®
V-Jet Corrosion Inhibitor Pigs
Sizes: 4- to 28-inch Bulletin No: 3000.008.02
Version: 01.2022
Supersedes: 3000.008.01 (11.2021)
Featuring sealing cups molded of tough
Formula SI™ urethane, the V-Jet Pig is designed
to be sturdy and reliable during long runs.
The V-Jet Pig works well for the final stages of a
cleaning program as a means of removing scale
from the pipe’s top inner wall.
Options
® The V-Jet Pig is available in multiple sizes and
V-Jet Corrosion Inhibitor Pig nozzle configurations. For sizes 4- to 8-inch, the
10- to 28-inch
V-Jet VXP Pigs have a single central nozzle.
Larger diameter V-Jet Pigs are available in a
variety of nozzle arrangements, from 10-inch
pigs with two nozzles all the way up to 28-inch
pigs with nine nozzles. Custom designs are also
possible for larger pigs.
®
The V-Jet Pig can be used as a stand-alone
V-Jet VXP Corrosion Inhibitor Pig dewatering pig, or in tandem with a slug of
4- to 8-inch corrosion inhibitor behind. It can also be used
Description in batching mode with a slug of inhibitor
separating a batching pig up front and the
V-Jet Pig behind. This inhibitor slug serves as a
Injection or batching of corrosion inhibitor fluid The reclaimed corrosion inhibitor is then
reservoir to supply the V-Jet Pig’s spray nozzles
can help reduce pipeline deterioration, but gravity redeployed by the nozzles as an atomized spray at
and facilitates creation of a dense inhibitor fog
naturally forces inhibitor to settle along the bottom about a 45-degree angle (10-inch and larger) onto
between the pigs as they move through the
of a pipe, leaving the top of the pipe unsaturated the top half of the pipe’s inner wall. The atomized
pipe.
and most vulnerable to corrosion. The TDW spray also creates an increasingly dense vapor
®
V-Jet Corrosion Inhibitor Pig is designed to defy cloud that is pushed ahead of the V-Jet Pig during The V-Jet Pig has also been successful in
gravity by spraying corrosion inhibitor onto the the entirety of the run, helping to coat all areas of chemical cleaning applications.
inside top portion of multi-phase gas gathering or the pipe wall with inhibitor.
gas transmission pipelines.
The V-Jet Pig works based on the dynamics
Features
of bypass flow and differential pressure, with
no moving parts or pressure vessels to fill and
charge. Instead, the V-Jet Pig’s design allows the A counterweight in the V-Jet Pig helps it
higher pressure to flow through its body and spray maintain proper nozzle orientation during
head. Bypass flow acts as the accelerant to each run (10-inch and larger).
transfer and vaporize fluid while creating a low For liquids with physical properties similar to
pressure area in the spray nozzle as it passes water, each nozzle typically delivers
through. This pressure drop creates a vacuum at approximately three quarts per minute at 15 psi.
the V-Jet Pig’s front inlet ports, and this vacuum Inhibitor delivery rates will vary depending on
draws up residual corrosion inhibitor that has differential pressure, fluid viscosity and specific
settled on the bottom of the pipe. gravity.
North & South America: +1 918 447 5400 Europe / Africa / Middle East: +32 67 28 3611 Asia Pacific: +65 6364 8520 www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T.D. Williamson in the United States and other countries. / TM Trademark of T.D. Williamson in the United States and other countries. / ©2022 T.D. Williamson
Dimensions and Part Numbers
V-Jet Corrosion Inhibitor Pig 3000.008.01- p2
A
B
C
®
V-Jet Corrosion Inhibitor
or Pig - Sizes 10- to 28-inch
Size Part A B C D Approximate
(Inches) Number Inches Inches Inches Inches Weight (Lbs.)
10 01-1961-0010-00S 25.68 21.28 18.16 10.62 60
12 01-1961-0012-00S 26.00 21.55 18.36 12.62 75
14 01-1961-0114-00 27.50 22.10 18.35 13.25 105
16 01-1961-0116-00 34.06 28.18 24.68 15.88 130
18 01-1961-0018-00 38.00 32.00 28.00 17.88 182
20 01-1961-0020-00 39.00 32.00 28.25 19.88 210
22 01-1961-0022-00 45.20 38.50 33.88 22.00 273
24 01-1961-0024-00 46.50 38.75 34.12 24.00 315
26 01-1961-0026-00 53.81 45.63 40.50 26.00 497
28 01-1961-0028-00 55.44 45.88 40.75 28.00 566
V-Jet® VXP Corrosion Inhibitor Pig Part Number System:
01-2119-XX24-0400
Durometer Size
Type / Configuration (2 Cup x 4 Disc)
®
V-Jet VXP Corrosion Inhibitor Pig - Sizes 4- to 8-inch
Size Part A B D Approximate
(Inches) Number Inches Inches Inches Weight (Lbs.)
4 01-2119-XX24-0400 8.76 6.98 4.38 2.3
6 01-2119-XX24-0600 14.15 11.75 6.50 6
8 01-2119-XX24-0800 17.50 14.07 8.50 12
North & South America: +1 918 447 5400 Europe / Africa / Middle East: +32 67 28 3611 Asia Pacific: +65 6364 8520 www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T.D. Williamson in the United States and other countries. / TM Trademark of T.D. Williamson in the United States and other countries. / ©2022 T.D. Williamson
