MADRAS METALLURGICAL SERVICES
Ref: SA/Qtn/Met. Lab-Eqpts. Date: 29.04.2023
To,
Shiva Alloys
Village Kumbh, Amloh Road,
Mandi Gobindgarh – 147 301 Email: [email protected]
Kind Attn : Mr.Bhardwaj – 98152-38232
Dear Sir,
Sub: Offer for Met. Lab Equipments.
Ref: Your email enquiry dt : 17.04.2023
We thank you for your discussion and as required by you, we are enclosing our offer for Met. Lab Equipments. If you require
any further information please feel free to contact us and we assure you
of our best services.
Thanking You,
For Madras Metallurgical Services Pvt.Ltd,
sp
----------------------------------------------------------------------------
Sl.No. Description Unit Price in Rs.
----------------------------------------------------------------------------
1.a) TRINOCULAR INVERTED METALLURGICAL MICROSCOPE, MODEL: DMI VICTORY
Trinocular Observation Head
Siedentopf observation head inclined at 45°.
Diopter adjustment ring on ocular tube (±5).
Interpupillary distance from 53mm to 75mm.
Focusable vertical tube for Digital Microphotography.
Eyepiece (Anti fungus)
Wide field10X (paired) F.O.V. 22mm.
Objectives (Infinity corrected)
M Long working distance plan 5X
M Long working distance plan 10X
M Long working distance plan 20X
M Long working distance plan 50X
M Long working distance plan 100X (S.L.) Dry
Illuminator
Epi-Koehler’s illumination. Aperture iris diaphragm and field iris diaphragm
12V/50W halogen lamp. Adjustable brightness. Filter wheel fixed in light path
with blue, green & yellow filters.
Mechanical Body
Co-axial focusing system with large knobs, PRE-FOCUSING LEVER &
TENSION ADJUSTMENT RING.
Quintuple nosepiece on ball bearing.
Mechanical stage is 210mm X 180mm and moving range50mmX50mm
Mechanical stage has low positioned co-axial controls on ball bearing guide ways.
Upper port with phototube for micro photography.
Standard Accessories
12V/50W halogen tungsten bulb, operating manual, dust cover, guarantee
card and Styrofoam molded pack.
b) DIGITAL USB CMOS MICROSCOPE CAMERA MODEL: DGI 510
Features:
5.0 megapixels with progressive scanning CMOS image sensor.
No compression, no interpolation.
Support still image capture(JPG,BMP)
MADRAS METALLURGICAL SERVICES
Standard C-Mount makes connection to any microscope easy. Macro lens setups are also supported
Resolution: 2592X1944(8bit);480 Mibt/Sec,DC5V±5%
Pixel size : 2.2mmX2.2mm.
Frame Rate .8fps@2592X1944
30 fps@640 ×480 Auto White Balance.
Shutter Electronic10μs–32ms,Auto exposure
Operating Temp: 0°C ~ 60°C
c) DEWINTER MATERIAL PLUS 4.5 SOFTWARE
(Catalog as per enclosed)
Price for the above Rs.2,25,000.00 Each
Kindly Note: Computer is not included in the supply.
2. Variable Speed Double Disc Grinder / Polisher, Model FINEPOL – 2 / 200
200mm Diameter Double Disc Grinder / Polisher.
Variable speed from 50 – 800 RPM.
Rigid Table Top Corrosion resistant FRP cabinet fully covered.
Corrosion resistant wash bowls with free flow drain.
Motor and disc pulleys are made of die cast aluminium for rust proof.
Nylon belt used to rotate disc for long life.
0.5 HP PMDC motor. Thyresistor control variable speed D.C drive.
Feather touches front panel board, LCD Display for speed and time.
Speed and timer controlled by micro controller based embedded technology with
pre-programmed electronic control unit.
Flexible water jet with control valve.
Aluminium disc 200mm Dia. – 2Nos.
Cloth holding spring – 4 Nos.
Aluminium alloy holding ring (Press type) – 2 Nos.
Price for the above Rs.75,000/-each
3. FINELINE – 1 Belt Grinder.
Sturdy Table top end model with dust removal tray for coarse grinding of Metallographic samples.
Single station model.
0.5HP Single phase motor, 1440 rpm.
Constant tension spring loaded idler pulley mechanism
Simplified belt releasing mechanism Easy access for belt removal,
100 X 915mm size Endless Belt.
Price for the above Rs.38,000/-each
TERMS & CONDITIONS
01. Prices : Item-1-Ex-Works-Delhi, Item-2 & 3-Ex-Works-Chennai,
5% Packing & Forwarding, Freight and Insurance charges extra.
MADRAS METALLURGICAL SERVICES
02. Taxes : GST @18% will be charged extra.
03. GSTIN NO : 33AAACM2628M1ZI.
04. Payment : 50% advance and balance against proforma invoice.
05. Delivery : Within 4-6 weeks on receipt of your firm order with advance.
06. Commissioning charge : Commissioning will be charged extra plus @18% central service tax at the
time of supply of the equipment.
07. Guarantee : The equipment/instrument offered to you is guaranteed for a period
of ONE YEAR from the date of supply against any manufacturing
defect or Faulty workmanship. However glass parts heating elements,
electrical Parts etc are not guaranteed.
08. Jurisdictions : Any dispute arising out of sales shall be subject to Madras
Jurisdiction only.
09. Validity : Our offer is valid for a period of ONE MONTH from the above date.
For Madras Metallurgical Services Pvt. Ltd,
