0% found this document useful (0 votes)
682 views7 pages

MSDS Rust-Remover-SDS5048

This safety data sheet provides information on a rust remover product. It lists the product name and identifier, supplier contact information, classification and hazards, composition including 10-30% oxalic acid, and first aid measures. It also details firefighting measures, accidental release measures, safe handling guidelines, exposure controls and personal protective equipment, physical and chemical properties, stability and reactivity, toxicological information, disposal considerations and regulatory information.

Uploaded by

niko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
682 views7 pages

MSDS Rust-Remover-SDS5048

This safety data sheet provides information on a rust remover product. It lists the product name and identifier, supplier contact information, classification and hazards, composition including 10-30% oxalic acid, and first aid measures. It also details firefighting measures, accidental release measures, safe handling guidelines, exposure controls and personal protective equipment, physical and chemical properties, stability and reactivity, toxicological information, disposal considerations and regulatory information.

Uploaded by

niko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Revision date: 26/07/2016 Revision: 1

SAFETY DATA SHEET


Rust Remover
According to Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice, December 2011

SECTION 1: Identification: Product identifier and chemical identity

Product identifier
Product name Rust Remover

Internal identification SNRUSTREM

Relevant identified uses of the substance or mixture and uses advised against
Application Rust remover for carpet and upholstery

Uses advised against Use only for intended applications.

Details of the supplier of the safety data sheet


Supplier Sonitron
42 Redcliffe Gardens Drive
Clontarf, QLD, 4019
+61 7 3283 4511

Contact Person Poisons Information 131126 or Brennan Stark 0428 835 855

Manufacturer Eco Pro Australia Pty Ltd


42 Redcliffe Gardens Drive, Clontarf, QLD, 4019
+61 7 3283 4511
[email protected]

Emergency telephone number


Emergency telephone Poisons Information 131126 or Brennan Stark 0428 835 855

SECTION 2: Hazard(s) identification

Classification of the substance or mixture


Physical hazards Not Classified

Health hazards Not Classified

Environmental hazards Not Classified

Label elements
Hazard statements NC Not Classified

Other hazards
This product does not contain any substances classified as PBT or vPvB.

SECTION 3: Composition and information on ingredients

Mixtures

1/7
Revision date: 26/07/2016 Revision: 1

Rust Remover

Oxalic acid 10-30%


CAS number: 144-62-7

Classification
Acute Tox. 4 - H302
Acute Tox. 4 - H312

The full text for all hazard statements is displayed in Section 16.

SECTION 4: First aid measures

Description of first aid measures


General information If in doubt, get medical attention promptly. Show this Safety Data Sheet to the medical
personnel.

Inhalation No specific recommendations. If throat irritation or coughing persists, proceed as follows.


Move affected person to fresh air and keep warm and at rest in a position comfortable for
breathing. Loosen tight clothing such as collar, tie or belt. Get medical attention if any
discomfort continues.

Ingestion No specific recommendations. If throat irritation or coughing persists, proceed as follows.


Rinse mouth. Get medical attention if any discomfort continues.

Skin Contact No specific recommendations. Rinse with water. Get medical attention if any discomfort
continues.

Eye contact Rinse with water. Get medical attention if any discomfort continues.

Protection of first aiders Use protective equipment appropriate for surrounding materials.

New category

Most important symptoms and effects, both acute and delayed


General information The severity of the symptoms described will vary dependent on the concentration and the
length of exposure.

Inhalation No specific symptoms known. Spray/mists may cause respiratory tract irritation.

Ingestion No specific symptoms known. May cause discomfort if swallowed.

Skin contact No specific symptoms known. May cause discomfort.

Eye contact No specific symptoms known. May be slightly irritating to eyes.

Indication of any immediate medical attention and special treatment needed


Notes for the doctor Treat symptomatically.

Specific treatments No special treatment required.

SECTION 5: Firefighting measures

Extinguishing media
Suitable extinguishing media The product is not flammable. Extinguish with alcohol-resistant foam, carbon dioxide, dry
powder or water fog. Use fire-extinguishing media suitable for the surrounding fire.

Unsuitable extinguishing Do not use water jet as an extinguisher, as this will spread the fire.
media

Special hazards arising from the substance or mixture


Specific hazards Containers can burst violently or explode when heated, due to excessive pressure build-up.

