Wein Bridge Oscillator
Wein Bridge Oscillator
CIRCUIT DIAGRAM:
1
f=
2 πRC
PROCEDURE:
1. Identify the pin details of BC107 Transistor (or equivalent silicon Transistor such as
BC108/547) and test it using a millimeter. Set up the circuit on breadboard as shown in
figure.
2. A 12V Supply Voltage is given by using Regulated power supply and output is taken from
collector of the Transistor.
3. By using CRO the output time period and voltage are noted.
4. Plot all the readings curves on a single graph sheet.
MODEL GRAPH:
Department of Electronics and Telecommunication Engineering Page 2
Dr. Babasaheb Ambedkar Technological University Lonere, Raigad, Maharashtra
2017
CALCULATIONS:
1
f=
2 πRC
TABULAR FORM:
Sr.No FREQ.(Theoretically) FREQ.(practically)
CONCLUSION:
QUESTION: