Scribd
Upload
92 views

Tutorial Sheet 1 KEE101

This document provides a tutorial sheet for a Basic Electrical Engineering course. It contains 12 problems involving circuit analysis techniques like nodal analysis, mesh analysis, source transformation, superposition theorem, Thevenin's theorem, and Norton's theorem. The problems ask students to find voltages, currents, and apply various analysis methods to circuits containing resistors and voltage sources. The answers to each problem are provided.

Uploaded by

Pranav
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
92 views

Tutorial Sheet 1 KEE101

This document provides a tutorial sheet for a Basic Electrical Engineering course. It contains 12 problems involving circuit analysis techniques like nodal analysis, mesh analysis, source transformation, superposition theorem, Thevenin's theorem, and Norton's theorem. The problems ask students to find voltages, currents, and apply various analysis methods to circuits containing resistors and voltage sources. The answers to each problem are provided.

Uploaded by

Pranav
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

AKGEC/CDT/FM/01

Ajay Kumar Garg Engineering College, Ghaziabad


Department of Electrical & Electronics Engineering
Tutorial Sheet -1
Course: B.Tech Semester: I
Session: 2021-22 Section: S-11
Subject: Basic Electrical Engg. Sub. Code: KEE -101T
______________________________________________________________________________

1. Find the node voltages (vx) and (vy) using nodal analysis for the circuit shown below

[Ans: Vx = 29.4, Vy = 17V]


2. Find the current through in 12 ohm resistor using mesh analysis for the network shown below.

[Ans: I12Ω = 9A]

3 . Find the supply current using star delta transformation for the circuit shown below.

[Ans: I = 1.05A]
4. Find the node voltages and branch currents using nodal analysis for the circuit shown in Fig
below

[Ans: V1 = 8V,V2= 12v, I2Ω = 1A, I1Ω= 3 A, I2 Ω = -2 A, I6Ω = 2A]


5.Find the mesh current using mesh analysis for the network shown below.

(ANS: I1= 3.75A, I2= 0A, I3= 1.25A)

6.Determine current flowing through 5 Ω resistor in the circuit shown below, Use source
transformation technique.

[Ans: I5Ω = 2.66A]

7. Find the current through 40 ohm resistor using superposition theorem.


(ANS : 0.086A )
8. Find the current through 1 ohm resistor using superposition theorem.

(ANS: 1.48 A)
9. Find the current through 2 ohm resistor using Thevenin’s theorem.

(ANS: 0.176 A)

10. Find the current through 10 ohm resistor using Thevenin’s theorem.

(ANS: 3.33 A)

Find current in 6 ohm resistor using Norton’s theorem.

(ANS: 0.5 A)
12. Find current in 5 ohm resistor using Norton’s theorem.

(ANS: 6.664 A)

You might also like