EMC FINGER CATAOLUGE 2021 - 2022
Contact Strips
2 Contact Strips
Made of Copper Beryllium
Application Materiai
Due to their outstanding materiai and Code designation: CuBe2
electrical characteristics, copper beryllium Alloy: C17200
fingers of different shapes and dimensions Design: Strip materiai, heat
are used in the following industries: treated after moulding,
Broadcasting, telecommunication, industriai DIN EN 1654
contrai, measuring and instrumentation,
aerospace technology, nuclear physics and
Physical Characteristics Disclaimer
Specific weight: 8.4 g/cm3 AII information in this catalogue has been
data processing. Contact fingers and rings
Melting point: 900 °C compiled with care and done to the best of
made of copper beryllium are used at ali
Coefficient to expansion: our knowledge. Measured data are in ac
radio and microwave frequencies, for instance
(20-200° C) 17x10-6/° C cordance with current MIL- or DIN standards.
as contacts to tubes and tuning components
Thermal conductivity: 0.27 cal/cm • s • °C Because of the different fields of application
as well as for shielding.
1.13 W/cm · ° C and test methods it is recommended, however,
Materiai Properties Vickers hardness: 350--430 to take your own measurements. In the end,
The copper beryllium (CuBe2) used for our Tensile strength: 1200-1450 N/mm2 this is the only way to test the suitability of
products is a quality tested quench hardening Bending resistance at 1os our products for your special application.
spring materiai. lt is noteworthy for its yield Load cycles: 250-290 ±N/mm2 For electrical specifications there are no
point, tensile strength and elasticity, good Modulus of elasticity: 135000 N/mm2 warranty.
electrical conductivity, high fatigue strength Modulus of torsion: 47000 N/mm2 All length measurements are rounded.
as well as its resistance to abrasion and Spring bending limit: 820-950 N/mm2 Change of technical data, errar and misprints
corrosion. The good thermal conductivity Electrical conductivity: 12.5-13 m/Qmm2 reserved.
coupled with hardness eliminates sparking.
The raw materiai is non-magnetic and has
Delivery Options Edition 20.9
■ As strips in standard length, endless,
an excellent temperature performance.
cut to length or formed into a ring
■ Standard springs from stock at short
notice available
■ Finish: bright, silver-plated, gold-plated,
tin-plated, nickel-plated or according
to customer requirements
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
Contact Strips
Contact Strips 3
Made of Stainless Steel
,,
,,
,,
,
(It materiai no. 1.431O). The materiai used is stainless strip steel for springs: a materiai with extraordinary toughness, good spring
characteristics, and long service life. The anti-corrosion properties are excellent, with the result that the contact surfaces are always smooth
and shiny. The shielding properties are very good, but the attenuation values that can be achieved are less than with CuBe.
Materiai Mechanical Properties
Materiai number: 1.431O Tensile strength: 1220 (RM N/mm2)
Characteristics: stainless steel, steel tape, cold-rolled Yield strength: 987 (RP N/mm2)
DIN 17224, EN 10258 Strain: 31.00 (L=80mm)
Chemical Composition: (Data given in Percent}
e 0.096 Si 0.63 Mn 0.89 p 0.029
s 0.005 Cr 17.12 Mo 0.22 Ni 7.29
Ti 0.000 Al 0.000 Cu 0.000 V 0.000
w 0.000 Cb/Ta 0.000 Fe 73.6
Please note that the dimensions of the V2A-springs may vary from the CuBe- springs, due to the different materiai conditions.
Contact our sales team for further information.
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
SOLIANI EMC - via varesina 122 Como (22100) Italy - Made in italy - ISO 9001/ ISO 9100
