Construction Repair &
Strengthening Products Great Products
Kemapoxy 165
Non-Shrink Epoxy adhesive Mortar and Grouting Compound
and for fixing steel bars into concrete under water.
Description:
• KEMAPOXY 165 adhesive mortar is pre-filled medium viscosity and solvent free, two components
product on the basis of modified epoxy resin with an appropriate hardening system.
• Complies with ASTM C 881, BS EN 12004, ES 4118.
Fields of Use:
• KEMAPOXY 165 is an adhesive mortar for steel to concrete and concrete to
concrete.
• Anchorage of bolts and steel bars with concrete under water .
• Grouting under machine plates and steel structures.
• To fill cracks and cavities in concrete elements.
• To fill the joints between anti-acid tiles.
Advantages:
• Shrinkage free.
• High mechanical strengths.
• Good chemical resistance.
• Good adhering to concrete and steel.
• Anti-fungus and anti-bacteria.
Technical Data :( at 25° C)
Colour Grey
Soild content 100 %
Density 1.95 ± 0.02 kg/l
Mixing ratio A:B ( by weight) 12 : 1
Pot life 2 hours
Initial setting time 8 hours
Final setting time after 24 hours (for light loads)
Full hardness after 7 days (for full loads)
Min. application temp 15°C
Compressive strength (ASTM D 695) >800 kg/cm2
Flexural strength ( ASTM D 790 ) >400kg/cm2
Punching sheet strength(ASTH D732): > 250 kg/cm2
Adhesive strength on concrete ( ASTM C 882 ) 103 kg/cm2
Rate of use (Theoretical) 2 kg/m2/ mm
Chemical Resistance : ( Immersion time 7 days )
Sulphuric acid 50% ex Sodium hydroxide 50% ex
Potassium hydroxide 50% ex
Hydrochloric acid 20% ex Ammonium nitrate ex
25% g Fuels Petrol ex
Benzin g
Phosphoric acid 50% g
ex: excellent ( no softening + no bubbles
Nitric acid 10% ex no change in colour)
20% g
g: good ( no softening + no bubbles
Acetic acid 5% ex slight change in colour and
20% g weight )
Chemicals for Modern Building International
Head Office: 69 Zone G, Khofo Gate Hdaek El-Ahram- Giza-Egypt
Tel./Fax:+(202)39744170 - 39744148 - (+202)016 55 08 321
Sales Office: 319 El- Haram St., Giza.Tel:+(202) 35853917 - 35854084
Fax: +(202) 35859858 - 35854118
Construction Repair &
Strengthening Products
Directions for Use:
• Areas must be clean and free of dust, dirt and other impurities, and if necessary they should be flamed or
sandblasted.
• After thoroughly mixing both components of KEMAPOXY 165 adhesive, mortars is processed by casting in
holes and other areas to be glued .(See details of anchoring the rebar below)
• For filling joints of anti acid tiles, material should be put immediately after mixing in joint gun and fill the joint
with width not less than 5 mm and allover the depth of the tiles then smooth surface.
• Clean tools by Kemsolve1.
* N.B: In case of working under water surface we can submerge the container contains the mixture A+B under
surface of water and the work is done by trained diver .
Steps for anchoring the rebar
• Determining the places to install rebar according to the design drawings.
• Drill holes with a diameter of 2-4 mm more than the diameter of the rebar and a depth of 7-10 times the diameter
of the rebar.
• Cleaning the hole with compressed air, then applying a primer coat of Kemapoxy 150.
• Fill about 70% of the depth with Kemapoxy 165.
• Put the rebar required to be fixed while maintaining its integrity in the specified position and level the epoxy mortar and
leave it to the final hardness.
Note: It is possible to anchoring the rebar by making Kimpoxy 150 mortar by adding fillers to it in the appropriate proportion to
reach the desired consistency as an alternative solution to ready-made epoxy mortar "Kemapoxy 165"
Safety Precautions:
• Application should be carried out in well ventilated place.
• Gloves, protective clothing and eye goggles should be worn during application.
• Skin contaminations should be immediately cleaned with soap and plenty of water. Don't use solvent.
• If the material is splashed into the eyes, they should be immediately washed with water and then report to
an eye specialist.
• Do not eat or smoke during application.
Storage:
• 2 years under suitable storage conditions in closed containers.
Packages:
• 1kg or 6 kg. kit (A + B).
• Follow the mixing ratios - by weight - indicated on the package.
Chemicals for Modern Building International
Head Office: 69 Zone G, Khofo Gate Hdaek El-Ahram- Giza-Egypt
Tel./Fax:+(202)39744170 - 39744148 - (+202)016 55 08 321
Great Products Sales Office: 319 El- Haram St., Giza.Tel:+(202) 35853917 - 35854084
Fax: +(202) 35859858 – 35854118
