Scribd
Upload
77 views2 pages

8051 Microcontroller Architecture

The 8051 microcontroller architecture contains a central processing unit (CPU) that manages the microcontroller's functions. It has interrupts that allow other high priority processes to run temporarily. The architecture also includes memory (4KB ROM and 128B RAM) to store programs and data, address and data buses for transferring information, and an oscillator to provide timing for counters and timers.

Uploaded by

Valay Patel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views2 pages

8051 Microcontroller Architecture

The 8051 microcontroller architecture contains a central processing unit (CPU) that manages the microcontroller's functions. It has interrupts that allow other high priority processes to run temporarily. The architecture also includes memory (4KB ROM and 128B RAM) to store programs and data, address and data buses for transferring information, and an oscillator to provide timing for counters and timers.

Uploaded by

Valay Patel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

8051 Microcontroller Architecture

Let's see the internal architecture of 8051 Microcontroller represented in form of block diagram as shown below:

Basic components present internally inside 8051 Microcontroller architecture are:

CPU (Central Processing Unit): CPU act as a mind of any processing machine. It synchronizes and manages all
processes that are carried out in microcontroller. User has no power to control the functioning of CPU. It interprets
the program stored in ROM and carries out from storage and then performs it projected duty. CPU manage the
different types of registers available in 8051 microcontroller.

Interrupts: Interrupts is a sub-routine call that given by the microcontroller when some other program with high
priority is request for acquiring the system buses the n interrupts occur in current running program.

Interrupts provide a method to postpone or delay the current process, performs a sub-routine task and then restart
the standard program again.

Types of interrupt in 8051 Microcontroller:

Let's see the five sources of interrupts in 8051 Microcontroller:

Timer 0 overflow interrupt - TF0

Timer 1 overflow interrupt - TF1

External hardware interrupt - INT0


External hardware interrupt - INT1

Serial communication interrupt - RI/TI

Memory: For operation Micro-controller required a program. This program guides the microcontroller to perform
the specific tasks. This program installed in microcontroller required some on chip memory for the storage of the
program.

Microcontroller also required memory for storage of data and operands for the short duration. In microcontroller
8051 there is code or program memory of 4 KB that is it has 4 KB ROM and it also comprise of data memory (RAM)
of 128 bytes.

Bus : Bus is a group of wires which uses as a communication canal or acts as means of data transfer. The different
bus configuration includes 8, 16 or more cables. Therefore, a bus can bear 8 bits, 16 bits all together.

Types of buses in 8051 Microcontroller:

Let's see the two types of bus used in 8051 microcontroller:

Address Bus: 8051 microcontrollers is consisting of 16 bit address bus. It is generally be used for transferring
the data from Central Processing Unit to Memory.

Data bus: 8051 microcontroller is consisting of 8 bits data bus. It is generally be used for transferring the data
from one peripherals position to other peripherals.

Oscillator: As the microcontroller is digital circuit therefore it needs timer for their operation. To perform timer
operation inside microcontroller it required externally connected or on-chip oscillator. Microcontroller is used inside
an embedded system for managing the function of devices. Therefore, 8051 uses the two 16 bit counters and timers.
For the operation of this timers and counters the oscillator is used inside microcontroller.

← Prev Next →

You might also like