed sampling rate and ±0.3% display accuracy accuracy
· Switch between current output and SSR drive output · Simultaneous heating and cooling control function
· SSR drive output (SSRP function) control options · Automatic/manual control option
· Communication output model available: RS485 · Switch between current output and SSR drive output
(Modbus RTU) · SSR drive output (SSRP function) control options:
· Parameter configuration via PC (DAQ Master) ON/OFF control, cycle control, phase control
· 11-segment display for improved display of · Communication output models available: RS485
alphanumeric characters (Modbus RTU)
· Various sizes: W 48 x H 48 mm (TX4S), W 72 x H 72 mm (TX4M), · Parameter configuration via PC (DAQ Master)
W 48 x H 96 mm (TX4H), W 96 x H 96 mm (TX4L)

KPN Series TC/TCN Series

High Performance Digital Process Economical Dual/Single-Display PID
Controllers Temperature Controllers

TC Series TCN Series

Single Display Dual Display

· 50 ms high-speed sampling rate and ±0.3% display · Dual display (TCN) and single display (TC) PID
accuracy temperature controllers
· Bar graph display of control output value (mV) · 100 ms high-speed sampling rate and ±0.5% display
· High performance control (independent control outputs accuracy
for heating and cooling control, automatic/manual · Switch between relay output and SSR drive output
control mode) · SSR drive output (SSRP function) control options
· Parameter configuration through PCs (DAQMaster) : ON/OFF control, cycle control, phase control
· Multiple input types and input range · Compact design with large display panels for easier
reading
· Connector plug types offer easier wiring and
maintenance (TCN4S-□-P)

16 | 17

190920_Product Guide_EN.indd 17 2019-09-18 오전 10:58:29

 CONTROLLERS

TA Series TF3 Series

Temperature Analog Non-Indicating Type PID High Performance Refrigeration
Controllers Temperature Controllers Temperature Controllers

TFD Series
Remote Display Unit
(sold separately)

· Auto-tuning PID temperature control · Standard installation size for refrigeration panels
· PID and ON/OFF control: toggle via external switch (W 70.3 × H 28.2 mm)
· Deviation indicators (green, red LED) · Compressor load current capacity : 5 A, 16 A, 20 A
· Control output indicator (red LED) · Various user-friendly functions
· Stop control output function using analog dial - Defrost sync function : simultaneous defrost operation
· Sensor disconnect display function of multiple controllers (up to 6 units)
· Built-in microprocessor - RTC (Real Time Clock) function : night mode operation
and real-time defrost control
- Built-in alarm function
· Remote monitoring of real-time temperature and output
control (with TFD series display unit, sold separately)

TC3YF Series KT-502H Series

Refrigeration Temperature Intelligent Type Temperature
Controllers Transmitters

(Except 12-24VDC models)

· ON/OFF control · HART protocol compatibility*

· Standard input type: thermistor (NTC) · Display can be rotated 330° depending on environment
- RTD (Pt100Ω) input models available upon request conditions
· Temperature range: · DC 4-20 mA analog output (2-wire)
- Thermistor (NTC): -40.0 to 99.9 °C (-40 to 212 °F) · Various input options:
- RTD (Pt100Ω): -99.9 to 99.9 °C (-148 to 212 °F) - thermocouple (8 types), RTD: (8 types), mV (4 types),
· Various functions: auto/manual defrost selection, Ω (2 types)
compressor start-up delay, restart delay, minimum ON · Backlit display for high visibility
time, end-defrost delay, evaporator fan operation delay · Explosion-proof structure : Ex d IIC T6 (IP67)
* HART Field Communications Protocol may depend on several factors,
including calibrators, software, or firmware updates.

Autonics Product Guide

190920_Product Guide_EN.indd 18 2019-09-18 오전 10:58:31

 CT Series CX Series
Counters / Programmable Digital Counter/Timers LCD Display Counter/Timers
Timers NEW

· Integrated counter/timer unit for counting and timing · LCD display with easy-to-read white PV characters
requirements · Input type: voltage input (PNP) / no-voltage input (NPN)
· RS485 (Modbus RTU) communication (models available) selectable (through parameter setting), universal voltage
· One-shot output time: 0.01 s to 99.99 s input type available
[Counter Functions] · One-shot output time: 0.01 to 99.99 seconds
· Various input/output modes (in 0.01 second increments)
(9 input modes, 11 output modes) · Compact rear-length size (64.5 mm)
· High-speed counting up to 10 kcps [Counter Functions]
[Timer Functions] · Various input/output modes (11 input modes, 11 output modes)
· Various output modes (11 output modes) [Timer Functions]
· Wide time setting range · Various output modes (15 output modes)

