Fire fig

hting
linkage
WP

Monitor

Va titio
Pa
rie n
r
EN54

d
PA
Content
1 System Introduction 2 Function & Features 3 Product Overview

 System Overview  Function & Features  Series

 Signal Partition  Production
 Power Partition
System Overview

Curently, you may find the size of buildings are getting bigger and higher, and the entire region area is wider and wider. The voice alarm evacuation system,
using traditional analog signal transmission and monitoring technology, not only needs to solve signal attenuation problem during long distance
transmission, but also need to solve different space environment of the electric and magnetic harassment, and facing many problems, including the
construction cost, wiring, maintenance upgrade in the future, centralized control and monitoring of the system, data backup, line redundancy and so on...
So in order to solve the above problems, ITC VA-6000 system came into being.
System Overview

Voice Alarm Evacuation System

VA-6000 Series

A set of system can meet the demands of voice alarm message,

paging and background music broadcasting.

Support linkage with multi - wired or bus - based voice alarm

evacuation controller, with advanced system automatic fault
diagnosis technology, speaker lines automatic detection
technology and data lines automatic redundancy technology,
which make the system to run safer, more stable and reliable.

Voice alarm evacuation system is with pre-configured multiple

alarm schemes, voice reminding message, evacuate the crowd;

remote guidance and evacuation can be conducted through the
software, controller and fireman microphone.
System Diagram
Volume Speaker
Control

Zone1

MIC Charger VA-6000BC

Battery
Zone2
Digital Amplifier
CD Player Power Supply

Voice Recorder VA-6000RC Changeover VA-6000MS Zone3

Switch

Signal Partition Solution

Digital Amplifier
Controller VA-6000MA Zone4
…
…
Zone252

Charger VA-6000BC
Battery
CAT6 Paging MIC Fireman MIC Zone253
VA-6000RM VA-6000FM Digital Amplifier
Power Supply
Audio Cable

RVV Wire Changeover VA-6000MS Zone254

Telephone
Power Cable
Fire linkage Control PC
signal Digital Amplifier
Metallic Yarn Zone255
System Diagram
Volume Speaker
Control

Zone1

MIC Charger VA-6000BC

Battery
……
Digital Amplifier
CD Player Power Supply

Voice Recorder VA-6000RC 8 Zone Amplifier VA-P8500S Zone7

Switch

Power Partition Solution

Controller VA-6000MA Zone8
…
…

Zone248

Charger VA-6000BC

CAT6 Battery
……
Paging MIC Fireman MIC
VA-6000RM VA-6000FM Digital Amplifier
Audio Cable Power Supply

RVV Wire
8 Zone Amplifier VA-P8500S Zone254
Power Cable Telephone

Metallic Yarn Fire linkage Control PC

signal Zone255
Functions and Features
Signal VC Speaker
Partition

Zone1

Broadcasting mic Charger VA-6000BC

Battery
Zone 2
Class D amplifier
CD player Power supply for devices

Recorder VA-6000RC Changeover VA-6000MS Zone 3

Signal + Power Partition Switch

Solution
Class D amplifier
Controller host VA-6000MA Zone 4
Power ……
Partition
Zone 248
Nerwork cable
Charger VA-6000BC

Audio Cable Battery

……
Business mci Fireman Mic
VA-6000RM VA-6000FM Class D amplifier
Power supply for devices
RVV cable

Power Cable
Eight-zone amplifier VA-P8500S Zone 254

Speaker cable Telephone

Fire alarm Control software/PC

signal Zone 255
Content CONTENT

1 System Introduction 2 Function & Features 3 Product Overview

 System overview  Function & Features  Series

 Signal partition  Production
 Power partition
1. Comply with Fire Standards

 Compliant to the requirement of EN54-16

and GB16806-2006 Fire standard, with
EN54-16 and CCCF certificates
2. Based on Local Area Network (LAN) Hardware Technology and Network Protocal

 Only CAT-5 cable is needed between system devices, which can simultaneously transmit multiple high-quality digital audio signals
and control signals.

CAT-5 Network cable

3. Integrating Both VA+ PA Functions

 Integrating with voice alarm evacuation, remote paging and background music play functions into one system.
4. Flexible Zone Configuration

 Support maximum 255 power partitions solution, 255 signal partitions solution or 255 power partitions by 32pcs VA-8500S +
(255-32=223) signal partitions by 28pcs VA-6000MS

VA-8500S 8 Zones Amplifier

VA-6000MS Changeover
5. 4 Independent messages

 Built-in 4 independent messages, inlcuding

EVAC, Alert, Clear message and background
music player, users can change freely according
to the site environment, languages and
preferences, and also can play them to different
zones simultaneously.

