HB Aircraft Industries AG HB-23/2400
HB Aircraft Industries AG HB-23/2400
SP-0097 23034
© Copyright 2019 - 2021
Garmin Ltd. or its subsidiaries
All Rights Reserved
Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated,
downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin.
Garmin hereby grants permission to download a single copy of this manual and of any revision to this manual onto
a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision
hereto, provided that such electronic or printed copy of this manual or revision must contain the complete text of
this copyright notice and provided further that any unauthorized commercial distribution of this manual or any
revision hereto is strictly prohibited.
REV DATE OF
PAGE NO(S) DESCRIPTION FAA APPROVED
NO. APPROVAL
Robert Murray
1 ALL Original Issue 7/22/2016 ODA STC Unit
Administrator
Robert Murray
Added information regarding G5
2 ALL 4/28/2017 ODA STC Unit
DG/HSI.
Administrator
Robert Murray
3 ALL Added interface to 3rd party autopilots. 10/18/2017 ODA STC Unit
Administrator
Paul Mast
4 ALL Added note to General section. 10/26/2017 ODA STC Unit
Administrator
Reformatted document. Updated Robert Murray
5 ALL system messages interface. Added 12/20/2017 ODA STC Unit
DG/HSI reversion description. Administrator
David G.
Added interface description to GAD 13.
Armstrong
6 ALL Added information regarding multiple 7/19/2019
ODA STC Unit
NAV source inputs.
Administrator
Added information regarding FAA
Paul Mast
approved content.
7 ALL 9/28/2021 ODA STC Unit
Updated SW ver. and references to
Administrator
GAD 29B to GAD 29B/GAD29D
When installed in place of the attitude indicator, the primary function of the G5 is to provide attitude information to
the pilot. When installed in place of the rate of turn indicator, the primary function of the G5 is to provide turn
rate and slip ball information to the pilot. When installed in place of the directional gyro, the primary function of
the G5 is to provide directional information to the pilot.
NOTE:
The pilot is reminded to perform appropriate flight and navigation instrument cross checks for the
type of operation being conducted.
In case of a loss of aircraft electrical power, a backup battery (optional when installed as a DG/HSI) sustains the
G5 Electronic Flight Instrument for up to four hours.
An optional GAD 29B/GAD 29D may be installed to provide course and heading datum to an autopilot based on
the data selected for display on the HSI.
An optional GAD 13 and OAT probe may be installed to provide measured outside air temperature (OAT) to the
G5 for display of true airspeed (TAS), outside air temperature, winds, and density altitude.
This STC allows the removal of the aircraft’s vacuum system if it is not required to support any other airframe
system.
Kinds of Operations
No Change except for the following:
• When a portable navigation source is selected on the G5, it shall not be used for the primary means
of navigation for IFR operations.
Attitude Failure
Attitude failure is indicated by removal of the sky/ground presentation, a red X, and a yellow “ATTITUDE FAIL” on
the display.
Rate-of-turn and slip information will not be available.
1. Use standby instruments.
2. Seek VFR conditions or land as soon as practical.
Attitude Aligning
During system initialization, the G5 displays the message ‘ALIGNING’ over the attitude indicator. The G5 will
typically display valid attitude within the first minute of power-up. The G5 can also align itself while taxiing and
during level flight.
If the “ALIGNING” indication occurs during flight and attitude remains displayed, the attitude display is acceptable
for use for flight in instrument conditions. The message will clear when the attitude solution is within the systems
internal accuracy tolerances. It is recommended to maintain wings level to reduce the time for the system to
align.
1. Deselect GPSS from the G5 menu and select a different autopilot mode.
2. Lateral GPS course guidance may only be used in VFR conditions.
1. Use an alternate source of outside air temperature to calculate true airspeed, density altitude, and winds.
1. If “NO BATT” is displayed on the G5 attitude indicator, do not fly in instrument meteorological conditions.
WARNING
If NO BATT is displayed on the G5 attitude indicator, the unit will not function in the event
of a loss of aircraft electrical power to the G5 attitude indicator. Do not fly in instrument
meteorological conditions if NO BATT is displayed on the G5 attitude indicator.
From the Menu, turn the Knob to move the cursor to the desired menu item.
For the ADI, rotate to adjust the baro setting on the secondary altitude display.
Turn
For the HSI, rotate to adjust the heading or track bug.
Turn to select the desired value when editing numeric data or selecting from a list.
WARNING
If NO BATT is displayed on the G5 attitude indicator, or green battery status is not shown
after pressing the power button on the G5 attitude indicator, do not fly in instrument
meteorological conditions.
HB AirHB-23/2400
System Messages
The G5 has the capability to display system messages to the crew along the bottom of the display. A system
message is indicated through a white indication on the G5.
Messages can be displayed by pressing the G5 knob and selecting the Message menu item.
Battery charger fault Battery charger has a fault condition – unit needs service.
Power supply fault Unit power supply fault detected – unit needs service.
Unit temperature limit
Unit is too hot or too cold.
exceeded
Network address Another G5 with the same address is detected on the network (most commonly
conflict a wiring error on one of the units).
General communication error (most commonly appears in conjunction with
Communication error
Network Address Conflict message).
Factory calibration
Unit calibration data not valid – unit needs service.
data invalid
Magnetic field model
Internal magnetic field database is out of date - software update required.
database out of date
Magnetometer The magnetometer has detected a fault – unit needs service. Heading data
Hardware fault may not be available.
Using external GPS GPS data from another network LRU is being used. The unit's internal GPS
data receiver is enabled, but unable to establish a GPS fix.
Not receiving RS-232 The G5 is not receiving RS-232 data from the GPS navigator – system needs
data service.
Not receiving ARINC The G5 is not receiving ARINC 429 data from the navigation source – system
429 data needs service.
GPS receiver fault The G5 on-board GPS receiver has a fault.
ARINC 429 interface The G5 ARINC 429 port is receiving information from an incorrect source –
configuration error system needs service.
Software version The G5 attitude indicator and the G5 HSI units have different software. Cross
mismatch fill of baro, heading and altitude bugs is disabled.
These messages remain while the condition persists.