HPE
6127XLG-CMW710-SYSTEM-WEAK-R2432
P06H12 Release Notes
The information in this document is subject to change without notice.
© Copyright 2018 Hewlett Packard Enterprise Development LP
Contents
Hot patch and system software matrix ··················································1
Patch installation advice ····································································1
Restrictions and cautions ···································································1
List of resolved problems ···································································2
Resolved problems in R2432P06H12······························································································· 2
Installing the hot patch ······································································2
Preparations ······························································································································· 2
Downloading the hot patch to device································································································ 4
Installing the hot patch ·················································································································· 5
Logout and then login the device····································································································· 5
Verifying the installation ················································································································ 6
i
List of Tables
Table 1 Hot patch and system software matrix .......................................................................................... 1
Patch installation advice............................................................................................................................. 1
ii
This document describes how to apply the R2432P06H12hot patch to the R2432P06 device. The
R2432P06H12 hot patch is only applicable to the R2432P06 software version.
Hot patch and system software matrix
Table 1 Hot patch and system software matrix
System
Hot patch Release
Hot patch file software Device Remarks
version date
version
6127XLG-CMW 6127XLG-CMW71
710-SYSTEM- 0-SYSTEM-WEA 6127XLG-CMW 6127XLG 2020-12-3
Fix bug
WEAK-R2432P K-R2432P06H12. 710-R2432P06 Series 1
06H12 bin
Patch installation advice
Use Table 2 to make a patch installation decision. The following are installation advice options for a
patch version:
• Required—The patch version resolves major issues and must be installed.
• Optional—The patch version resolves occasional issues and can be installed at discretion of the
network administrator.
• Restricted—The patch version resolves customer-specific issues and is intended only for the
target customer.
Typically, a patch version resolves both issues that were resolved by its history versions and issues
that were newly found. However, the installation advice for a patch version takes into account only
issues that were newly found.
Patch installation advice
Require Optiona Restricte Remark
Patch file
d l d s
6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12.b
× None
in
Restrictions and cautions
1. After the install activate command is used to install the patch, the patch takes effect only on
the currently running system. To make the patch take effect after the device is restarted, you
must execute the install commit command. For more information about the install command,
see ISSU commands in Fundamentals Command Reference.
1
List of resolved problems
This section lists all the problems that the hot patch can solve. The problems that can be solved by
both the hot patch and an earlier hot patch are listed under that earlier hot patch.
Resolved problems in R2432P06H12
202012230137
• Symptom: The device reboots unexpectedly.
• Condition: This symptom occurs with a low probability when the device is operating.
Installing the hot patch
Preparations
CAUTION:
• The hot patch must match the device model and system software. Otherwise, hot patching will fail.
• If a card has been patched, you must uninstall the previous patch before you can install the new patch.
A hot patch is a .bin file that contains patch files released at the same time for different cards.
It is typically named in the form product name-platform version-software version numberHpatch
number, such as 6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12.bin.
Before installation, read the patch release notes carefully to get clear information about patch type,
number of patches, and patch usage guidelines, and save the hot patch into the root directory of the
flash on the active.
# Display device information. (The output may vary with switches.)
<HPE>display irf
MemberID Role Priority CPU-Mac Description
*2 Master 1 00e0-fc00-5801 ---
+6 Standby 1 00e0-fc66-5801 ---
--------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.
The Bridge MAC of the IRF is: 00e0-fc12-5801
Auto upgrade : yes
Mac persistent : 6 min
Domain ID : 0
The output shows that the switch is an IRF fabric that comprises two switches.
2
# Check the free storage space on the master device.
<HPE>dir
Directory of flash:
0 drw- - Jan 01 2011 03:45:59 diagfile
1 drw- - Jan 01 2011 03:45:59 license
2 drw- - Jan 01 2011 03:45:59 logfile
3 -rw- 8517632 Dec 28 2012 10:33:05 6127xlg-cmw710-boot-r2432p06.bin
4 -rw- 309248 Jan 01 2011 03:47:27 6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12
.bin
5 -rw- 75298816 Dec 28 2012 10:33:05 6127xlg-cmw710-system-r2432p06.bin
6 drw- - Jan 01 2011 03:45:59 seclog
7 drw- - Jan 01 2011 03:48:01 versionInfo
524288 KB total (449928 KB free)
# Check the free storage space on the standby device.
<Sysname> dir slot6#flash:/
Directory of flash:
0 drw- - Jan 01 2011 03:45:59 diagfile
1 drw- - Jan 01 2011 03:45:59 license
2 drw- - Jan 01 2011 03:45:59 logfile
3 -rw- 8517632 Dec 28 2012 10:33:05 6127xlg-cmw710-boot-r2432p06.bin
4 -rw- 309248 Jan 01 2011 03:47:27 6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12
.bin
5 -rw- 75298816 Dec 28 2012 10:33:05 6127xlg-cmw710-system-r2432p06.bin
6 drw- - Jan 01 2011 03:45:59 seclog
7 drw- - Jan 01 2011 03:48:01 versionInfo
524288 KB total (449928 KB free)
If the free storage space is not enough for storing the hot patch, delete undesired files with the
delete/unreserved command. In IRF mode, you need to check the free storage space on the master
device and standby device to make sure that each device has enough space to store the hot patch.
