data sheet

PRODUCT DEFINITION SPECIFICATIONS

Tridium’s Niagara Edge 10 is an IP-based field equipment controller powered Niagara 4 – Requires Niagara 4.7 or later
by the Niagara Framework®. Niagara Edge 10 controllers drive applications
such as zone temperature control, and the operation of fan coil units, single- HARDWARE
stage air handling units, water-source heat pumps and more. Niagara Edge 10
NXP iMX6 SoloX2: 800 MHz ARM
controllers run the full Niagara stack, with 10 points of on-board IO and
Cortex-A9/M4
IO-R-34 expansion capability. Niagara Edge 10 licensing supports three
devices and 50 total points to harness the full power of Niagara at the edge. 512 MB DDR SDRAM

2GB total eMMC flash storage

with user space set at 1GB

Powered from 24VAC/DC source

5 Universal inputs: Type 3

(10K) thermistors, 0-100K ohm,
0-10VDC, 0-20mA with external
resistor, Dry Contact

2 Analog outputs: 0-10VDC, 4mA

max output current

3 Digital outputs: Triac, 24VAC

@.5 amp

2 10/100MB Ethernet ports

capable of daisy chaining

NETWORK 1 RS-485 serial port

• Niagara Edge 10 controllers can be daisy chained to continue network
connectivity and eliminate the need for separate wiring back to a switch Real-time clock

• Connect Niagara Edge 10 controllers to your main building or IT network Secure boot
and manage them directly with a Supervisor alongside of a JACE®

• Use the secondary Ethernet port of the JACE 8000 to create a private
network of Niagara Edge 10 controllers

powered by

framework®
MOUNTING
EXPANDABILITY
Support mounting on EN50022 standard 7.5mm x 35mm DIN rail
One (1) IO-R-34 connected over a
or panel mounting
shielded 485 bus

CONNECTIVITY
When data from external sources
— i.e. thermostats, variable speed
drives, or smart sensors — is
required to drive an application,
the Niagara Edge 10 allows for
connections to those types of
external sources using BACNet/
IP, Modbus, and SNMP over an
IP network and/or BACnet and
Modbus over a 485 network.

ENVIRONMENTAL
SPECIFICATIONS
AGENCY CERTIFICATIONS • Operating temperature:
• FCC Part 15, class b • RoHS2 -20 to 60°C

• C-UL • REACH • Storage temperature: -40 to 85°C

• CE • WEEE • Humidity: 5-95% non-condensing

• UL916, Open Energy • CAN/CSA-C22.2 No. 205-12 • Shipping & vibration: ASTM
Management Class 2 D4169, Assurance Level II
• MTBF: 10 years

ORDERING INFORMATION
Part number Description

Niagara Edge 10 field controller with 10 points of onboard IO, 1 RS-485 serial port, and 2 10/100
Ethernet ports. Supports 1 IO-R-34. Includes Niagara N4 and drivers for BACnet, Modbus and SNMP.
EDGE-10
Supports up to 3 devices or 50 points. Includes all software updates released for commercial use by
Tridium for the life of N4, but not for any later versions.

The Niagara Edge 10 controller is available through a wide variety of original equipment manufacturers.
Our open distribution business model and open protocol support allow a vendor-neutral application
compatible with devices and systems throughout the world.

tridium.com

Locations and customer support, worldwide

Headquarters Support
North America North America & Latin America Europe, Middle East & Africa Asia Pacific
1 804 747 4771 1 877 305 1745 44 1403 740290 8610 5669 7148

© 2018 Tridium Inc. All rights reserved. All other trademarks and registered trademarks are properties of their respective owners.

Information and/or specifications published here are current as of the date of publication of this document. Tridium, Inc. reserves the right to change or modify specifications without
prior notice. The latest product specifications can be found by contacting our corporate headquarters, Richmond, Virginia. Products or features contained herein may be covered by
one or more U.S. or foreign patents. This document may be copied only as expressly authorized by Tridium in writing. It may not otherwise, in whole or in part, be copied, photocopied,
reproduced, translated, or reduced to any electronic medium or machine-readable form.

2018-0005