DATA SHEET
5 FRAME PLUNGER PUMPS
Standard Models: 310, 340, 350
Special Brass 310B, 340B, 350B
Models:
SPECIFICATIONS U.S. Measure Metric Measure
310, 310B Belt Drive
Flow 4.0 gpm 15 lpm
Pressure Range 100 to 2200 psi 7 to 152 bar
Pump RPM 950 rpm 950 rpm
Inlet Pressure Range -5 to 60 psi -0.35 to 4 bar
Stroke 0.709" 18 mm
340, 340B Direct Drive
Flow 4.0 gpm 15 lpm
Pressure Range 100 to 1800 psi 7 to 124 bar
Pump RPM 1725 rpm 1725 rpm
Inlet Pressure Range Flooded to 60 psi Flooded to 4 bar
Stroke 0.394" 10 mm
Model 310 Shown
350, 350B Direct Drive
(Rails and Shaft Protector Sold Separately) Flow 5.0 gpm 19 lpm
Pressure Range 100 to 1500 psi 7 to 103 bar
Pump RPM 1725 rpm 1725 rpm
FEATURES Inlet Pressure Range Flooded to 60 psi Flooded to 4 bar
• Triplex design offers high efficiency and low pulsation. Stroke 0.472" 12 mm
• Durable high pressure seals are lubricated and cooled by pumped liquid. ALTERNATE
U.S. Measure Metric Measure
•P
re-set Lo-Pressure Seals provide secondary protection against external SPECIFICATIONS
leaks and require no packing adjustment. 310, 310B
•A
lternate crankshaft strokes offers flexibility with belt, clutch or direct- Flow 5.0 gpm 19 lpm
drive installation. Pressure Range 100 to 1500 psi 7 to 105 bar
Pump RPM 1190 rpm 1190 rpm
• S tandard NBR seals with alternative options for temperature and
chemical compatibility
• FPM – .0110 ELECTRIC HORSEPOWER REQUIREMENTS
• EPDM – .0220 MODELS FLOW PRESSURE MOTOR PULLEY SIZE
• High Temp, 190°F – .3000 psi psi psi psi psi Using 1725 RPM Motor
1200 1500 1800 2000 2200 & Std. 8" Pump Pully
U.S. bar bar bar bar bar
lpm RPM Pulley O.D.
gpm 82 103 124 138 152
COMMON 310 4.0 15 3.3 4.1 5.0 5.5 6.0 950 4.4
SPECIFICATIONS U.S. Metric Alternate 5.0 19 4.1 5.1 N/A N/A N/A 1190 5.5
Bore 0.787" 20 mm 340 4.0 15 3.3 4.1 5.0 N/A N/A 1725 Direct Drive
350 5.0 19 4.1 5.1 N/A N/A N/A 1725 Direct Drive
Standard Liquid Temperature 160°F 71°C
Above 130°F call Cat Pumps for inlet conditions and elastomer recommendations.
DETERMINING Rated gpm = “Desired” gpm
Crankcase Capacity 18 oz. 0.55 l THE PUMP R.P.M. Rated rpm “Desired” rpm
Inlet Ports (2) 1/2" NPT(F) 1/2" NPT(F) DETERMINING gpm x psi = Electric Brake
Discharge Ports (2) 3/8" NPT(F) 3/8" NPT(F) THE REQUIRED H.P. 1460 H. P. Required
Shaft Diameter 0.787" 20 mm DETERMINING Motor Pulley O.D. = Pump Pulley O.D.
Weight 19.8 lbs. 9 kg MOTOR PULLEY SIZE Pump rpm Motor rpm
See complete Drive Packages [Inclds: Pulleys, Belts, Hubs, Key] Tech Bulletin 003.
Dimensions 11.73 x 10.0 x 5.24" 298 x 254 x 133 mm Refer to pump Service Manual for repair procedure and additional technical information.