FXM / FXH Series LA8N / LE8N Series

Standard Digital Counter/Timers Compact 8-Digit LCD Backlight Counters
and Timers

LA8N Series LE8N Series

Digital Counters Digital Timers

· Counting speeds : 1 cps/30 cps/2 kcps/5 kcps · Compact digital counters and timers with LCD backlight
· Switch between counter and timer operation using · Count-up/down counters with decimal point setting
DIP switch (LA8N)
· Switch between voltage input (PNP) and no-voltage · Various time specification settings (LE8N)
input (NPN) · Voltage, no-voltage, universal voltage input options
· Operation modes : count-up, count-down, count-up/down · Built-in lithium battery (operates without external power)
· Set decimal point, hr/min/sec display with RESET key · IP66 protection structure (IEC standard)

18 | 19

190920_Product Guide_EN.indd 19 2019-09-18 오전 10:58:34

 CONTROLLERS

LE365S-41 Series LE4S Series

Timers Compact Week/Year Digital Timers Digital LCD Backlight Timers

· Time configuration and control in week or year units · Compact, space-saving design with LCD backlight
· Simple configuration and status monitoring · Configure set value and time range independently
· Timer programming: (using flicker or ON-OFF delay output mode)
- Weekly : 48 steps · One-shot output time: 0.01 s to 99.99 s
- Yearly : 24 steps · Time setting range: 0.01 s to 9999 h
· Various functions including daylight savings time · Signal ON start and Power ON start options
· Independent control output (relay)

ATM Series ATS Series

Miniature Analog Timers Compact, Multi-Functional Analog Timers

ATS8W / ATS11W Series

Twin Timers

· Ultra-compact/miniature size · Simple operation analog timers with various

(W 21.5 mm x H 28 mm x D 59.3 mm) configurations
· Up to 4 simultaneous control outputs with 4PDT · Various time setting range and output operation modes
(250 VAC, 3 A) · Time setting range: 0.1 s to 30 h
· Simple and accurate timing control with analog dial · Twin timer models (ATS8W/ATS11W)
· Various timing ranges: 0.1 s to 3 h (11 available options, · Power ON start, Signal ON start, Power OFF start
by model) options

Autonics Product Guide

190920_Product Guide_EN.indd 20 2019-09-18 오전 10:58:36

 SPR1/3 Series
Power Slim Single-Phase/Three-Phase Power Controllers with LED Display
Controllers
Accurate and Stable
Power Control with
Feedback Control Option
RS485 DAQ
LED ±3% Master
Slim Size Bright LED Feedback Output RS485 Dedicated
Display Control Accuracy Communication Software SPR1 Series SPR3 Series
(Modbus RTU)

· Slim and elegant design · Parameter configuration via PCs (RS485)

· LED display allows real-time monitoring of control input, : Free device management software (DAQMaster)
load voltage, load current, load power, load resistance, · Various alarm functions (alarm output)
and heat-sink temperature : overcurrent, overvoltage, heater disconnection,
· Stable control with feedback control (constant current, fuse break, heat-sink overheat, diode (SCR) error
constant voltage, constant power) · Easy installation with mounting brackets
· Communication output models available: RS485 · Easy fuse replacement and maintenance
(Modbus RTU) · High performance SCR (IXYS) diode

DPU Series SPC1 Series

Digital Thyristor Power Controllers Single-Phase Power Controllers

· High-speed, high-accuracy digital power control with · Various control inputs : DC 4-20 mA, 1-5 VDC,
high-speed CPU external 24 VDC, external adjuster (1 kΩ), external
· Accurate feedback control (constant current, constant contact (ON/OFF)
voltage, constant power) through RMS measurement · Various functions : Output adjustment (limit output)
· Phase control for various load control and zero-cross function, soft start function (except ON/OFF control),
cycle control (fixed, variable cycles) output indicator, 50/60 Hz auto recognition
· Built-in rapid fuse for internal circuit protection · Control mode selection switch : Phase control,
· Various alarm outputs including current error or heater cycle control (zero cross turn-on), ON/OFF control
disconnection (partial disconnection detection) (zero cross turn-on)