The delete /unreserved file-url command deletes a file permanently and the action cannot be
undone.
The delete file-url command moves a file to the recycle bin and the file still occupies storage space.
To permanently delete the file from the recycle bin, execute the reset recycle-bin command in the
original directory of the file.
# Use the display install active command to check whether the device have been patched and view
patch running status.
<HPE> display install active
Active packages on slot 2:
flash:/6127xlg-cmw710-boot-r2432p06.bin
flash:/6127xlg-cmw710-system-r2432p06.bin
flash:/6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12.bin
Active packages on slot 6:
flash:/6127xlg-cmw710-boot-r2432p06.bin
flash:/6127xlg-cmw710-system-r2432p06.bin
3
flash:/6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12.bin
The output shows that each board has a running patch. Use the install deactivate command to
uninstall the patch.
# Uninstall the patch.
<HPE>install deactivate patch flash:/6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12.bin
slot 2
# Check whether the uninstallation is successful.
<HPE> display install active
Active packages on slot 2:
flash:/6127xlg-cmw710-boot-r2432p06.bin
flash:/6127xlg-cmw710-system-r2432p06.bin
Active packages on slot 6:
flash:/6127xlg-cmw710-boot-r2432p06.bin
flash:/6127xlg-cmw710-system-r2432p06.bin
flash:/6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12.bin
The output shows that the patch on slot 2 has been uninstalled successfully, the patch on slot 6 need
to be uninstalled too.
# Uninstall the patch on other slot.
<HPE>install deactivate patch flash:/6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12.bin
slot 6
# Check whether the uninstallation is successful.
<HPE> display install active
Active packages on slot 2:
flash:/6127xlg-cmw710-boot-r2432p06.bin
flash:/6127xlg-cmw710-system-r2432p06.bin
Active packages on slot 6:
flash:/6127xlg-cmw710-boot-r2432p06.bin
flash:/6127xlg-cmw710-system-r2432p06.bin
The output shows that the patch on all the devices has been uninstalled successfully.
Downloading the hot patch to device
Skip this section if the hot patch has been downloaded to the device.
You can download the hot patch through FTP or TFTP. The device can act as the FTP server, FTP
client, or TFTP client. The details information for how to download file to device refer to the release
notes document. The following describes how to download the hot patch when the switch works as
the FTP client.
1. Configure the management port and connect to PC with management port:
a. Switch to management interface.
[HPE]interface M-GigabitEthernet 0/0/0
b. Configure an IP address for connection.
4
[HPE-M-GigabitEthernet0/0/0]ip address 10.153.104.216 24
c. Quit to user interface.
[HPE-M-GigabitEthernet0/0/0]quit
[HPE]quit
2. Download the hot patch from the FTP server
a. Log in to the FTP server.
<HPE>ftp 10.153.104.65
Connected to 10.153.104.65 (10.153.104.65).
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User (10.153.104.65:(none)): aaa
331 Give me your password, please
Password:
230 Logged in successfully
Remote system type is MSDOS.
b. Specify the file transfer mode as binary.
ftp> binary
200 Type is Image (Binary)
c. Download the hot patch to the root directory of the flash on the switch.
ftp> get 6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12.bin
227 Entering Passive Mode (10,153,104,65,9,72)
150 "D:\FTP\6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12.bin" file ready to send (53
7600 bytes) in IMAGE / Binary mode
226 Transfer finished successfully.
537600 bytes received in 1.42 seconds (368.9 kbyte/s)
Installing the hot patch
Follow these guidelines when you install the hot patch:
• You must use the install activate patch filename command to install the hot patch.
# Install the hot patch.
<HPE>install activate patch flash:/6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12.bin s
lot 2
# Install the hot patch to standby device.
<HPE>install activate patch flash:/6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12.bin s
lot 6.
Logout and then login the device
#After install the patch, need logout and then login the device.
<Sysname>quit
Line aux1/1 is available.
Press ENTER to get started.
5
Verifying the installation
# Display patch information.
<HPE>display install active
Active packages on slot 2:
flash:/6127xlg-cmw710-boot-r2432p06.bin
flash:/6127xlg-cmw710-system-r2432p06.bin
flash:/6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12.bin
Active packages on slot 6:
flash:/6127xlg-cmw710-boot-r2432p06.bin
flash:/6127xlg-cmw710-system-r2432p06.bin
flash:/6127XLG-CMW710-SYSTEM-WEAK-R2432P06H12.bin
#The output shows that the patches have been installed successfully.
#For the patch to survive a reboot, you must execute the install commit command after the patch
installation.
<HPE>install commit
