MAGIC NS 2 DualSense, DualShock 4, DualShock 3, Xbox Series X/S, Xbox One Bluetooth controllers, Xbox * LED Indicator becomes

DualShock 3, Xbox Series X/S, Xbox One Bluetooth controllers, Xbox * LED Indicator becomes solid: The connection is successful. System Settings
included in the packaging, you can purchase it separately). As soon as the controller is identified by the system,
Elite Wireless Controller Series 2, Switch Pro, Switch Joy-Con, Wii Remote, Wii U Pro. * Switch Pro mode (LED is purple): Go to System Setting > you can remove the USB cable and start to SYNC it again.
Connect your Bluetooth or wired USB controllers to your Switch, PC Windows, PS3, NEOGEO mini, Controller and Sensors > Turn on Pro Controller Wired
Wired USB Controllers * Special Remarks for Xbox Elite Wireless Controller Series 2
NEOGEO Arcade Stick Pro, PS Classic, SEGA MEGA DRIVE mini, SEGA Genesis Mini entertainment Communication.
Pro Controller Wired Communication ON

It may take a longer time to connect your Xbox Elite 2 and Magic-NS 2 adapter. The connection may be
system.
Controllers and Sensors

DualSense, DualShock 4, DualShock 3,Xbox Bluetooth Controller, Switch Pro, ASTRO Gaming C40 * Bluetooth headset only works for Switch mode (LED is red). disconnected shortly (The LED on the controller and the adapter blink) and then connected again during the
If you find any issues or have any difficulty operating the device,please reach out to us at TR Controller PlayStation 4, PlayStation 4 SCUF Vantage 2 Controller, SEGA MEGA DRIVE and Bluetooth pairing process. Please wait patiently until the LED indicators on the controller and the adapter stop
[email protected] and we will be more than happy to help you out. Update to the latest SEGA Genesis Mini USB Controller Pads, Logitech rumble gamepad F510 and F310, PS Classic
04 Button on the side of the adapter blinking.
firmware at www.mayflash.com Controller, Switch Taiko Drum, PS4 Taiko Drum. If the Bluetooth connection failed, you can repeat the above Bluetooth Controllers Set Up to try again. Before
Press the button shortly to SYNC the To switch the modes, press and hold the

MAGIC NS 2
The wireless controller that comes from your console will become a wired controller by simply a new connection, please make sure you pull out the adapter from the console system, and connect them
lncludes connecting a standard USB cable (with exception of Xbox 360 which requires an official Microsoft controllers and the adapter. The indicator button on the side of the adapter for 3-5 again, and restart your controller.
wired Xbox 360 controller). For best results, it is recommended that you use original Switch blinks quickly. seconds.
USB Wireless Adapter Controllers, or genuine Xbox or PlayStation controllers and quality certified USB cables. 06 Wired Controllers Set UP

Switch PS3 PC Connect the adapter into any spare USB port on your game
MAGIC-NS 2 USB Type C Cable Manual
Quick Start Guide console.
Connect the wired controller to the adapter. The wireless
01 USB A-Male 05 Bluetooth Controllers Set Up
System Compatibility Switch Button
controller that comes from your console will become a wired
Connect the adapter to your game console. LED Indicator
Connect the adapter into any spare USB port on your controller by simply connecting a standard USB cable (with
game console. exception of Xbox 360 which requires an official Microsoft
02 USB A-Female wired Xbox 360 controller).
USB A-Male To switch the modes, press and hold the button on the
Connect the wired game controllers to the side of the adapter for 3-5 seconds.The LED indicator Your controller is now ready to use.
USB A-Female
Switch PlayStation 3 Windows NEOGEO mini NEOGEO Arcade adapter. blinks slowly.
Stick Pro Modify the Vibration Intensity
03 LED Indicators Turn on the Bluetooth controller, press the Button on the
System Compatibility side of the adapter, and then press the SYNC button on Press and hold the Button R1/RB and R3 for 3-5 seconds until the controller keeps rumbling.
Switch,PS3,Windows, System mode PlayStation 3 PC NEOGEO Arcade SEGA MEGA DRIVE Mini your Bluetooth controller. The LED indicator blinks (Please keep holding these two buttons until you finish the below whole process).
Switch Switch Pro NEOGEO mini PS Classic
NEOGEO mini,PS Classic, PS Classic Mini SEGA Genesis Mini SEGA Mega Drive Mini PC (Dinput) (Xinput) Stick Pro SEGA Genesis Mini
NEOGEO Arcade Stick Pro
quickly. To modify the vibration intensity, press the D-Pad “Up” or “Down”.
LED Indicator Red Purple Blue Green Yellow Yellow Cyan White
SEGA MEGA DRIVE mini, Controller Compatibility LED indicator becomes solid when connection is successful.
SEGA Genesis Mini
mayflash.com To quit the modification, release any button of R1/RB or R3 once you’ve got your preferred
* LED Indicator blinks slowly: The Bluetooth is not connected yet. Note: vibration intensity.
Bluetooth Controllers * LED Indicator blinks quickly: The Bluetooth is Pairing.
* If the Bluetooth syncing failed, please connect the Bluetooth controller to the adapter using a USB cable (not
There are 7 levels of the vibration intensity. Note:
To switch A-B,B-A,X-Y,Y-X, press and hold
* Switch mode (LED is Red) does not support 6-axis
The default one is 100%. the button “START” and “A” for 3 PS5 DualSense L1 R1 Create OPTIONS L3 R3 LS RS POV L2 R2 PS Pressing Tpad
motion and vibration.
Switch Pro mode vibration levels: seconds.To switch A-A, B-B, X-X, Y-Y, press
If you need the 6-axis motion and vibration, DualShock 4 L1 R1 SHARE OPTIONS L3 R3 LS RS POV L2 R2 PS Pressing Tpad
0% 25% 37.5% 50% 62.5% 75% 100% * and hold the button “START” and “B” for 3
please go to Switch Pro mode (LED is Purple).
PS3, PC Xinput vibration levels: seconds. (This function is optional. It DualShock 3 L1 R1 SELECT START L3 R3 LS RS POV L2 R2 PS SELECT + START