20 | 21

190920_Product Guide_EN.indd 21 2019-09-18 오전 10:58:40

 CONTROLLERS

SR(H)2/3 Series SRHL1 Series

Solid State Three-Phase Solid State Relays (2-Pole/3-Pole) Single-Phase Solid State Relays
Relays (Integrated Heatsink, Left/Right Terminal Type)

SR2/3 Series SRH2/3 Series

· Two mounting hole types and sizes · Left/right terminal layout

· Alarm function (overheating) · Zero cross turn-on, random turn-on models available
- Alarm output indicator (red LED), disconnect standard · Input indicator (green LED)
output, alarm output · Alarm function (overheating)
· High dielectric strength: 4000 VAC (select models) - 10 A, 15 A, 20 A, 25 A : alarm indicator (red LED)
· High heat dissipation efficiency with ceramic PCB and - 40 A : alarm output, alarm output indicator (red LED)
integrated heatsink · DIN rail mount or panel mount installation

SR1 Series SRH1 Series

Single-Phase Solid State Relays Single-Phase Solid State Relays
(Detachable Heatsink Type) (Integrated Heatsink Type)

· Compact, universal design for flexible installation · DIN rail mount or panel mount installation
· Dielectric strength : 2500 VAC · High Dielectric strength : 4000 VAC (Select Models)
· High heat dissipation efficiency with ceramic PCB · High heat dissipation efficiency with ceramic PCB and
· Zero cross turn-on, random turn-on models available integrated heatsink
· Input indicator (green LED) · Zero cross turn-on, random turn-on models available
· Input indicator (green LED)

SRC1 Series SRS1 Series

Single-Phase Solid State Relays Single-Phase Solid State Relays
(Slim Detachable Heatsink Type) (Socket Type)

· Slim, compact size (22.5 mm width) · Socket type for easier installation and maintenance
· Dielectric strength : 2500 VAC - SRS1-A : Autonics SK-G05 sockets (AC, DC, AC/DC)
· High heat dissipation efficiency with ceramic PCB - SRS1-B : Universal LY2 sockets (AC)
· Zero cross turn-on, random turn-on models available - SRS1-C : Universal MY4 sockets (AC, DC, AC/DC)
· Input indicator (green LED) · Dielectric strength : 2500 VAC

Autonics Product Guide

190920_Product Guide_EN.indd 22 2019-09-18 오전 10:58:42

 SPB Series
Switching DIN Rail Switching Mode Power Supplies
Mode Power
Supplies Stable Power and High
Conversion Efficiency

Up to 92% Compact Size Low Noise Terminal Screw Mount DIN Rail Mount
Conversion and Ripple Protection Cover
Efficiency (060/120/180/
240 models)

· DIN rail mount and screw mount methods · Safety and user-friendly features
· Efficient power conversion - Terminal protection cover (SPB-060/120/180/240)
- High conversion efficiency up to 92% with LLC circuit - Easy wiring with rising clamp terminal (SPB-015/030)
(SPB-240) - Inrush current prevention, output overcurrent
- Stable power supply with minimal noise and ripple prevention, output overvoltage prevention, output
· Space efficient design short-circuit protection, circuit overheating protection
- Slim and compact size for maximum space efficiency - Low output voltage indicator (red LED), output
- Uniform depth size (except SPB-015/030) for neat and indicator (green LED)
tidy installation · Output power: 15 W, 30 W, 60 W, 120 W, 180 W, 240W

DS / DA Series
Display Units Intelligent Type Digital Display Units

Excellent Visibility and

Easy Connection

LED 64
Chatacters
DAQ
Master
Expansion Various Inputs Expandable Various High Luminance Various Dedicated
Connectors up to 24 units Display Sizes LED Characters Software
(No Soldering Req.)

· Simple wiring without soldering · Expandable up to 24 units with multi-stage connection

- Multi-stage connection using expansion connectors · Available in various sizes
or ribbon cables : 16 mm, 22.5 mm, 40 mm, 60 mm
- Power supply and data wiring required on base unit only · Available in 7-segment display and 16-segment display
· Various input options: types
Serial input, Parallel input, RS485 communication input, · Available in red display and green display types
RS485 communication time sync display, · High luminance LED display
PT temperature sensor input, PT temperature sensor + · Various unit display plates with flashing option
RS485 communication input · Display 64 unique characters (alphanumeric & symbols)

22 | 23

190920_Product Guide_EN.indd 23 2019-09-18 오전 10:58:44

 CONTROLLERS

LP-A104 / LP-A070 Series

HMIs 10.4-inch / 7-Inch Color LCD Logic Panels
NEW
All-In-One Device with PLC,
HMI, I/O Module Functions