PARTS LIST
ITEM PART NUMBERS DESCRIPTION QTY
310, 340 310B, 340B
350 MATL 350B MATL
2 30057 STL 30057 STL Key (M6x6x25) 1
5 125824 STCP R 125824 STCP R Screw, HHC, Sems (M6x16) 8
8 43344 AL 43344 AL Cover, Bearing 2/1/2
10 43343 NBR 43343 NBR O-Ring, Bearing Cover - 70D 2
11 43222 NBR 43222 NBR Seal, Oil, Crankshaft 2/1/2
15 14480 STL 14480 STL Bearing, Ball 2
20 45883 HS 45883 HS Rod, Connecting Assy [09/05] 3
25 43342 FCM 43342 FCM Crankshaft, Dual End - M18, 310, 310B 1
44945 FCM 44945 FCM Crankshaft, Single End -M10, 340, 340B 1
43838 FCM 43838 FCM Crankshaft, Dual End - M12, 350, 350B 1
30 44949 AL 44949 AL Cover, Blind Shaft - 340, 340B 1
31 828710 — 828710 — Protector, Oil Cap w/Foam Gasket 1
32 43211 ABS 43211 ABS Cap, Oil Filler 1
33 14177 NBR 14177 NBR O-Ring, Filler Cap - 70D 1
37 92241 — 92241 — Gauge, Oil, Bubble w/Gasket 1
38 44428 NBR 44428 NBR Gasket, Flat, Oil Gauge - 80D 1
40 126541 STCP R 126541 STCP R Screw, HHC, Sems (M6x20) 4
48 25625 STCP 25625 STCP Plug, Drain (1/4"x19 BSP) 1
49 23170 NBR 23170 NBR O-Ring, Drain Plug - 70D 1
50 48772 AL 48772 AL Cover, Rear [10/01] (See Tech Bulletin 090) 1
51 48773 NBR 48773 NBR O-Ring, Rear Cover [10/01] (See Tech Bulletin 090) 1
53 48769 AL 48769 AL Crankcase [05/02] (See Tech Bulletin 090) 1
56 43355 POP 43355 POP Pan, Oil 1
64 43351 CM 43351 CM Pin, Crosshead 3
65 43365 ZZCP 43365 ZZCP Rod, Plunger 3
70 43228 NBR 43228 NBR Seal, Oil, Crankcase 3
75 43328 S 43328 S Slinger, Barrier 3
88 45697 S 45697 S Washer, Keyhole (M18 x 10) 3
90 43367 CC 43367 CC Plunger (M20x72) 3
96 43235 PTFE 43235 PTFE Back-up-Ring, Plunger Retainer 3
97 17399 NBR 17399 NBR O-Ring, Plunger Retainer - 80D 3
14160 FPM 14160 FPM O-Ring, Plunger Retainer - 80D 3
u 46204 EPDM u 46204 EPDM O-Ring, Plunger Retainer - 70D 3
98 45891 CU 45891 CU Gasket 3
99 104360 S 104360 S Retainer, Plunger w/Stud 3
100 45688 PVDF 45688 PVDF Retainer, Seal, 2-Pc [04/06] (See Tech Bulletin 105) 3
101 43302 — 43302 — Wick, Long Tab 3
106 43305 NBR 43305 NBR Seal, LPS w/S-Spg 3
45153 FPM 45153 FPM Seal, LPS w/SS-Spg 3
u 48429 EPDM u 48429 EPDM Seal, LPS w/SS-Spg 3
76305 ST2 76305 ST2 Seal, LPS w/S-Spg 3
120 45679 BB 45679 BB Case, Seal 3
121 14200 NBR 14200 NBR O-Ring, Seal Case - 70D 3
11719 FPM 11719 FPM O-Ring, Seal Case 3
u 48907 EPDM u 48907 EPDM O-Ring, Seal Case 3
125 43307 SNG 43307 SNG Seal, HPS w/S 3
44936 FPM 44936 FPM Seal, HPS w/SS 3
46667 HT 46667 HT Seal, HPS "Hi-Temp", 2-Pc w/S-Support 3
139 22179 BBCP 22179 BBCP Plug, Inlet [1/2" NPT(M)] 1
162 48361 D 48361 D Back-up-Ring, Seat 6
163 43358 NBR 43358 NBR O-Ring, Seat - 70D 6
44938 FPM 44938 FPM O-Ring, Seat - 70D 6
u 48908 EPDM u 48908 EPDM O-Ring, Seat 6
164 43725 S 43725 S Seat 6
166 43723 S 43723 S Valve 6
167 43750 S 43750 S Spring, Valve 6
168 44565 PVDF 44565 PVDF Retainer, Valve Spring 6
172 17615 NBR 17615 NBR O-Ring, Valve Plug - 75D 6
15855 FPM 15855 FPM O-Ring, Valve Plug -70D 6
u 48431 EPDM u 48431 EPDM O-Ring, Valve Plug -75D 6
174 43849 BBCP 43849 BBCP Plug, Valve 6
185 44837 BBCP 49721 SBCP Head, Manifold 1
188 126520 STCP R 126520 STCP R Screw, HSH, Sems (M10x35) 2
250 118672 STCP 118672 STCP Protector, Shaft (Belt Drive Only) 1
255 30243 STZP 30243 STZP Mount, Direct (Belt Drive Only) 1
260 30611 STZP 30611 STZP Mounting, Angle Rail (Belt Drive Only) 1
265 30659 — 30659 — Mount, Assy (Inclds: 30611, 30633, 118672) (Belt Drive Only) 1
270 30633 STL 30633 STL Assy, Pulley & Key (Inclds: 30058, 30057) (Belt Drive Only) 1
275 30944 STL 30944 STL Assy, Hub & Key (Inclds: 30057, 30945) (Belt Drive Only) 1
EXPLODED VIEW
DISCHARGE
Models
Standard 310, 340, 350
Special Brass 310B, 340B, 350B
May 2015
ITEM PART NUMBERS DESCRIPTION QTY
310, 340 310B, 340B
350 MATL 350B MATL
283 34334 — 34334 — Kit, Oil Drain (3/8" x 24") (See Individual Data Sheet) 1
