Machine Translated by Google
Version : AVRIL 2017
FTP_FR_MT26_18_30_3X150_MM2_Al_PE_NOR_NR
Cables Moyennes Tension NFC 33-226
MV cables NFC 33-226
MT
26 6/10 kV to 18/30 insulated
NF C 33-226
The cable MT 26 is a cable intended for the distribution of public medium tension from 6/10 kV to 18/30 kV. It
responds to the norm NF C 33-226.
This type of product is made up of three phase conductors, assembled in a torsade for the underground version, assembled
around a steel porter for the aerial version.
The MT 26 cable is a cable for the public power distribution 6/10 kV to 18/30 kV. It
meets the NF C 33-226 standard.
This type of product has three phase conductors, assembled twisted to the underground version assembled around a
steel support for aerial release.
Constitution / Design
1-Ame:
Aluminum or copper, round,
To install Classe 2 retreinte.
2 - Screen semi-conductor extruded :
Polyéthylène reticulé.
3 - Isolant extruded :
Polyéthylène reticulé.
4 - Screen semi-conductor extruded tubular peelable :
Elastomer.
Poudre gonflante sur semi
conductor to assure the
waterproofness.
5 - Screen metallic :
ruban aluminum
longitudinal collé à la gaine
exterior.
6- Gain de protection:
PE
General characteristics / General characteristics
Norm / Standard : NFC 33-226
Rayon of curvature / Bending factor when laying : 6,5
times the outer diameter of the cable for 3X and 13 times the outer diameter of the cable for 1X / 6,5
times external diameter of the cable for 3X and 13 times external diameter of the cable for 1X.
Modes of laying currents / Installation :
,
A l'air libre : fixation on support / Open air : mounting supports
* Enterré : avec protection mécanique / Buried : with mechanical protection
SERVICE METHODS SIM*** Page : 1/5 Bd Ahl Loghlam Ain Sebaa Route de Tit Mellil BP 2551 CASABLANCA
Machine Translated by Google
Version : AVRIL 2017
FTP_FR_MT26_18_30_3X150_MM2_Al_PE_NOR_NR
FICHE TECHNIQUE PRODUCT
1 - IDENTIFICATION OF THE PRODUCT :
Cable Type: tripolar
Code article: 57275150500
Designation Product : NFC33-226 18/30KV 3x150 AL 18/30
Current tension : kV
Tension minimum (U0) : kV 18
Tension nominal (Unom) : kV 30
Tension maximum (Umax) : kV 36
Norms of Fabrication: NFC 33-226
Number of conductors (phase) : 3
Section nominal of the soul (Phase) : mm² 150
Material conductor (phase) : ALUMINUM
Screen semi-conductor extruded (Internal) : XLPE
Type Isolant Conductor (phase) : Polyethylene reticule (PR)
Screen semi-conductor extruded (External) : XLPE
Section (Porter) : mm² SANS PORTEUR
Porter's material : SANS PORTEUR
Type Screen on Semi-conductor extruded (External) : Poudre gonflante + 1 Ruban Alu/PE
Type Gain External : P.E Normal
Color gain external : Noir
Gain with or without Anti termite : sans
Gain with or without anti rongeur : sans
PROPERTIES:
Cable NFC 33-226 18/30 3X150 mm² ALUMINUM Gaine en : PE
Product:
normal noir
2 - CHARACTERISTICS OF THE L'AME :
Information : PHASE Unity
Metal of the soul …………………………………………………………………. , ALUMINUM
Class of metal……………………………………………………………… : class 2
Type of soul ………………………………………………………………….. : Cables retreint
Form of the soul ………………………………………………………………………… : circular
Composition of the soul ……………………………………………………….. : 19 X 3.15
Section calculated of the soul …………………………………………… : 148.07 mm²
Diamètre mini de l'soul ……………………………………………………. , 14 mmm
Diameter maxi of the soul ………………………………………………………. , 14.1 mmm
DC Resistance linear max sur soul à 20 °C ………………………………. : 0.206 ohm/km
Temperature arm…………………………………………………….. : DC 90 °C