EVAC ,Alert,Clear message ,SD CARD

6. Easy to Operate

 Windows software interface operation and control

 Support embedded 5" full-color LCD touch screen
operation and control on host VA-6000MA
 Off-line operation after downloading the
configuration from the software
7. Status Real Time Monitor

 Real time monitor bus loops between devices,

can achieve automatic fault diagnosis, data
backup, redundancy
 Recording fault status can be up to 2000 logs
 Zone status control and management interface is
very clear

Management Software Interface

8. Linkage Trigger

 CAN bus linkage control interface and multi-wired

linkage control interface are distributed in the system
host, changeover, and zone power amplifier
 Support up to 528 input/output programmable linkage
control interfaces, which is convenient for integration
with third-party systems
 Trigger mode: level mode and dry contact mode
 It can be set as automatic trigger output or manually
trigger.
 Voice Alarm can be neighbor zone triggered or
designated zones triggered.

Setting of Management Software

9. 13 Channels Inputs

 13 channels inputs can be output to different

power and signal partitions simultaneously,
including one PTT mic input from contorller, 4
remote mics inputs, 2 emergency audio inputs, 4
AUX inputs, 1 telephone input and 1 BGM input.

4 line in

Tel input 4 Mic in 2 EVAC Message

10. Program Timing

 The system is built in MP3 player and program

timer, which enables the timing playing diversifed
and flexible. The users can set the timing
programs accoding to different requirements.
11.One Key Touch for Emergency Alarm and One Key Touch for Reset

 The host support one key touch for emergency alarm and one key touch for reset, ensuring the system responses quicky
during emergency situation
12.Host Backup

 The backup host can replace the master host automatically when it fails to work, which makes the system keep
working continually.
13. Amplifier Backup

 8 zone amplifier VA-8500S and changeover VA-

6000MS have amplifier backup function, ensuring the
backup amplifier can replace the main amplifier
automatically when it fails to work.
 Support 1 spare amplifier back up 8 main amplifiers
to save the cost
14. Amplifier Sleeping Mode

 When there is no task, amplifier will enter into sleeping mode automatically to save power, and wake up automatically
when there is a task
15.Remote Paging and Remote Control

 The system can connect with 4 remote business/firemen microphones, and up to 32pcs touch screen microphones;
support remote program playing, zone control, one-key touch for reset and local programs inserting, etc.
16. Telephone Remote Announcement

 Integrated telephone voice interface, which is convenient for remote

operation and control with the fire alarm network. It also supports event-
triggered call, can be set re-calling times when no answer.

VA-6000MA
17. Real-time State Display

 The system equipment have plenty real-time state indicators,including power supply, working state, failure indicators, etc.
The users can check equipments' operation state directly and quickly.
18. Real-Time State Output

 The system host is equipped with failure and working state output interface. The host send real-time operation states of the system,

by connecting with the third-party equipments, which is convenient to monitor the system remotely.

output
19. Two Volume Control Relay Modes

 The relay modes of 3-wired volume control and 4-wired volume control enable the system flexibly applied in different
places to control the volume, and realize the override function.
20. 24V DC Power Supply

 The entire system supports 24V power supply. When the AC power is cut off, the devices automatically check and switch to
the 24V backup power supply to ensure normal use of evacuation system.

Charger VA-6000BC

Battery

Supply power for all devices in the system with 24V DC which is stable
and reliable
Content CONTENT

1 System Introduction 2 Function & Features 3 Product Overview

 System overview  Function & Features  Series

 Signal partition  Products
 Power partition  Applications
Full Series Products of EVAC System

Change over VA-6000MS Digital amplifier Charger VA-6000BC End of line detector Extension panel Fire alarm mic Paging mic
VA-6000T VA-6000EM VA-6000FM VA-6000RM

Management software
VA-6000ST
Controller VA-6000MA 8-zone amp VA-P8500S Recorder VA-6000RC

VA-6000/4240（including VA-6000MA、VA-P8500S、VA-6000RC）
Product Overview of EVAC System

System Host VA-6000MA Front Panel

Alarm indicator

Evacuation indicator

AC Indicator Mode switch

DC indicator

Fault indicator
Reset key

PTT indicator

BGM indicator BGM SD card

PTT interface
Product Overview of EVAC System

System Host VA-6000MA

Features
Fault output/working status
 With 5 inch LCD touch operation display output/reset input

 Support zone selection, zone management and group operation DC24V output
Line input
Short input Short output Mic input Line output
 Support power partitions and signal partitions configuration
 Support event trigger, timing trigger output
 Integrated with 4 independent players
 Support line redundant wiring
 Support 4 remote microphone access
 Support phone notification via event trigger
 With full backup function
 8 channels level signals or short circuirt contact
 Up to 2000 log records
Network port Remote Mic port DC24V input