50% 62.5% 75% 87.5% 100% 125% 150% depends on the different controllers.) Switch Pro L R L3 R3 LS RS POV ZL ZR HOME + or
D-Pad “Down” 50% 62.5% 75% 87.5% 100% 125% 150% D-Pad “Up” Update the Software
The Touch Pad button on the PS4 Joy-Con L3 R3 LS RS POV ZL ZR HOME + or
Adjust the Dead Zone If you are having problems with the adapter, you can follow the below instructions to update.
Controller works as the Capture button of
L R

Download the software from http://www.mayflash.com/Support Xbox Series X/S LB RB VIEW MENU L3 R3 LS RS POV LT RT HOME VIEW + MENU
Press and hold the Button START and D-Pad Left or D-Pad Right. Once the LED on the adapter the Joy-Con or Switch Pro controller when
and install it on your Windows system.
starts to blink, you may release the Button D-Pad Left or D-Pad Right, BUT keep holding the you connect your PS4 controller to the Xbox One LB RB VIEW MENU L3 R3 LS RS POV LT RT HOME VIEW + MENU

Button START. Double click on the updater and leave the updater window Switch system by the adapter. Please see Xbox 360 BACK START L3 R3 LS RS POV HOME BACK + START
LB RB LT RT
To increase or decrease the dead zone, press the D-Pad “Up” or “Down”. open on your screen. more details about the other controllers on
PC-Xinput X/Y Axis X/Y Circle POV Z- Z+ HOME
Press and hold the button on the side of the below “Controllers Buttons Table”.
As soon as you get the right dead zone value, you may release the Button START to quit the
process. the adapter, and connect the USB from To disconnect the controller and the PC-Dinput X/Y Axis Z Axis Circle POV

your adapter into any spare port on your adapter, press the button on the side of Wii U Pro L R L3 R3 LS RS POV ZL ZR HOME +
There are 7 levels of the Dead Zone Value. The
PC. Wait for 3-5 seconds. the adapter. But if you want to disconnect
default one is Level 3. Wii Classic Pro L R LS RS POV ZL ZR HOME +
As soon as the adapter has been the Xbox Elite 2 and the adapter, you need
Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Level 7
recognized, you may release the button. to press and hold the HOME button on Wii mote + Nunchuck LS POV Z+ HOME +
0% 2.5% 5% 7.5% 10% 12.5% 15%
your controller to shut off the power. GENESIS mini Controller POV POV
Select “Update”. START
You can know the Dead Zone Level by the times of the LED
blinking during the adjusting process. For example, LED on MEGA DRIVE mini Controller MODE START POV POV
D-Pad “Down” 0% 2.5% 5% 7.5% 10% 12.5% 15% D-Pad “Up” Do not disconnect the device until you are
the adapter blinks 3 times then stops when Dead Zone
Level is Level 3. informed that the update is completed PS4 Taiko Drum L1 R1 SHARE OPTIONS
Beat the Beat the
POV
Beat the Beat the
PS
Drum Left Drum Right Drum Left Drum Right
successfully. Beat the Beat the Beat the Beat the
Switch Taiko Drum L R POV HOME Capture
Using Bluetooth Headset (Only for Switch mode / LED Red) Drum Left Drum Right Drum Left Drum Right

Additional Functions PS Classic L1 R1 SELECT START POV L2 R2

Power on your Bluetooth headset to enter into the pairing mode.
NEOGEO mini SELECT START Joystick Joystick
Press the pair button on the side of the adapter, LED starts to blink rapidly, wait for a few Only one Bluetooth controller is supported for one adapter.
seconds. A wired USB controller and a wireless Bluetooth controller can be connected at the same time, NEOGEO Arcade Stick PRO
White Button Gray Button
SELECT START Stick White Button Gray Button
Options

LED becomes solid when the connection is successful. but both of them have the same functions and can only play one game character.