2/7
Revision date: 26/07/2016 Revision: 1

Rust Remover

Hazardous combustion Thermal decomposition or combustion products may include the following substances:
products Harmful gases or vapours.

Advice for firefighters


Protective actions during Avoid breathing fire gases or vapours. Evacuate area. Cool containers exposed to heat with
firefighting water spray and remove them from the fire area if it can be done without risk. Cool containers
exposed to flames with water until well after the fire is out. If a leak or spill has not ignited, use
water spray to disperse vapours and protect men stopping the leak. Control run-off water by
containing and keeping it out of sewers and watercourses. If risk of water pollution occurs,
notify appropriate authorities.

Special protective equipment Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
for firefighters clothing. Firefighter's clothing conforming to Australia/New Zealand Standards AS/NZS 4967
(for clothing) AS/NZS 1801 (for helmets), AS/NZS 4821 (for protective boots), AS/NZS 1801
(for protective gloves) will provide a basic level of protection for chemical incidents.

SECTION 6: Accidental release measures

Personal precautions, protective equipment and emergency procedures


Personal precautions No specific recommendations. For personal protection, see Section 8.

Environmental precautions
Environmental precautions Avoid discharge into drains or watercourses or onto the ground.

Methods and material for containment and cleaning up


Methods for cleaning up Reuse or recycle products wherever possible. Absorb spillage to prevent material damage.
Flush contaminated area with plenty of water. Wash thoroughly after dealing with a spillage.
Dispose of contents/container in accordance with national regulations.

Reference to other sections


Reference to other sections For personal protection, see Section 8.

SECTION 7: Handling and storage, including how the chemical may be safely used

Precautions for safe handling


Usage precautions Read and follow manufacturer's recommendations. Wear protective clothing as described in
Section 8 of this safety data sheet. Keep away from food, drink and animal feeding stuffs.
Handle all packages and containers carefully to minimise spills. Keep container tightly sealed
when not in use. Avoid the formation of mists.

Advice on general Wash promptly if skin becomes contaminated. Take off contaminated clothing and wash
occupational hygiene before reuse. Wash contaminated clothing before reuse.

Conditions for safe storage, including any incompatibilities


Storage precautions No specific recommendations.

Storage class Chemical storage.

Specific end use(s)


Specific end use(s) The identified uses for this product are detailed in Section 1.2.

SECTION 8: Exposure controls and personal protection

Control parameters

Exposure controls

3/7
Revision date: 26/07/2016 Revision: 1

Rust Remover

Appropriate engineering No specific ventilation requirements.


controls

Eye/face protection No specific eye protection required during normal use. Large Spillages: Eyewear complying
with an approved standard should be worn if a risk assessment indicates eye contact is
possible.

Hand protection No specific hand protection recommended. Large Spillages: Wear protective gloves.

Hygiene measures Wash hands thoroughly after handling. Wash at the end of each work shift and before eating,
smoking and using the toilet. Do not eat, drink or smoke when using this product.

Respiratory protection No specific recommendations. Provide adequate ventilation. Large Spillages: If ventilation is
inadequate, suitable respiratory protection must be worn.

Environmental exposure Not regarded as dangerous for the environment.


controls

SECTION 9: Physical and chemical properties

Information on basic physical and chemical properties


Appearance Clear, yellowish liquid.

Colour Colourless to pale yellow.

Odour Faint chemical odour

pH 1-3

Specific Gravity 1.1

Solubility Value (g/100g H2O Miscible with water.


20°C)

SECTION 10: Stability and reactivity

Reactivity There are no known reactivity hazards associated with this product.

Stability Stable at normal ambient temperatures and when used as recommended. Stable under the
prescribed storage conditions.

Possibility of hazardous No potentially hazardous reactions known.


reactions

Conditions to avoid There are no known conditions that are likely to result in a hazardous situation.

Materials to avoid No specific material or group of materials is likely to react with the product to produce a
hazardous situation.

Hazardous decomposition Does not decompose when used and stored as recommended. Thermal decomposition or
products combustion products may include the following substances: Harmful gases or vapours.

SECTION 11: Toxicological information

Information on toxicological effects


Toxicological effects Not regarded as a health hazard under current legislation.

Acute toxicity - oral


Notes (oral LD₅₀) Based on available data the classification criteria are not met.

4/7
Revision date: 26/07/2016 Revision: 1

Rust Remover

ATE oral (mg/kg) 5,000.0

Acute toxicity - dermal


Notes (dermal LD₅₀) Based on available data the classification criteria are not met.

