Scribd
Upload
367 views

Document Title: Technical Proposal For 6500cbm LNG Storage Tank

This technical proposal outlines the design of a 6500 cubic meter LNG storage tank for an LNG carrier. The key details include: - The tank will have a single cylindrical shell with hemispherical heads, above deck arrangement, 12200mm diameter, 59900mm length, and 6500 cubic meter capacity. - The tank structure will include stiffening rings, an anti-sloshing plate, a dome on the top, and a sump at the bottom. - The tank foundations will include one fixed bearing and one slide bearing using wooden blocks and stainless steel sheets to allow for thermal movement. Anti-flotation devices will also be included. - Polyurethane foam

Uploaded by

roni_arsyah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
367 views

Document Title: Technical Proposal For 6500cbm LNG Storage Tank

This technical proposal outlines the design of a 6500 cubic meter LNG storage tank for an LNG carrier. The key details include: - The tank will have a single cylindrical shell with hemispherical heads, above deck arrangement, 12200mm diameter, 59900mm length, and 6500 cubic meter capacity. - The tank structure will include stiffening rings, an anti-sloshing plate, a dome on the top, and a sump at the bottom. - The tank foundations will include one fixed bearing and one slide bearing using wooden blocks and stainless steel sheets to allow for thermal movement. Anti-flotation devices will also be included. - Polyurethane foam

Uploaded by

roni_arsyah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Document

Technical Proposal For 6500cbm LNG Storage Tank


Title :

Document No : CLNG-23013-ENG-SPE-6500

Project : 6500 CBM LNG CARRIER

Equipment : TYPE C STORAGE TANK

C-LNG Project
23013
No :

A 07-02-23 For information ZRJ DH SDW

R Date Description Prepared Checked Approved


TABLE OF CONTENTS

TABLE OF CONTENTS.......................................................................................................................... 2

1. General………………………………………………………………………...……………………………… 3
1.1 Design condition ................................................................................................................................ 3
1.2 Classification, Rule& Regulations to be applied ................................................................................ 3

2. Tank General Data ............................................................................................................................ 3


2.2 Tank structure ................................................................................................................................... 3
2.3 Tank Foundations.............................................................................................................................. 4

Page 2 of 4
1. General
This technical proposal covers 1 LNG storage tanks.

1.1 Design condition


Tank volume/per tank 6500 m3
No. of tanks 1
IMO Type C
Tank shape Cylinder
Design pressure 5 bar g
Tank design external pressure TBD
Min. design temperature -163 ℃
Minimum impact test temperature -196 °C
Density for tank structural design 500 kg/m3
Tank material X7Ni9
Flag TBD
Class TBD

1.2 Classification, Rule& Regulations to be applied


- Classification Society Rules
- IGC Code
- Other rules acceptable to classification societies
2. Tank General Data
The tank is LNG storage tank IMO type C of single shell. The dimensions of each tank are as follows:
No. 1 Tank
Tank type Type C with single wall
Tank Shape Cylindrical
Heads Hemi-Spherical Head
Arrangement Above deck
Diameter inside 12200mm
Total length inside 59900mm
Total volume [m3] abt. 6500
Filling Limit 95%

2.2 Tank structure


LNG storage tank is independent, insulated and equipped with one (1) dome. On the top and one (1)
sump at the bottom. Stiffen rings and anti-sloshing plate (if any) are arranged inside the tank.

Page 3 of 4
2.3 Tank Foundations
To ensure free movement of the tanks due to temperature changes, one support is to be designed as a
fixed bearing and the other as a slide bearing. The supports are equipped with special impregnated and
laminated press wood. For the slide bearing, wooden blocks are installed on tank side as well on ship
side. Stainless steel sheets are installed between the wood blocks.
A set of anti-flotation devices are to be provided in order to keep the tank in position.

2.4 Tank Insulation


The outer surface of the tanks is to be insulated with polymeric coating. Thickness of Polyurethane foam
insulation shall be appox. 300 mm.
Data for tank insulation
λ-value ~0.023 W/m ℃
Thickness ~300 mm
Foam density ~ 40 kg/m3
B.O.R.(filling @ 89%) ~0.23 %/day
Class approval for tank by TBD
NOTE:
Detailed insulation calculation to be made by insulation maker.

Page 4 of 4

You might also like