10.4-Inch 7-Inch Space and Cost Vertical/ Screen Editor Logic

Touchscreen Touchscreen Saving Horizontal Software Programming
(LP-A104 Series) (LP-A070 Series) Setup Software

· All-in-one device including functions of PLC, HMI, · Device monitoring of connected device possible without
and I/O modules screen data
· Horizontal/vertical installation · Motion control and high-speed counting function
· Various communication interface support included
- RS232C, RS422/485, Ethernet (LP-A070) · 10.4-inch TFT LCD True Color display (LP-A104)
- RS232C, RS422/485, Ethernet, CAN (LP-A104) · 7-inch TFT LCD True Color display (LP-A070)
· 32 input and 32 output points provided (LP-A104) · Resistive touchscreen allows operation with bare hands,
· 16 input and 16 output points provided (LP-A070) gloved fingers, or stylus

GP-A104 / GP-A070 Series

10.4-inch / 7-Inch Color LCD Graphic Panels

NEW
Flexible Installation
with Horizontal or Vertical
Screen Orientation

10.4-Inch 7-Inch Vertical/ Screen Editor

Touchscreen Touchscreen Horizontal Software
(GP-A104 Series) (GP-A070 Series) Setup

· Horizontal/vertical installation · atDesigner screen editor software provided

· Various communication interface support - Various support functions, extensive image library
- RS232C, RS422/485, Ethernet (GP-A070) - Convenient user interface
- RS232C, RS422/485, Ethernet, CAN (GP-A104) · 10.4-inch TFT LCD True Color display (GP-A104)
· Device monitoring of connected device possible without · 7-inch TFT LCD True Color display (GP-A070)
screen data · Resistive touchscreen allows operation with bare hands,
· Multi-language table feature allows users to switch gloved fingers, or stylus
languages with a single button

Autonics Product Guide

190920_Product Guide_EN.indd 24 2019-09-18 오전 10:58:45

 MX4W Series MT4 Series
Panel Meters LCD Display Multi Panel Meters Digital Panel Meters

NEW

(UL-Except MT4N)

· LCD display with easy-to-read white PV characters · Various input/output options (default: indicator/no output)
· Isolated input and power modules allow powering of - Input : DC voltage, DC current, AC voltage, AC current
multiple units using a single power supply - Output : RS485 communication output, PV transmission
· Compact, space-saving design (rear-length: 20 mm) output (DC 4-20 mA), NPN/PNP open collector output,
· Various input options relay contact output
(by model - DC/AC voltage, DC/AC current) · Maximum allowed input
· Maximum allowed input: 500 VDC, 500 VAC, DC 5 A, AC 5 A : 50 VDC, DC 500 mA, 250 VAC, AC 5 A (MT4N)
· High/low-limit display scale function 500 VDC, DC 5A, 500 VAC, AC 5 A (MT4W/Y)
· AC frequency measurement (range: 0.100 to 1200 Hz) · Display range : -1999 to 9999
· Preset output: OUT1, OUT2 (NPN/PNP open collector output) · AC frequency measurement (range: 0.1 to 9999 Hz)
· Power factor display/output function

MP5 Series LR5N-B Series

Digital Pulse Meters Compact Digital Pulse Meters
(Indicator)

· 14/16 operation modes (MP5M, MP5S/Y/W) · 1-pulse input per revolution

· Various output options · Display up to 10,000RPM
· Display range: -19999 to 99999 · Built-in internal battery (power supply not required)
· Various functions: Prescale function, monitoring delay · Display RPM or RPS of rotating shaft or disc
function, hysteresis, auto-zero, parameter lock function · AC voltage frequency display function
· Various display units - rpm, rps, Hz, kHz, sec, min, m, mm, · IP66 protection structure (front panel)
mm/s, m/s, m/min, m/h, ℓ/s, ℓ/min, ℓ/h, %, counts, etc.