Resistance line max on arm aluminum at 90 °C (current continuous) : AC Resistance 0.264 ohm/km
line max on arm aluminum à 90 °C (Courant Alternative) : Pertes de charge maximum 0.265 ohm/km
(Monophasé) …………………………………. : Maximum charge rates 1.6006 kw/km
(Triphasé) ………………………………….. : 4.8018 kw/km
3 - CHARACTERISTICS ISOLANTS (3 Couches) :
SERVICE METHODS SIM*** Page : 2/5 Bd Ahl Loghlam Ain Sebaa Route de Tit Mellil BP 2551 CASABLANCA
Machine Translated by Google
Version : AVRIL 2017
FTP_FR_MT26_18_30_3X150_MM2_Al_PE_NOR_NR
FICHE TECHNIQUE PRODUCT
1 - IDENTIFICATION OF THE PRODUCT :
Information : A°/ value Unity
Semi conductor interne :
Epaisseur Mini Ecran Semi Conducteur INTERNE ( en tout point ) …………… : 0.45 mmm
Epaisseur Mini Ecran Semi Conducteur INTERNE ( en 1 point ) …………… : 0.35 mmm
Epaisseur Nominale Ecran Semi Conducteur extrudé … ………………………... : 0.5 mmm
Epasseur Maxi Screen Semi Conductor INTERNE , , 0.55 mmm
Diameter approximative sur Semi Conductor INTERNE ………………………………….. : 15.2 mmm
Electrical Resistivity of the screen at (90° +/- 2°) C ……………………… <= 1000 Ohm.m
…………………. : B°/ Isolant : Epaisseur Mini Isolant ( en tout 6.45 mmm
point )……………………………………………………………….. : Epaisseur Mini 5.75 mmm
6.5 mmm
Isolant ( en 1 point ) ………… …………………………………………………….. : Epaisseur Nominale Isolant ………………………………………………………
Epaisseur Maxi Isolant ………………………………………………………………………………… : 6.55 mmm
Approximate Diameter on Isolant……………………………………………………………….. : 28.3 mmm
Resistance to traction ……………………………………………………………………………………….. : >= 12.5 MPa
Lengthening at the rupture ……………………………………………………………………………. : >= 200 ,
C°/ Semi conductor extèrne :
Epaisseur Mini Ecran Semi Conducteur EXTERNE ( en tout point) 0.45 mmm
…………… : Epaisseur Mini Ecran Semi Conducteur EXTERNE ( en 1 point) 0.35 mmm
………………………... : Epaisseur Nominale Ecran , 0.5 mmm
Semi Conducteur EXTERNE Epaisseur Maxi ,, 0.55 mmm
Ecran Semi Conducteur EXTERNE Diamètre ………………………………….. : 29.4 mmm
approximatif sur Semi Conducteur EXTERNE Height Mini des Cannelures sur 0.45 mmm
,,
Semi Conducteur EXTERNE ( en tout point) … : Height Nominale des Cannelures 0.5
sur Ecran Semi Conducteur EXTERNE mmm
Hauteur Maxi des Cannelures sur Ecran Semi Conducteur EXTERNE …………………. , 0.55 mmm
Approximate Diameter on Cannelures …………………………………………………………………... : 30.5 mmm
Resistance to traction ……………………………………………………………………………………….. : >= 7 MPa
Lengthening at the rupture ……………………………………………………………………………. : >= 150 ,
Electrical resistivity of the screen at (90° +/- 2°) C …………………………………………. : <= 500 Ohm.m
Gradient to the level of the screen on the soul ……………………………………………………… : 3.81 kv/mm
Gradient to the level of the screen on env. isolation………………………………………….. : 2.05 kv/mm
4 - CHARACTERISTICS SCREEN METALLIC :
Information : value Unity
Number of rubs ……………………………………………………………………………………… : 1
Epaiseur Ruban ……………………………………………………………………………………… : 0.2 mmm
Face in Aluminum on the inside and on the other face
Matériaux ruban…………………………………………………………………………………….. :
outdoor polyethylene
Methode d'utilisation ………..……………………..……………………………………………………………… : en long
Approximate diameter of ribbon ………………………………………………………………… : 31 mmm
Electrical resistance of the metallic screen …………………………………………… ……. , <= 2 ohm/km
5 - CHARACTERISTICS OF THE GAIN OF PROTECTION :
SERVICE METHODS SIM*** Page : 3/5 Bd Ahl Loghlam Ain Sebaa Route de Tit Mellil BP 2551 CASABLANCA
Machine Translated by Google
Version : AVRIL 2017
FTP_FR_MT26_18_30_3X150_MM2_Al_PE_NOR_NR
FICHE TECHNIQUE PRODUCT