76334 — 76334 — Kit, Oil Indicator, (3/8" x 24) (See Individual Data Sheet) 1
299 810027 BBCP 818471 SBCP Head, Complete Standard 1
300 30623 NBR 30623 NBR Kit, Seal (Inclds: 97, 101, 106, 121, 125) Standard 1
34155 FPM 34155 FPM Kit, Seal (Inclds: 97, 101, 106, 121, 125) .0110 1
33623 HT 33623 HT Kit, Seal, "Hi-Temp" (Inclds: 97, 101, 106, 121, 125) .3000 1
u 31163 EPDM* u 31163 EPDM* Kit, Seal (Inclds: 97, 101, 106, 121, 125) .0220 1
310 30821 NBR 30821 NBR Kit, Valve, Preassembled (Inclds: 162-164, 166-168, 172) Standard, .3000 2
31821 FPM 31821 FPM Kit, Valve, Preassembled (Inclds: 162-164, 166-168, 172) .0110 2
u 31162 EPDM u 31162 EPDM Kit, Valve, Preassembled (Inclds: 162-164, 166-168, 172) .0220 2
350 30696 STZP 30696 STZP Plier, Reverse 1
351 33004 STZP 33004 STZP Socket, Seal Case (1/2" Drive) 1
— 6107 — 6107 — Oil, Bottle (21 oz.) ISO-68 Hydraulic (Fill to specified crankcase capacity prior to start-up) 1
Bold print part numbers are unique to a particular pump model. Italics are optional items. u Silicone oil/grease required.
R Components comply with RoHS Directive. [ ] Date of latest production change. *Review individual parts in each kit for material code identification.
View Tech Bulletins 002, 003, 008, 024, 027, 032, 035, 036, 043, 045, 046, 049, 052, 053, 054, 073, 074, 077, 079, 083, 090, 105 for additional information.
MATERIAL CODES (Not Part of Part Number): ABS=ABS Plastic AL=Aluminum BB=Brass BBCP=Brass/Chrome Plated CC=Ceramic CM=Chrome-moly CU=Copper D=Acetal
EPDM=Ethylene Propylene Diene Monomer FCM=Forged Chrome-moly FPM=Fluorocarbon HS=High Strength HT=High Temp (EPDM Alternative) NBR=Medium Nitrile (Buna-N)
POP=Polypropylene PTFE=Pure Polytetrafluoroethylene PVDF=Polyvinylidene Fluoride S=304SS SBCP=Special Brass/Chrome Plated SNG=Special Blend (Buna) ST2=Special PTFE 2
STL=Steel STCP=Steel/Chrome Plated STZP=Steel/Zinc Plated ZZCP=Chrome Plated/Steel - Zamak
10.00 (254) 11.86 (301)
(2) 3/8" NPT(F) 7.80 (198)
DISCHARGE 6.69 (169) 2.94 (75)
1.10
5.25 (27)
(133)
6.73
(170)
0.787
4.28 (20)
1.46 1.10
(108) (27)
(37)
(2) 1/2" NPT(F)
INLET
4.92 (125)
3.15 (80) 9.45 (240)
Models 310, 340, 350, 310B, 340B, 350B
3 5
1 2
1. Special concentric, high-density, polished, 3. 100% wet seal design adds to service life by 5. Specially formulated, Cat Pumps exclusive,
solid ceramic plungers provide a true wear allowing pumped liquids to cool and lubricate Hi-Pressure Seals offer unmatched
surface and extended seal life. on both sides. performance and seal life.
2. Manifolds are a high tensile strength 4. Stainless steel valves, seats and springs
forged brass or special brass for long life, provide corrosion-resistance, ultimate seating
continuous duty and compatibility. and extended life.
• CAUTIONS AND WARNINGS
All High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve,
relief valve). Failure to install such relief devices could result in personal injury or damage to pump or property. Cat Pumps does not assume any liability or
responsibility for the operation of a customer’s high pressure system.
Read all CAUTIONS and WARNINGS before commencing service or operation of any high pressure system. The CAUTIONS and WARNINGS are included
in each service manual and with each Accessory Data sheet. CAUTIONS and WARNINGS can also be viewed online at www.catpumps.com/cautions-
warnings or can be requested directly from Cat Pumps.
WARRANTY
View the Limited Warranty on-line at www.catpumps.com/warranty.
CAT PUMPS
1681 - 94TH LANE N.E. MINNEAPOLIS, MN 55449-4324
PHONE (763) 780-5440 — FAX (763) 780-2958
e-mail: [email protected]
www.catpumps.com
For International Inquiries go to www.catpumps.com and navigate to the “Contact Us” link. PN 993111 Rev N 5/15