24 | 25

190920_Product Guide_EN.indd 25 2019-09-18 오전 10:58:47

 CONTROLLERS

KRN1000 Series
Recorders LCD Touchscreen Paperless Recorders

Cost Effective Data

Recording & Analysis
DAQ
Master
5.6” Multiple Various Inputs Communication 9 Different Reduced Dedicated
Touchscreen Channels Support Graph Types Rear-Length Software

· 5.6-inch TFT color LCD (640×480) touchscreen display · 200 MB internal memory and external memory support
with excellent visibility and intuitive control interface (SD/USB up to 32 GB)
· Supports 27 input types (thermocouple, RTD, analog · Store and backup internal data to external memory
voltage and current[shunt]) (SD/USB)
· 4 / 8 / 12 / 16 input channel models available · 9 different graph types available
· Various communication methods (USB, RS422/485, · Various option input/output available: digital input
Ethernet) supported (contact/non-contact), alarm output, transmitter power
· 25 to 250 ms high-speed sampling, 1 to 3600 s recording output
cycle · Compact, space-saving design (rear length: 69.2 mm)

KRN100 Series KRN50 Series

100 mm Hybrid Recorders 50 mm Hybrid Recorders

· Hybrid strip chart recorder + paperless recorder · 50 mm strip chart recorders with thermal transfer
· Data logger function: print saved data from internal printing
memory or USB · Data logger function for paperless recording
· Status monitoring and parameter configuration through · Real-time monitoring and configuration on PC/PLC via
USB, RS485, or Ethernet RS485 communication or dedicated communication port
· 25 ms high-speed sampling, 240 mm/H high-speed · Simultaneous 2-channel recording (graph mode, digital
recording mode)
· 100 mm strip chart recording in 6 colors · Supports various input types (RTD, thermocouple, analog)
· Supports up to 12 input channels and 27 input types

Autonics Product Guide

190920_Product Guide_EN.indd 26 2019-09-18 오전 10:58:48

 KN-1000B Series KN-2000W Series
Indicators Compact Digital/Bar Graph Indicators High Accuracy Multi-Color Indicators

· High accuracy with 16-bit ADC (±0.2% F.S.) · High accuracy with 16-bit ADC (±0.2% F.S.)
· Supports various input types (RTD, thermocouple, · Supports various input types (RTD, thermocouple,
analog) analog)
· Bar graph with 101 LEDs (green), 4-digit digital LED · Auto display color change function (errors/alarms)
display (red) · Display range: -19999 to 19999
· Various output options and customized functions · Various output options and customized functions
· Built-in power supply for sensors (24 VDC) · Built-in power supply for sensors (24 VDC)

CN-6000 Series
Converters Isolated Converters with Programmable 3-Color LCD Display

· Multiple input types: · Various output options

- CN-610: thermocouple (12 types), RTD (5 types), : Alarm output (1,2, or 4), 0-20 mA transmission output
analog (6 types: mV, V, mA) (isolated, output range setting), 0-10 VDC voltage
- CN-640: 0 to 50.00 kHz output (isolated, output range setting)
· Negative LCD display for high visibility · Various functions: high/low peak monitoring, sensor
- 12-segment, programmable 3-color display disconnection alarm output (burn-out), input correction,
(red, green, yellow) set user input range, display scale, transmission output
· Display input type and unit on display panel scale, set analog output range, etc.
· Built-in power supply for sensors (24 VDC)

26 | 27

190920_Product Guide_EN.indd 27 2019-09-18 오전 10:58:50

 MOTION DEVICES

AiC / AiC-B Series

Motion 2-Phase Closed Loop Stepper Motor System with Integrated Controllers
Devices
Easy Programming, Connection, and
Installation with Integrated Motion
Controllers
The AiC series 2-phase closed loop stepper motor
LINE UP
system features motor drivers with integrated
controllers. Direct control is possible via network
connection with master control devices, offering
easy programming, connection, and installation. The
system offers accurate and precise position control
through feedback from the integrated encoders.

Built-in Brake Integrated RS485 Control up to AiC-B Series

(AiC-B Series) Controller Type Communication 31 Axes (Brake Type)
(Modbus RTU)

AiC Series
No Hunting Closed-Loop Quick High Torque
System Response Rates

AiS / AiS-B Series

Motion 2-Phase Closed Loop Stepper Motor System
Devices
Combining the Best of Servo
and Stepper Motors

$
AiS Series AiS-B Series
(Brake Type)
No Hunting Low Price Closed-Loop Quick Response High Torque 12 Alarm Built-in Brake
(Compared to System Rates Outputs (AiS-B Series)
Servo)