ATE dermal (mg/kg) 11,000.0

Acute toxicity - inhalation


Notes (inhalation LC₅₀) Based on available data the classification criteria are not met.

Skin corrosion/irritation
Animal data Based on available data the classification criteria are not met.

Serious eye damage/irritation


Serious eye damage/irritation Based on available data the classification criteria are not met.

Respiratory sensitisation
Respiratory sensitisation Based on available data the classification criteria are not met.

Skin sensitisation
Skin sensitisation Based on available data the classification criteria are not met.

Germ cell mutagenicity


Genotoxicity - in vitro Based on available data the classification criteria are not met.

Carcinogenicity
Carcinogenicity Based on available data the classification criteria are not met.

IARC carcinogenicity None of the ingredients are listed or exempt.

Reproductive toxicity
Reproductive toxicity - fertility Based on available data the classification criteria are not met.

Reproductive toxicity - Based on available data the classification criteria are not met.
development

Specific target organ toxicity - single exposure


STOT - single exposure Not classified as a specific target organ toxicant after a single exposure.

Specific target organ toxicity - repeated exposure


STOT - repeated exposure Not classified as a specific target organ toxicant after repeated exposure.

Aspiration hazard
Aspiration hazard Based on available data the classification criteria are not met.

General information No specific health hazards known. The severity of the symptoms described will vary
dependent on the concentration and the length of exposure.

Inhalation No specific symptoms known. Spray/mists may cause respiratory tract irritation.

Ingestion No specific symptoms known. May cause discomfort if swallowed.

Skin Contact No specific symptoms known. May cause discomfort.

Eye contact No specific symptoms known. May be slightly irritating to eyes.

Route of entry Ingestion Inhalation Skin and/or eye contact

Target Organs No specific target organs known.

SECTION 12: Ecological Information

5/7
Revision date: 26/07/2016 Revision: 1

Rust Remover

Ecotoxicity Not regarded as dangerous for the environment. However, large or frequent spills may have
hazardous effects on the environment.

Toxicity Based on available data the classification criteria are not met.

Persistence and degradability


Persistence and degradability The degradability of the product is not known.

Bioaccumulative potential
Bioaccumulative Potential No data available on bioaccumulation.

Mobility in soil
Mobility No data available.

Results of PBT and vPvB assessment


Other adverse effects
Other adverse effects None known.

SECTION 13: Disposal considerations

Waste treatment methods


General information The generation of waste should be minimised or avoided wherever possible. Reuse or recycle
products wherever possible. This material and its container must be disposed of in a safe
way.

Disposal methods Dispose of surplus products and those that cannot be recycled via a licensed waste disposal
contractor. Waste packaging should be collected for reuse or recycling. Incineration or landfill
should only be considered when recycling is not feasible. Waste should not be disposed of
untreated to the sewer unless fully compliant with the requirements of the local water
authority.

SECTION 14: Transport information

General The product is not covered by international regulations on the transport of dangerous goods
(IMDG, IATA, ADR/RID).

UN number
Not applicable.

UN proper shipping name


Not applicable.

Transport hazard class(es)


No transport warning sign required.

Packing group
Not applicable.

Environmental hazards

Environmentally hazardous substance/marine pollutant


No.

Special precautions for user


Not applicable.

6/7
Revision date: 26/07/2016 Revision: 1

Rust Remover

Transport in bulk according to Not applicable.


Annex II of MARPOL 73/78
and the IBC Code

SECTION 15: Regulatory information

Safety, health and environmental regulations/legislation specific for the substance or mixture

Inventories
Australia - AICS
None of the ingredients are listed or exempt.

SECTION 16: Any other relevant information

Training advice Only trained personnel should use this material.

Revision date 26/07/2016

Revision 1

SDS No. 5048

General Information The following risk and hazard statements are to be considered a glossary. They relate to the
raw materials used in this product and therefore may not be accurate for the finished product
itself. For the complete risk and hazard statements for this product please refer to section 2 of
this Safety Data Sheet

Hazard statements in full H302 Harmful if swallowed.


H312 Harmful in contact with skin.

This information relates only to the specific material designated and may not be valid for such material used in combination
with any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurate
and reliable as of the date indicated. However, no warranty, guarantee or representation is made to its accuracy, reliability or
completeness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.

7/7

You might also like