Scribd
Upload
30 views

Type of Sensors

The document compares two wireless sensors: the TH110 Wireless Thermal sensor and the CL110 Wireless Environmental sensor. The Thermal sensor is battery-free and self-powered, measures temperature from -25 to 115 degrees Celsius, and has an accuracy of +/-1 degree. The Environmental sensor is battery-powered with a 15-year lifespan, measures both temperature and humidity, and also has an accuracy of +/-1 degree for temperature and 2% for humidity. Both sensors use 2.4GHz wireless communication and can be installed on conductive or insulated surfaces.

Uploaded by

Love you
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
30 views

Type of Sensors

The document compares two wireless sensors: the TH110 Wireless Thermal sensor and the CL110 Wireless Environmental sensor. The Thermal sensor is battery-free and self-powered, measures temperature from -25 to 115 degrees Celsius, and has an accuracy of +/-1 degree. The Environmental sensor is battery-powered with a 15-year lifespan, measures both temperature and humidity, and also has an accuracy of +/-1 degree for temperature and 2% for humidity. Both sensors use 2.4GHz wireless communication and can be installed on conductive or insulated surfaces.

Uploaded by

Love you
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Internal

Sensors characteristics
CL110 Wireless
TH110 Wireless Thermal sensor
Environmental sensor
 Battery free, self powered by the network  Battery powered, with life expectation ≥ 15 years
current (activation 5A)
 Accuracy :
 Accuracy : +-1 deg °C
• +-1 deg °C
 Range :- 25 deg to 115 °C
• 2% RH
 Wireless com protocol 2.4 GHz
 Range :
 31*31*14 mm
• 25 deg to 115 deg °C
 15 g
• 10 to 100% RH
 Could be installed directly on the conductive
metal part or on the shielded insulated part  Wireless com protocol 2.4 GHz

 Life time: 15 years average calculated  40*40*20 mm


31 Omm
 30 g
31 Omm
 Could be installed directly on the conductive metal part
13 Omm
or on the shielded insulated part

Internal
 Life time: 15 years average calculated
HeatTag:

The HeatTag is a wireless sensor for early detection of overheating wire


connections or overheating cables.
HeatTag is neither a fire detector nor a smoke detector. As shown in below between
120°C and 200°C, typical LV cable-insulation materials, such as PVC / XLPE / EPR,
are subject to invisible transformation. These abnormal conditions can be detected
HeatTag is an
by HeatTag. After 200°C, the insulation material begins to change color innovative smart
sensor able to analyze
HeatTag detects and analyzes the different gases and particles in the air of the gas and particles in
switchboard (14 gases measured, along with particles), applies a complex the switchboard and
algorithm to select internal cable issues from other phenomena, and can alerts before any
distinguish abnormal situations that indicate a cable is overheating and sends an smoke or insulator
alarm via email or SMS.
browning occurs
The output is in the form of AQI (Range: 0-10).
Air quality index from 0 to 9 is provided for information.
An alert is triggered when the air quality index is equal to 10.

Internal

You might also like