· Low cost closed loop system compared to servo motors · Various encoder resolutions
with quick response rates for better continuous drive · Various alarm outputs: overcurrent, overspeed,
operation overheating, motor connection error, encoder connection
· Low vibration during low speed drive and high torque error, etc. (12 alarms)
during high speed drive · Brakes are applied during sudden power outages,
· No tuning required (easy gain setting using adjuster) allowing safe control of vertical loads (AiS-B)
· Holding torque and no vibration (hunting) during position · Frame sizes:
hold make it ideal for precision machines including - AiS : 20 mm, 28 mm, 35 mm, 42 mm, 56 mm, 60 mm
optical inspection - AiS-B : 42 mm, 56 mm, 60 mm

Autonics Product Guide

190920_Product Guide_EN.indd 28 2019-09-18 오전 10:58:53

 AK(B) / AHK / AK-G(B) / AK-R(B) Series
Motion 5-Phase Stepper Motors
Devices

AK Series AK-B Series AHK Series

Shaft Type Built-In Brake Type Hollow Shaft Type

AK-G Series AK-GB Series AK-R Series AK-RB Series

Geared Type Geared + Built-In Brake Type Rotary Actuator Type Rotary Actuator + Built-In Brake Type

· Compact design and lightweight with high accuracy, · Various types: shaft, hollow shaft, brake, geared,
speed, and torque geared-brake, rotary actuator, rotary actuator-brake type
· Space-saving design ideal for building compact-sized · Various frame sizes: 24, 42, 60, 85 mm
systems · Economical and cost-efficient

MD5 Series PMC-2HSP/N Series

5-Phase Stepper Motor Drivers 2-Axis Programmable Motion Controllers

(UL - MD5-HF14/HF28 Only)

· Bipolar constant current pentagon drive type · High-speed independent 2-axis control with processing
· Auto-current down and self-diagnosis function speed up to 4 Mpps
· Microstepping drive (max 250 divisions) · 17 control commands and up to 200 steps of operation
· Isolated photocoupler input design minimizes influence programming
from external noise · Multiple control of up to 32-axes (16 units) with RS485
· Multi-axis control (MD5-HD14-2X/3X) · 4 operation modes: scan, continuous, index, program

SYSTEM CONFIGURATION
· Multi-axis control via RS485 communication

PC Stepper Motor Drivers

Host Controller MD5-HD14-2X/3X

atMotion USB RS485 Motion Controller Stepper Motors

(Motion control software) SCM-US48I PMC-2HSP-485 AK Series
(※Converter module: sold separately) (Expandable up to 16 units) (16 Node x 2 Axis = 32 Axis)

MD5-HF14 MD5-HF28

28 | 29

190920_Product Guide_EN.indd 29 2019-09-18 오전 10:58:58

 CONNECTIVITY

ARIO Series
Field Network Slim Modular Remote I/O
Devices
Remote I/O with Diverse Communication
Protocols and Modular Expansion
The ARIO series slim remote I/O offers Ethernet/Fieldbus communication I/O
with modular expansion up to 64 units in various I/O types. The coupler modules
are available in various communication protocols. The push-in connection method
offers simple and easy wiring for improved user convenience. The hot-swap
feature allows the terminal unit and body (control) unit of NEW
the module to be disconnected from
the base (communication) unit without
stopping power or communication for
easy maintenance.

Modular Type Diverse Slim Size Max.

Communication I/O Modules
Support

Push-In Hot-swap Status LED Dedicated

Connection Software

atMotion
· Industrial Ethernet/Fieldbus serial communication I/O [Also Available]
for Smart Factory ARM / ARD Series
· Multiple I/O distribution control using PLCs and : Modbus RTU / DeviceNet Remote I/O
industrial PCs.
· Coupler: available in 8 different communication protocols
- EtherCAT, CC-Link, ProfiNet, ProfiBus, EtherNet/IP,
DeviceNet, Mobus TCP compatible, Modbus RTU
compatible
· Module: various input/output modules, power module
- Remote bus I/O power, digital input/output (4/8 channels),
analog input/output (2/4 channels) (DeviceNet - ARD only)
- Expandable up to 64 modules (may vary by
communication type) [ARM Series]
· Hot-swap feature · Modbus RTU protocol digital remote I/O
- Terminal and body units can be removed/swapped (sensor connector type)
during operation for easy maintenance [ARD-D Series]
· Push-in connection method: easy wire connection · DeviceNet digital remote I/O
without requiring additional tools (terminal block type/sensor connector type)
· Comprehensive device management software
[ARD-A Series]
DAQMaster for improved convenience
· DeviceNet analog remote I/O (terminal block type)
- Module settings, real-time control / monitoring /
diagnosis of input / output signals
· Virtual mode allows simulation of product set up and
offers set up recommendations
Autonics Product Guide

