Scribd
Upload
273 views3 pages

Lesson Plan in Carpentry 7

This lesson plan outlines a carpentry class that will teach students about tools and materials used in carpentry. The objectives are for students to be able to identify, define, explain the uses of, actively participate in class discussion about, and appreciate the value of carpentry tools and materials. The lesson proper involves students classifying different tools and materials like hammers, saws, and nails. It also discusses what would happen in carpentry without these tools. Students will then match tools with their proper materials in an evaluation activity. For homework, students are asked to list 10 personal protective equipment used in carpentry.

Uploaded by

wels berd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
273 views3 pages

Lesson Plan in Carpentry 7

This lesson plan outlines a carpentry class that will teach students about tools and materials used in carpentry. The objectives are for students to be able to identify, define, explain the uses of, actively participate in class discussion about, and appreciate the value of carpentry tools and materials. The lesson proper involves students classifying different tools and materials like hammers, saws, and nails. It also discusses what would happen in carpentry without these tools. Students will then match tools with their proper materials in an evaluation activity. For homework, students are asked to list 10 personal protective equipment used in carpentry.

Uploaded by

wels berd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Lesson plan In Carpentry 7

Submitted by; ALIX MONTILLA GAAS

Submitted to Mr.EDDIE D ARAYAN Principal 1 Republic of the Philippines

Department of Education Caraga Administrative Region Tagbina District 2 Manambia Integrated


School

Lesson plan In CARPENTRY 7 I.

Objectives; At the end of 60 minutes discussion 80% of the students should be able to do the
following competencies and standards; A. B. C. D. E.

II.

Identify the different kinds of tools and materials use in carpentry Define tools and materials use
in carpentry Explain the uses of tools and materials use in carpentry Participate actively and
willingness in class discussion Appreciate the value of carpentry in human race.

Subject matter A. Topic; tools and materials use in carpentry B. Reference; 1. Website; link
content http://www.depedbataan.com/resources/9/k_to_12_carpentry_learning_modu les.pdf C.
Instructional materials: Chart of tools and equipment D. Hammer

Levelbar Tri square

Rip saw

Cross cut saw

push pull rule

Plumb bob

lumber

Hack saw

nails

III.

IV.

Lesson Proper 1. Preliminary-activity A. Greeting Good morning Good morning sir and ma’am
May I request everybody to stand for the guidance of our almighty B. Opening prayer C.
Checking of attendance For the boys: Who is/are absent today For the girls Who is absent
today D. Review (optional) Our second quarter examination is more interesting but now in
carpentry is more fun in learning would u agree? E. Motivational Did you see some tools and
materials in carpentry? Did you touch the tools? After you touch did you experience to you use
the tools? F. Developmental Lesson A. Activity (fix me now)assemble the cut picture after you
fixed and present it to the classmates what did know about the tools or materials. B. After the
report I am going to rise the the various colors with the corresponding means white color means
silence, blue color means modified soldier clap white and blue means ends. The student will
classify the different types of tools and materials 1. Pull-push-rule - used for measuring long
distances After report by group 1( blue color)

2. Claw hammer - used for driving and pulling out nails After report by group 1( blue color)

3. Cross-cut-saw - tool used for cutting across the grain After report by group 1( blue color)

4. Ripsaw - used for cutting along the grain After report by group 1( blue color)

5. Plumb-bob - used for vertical alignment After report by group 1( blue color)

6. Try square - used to test the squareness of a stock After report by group 1( blue color)

7. Hack saw - fine toothed saw used to cut metals and pipes After report by group 1( blue color)

8. Level bar - tool used in checking vertical and horizontal position After report by group 1( blue
color)

9. Lumber - sawn Timber After report by group 1( blue color)

10. Nails - made of metal used for fastening woods After report by group 1( blue color)

C. Analysis/discussion The teacher will ask the student, what if there are no tool and equipment.
In the a school. House and other establishment. what happen to the field of carpentry? Pull-
push-rule - used for measuring long distances / can we measure Claw hammer - used for
driving and pulling out nails/can we pulled thing around it Cross-cut-saw - tool used for cutting
across the grain/ can we cut accordingly Ripsaw - used for cutting along the grain/ can we cut
properly Plumb-bob - used for vertical alignment/ can we secure perfect alignment Try square -
used to test the squareness of a stock/ can we see perfect squareness Hack saw - fine toothed
saw used to cut metals and pipes/ can we cut metals Level bar - tool used in checking vertical
and horizontal position/ can we distinguish vertical alignment Lumber - sawn Timber/ can we
construct small thing without it? nails - made of metal used for fastening woods/ can we fixed
just things?

D. Abstraction/generalization In your simple life now a days what is the importance of carpentry
in your life. after

E. Application Paste me now( the students get the posted picture and post it under the two
column Tools
materials

V.

Evaluation Column a

1.Pull-push-rule 2. Claw hammer 3Cross-cut-saw 4. Ripsaw 5. Plumb-bob 6. Try square 7. Hack


saw 8. Level bar 9Lumber 10. Nails

Mach the column A to column B Column B a. made of metal used for fastening woods b. sawn
Timber c.tool used in checking vertical and horizontal position d. fine toothed saw used to cut
metals and pipes e used to test the squareness of a stock f. used for vertical alignment g used
for cutting along the grain h. tool used for cutting across the grain i. used for driving and pulling
out nails j. used for measuring long distances

IV. Assignment For the next topic; Give at list 10 personal protective equipment use in carpentry
works and their functions.

You might also like