Scribd
Upload
167 views

Product Certificate

1. This product certificate provides information on an SMAW welding product called AS B-248 supplied to customer JAIDAH MOTORS & TRADING CO. 2. The product has a dimension of 3.25X450mm, product code 71G200390004, and amount of 5.004kg. 3. Chemical and mechanical test results that meet relevant standards are provided to certify the product.

Uploaded by

MURSHID MUHAMMED
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
167 views

Product Certificate

1. This product certificate provides information on an SMAW welding product called AS B-248 supplied to customer JAIDAH MOTORS & TRADING CO. 2. The product has a dimension of 3.25X450mm, product code 71G200390004, and amount of 5.004kg. 3. Chemical and mechanical test results that meet relevant standards are provided to certify the product.

Uploaded by

MURSHID MUHAMMED
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PRODUCT CERTIFICATE

Product :AS B-248 Customer No :100624


Dimension(s) :3.25X450 Order No :10005742
Product Code :71G200390004 Amount :5.004 KG
Product Type :SMAW Customer Name :JAIDAH MOTORS & TRADING CO.
Batch No :2L1104319+2L1104117 Delivery No :80398632
Delivery No :A-504233
Classifications :AWS A5.1: E7018
:EN ISO 2560-A: E 42 3 B 42 H10
:

Chemical Analysis (%) * EN 10204 2.2


C (%) Si (%) Mn (%) S (%) P (%) Cr (%) Ni (%) Mo (%) Cu (%) Nb (%) V (%)
0,062 0,370 0,996 0,006 0,009 0,038 0,058 0,007 0,075 0,004 0,008

* Chemical composition samples of the covered electrodes and flux cored wires are taken from weld metal. Chemical composition samples of the
solid wires are taken from raw material wire.
Mechanical Analysis of Weld Metal EN 10204 2.2
Tensile Test Impact Test
Cond. ** Tensile Yield Elongatio Cond. ** Notch Temp. Avr.
N/mm2 N/mm2 % ˚C Joule
556 485 29 ISO-V -30 160
** PWHT: Post-Weld Heat Treatment AW: As-Welded

Other Tests EN 10204 2.2


Hydrogen Content: 7,4 (ml/100g

Additional Information

1-The product which is mentioned above is produced and controlled according to ISO 9001 Quality Management System.
2-It should be noted that the results of chemical and mechanical tests could vary from those production joints because of different welding
parameters.
3-Mechanical and chemical test results are up to date.

Kaynak Tekniği San. ve Tic A.Ş. Date Certificate No


TOSB Otomotiv Yan Sanayi İhtisas Organize Sanayi Bölgesi 25.09.2019 19021603
2.Cadde No:5, Şekerpınar Çayırova 41420 - Kocaeli
Tel: 0262 679 77 35 Faks: 0262 679 77 00
www.askaynak.com.tr

You might also like