Telephone port CAN port alarm/evacuation/

clear message SD card
Product Overview of EVAC System
All zone selection

8 Zone Amplifier VA-P8500S AC indicator

Zone output
indicator
Zone status Network EVAC indicator
DC indicator
indicator

Features Amp status indicator

Zone selection
Network BGM indicator

Working indicator Mic/line indicator

 Built in 500W digital amplifier and 8 independent power Audio signal indicator Zone volume control Mic/Line volume
control
zones
 Connect with an external backup amplifier to realize
main/standby switch function
 Automatic real-time monitoring of the working status of
the speaker lines in each zone
Audio input
Speaker 100V input
 8 programmable trigger input / output contacts
 Provide DC 24V backup power input interface
 Support line redundant wiring
DC24V power supply
 Support 3 or 4 wired speaker circuit wiring Mic input
CAN port
Short input

Speaker 100V output Short output

Network port
Backup amplifier
audio input
Product Overview of EVAC System
DC power indicator

Changeover VA-6000MS AC power indicator

Main amplifier status indicator
Network status indicator

Functions
 Support 8 Main/1 Spare amplifier control
CAN port
 Support 3/4 wired speaker circuit wiring
Local audio signal input/output Short-circuit the input/output
 Support redundant wiring
 Support online with linkage fire alarm control
 8 programmable trigger input/output online interfaces
 DC 24V standby power input interface
 Automatic real-time monitoring of the working status of
each partition loop
100V signal input/output
DC24V
Backup power amplifier signal
output 100 v/audio input interface

Network communication interface

Product Overview of EVAC System

Digital Amplifier VA series Power indicator Channel indicator

Functions
 1, 2 and 4 channels are optional, and the maximum
support is 4 * 500W
 Overload and short circuit protection
 Main and standby power amplifier switching
automatically and speaker line state detection
 Auto checking working status of each channel and send
it to host VA-6000MA
 Support 3-wired cabling

DC24V input 100V output Audio signal input

Product Overview of EVAC System

Recorder VA-6000RC
AC power indicator
DC power indicator
Recording status indicator
Functions SD card status indicator

 CAN bus and relay contact are supported

 Support SD card connection status detection
 Voice files are stored on an external SD card with up to
Recording trigger interface Recording input
32 gigabytes
CAN port SD card DC24V
 With DC 24V backup power input
Product Overview of EVAC System
AC power indicator

Charger VA-6000BC DC power indicator

Charging indicator

Voltage high/low indicator

Functions Fault status indicator

 Built-in battery charging management

 Automatically select charging mode
 Suitable for a variety of apacity batteries
 Dual network interface

CAN port
DC24V input

DC24V ouput
Battery capacity selection
Temperature/voltage state input

Address/single mode/matching resistor

Product Overview of EVAC System

Fireman Remote Paging Mic

VA-6000FM

Functions

 8 partition/group options are supported, added to each

extended keyboard for a total of 64 partitions
 One key to quickly enter the emergency broadcast state
 Cat-5 extends the transmission range by 600 meters
 Built-in hi-fi monitor speaker
 Support line redundant wiring, a variety of status
indicators
 Support up to 4 fireman/business remote paging
microphone
Product Overview of EVAC System

Front Panel
Product Overview of EVAC System

Rear Panel

Audio output DC24V input.

Main and spare network interface.
monitor
PTT microphone output
volume adjustment

Power switch

EXT. Line input

Device address Volume monitor
Line input volume
adjustment
Product Overview of EVAC System

Business Remote Paging Mic

VA-6000RM
Functions
 8 partition/group options are supported, added to each
extended keyboard for a total of 64 partitions
 One key to quickly enter the emergency broadcast state
 cat-5 extends the transmission range by 600 meters
 Built-in hi-fi monitor speaker
 Support line redundant wiring, a variety of status
indicators
 Support up to 4 fireman/business remote paging
microphone
Product Overview of EVAC System

Front Panel
Product Overview of EVAC System

Rear Panel

Volume adjustment
Monitor audio output

Monitor the volume adjustment

Power switch

DC24V input
Networking address
Extended line input
volume adjustment
Network master,
standby interface
Product Overview of EVAC System

Paging Microphones Extension Unit

VA-6000EM

Functions

 One MIC can extend up to 7 units

 With 8 keys and partition status indicator for each
extended keyboard
Product Overview of EVAC System

Remote Paging Mic

VA-6000RT

Functions
 IPS high-definition full-angle display; Graphical
touch operation; Clear version
 System synchronization customize display of
zone/group name, with convenient and simple
operation.
 Iconic zone status display, more vivid
expression and richer content
 It can individually adjust the volume of each
zone and monitor current playlist content.
 With one external audio connector on rear
panel and it can play audio source to any zone.
 Support up to 32pcs VA-6000RT microphones
Product Overview of EVAC System

Terminal Detector VA-6000T

Functions
 To be installed at the end of speaker line
 Detect the working state of speaker line
 No need external power supply
Applications for the EVAC System

1. Airport
2. Metro
3. School
4. Hotel
5. Train Station
6. Wharf
7. Shopping Mall
8. Chamber
9. Cinema
10. Stadium
11. Office Building
12. Residence community
......