Command Cygwin
Command Cygwin
#################################
#
#
# Welcome to MoShell 19.0c (LPA108514/1_R19C)
#
#
#
###################################################################################
#################################
===================================================================================
=================================
CV Command
===================================================================================
=================================
cvls List CV
cvcu Lihat CV Aktif
cvset / cvre Set CV
cvms Backup CV
cvget Ambil CV
Cvrm Hapus CV
===================================================================================
=================================
RRU Cek Command
===================================================================================
=================================
lh ru fm getfaults Menacri port RU Fault
get ru indic Lihat indikasi RU
st ru status ru
st cell status cell
get radio no cek traffic
ue print -admitted cek traffic
lh mp ue print -admitted cek traffic
===================================================================================
=================================
inventory Command
===================================================================================
=================================
invr
Options:
The options are used to reduce the number of tables displayed. Without options, all
tables are displayed.
- h : HW information only.
- x : HW, CPRI, and RF information (TX/RX/VSWR and RU to Cell mapping)
- xf : same as "x" but without CPRI.
- xu : same as "x" but without RF (only UEs)
- xt : same as "x" but without RF nor temperature.
- xa : same as "x" but with RU mapping to Antenna/TMA/RET instead of Cell
- xaf : same as "x" but with RU mapping to both Cell and Antenna/TMA/RET
- xtaf: same as "xaf" but without TX/RX/VSWR/temperature (quicker)
- l : licensing information only (feature and capacity licenses)
- p : show CPU load of the PlugInUnits: obsolete, replaced by command "lh all
procload".
- r : re-read the inventory data from the node.
- c : print the tables in CSV format
- b : show receiver BER values in the CPRI tables
- g : display graphical view of CPRI and RF connection (RBS/ERBS/MSRBS)
===================================================================================
=================================
===================================================================================
=================================
pmx . biterror Counter port Bit Error
cpridump Cek CPRI Broken
lh ru fui get vswr Cek VSWR
sdic/r diagnosis Alarm plus rilink
set rfport vswrsupervisionactive false blok ret
hget rru prod|oper
hget rru prod|fault
pmxet . Int_RadioRecInterferencePwr$ cek RRU power