190920_Product Guide_EN.indd 30 2019-09-18 오전 10:59:08

 AFL / AFR / AFS Series ACL / ACR / ACS Series
I/O Terminal Interface Type Common Type
Blocks

AFL Series AFR Series ACL Series ACR Series

Screwless Push-In Type Rising Clamp Type Screwless Push-In Type Rising Clamp Type

AFS Series ACS Series

Standard Type Standard Type

ABL / ABS Series

Relay Type

ABL Series ABS Series

Screwless Type Standard Type

ASL Series AFE Series

Solid State Relay Type Sensor Connector Type

SYSTEM CONFIGURATION
Proximity Sensor
PR Series
Power Input Input Output Output Communication Twisted Pair Cable Photoelectric Sensor
BJ Series

Modbus Digital Remote I/O Sensor Connector Type Fiber Optic Sensor
ARM-D□□□-4S (Base Unit) BF5 Series
ARX-D□□□-4S (Expansion Unit)

I/O Cable for Connecting

Relay Terminal Block Relay Terminal Block
I/O Terminal Blocks and PLCs
ABS-S04 ABS-S01 Relay Terminal Block
ABS-H16

Relay Terminal Block

ABS-H32

Sensor Connector Terminal Block

AFE-H20

Interface Terminal Block

AFS-H40

30 | 31

190920_Product Guide_EN.indd 31 2019-09-18 오전 10:59:10

 PT Series
Distribution M12 Connector Sensor Distribution Boxes
Boxes
Diverse Options
for Easy Sensor
Connectivity * PT-P (plug-in terminal type), PT-S (spring terminal type)
series available in black and blue models.

· Available models: · Supply power to multiple sensors using a single power

- 5-pin M12 connector types (cable/spring terminal/ supply
plug-in terminal type) · Simplify complicated wiring and maintenance work
- 4-pin M12 connector type sensor distribution boxes · Check operation status with LED indicators (green, red LED)
(cable type) · Supports 1-signal, 2-signal (DC 4-wire type)

CH / CO Series
Cables I/O Cables LINE UP

Customizable
Cable Options

DAQMaster (Standard / Pro)

Software Comprehensive Device Management Program

DAQMaster

[DAQMaster Standard / Pro Version Common Features] [DAQMaster Pro Version Features]
· Multiple device support · Modbus device editor
· Scan for devices · Trigger event, scheduler
· Simple user interface · Push server
· Project management · Database management
· Data analysis using grids or graphs · TCP/IP server
· Log monitoring data · OPC server/client
· Edit tag formulas · DDE server/client
· Print Modbus Map Table report · Fieldbus master
· Modbus slave
Autonics Product Guide

190920_Product Guide_EN.indd 32 2019-09-18 오전 10:59:19

 CONTROL SWITCHES

Round/Square
Push Button
Switches
(*) Illuminated Type Available
S16PR-E□(*) S16PRS-H□(*) S16PRT-H□(*) S2PR-P1□ S2PR(U)-P3□(*)

S2PR(U)-E□(*) S2PRS(U)-P□(*) S3PR-P1□ S3PF(U)-P□(*) SQ3PFS(U)-P□(*)

Selector
Switches
(*) Illuminated Type Available

S2SR-S S2SRN-□
S16SR-S□(*) S16SRS-L□(*) S16SRT-S□(*)
1/3/5/7/A/C□ 1/3/5/7/A/C□(*)

S2SR-S S2SRN-□ S3SF-S S3SFN-□ S3SF-S S3SFN-□

2/4/6/8/B/D□ 2/4/6/8/B/D□(*) 1/3/5/7/A/C□ 1/3/5/7/A/C□(*) 2/4/6/8/B/D□ 2/4/6/8/B/D□(*)

Pilot Lights
(*) Illuminated Type Available

L16RR-E□(*) L16RRS-H□(*) L16RRT-H□(*) L2RR-L1(*) L2RR-L2(*)

L2RR(U)-L3(*) L2RR(U)-L4(*) L3RF(U)-L3(*) LQ3RF(U)-L4(*)

32 | 33

190920_Product Guide_EN.indd 33 2019-09-18 오전 10:59:22

 (UL - except emergency switches, buzzers)

