Scribd
Upload
165 views

FR2375C

The document describes Formolene FR2375C, a low density polyethylene resin without slip or antiblock additives intended for film applications. It provides nominal properties for films made from the resin such as tensile strength, elongation, gloss and haze. Suggested applications include various types of packaging films.

Uploaded by

Danitsa Fiorella Silvestre Bautista
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
165 views

FR2375C

The document describes Formolene FR2375C, a low density polyethylene resin without slip or antiblock additives intended for film applications. It provides nominal properties for films made from the resin such as tensile strength, elongation, gloss and haze. Suggested applications include various types of packaging films.

Uploaded by

Danitsa Fiorella Silvestre Bautista
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Formolene® FR2375C

Fractional Melt LDPE Resin with no Slip or Antiblock


Formolene® FR2375C is a low density polyethylene with films exhibiting good stiffness and optical
properties. Formolene® FR2375C is formulated without slip and antiblock for use in film applications
offering excellent extrusion processing and very good balance of mechanical and optical properties.

Formolene® FR2375C meets all requirements of the U.S. Food and Drug Administration as specified in 21
CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

Suggested Applications:
Agricultural Film Collation Shrink Medium Duty Shrink Film
Blend Partner Freezer Film Shoppers
Co-Extrusion Lamination Film Form Fill and Seal Packaging

Nominal Physical Properties:


TEST
PROPERTY METHOD UNIT VALUE
Density D1505 g/cc 0.923
Melt Index, Condition E, 190C°/2.16 kg D1238 g/10 min 0.75
Dart Impact D1709 g 180
Elmendorf Tear Strength D1922 g 350/150*
Tensile Strength at Break D882 psi 4000/3200*
Elongation at Break D882 % 310/530*
Secant Modulus @ 1% D882 psi 35000/40000*
Gloss (45°) D2457 59
Haze D1003 % 8.4
* MD / TD

Note: Film properties based on 1.97 mil (50 micron) thick film produced using a 7.9 inch (200 mm) die and 39.4 mil
(1.0 mm) die gap with a 2.5:1 Blow-Up Ratio and temperature profile of 356 - 374°F (180 - 190°C). Actual film
properties may vary based on extrusion equipment, operating conditions and additive package. Film properties are
not intended to be used as specifications.
Published 12/1/2020

02/20

You might also like