Information : 1 - IDENTIFICATION OF PRODUCT : Epaisseur Mini de gain ( en 1 point) value Unity
………………………..………………………………………… : Epaisseur Nominale de gain 1.77 mmm
…… …………………………………………………………………………….. : 2.2 mmm
Epressor Maxi de gaine …………………………………………………………………………….. : 2.25 mmm
Approximate diameter on gain ………………………………………………………………… : 35.42 mmm
Resistance to traction …………………………………………… …………………………………………… : >= 12.5 MPa
Lengthening to rupture …………………………………………………………………………… : >= 300 ,
Nexans - NFC 33-226 - 150 mm² Al - 18/30 (36) kV - W Numéro_de_semaine et
Marquage sur Gaine:
Année_de_Fabrication - POPY - EI=6.5 mm - EC=0.2 mm - EG=2.2 mm
Nature of marqueage: Mollettes Relief à chaud
6 - ASSEMBLAGE DU CABLE :
Information : value Unity
Diameter of cable …………………………………………………………………..………………………………………… : 76.51 mmm
Rayon of curvature ……………..…………………………………………………………………………………….. : 497 mmm
Marking on Cable Assemblé …………… …………… : MARQAGE METRICN° PHASE , , N° DE TOURET DE RECEPTION
7 - CHARACTERISTICS COLLISION STANDARD :
Information : value Unity
Poids Net Approximate: 3 681.0 kg/km
Type of Tourette Bois: PT
Fabrication standard length: 250 mt/tourette
Diamètre Joue sans douves : 2300 mmm
Largeur hors tout: 1160 mmm
Diamètre Joue sur douves extèrnes : 2340 mmm
Poids Brut approximative (Produit + Touret) Sans douves : 1 216.3 Kg/Km
Poids Brut approximate (Produit + Touret) Avec douves : 1 303.0 Kg/Km
8 - ELECTRICAL CHARACTERISTICS :
Information : value Unity
[Dm] = Distance between the threads including the thickness of the insulator : 30.1 mmm
Frequency………………………………………………………………………………………………. , 50 Hz
Length of the cable 1 kilometers
………………………………………………………………………………………………… : Cos(Phi) (if 0.8
the illumination value is 1 / if the starting force of the motor is the value [r] = 7.05 mmm
4.269503546
Rayon ray ……………………………………………………………… …………… : Dm/r ……………………………………………………………………………………… :
[L] = Coefficient of Self-Induction …………………………………………………….. : 0.34 mH/km
Inductance (Réactance) ………………………………………………………………… : 0.1068 ohm/km
Impedance at 50Hz et 90°C ……………………………………………………….. : 0.285 ohm/km
Capacitance ………………………………….…………………… 0.18 µF/km
………………………………….. : Line resistance of the conductor …………………………………………….. : 0.2400 A/km
SERVICE METHODS SIM*** Page : 4/5 Bd Ahl Loghlam Ain Sebaa Route de Tit Mellil BP 2551 CASABLANCA
Machine Translated by Google
Version : AVRIL 2017
FTP_FR_MT26_18_30_3X150_MM2_Al_PE_NOR_NR
FICHE TECHNIQUE PRODUCT
Intensity Admissible 1
(A)- IDENTIFICATION OF THE PRODUCT : Drop the tension ()
cable entry Cable on tablets Cos fi = 0.3 Cos fi = 0.8 0.33 0.49
304 369
, The admissible intensities are given for a pose in a tree at a depth of 0,8 m.
106 107 108 109
9 - CHARACTERISTICS OF THE PORTEUR :
Information : PHASE Unity
Number of princes and porters ………………………………………………………………. ,
Diameter of brin…………………………………………………………………………………… : mmm
Diamètre a porter ………………………………………………………………………….. : Matière mmm
isolation du porter ……………………………… ………………………………….. :
Epressor Mini in one point ………………………………………………………………….. : mmm
Epaiseur moyenne Mini …………………………………………………………………………… : mmm
Epressor Nominale ……………………………………………………………………………. : Epaisseur mmm
Maxi ……………………………………………………………………………………..……. : Diameter mmm
approximatif sur isolant porteur ……………………………………………. : Couleur isolant mmm
……………………………………………………… ………………………………….. : °C
The minimum rupture charge………………………………………………………………. , kN
SERVICE METHODS SIM*** Page : 5/5 Bd Ahl Loghlam Ain Sebaa Route de Tit Mellil BP 2551 CASABLANCA