Key Selector
Switches

S16KR-□ S16KRS-□ S16KRT-□ S2KR-□ S3KF-□

Emergency
Switches
(*) Illuminated Type Available

S16ER-E□(*) S2ER-E1□ S2ER-E2□ S2ER-E3□ S2ER-E4□(*) S2ER-E5□

Double Mushroom-
Push Button Head
Switches Push Button
(*) Illuminated Type Available
Switches S2BR-P1□
S2TR-P3(*) S16BR-H□(*)
(*) Illuminated Type Available

Buzzers

B6MA Series B2PB-B1D Series B2NB-B1D Series

Melody Buzzer Piezo Buzzer Magnetic Buzzer

Accessories Emergency Switch Emergency Switch

Nameplates
Switch Contact/LED Blocks Protective Shrouds Switch washer

* Ø16 mm * Ø22/25, Ø30, □30 mm

Locking Handle for

Waterproof Cap Switch Enclosures Switches Lens removal tool

* Ø16 mm

* Ø22/25, Ø30,
□30 mm
* Ø16 mm

Autonics Product Guide

190920_Product Guide_EN.indd 34 2019-09-18 오전 10:59:28

Autonics Tower Light / Signal Light /
Electronics Sirens

o er Lights Signal Lights Electronics Sirens

o er lights, Signal lights, Electronic sirens are re entl se in in strial settings to o er is al an a io stat s in ication o
control rocesses an a lications

34 | 35
 Toll Free : 1800-220-899
Your Global Partner in Industrial Automation
WhatsApp
Autonics India +91-81081 12205

Uttar Pradesh Region

Plot No.D-28/9, TTC MIDC Turbhe, Navi Mumbai-400705 (Sales Technical Support)
Tel. : (022) 27682570 / 1800 220 899 Email: [email protected] • Tel: 9818003714
Email : [email protected]
Haryana Region
(Sales Technical Support)
Delhi Office Faridabad: - Email: [email protected] • Tel: 9654003343
SCO 39, 3rd Floor, Sector 12A, Huda Market, Gurgaon: - Email: [email protected] • Tel: 9136930530
Old Delhi, Gurgaon Road, Gurgaon - 122001.
National Capital Region, Delhi
Rajasthan Region
Tel.: +91-98-18003754 / (0124) 4053891
(Sales Technical Support)
Email: [email protected]
Email: [email protected] • Tel: 7357018010

Ahmadabad Office Punjab Region

217, 2nd floor, Trade Square, Khokhra Circle, (Sales Technical Support)
Maninagar (E), Ahmedabad-380026, Gujarat. Email: [email protected] • Tel: 9136930531
Tel.: +91-99-09959417 / (079 29706332),
Email: [email protected] Gujarat & MP Region
(Sales Technical Support)
Rajkot: - Email: [email protected] • Tel: 9909959417
Pune Office Vadodara: - Email: [email protected] • Tel: 9909959418
Shop F-107, Ashoka Mall, Bund Garden Road, South Gujarat:- Email: [email protected] • Tel: 9909959471
Opp. Sun N Sand Hotel, Pune - 411001.
Tel.: 020-66202602 • Email: [email protected]
Mob.: 8108117975 / 8108117976 Mumbai & Kolkata Region
(Sales Technical Support)
Email: [email protected] • Tel: 8108119091
Chennai Office Email: [email protected] • Tel: 8422974705
The Roses Old No:78,New No:24,(1st Floor),
Railway Station Road,Alandur Chennai-600016 Nashik & Aurangabad Region
Tel.: +91-87-54573963 / 54573948 (Sales Technical Support)
Email: [email protected] Email: [email protected] • Tel: 9323618620

Hyderabad Region
Bangalore Office (Sales Technical Support)
Email: [email protected] • Tel: 91369 45034
Autonics Automation India Pvt. Ltd.
Rathnavanshi Complex, No. 14 (Second Floor), Shivanagar,
5th Main, WOC Road, Rajajinagar, Bangalore – 560010 Coimbatore Region
Email: [email protected] • Tel.: 91-99-45006260 (Sales Technical Support)
Email: [email protected] • Tel: 87545 73895

+91 9136930531

+91 9136930530
+91 9818003754
+91 7357018010

+91 9909959471

+91 9909959417

+91 8108119091 +91 8108117975

+91 91369 45034

+91 9945006260 +91 8754573963

+91 87545 73895

For Technical Support : TOLL FREE & 1800 220 235 • Email: [email protected]
For A/S Support : TOLL FREE & 1800 220 235 • Email: [email protected]

NO.20191203_ENG_Product Guide_India V08