Scribd
Upload
128 views1 page

Torque Test Nut

The document describes two rock bolt accessories: a torque test nut that can be installed with roof bolts to ensure bolting rigs are applying sufficient torque, breaking out between 250-270 Nm, and identifying rigs that can exceed 8 tonnes of pre-tension; and a 36mm hex socket with a 25mm square drive, suitable for common bolting rigs and rock bolt installations. Both accessories aid in regularly checking and maintaining appropriate torque levels in roof bolting rigs.

Uploaded by

Anish Pokharel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
128 views1 page

Torque Test Nut

The document describes two rock bolt accessories: a torque test nut that can be installed with roof bolts to ensure bolting rigs are applying sufficient torque, breaking out between 250-270 Nm, and identifying rigs that can exceed 8 tonnes of pre-tension; and a 36mm hex socket with a 25mm square drive, suitable for common bolting rigs and rock bolt installations. Both accessories aid in regularly checking and maintaining appropriate torque levels in roof bolting rigs.

Uploaded by

Anish Pokharel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Rock Bolt Accessories

Torque Test Nut

Features:
• A high torque roll pin with break-out set to 250-270 N.m break-out
• Colour coded bright pink nut to distinguish from regular bolts
• Can be placed within every bolting pod to ensure bolting rigs are regularly checked for torque output
• The bolt can be installed as part of the normal support pattern, with the high tensile nut being fully rated for X
grade roof bolts
• A successful break-out indicates the bolting rigs are able to exceed 8 tonnes pre-tension on normal roof bolts

Bolt Thread Torque Break-out (Nm)

M24 250-270

36 A.F. Dolly

Features:
• 36mm A.F. socket to suit standard rock bolt installations
• 25mm locking square drive suitable for common coal mining rock bolting rigs

Drive (mm) Length (mm) Socket (mm)

25 square 300-600 36 Hex

www.jennmar.com.au

16

You might also like